C malloc() memory space released after program ends? [duplicate] - c

This question already has answers here:
Closed 11 years ago.
Possible Duplicate:
What REALLY happens when you don't free after malloc?
Is freeing allocated memory needed when exiting a program in C
During my first C class, it was drilled into me that I should call free() after malloc() or calloc() as it releases the space after dynamically allocating memory or otherwise it will be gone (I assume until system reboot). However, recently I started reading on various coding sites that this memory will be released back when the program ends.
Which one is the correct statement?
I would look in the official spec, but I have no idea where to get it (tried Googling).
Thanks.

Really short answer..
Both of the statements are correct.
A longer more elaborate one..
Both of them are correct, when your application fully terminates the allocated memory will (probably) be released back to the system.
I wrote "probably" since all modern/widely-used OSes will deallocate the memory used, but some primitive systems might not have this "feature" available.
Because of the above you should always use free to deallocate memory of allocated but unused variables, especially during run-time (otherwise you'll have a memory leak that might/will slowly eat up all available memory).
If you wanna live on the wild side and not deallocate memory before the application terminates, that's fine by me and most people.B ut, please make sure that the platform you are going to run the application in really does release the memory back to the operating system afterwards.
Regarding looking in the standard ("official spec")
The standard most often/always leaves out implementation details, therefor there is nothing in there saying what will happen to allocated memory that hasn't been deallocated when the running application terminates.
That's implementation specific, and therefor depends in/on/at what you are running it.

On any system with protected memory (e.g. Windows 4.x+, Linux, Unix, …), the memory is released when the program terminates.
Some embedded systems may not always do so, however.
Regardless, it's definitely good form to free() everything correctly.

This is valid within the program, that's while the process is running.
Out of it, this is OS dependent. There is no spec, but the big majority of systems will clean up all the memory used by the process after it is finished.

All memory for a given process is released back to the system at its termination. However, before a program exits, it's important to always free() your memory, especially for long-running programs. In short-running programs, it's still good practice. It's always nice when valgrind spits out a clean bill of health!

Related

When do you consider a programme is leaking, and do you have to free before exit? [duplicate]

We are all taught that you MUST free every pointer that is allocated. I'm a bit curious, though, about the real cost of not freeing memory. In some obvious cases, like when malloc() is called inside a loop or part of a thread execution, it's very important to free so there are no memory leaks. But consider the following two examples:
First, if I have code that's something like this:
int main()
{
char *a = malloc(1024);
/* Do some arbitrary stuff with 'a' (no alloc functions) */
return 0;
}
What's the real result here? My thinking is that the process dies and then the heap space is gone anyway so there's no harm in missing the call to free (however, I do recognize the importance of having it anyway for closure, maintainability, and good practice). Am I right in this thinking?
Second, let's say I have a program that acts a bit like a shell. Users can declare variables like aaa = 123 and those are stored in some dynamic data structure for later use. Clearly, it seems obvious that you'd use some solution that will calls some *alloc function (hashmap, linked list, something like that). For this kind of program, it doesn't make sense to ever free after calling malloc because these variables must be present at all times during the program's execution and there's no good way (that I can see) to implement this with statically allocated space. Is it bad design to have a bunch of memory that's allocated but only freed as part of the process ending? If so, what's the alternative?
Just about every modern operating system will recover all the allocated memory space after a program exits. The only exception I can think of might be something like Palm OS where the program's static storage and runtime memory are pretty much the same thing, so not freeing might cause the program to take up more storage. (I'm only speculating here.)
So generally, there's no harm in it, except the runtime cost of having more storage than you need. Certainly in the example you give, you want to keep the memory for a variable that might be used until it's cleared.
However, it's considered good style to free memory as soon as you don't need it any more, and to free anything you still have around on program exit. It's more of an exercise in knowing what memory you're using, and thinking about whether you still need it. If you don't keep track, you might have memory leaks.
On the other hand, the similar admonition to close your files on exit has a much more concrete result - if you don't, the data you wrote to them might not get flushed, or if they're a temp file, they might not get deleted when you're done. Also, database handles should have their transactions committed and then closed when you're done with them. Similarly, if you're using an object oriented language like C++ or Objective C, not freeing an object when you're done with it will mean the destructor will never get called, and any resources the class is responsible might not get cleaned up.
Yes you are right, your example doesn't do any harm (at least not on most modern operating systems). All the memory allocated by your process will be recovered by the operating system once the process exits.
Source: Allocation and GC Myths (PostScript alert!)
Allocation Myth 4: Non-garbage-collected programs
should always deallocate all memory
they allocate.
The Truth: Omitted
deallocations in frequently executed
code cause growing leaks. They are
rarely acceptable. but Programs that
retain most allocated memory until
program exit often perform better
without any intervening deallocation.
Malloc is much easier to implement if
there is no free.
In most cases, deallocating memory
just before program exit is pointless.
The OS will reclaim it anyway. Free
will touch and page in the dead
objects; the OS won't.
Consequence: Be careful with "leak
detectors" that count allocations.
Some "leaks" are good!
That said, you should really try to avoid all memory leaks!
Second question: your design is ok. If you need to store something until your application exits then its ok to do this with dynamic memory allocation. If you don't know the required size upfront, you can't use statically allocated memory.
=== What about future proofing and code reuse? ===
If you don't write the code to free the objects, then you are limiting the code to only being safe to use when you can depend on the memory being free'd by the process being closed ... i.e. small one-time use projects or "throw-away"[1] projects)... where you know when the process will end.
If you do write the code that free()s all your dynamically allocated memory, then you are future proofing the code and letting others use it in a larger project.
[1] regarding "throw-away" projects. Code used in "Throw-away" projects has a way of not being thrown away. Next thing you know ten years have passed and your "throw-away" code is still being used).
I heard a story about some guy who wrote some code just for fun to make his hardware work better. He said "just a hobby, won't be big and professional". Years later lots of people are using his "hobby" code.
You are correct, no harm is done and it's faster to just exit
There are various reasons for this:
All desktop and server environments simply release the entire memory space on exit(). They are unaware of program-internal data structures such as heaps.
Almost all free() implementations do not ever return memory to the operating system anyway.
More importantly, it's a waste of time when done right before exit(). At exit, memory pages and swap space are simply released. By contrast, a series of free() calls will burn CPU time and can result in disk paging operations, cache misses, and cache evictions.
Regarding the possiblility of future code reuse justifing the certainty of pointless ops: that's a consideration but it's arguably not the Agile way. YAGNI!
I completely disagree with everyone who says OP is correct or there is no harm.
Everyone is talking about a modern and/or legacy OS's.
But what if I'm in an environment where I simply have no OS?
Where there isn't anything?
Imagine now you are using thread styled interrupts and allocate memory.
In the C standard ISO/IEC:9899 is the lifetime of memory stated as:
7.20.3 Memory management functions
1 The order and contiguity of storage allocated by successive calls to the calloc,
malloc, and realloc functions is unspecified. The pointer returned if the allocation
succeeds is suitably aligned so that it may be assigned to a pointer to any type of object
and then used to access such an object or an array of such objects in the space allocated
(until the space is explicitly deallocated). The lifetime of an allocated object extends
from the allocation until the deallocation.[...]
So it has not to be given that the environment is doing the freeing job for you.
Otherwise it would be added to the last sentence: "Or until the program terminates."
So in other words:
Not freeing memory is not just bad practice. It produces non portable and not C conform code.
Which can at least be seen as 'correct, if the following: [...], is supported by environment'.
But in cases where you have no OS at all, no one is doing the job for you
(I know generally you don't allocate and reallocate memory on embedded systems,
but there are cases where you may want to.)
So speaking in general plain C (as which the OP is tagged),
this is simply producing erroneous and non portable code.
I typically free every allocated block once I'm sure that I'm done with it. Today, my program's entry point might be main(int argc, char *argv[]) , but tomorrow it might be foo_entry_point(char **args, struct foo *f) and typed as a function pointer.
So, if that happens, I now have a leak.
Regarding your second question, if my program took input like a=5, I would allocate space for a, or re-allocate the same space on a subsequent a="foo". This would remain allocated until:
The user typed 'unset a'
My cleanup function was entered, either servicing a signal or the user typed 'quit'
I can not think of any modern OS that does not reclaim memory after a process exits. Then again, free() is cheap, why not clean up? As others have said, tools like valgrind are great for spotting leaks that you really do need to worry about. Even though the blocks you example would be labeled as 'still reachable' , its just extra noise in the output when you're trying to ensure you have no leaks.
Another myth is "If its in main(), I don't have to free it", this is incorrect. Consider the following:
char *t;
for (i=0; i < 255; i++) {
t = strdup(foo->name);
let_strtok_eat_away_at(t);
}
If that came prior to forking / daemonizing (and in theory running forever), your program has just leaked an undetermined size of t 255 times.
A good, well written program should always clean up after itself. Free all memory, flush all files, close all descriptors, unlink all temporary files, etc. This cleanup function should be reached upon normal termination, or upon receiving various kinds of fatal signals, unless you want to leave some files laying around so you can detect a crash and resume.
Really, be kind to the poor soul who has to maintain your stuff when you move on to other things .. hand it to them 'valgrind clean' :)
It is completely fine to leave memory unfreed when you exit; malloc() allocates the memory from the memory area called "the heap", and the complete heap of a process is freed when the process exits.
That being said, one reason why people still insist that it is good to free everything before exiting is that memory debuggers (e.g. valgrind on Linux) detect the unfreed blocks as memory leaks, and if you have also "real" memory leaks, it becomes more difficult to spot them if you also get "fake" results at the end.
This code will usually work alright, but consider the problem of code reuse.
You may have written some code snippet which doesn't free allocated memory, it is run in such a way that memory is then automatically reclaimed. Seems allright.
Then someone else copies your snippet into his project in such a way that it is executed one thousand times per second. That person now has a huge memory leak in his program. Not very good in general, usually fatal for a server application.
Code reuse is typical in enterprises. Usually the company owns all the code its employees produce and every department may reuse whatever the company owns. So by writing such "innocently-looking" code you cause potential headache to other people. This may get you fired.
What's the real result here?
Your program leaked the memory. Depending on your OS, it may have been recovered.
Most modern desktop operating systems do recover leaked memory at process termination, making it sadly common to ignore the problem (as can be seen by many other answers here.)
But you are relying on a safety feature not being part of the language, one you should not rely upon. Your code might run on a system where this behaviour does result in a "hard" memory leak, next time.
Your code might end up running in kernel mode, or on vintage / embedded operating systems which do not employ memory protection as a tradeoff. (MMUs take up die space, memory protection costs additional CPU cycles, and it is not too much to ask from a programmer to clean up after himself).
You can use and re-use memory (and other resources) any way you like, but make sure you deallocated all resources before exiting.
If you're using the memory you've allocated, then you're not doing anything wrong. It becomes a problem when you write functions (other than main) that allocate memory without freeing it, and without making it available to the rest of your program. Then your program continues running with that memory allocated to it, but no way of using it. Your program and other running programs are deprived of that memory.
Edit: It's not 100% accurate to say that other running programs are deprived of that memory. The operating system can always let them use it at the expense of swapping your program out to virtual memory (</handwaving>). The point is, though, that if your program frees memory that it isn't using then a virtual memory swap is less likely to be necessary.
There's actually a section in the OSTEP online textbook for an undergraduate course in operating systems which discusses exactly your question.
The relevant section is "Forgetting To Free Memory" in the Memory API chapter on page 6 which gives the following explanation:
In some cases, it may seem like not calling free() is reasonable. For
example, your program is short-lived, and will soon exit; in this case,
when the process dies, the OS will clean up all of its allocated pages and
thus no memory leak will take place per se. While this certainly “works”
(see the aside on page 7), it is probably a bad habit to develop, so be wary
of choosing such a strategy
This excerpt is in the context of introducing the concept of virtual memory. Basically at this point in the book, the authors explain that one of the goals of an operating system is to "virtualize memory," that is, to let every program believe that it has access to a very large memory address space.
Behind the scenes, the operating system will translate "virtual addresses" the user sees to actual addresses pointing to physical memory.
However, sharing resources such as physical memory requires the operating system to keep track of what processes are using it. So if a process terminates, then it is within the capabilities and the design goals of the operating system to reclaim the process's memory so that it can redistribute and share the memory with other processes.
EDIT: The aside mentioned in the excerpt is copied below.
ASIDE: WHY NO MEMORY IS LEAKED ONCE YOUR PROCESS EXITS
When you write a short-lived program, you might allocate some space
using malloc(). The program runs and is about to complete: is there
need to call free() a bunch of times just before exiting? While it seems
wrong not to, no memory will be "lost" in any real sense. The reason is
simple: there are really two levels of memory management in the system.
The first level of memory management is performed by the OS, which
hands out memory to processes when they run, and takes it back when
processes exit (or otherwise die). The second level of management
is within each process, for example within the heap when you call
malloc() and free(). Even if you fail to call free() (and thus leak
memory in the heap), the operating system will reclaim all the memory of
the process (including those pages for code, stack, and, as relevant here,
heap) when the program is finished running. No matter what the state
of your heap in your address space, the OS takes back all of those pages
when the process dies, thus ensuring that no memory is lost despite the
fact that you didn’t free it.
Thus, for short-lived programs, leaking memory often does not cause any
operational problems (though it may be considered poor form). When
you write a long-running server (such as a web server or database management
system, which never exit), leaked memory is a much bigger issue,
and will eventually lead to a crash when the application runs out of
memory. And of course, leaking memory is an even larger issue inside
one particular program: the operating system itself. Showing us once
again: those who write the kernel code have the toughest job of all...
from Page 7 of Memory API chapter of
Operating Systems: Three Easy Pieces
Remzi H. Arpaci-Dusseau and Andrea C. Arpaci-Dusseau
Arpaci-Dusseau Books
March, 2015 (Version 0.90)
There's no real danger in not freeing your variables, but if you assign a pointer to a block of memory to a different block of memory without freeing the first block, the first block is no longer accessible but still takes up space. This is what's called a memory leak, and if you do this with regularity then your process will start to consume more and more memory, taking away system resources from other processes.
If the process is short-lived you can often get away with doing this as all allocated memory is reclaimed by the operating system when the process completes, but I would advise getting in the habit of freeing all memory you have no further use for.
You are correct, memory is automatically freed when the process exits. Some people strive not to do extensive cleanup when the process is terminated, since it will all be relinquished to the operating system. However, while your program is running you should free unused memory. If you don't, you may eventually run out or cause excessive paging if your working set gets too big.
You are absolutely correct in that respect. In small trivial programs where a variable must exist until the death of the program, there is no real benefit to deallocating the memory.
In fact, I had once been involved in a project where each execution of the program was very complex but relatively short-lived, and the decision was to just keep memory allocated and not destabilize the project by making mistakes deallocating it.
That being said, in most programs this is not really an option, or it can lead you to run out of memory.
It depends on the scope of the project that you're working on. In the context of your question, and I mean just your question, then it doesn't matter.
For a further explanation (optional), some scenarios I have noticed from this whole discussion is as follow:
(1) - If you're working in an embedded environment where you cannot rely on the main OS' to reclaim the memory for you, then you should free them since memory leaks can really crash the program if done unnoticed.
(2) - If you're working on a personal project where you won't disclose it to anyone else, then you can skip it (assuming you're using it on the main OS') or include it for "best practices" sake.
(3) - If you're working on a project and plan to have it open source, then you need to do more research into your audience and figure out if freeing the memory would be the better choice.
(4) - If you have a large library and your audience consisted of only the main OS', then you don't need to free it as their OS' will help them to do so. In the meantime, by not freeing, your libraries/program may help to make the overall performance snappier since the program does not have to close every data structure, prolonging the shutdown time (imagine a very slow excruciating wait to shut down your computer before leaving the house...)
I can go on and on specifying which course to take, but it ultimately depends on what you want to achieve with your program. Freeing memory is considered good practice in some cases and not so much in some so it ultimately depends on the specific situation you're in and asking the right questions at the right time. Good luck!
If you're developing an application from scratch, you can make some educated choices about when to call free. Your example program is fine: it allocates memory, maybe you have it work for a few seconds, and then closes, freeing all the resources it claimed.
If you're writing anything else, though -- a server/long-running application, or a library to be used by someone else, you should expect to call free on everything you malloc.
Ignoring the pragmatic side for a second, it's much safer to follow the stricter approach, and force yourself to free everything you malloc. If you're not in the habit of watching for memory leaks whenever you code, you could easily spring a few leaks. So in other words, yes -- you can get away without it; please be careful, though.
If a program forgets to free a few Megabytes before it exits the operating system will free them. But if your program runs for weeks at a time and a loop inside the program forgets to free a few bytes in each iteration you will have a mighty memory leak that will eat up all the available memory in your computer unless you reboot it on a regular basis => even small memory leaks might be bad if the program is used for a seriously big task even if it originally wasn't designed for one.
It depends on the OS environment the program is running in, as others have already noted, and for long running processes, freeing memory and avoiding even very slow leaks is important always. But if the operating system deals with stuff, as Unix has done for example since probably forever, then you don't need to free memory, nor close files (the kernel closes all open file descriptors when a process exits.)
If your program allocates a lot of memory, it may even be beneficial to exit without "hesitation". I find that when I quit Firefox, it spends several !minutes ! paging in gigabytes of memory in many processes. I guess this is due to having to call destructors on C++ objects. This is actually terrible. Some might argue, that this is necessary to save state consistently, but in my opinion, long-running interactive programs like browsers, editors and design programs, just to mention a few, should ensure that any state information, preferences, open windows/pages, documents etc is frequently written to permanent storage, to avoid loss of work in case of a crash. Then this state-saving can be performed again quickly when the user elects to quit, and when completed, the processes should just exit immediately.
All memory allocated for this process will be marked unused by OS then reused, because the memory allocation is done by user space functions.
Imagine OS is a god, and the memories is the materials for creating a wolrd of process, god use some of materials creat a world (or to say OS reserved some of memory and create a process in it). No matter what the creatures in this world have done the materials not belong to this world won't be affected. After this world expired, OS the god, can recycle materials allocated for this world.
Modern OS may have different details on releasing user space memory, but that has to be a basic duty of OS.
I think that your two examples are actually only one: the free() should occur only at the end of the process, which as you point out is useless since the process is terminating.
In you second example though, the only difference is that you allow an undefined number of malloc(), which could lead to running out of memory. The only way to handle the situation is to check the return code of malloc() and act accordingly.

ownership of dynamic allocated memory

What is the ownership of the dynamic allocated memory?
For example, in one program dynamic allocate memory like this:
int main()
{
int * p = malloc(10 * sizeof(int));
return 0;
}
1) if this program exit, then will the memory pointed by p be freed()?
I think the answer will be, it will not be freed automatically.
2) if this program crash, then will the memory pointed by p be freed()?
Memory Deallocation And Allocation
This link will help you to a great extent to solve your problem
The text below is from the above mentioned link:-
Just about every modern operating system will recover all the allocated memory space after a program exits. The only exception I can think of might be something like Palm OS where the program's static storage and runtime memory are pretty much the same thing, so not freeing might cause the program to take up more storage. (I'm only speculating here.)
So generally, there's no harm in it, except the runtime cost of having more storage than you need. Certainly in the example you give, you want to keep the memory for a variable that might be used until it's cleared.
However, it's considered good style to free memory as soon as you don't need it any more, and to free anything you still have around on program exit. It's more of an exercise in knowing what memory you're using, and thinking about whether you still need it. If you don't keep track, you might have memory leaks.
On the other hand, the similar admonition to close your files on exit has a much more concrete result - if you don't, the data you wrote to them might not get flushed, or if they're a temp file, they might not get deleted when you're done. Also, database handles should have their transactions committed and then closed when you're done with them. Similarly, if you're using an object oriented language like C++ or Objective C, not freeing an object when you're done with it will mean the destructor will never get called, and any resources the class is responsible might not get cleaned up.
referred : GNU libc manual page for free()
So, according to libc manual
There is no point in freeing blocks at the end of a program, because all of the program’s space is given back to the system when the process terminates.
So even if your program crashed, memory will be freed and given back to system
On linux, as long as the process terminated, all its memory will be freed, for reuse.
If your program runs long term(e.g shell or web server daemon), you should free every piece of memory by hand, otherwise, as time goes the limit of memory might be reached, and you can no long allocate memory.
If your program runs very short, you can leave the free job be done automatically when process terminate. Actually, free() itself also takes time, so this would save some machine resource, even though it's strongly not suggested.
free() every piece of memory by hand, also improve your maintainabiliy & readability of your project for long term.

Does OS reclaim memory on application exit in C? [duplicate]

This question already has answers here:
Closed 10 years ago.
Possible Duplicate:
When you exit a C application, is the malloc-ed memory automatically freed?
Pretty much the title. Do (modern) OSs automatically reclaim heap-allocated memory on program termination? If so, is freeing the memory a strict must or more of a just-follow-the-damn- standard-you-fool kinda thing?
What is the worst thing than can happen if I do not explicitly free the memory except that I end up wasting it while the application is in run?
When an application terminates, all memory will be reclaimed by the OS. The reason people preach memory management techniques is because so long as the app is running, any memory it's asked for will remain in its posession (even if it's no longer being used). Unless, of course, you were nice enough to call free.
if the app terminates the os will clean up the memory and resources.
if you do not clean up memory with free( ) then heap-allocated memory will be used up as you request more and more. if it continues, the os will start using swap/page file to allocate. it u still continue os will grind down to a halt, or terminate the app with some kind of error
Does OS reclaim memory on application exit in C? Yes.
If you don't free memory: your application may run out of memory & crash.
Freeing memory before exiting is optional because the o/s will clean up for you.
Freeing unused memory while running is a good idea; it prevents the application from running out of memory (and having to exit). The difficulty is often working out which memory is unused.
Yes. But if your program is a long running program, you not only crash your program eventually, but as the time progresses, you will also slowdown the system, assuming you use too much memory.

Is freeing allocated memory needed when exiting a program in C

If I allocated memory in my C program using malloc and now I want to exit, do I have to free the allocated memory, or can I assume that since my entire program terminates, it will be freed by the OS?
I run in Linux environment.
Any modern operating system will clean up everything after a process terminates, but it's generally not a good practice to rely on this.
It depends on the program you are writing. If it's just a command line tool that runs and terminates quickly, you may not bother cleaning up. But be aware that it is this mindset that causes memory leaks in daemons and long-running programs.
It can be a good design and very efficient to simply exit and allow the operating system to clean everything up. Apple OS X now does this by default: applications are killed without notice unless the application sets a "don't kill me" flag.
Often, freeing every memory allocation takes significant time. Some memory pages may have been swapped out and must be read back in so they can be marked as free. The memory allocator has to do a lot of work updating free memory tracking data. All of this effort is a waste because the program is exiting.
But this must be done by design and not because the programmer has lost track of allocated memory!
In any case it will be freed by the operating system upon process termination. So you don't need it, but since it is a good practice, why don't you do it anyway? :)
Actually with complex code I wouldn't risk to don't release something which I'm not sure at 100% that will be useless because program exits afterwards. So for any minimal doubt just free it.
Yes you can assume that.
Although it is a good practice to deallocate the memory immediately after it is not needed, even for software that runs for a short time only.
The operating system will reclaim the memory so you don't need to free it.
Most programs do free memory though because if you don't free any memory then you are liable to have problems caused by these intentional leaks.
Linux will free the allocated memory and close the file descriptors on process termination.
The OS will reclaim the memory, however it's good practice to free things if you expect they'll run out of scope before you malloc something else. However, you can more or less rely upon the termination of the program to deal with memory management for you.
Always free your allocated memory since that the operating system will hold less memory for no reason. It is very noticed in small operating systems that holds small memory size.

What REALLY happens when you don't free after malloc before program termination?

We are all taught that you MUST free every pointer that is allocated. I'm a bit curious, though, about the real cost of not freeing memory. In some obvious cases, like when malloc() is called inside a loop or part of a thread execution, it's very important to free so there are no memory leaks. But consider the following two examples:
First, if I have code that's something like this:
int main()
{
char *a = malloc(1024);
/* Do some arbitrary stuff with 'a' (no alloc functions) */
return 0;
}
What's the real result here? My thinking is that the process dies and then the heap space is gone anyway so there's no harm in missing the call to free (however, I do recognize the importance of having it anyway for closure, maintainability, and good practice). Am I right in this thinking?
Second, let's say I have a program that acts a bit like a shell. Users can declare variables like aaa = 123 and those are stored in some dynamic data structure for later use. Clearly, it seems obvious that you'd use some solution that will calls some *alloc function (hashmap, linked list, something like that). For this kind of program, it doesn't make sense to ever free after calling malloc because these variables must be present at all times during the program's execution and there's no good way (that I can see) to implement this with statically allocated space. Is it bad design to have a bunch of memory that's allocated but only freed as part of the process ending? If so, what's the alternative?
Just about every modern operating system will recover all the allocated memory space after a program exits. The only exception I can think of might be something like Palm OS where the program's static storage and runtime memory are pretty much the same thing, so not freeing might cause the program to take up more storage. (I'm only speculating here.)
So generally, there's no harm in it, except the runtime cost of having more storage than you need. Certainly in the example you give, you want to keep the memory for a variable that might be used until it's cleared.
However, it's considered good style to free memory as soon as you don't need it any more, and to free anything you still have around on program exit. It's more of an exercise in knowing what memory you're using, and thinking about whether you still need it. If you don't keep track, you might have memory leaks.
On the other hand, the similar admonition to close your files on exit has a much more concrete result - if you don't, the data you wrote to them might not get flushed, or if they're a temp file, they might not get deleted when you're done. Also, database handles should have their transactions committed and then closed when you're done with them. Similarly, if you're using an object oriented language like C++ or Objective C, not freeing an object when you're done with it will mean the destructor will never get called, and any resources the class is responsible might not get cleaned up.
Yes you are right, your example doesn't do any harm (at least not on most modern operating systems). All the memory allocated by your process will be recovered by the operating system once the process exits.
Source: Allocation and GC Myths (PostScript alert!)
Allocation Myth 4: Non-garbage-collected programs
should always deallocate all memory
they allocate.
The Truth: Omitted
deallocations in frequently executed
code cause growing leaks. They are
rarely acceptable. but Programs that
retain most allocated memory until
program exit often perform better
without any intervening deallocation.
Malloc is much easier to implement if
there is no free.
In most cases, deallocating memory
just before program exit is pointless.
The OS will reclaim it anyway. Free
will touch and page in the dead
objects; the OS won't.
Consequence: Be careful with "leak
detectors" that count allocations.
Some "leaks" are good!
That said, you should really try to avoid all memory leaks!
Second question: your design is ok. If you need to store something until your application exits then its ok to do this with dynamic memory allocation. If you don't know the required size upfront, you can't use statically allocated memory.
=== What about future proofing and code reuse? ===
If you don't write the code to free the objects, then you are limiting the code to only being safe to use when you can depend on the memory being free'd by the process being closed ... i.e. small one-time use projects or "throw-away"[1] projects)... where you know when the process will end.
If you do write the code that free()s all your dynamically allocated memory, then you are future proofing the code and letting others use it in a larger project.
[1] regarding "throw-away" projects. Code used in "Throw-away" projects has a way of not being thrown away. Next thing you know ten years have passed and your "throw-away" code is still being used).
I heard a story about some guy who wrote some code just for fun to make his hardware work better. He said "just a hobby, won't be big and professional". Years later lots of people are using his "hobby" code.
You are correct, no harm is done and it's faster to just exit
There are various reasons for this:
All desktop and server environments simply release the entire memory space on exit(). They are unaware of program-internal data structures such as heaps.
Almost all free() implementations do not ever return memory to the operating system anyway.
More importantly, it's a waste of time when done right before exit(). At exit, memory pages and swap space are simply released. By contrast, a series of free() calls will burn CPU time and can result in disk paging operations, cache misses, and cache evictions.
Regarding the possiblility of future code reuse justifing the certainty of pointless ops: that's a consideration but it's arguably not the Agile way. YAGNI!
I completely disagree with everyone who says OP is correct or there is no harm.
Everyone is talking about a modern and/or legacy OS's.
But what if I'm in an environment where I simply have no OS?
Where there isn't anything?
Imagine now you are using thread styled interrupts and allocate memory.
In the C standard ISO/IEC:9899 is the lifetime of memory stated as:
7.20.3 Memory management functions
1 The order and contiguity of storage allocated by successive calls to the calloc,
malloc, and realloc functions is unspecified. The pointer returned if the allocation
succeeds is suitably aligned so that it may be assigned to a pointer to any type of object
and then used to access such an object or an array of such objects in the space allocated
(until the space is explicitly deallocated). The lifetime of an allocated object extends
from the allocation until the deallocation.[...]
So it has not to be given that the environment is doing the freeing job for you.
Otherwise it would be added to the last sentence: "Or until the program terminates."
So in other words:
Not freeing memory is not just bad practice. It produces non portable and not C conform code.
Which can at least be seen as 'correct, if the following: [...], is supported by environment'.
But in cases where you have no OS at all, no one is doing the job for you
(I know generally you don't allocate and reallocate memory on embedded systems,
but there are cases where you may want to.)
So speaking in general plain C (as which the OP is tagged),
this is simply producing erroneous and non portable code.
I typically free every allocated block once I'm sure that I'm done with it. Today, my program's entry point might be main(int argc, char *argv[]) , but tomorrow it might be foo_entry_point(char **args, struct foo *f) and typed as a function pointer.
So, if that happens, I now have a leak.
Regarding your second question, if my program took input like a=5, I would allocate space for a, or re-allocate the same space on a subsequent a="foo". This would remain allocated until:
The user typed 'unset a'
My cleanup function was entered, either servicing a signal or the user typed 'quit'
I can not think of any modern OS that does not reclaim memory after a process exits. Then again, free() is cheap, why not clean up? As others have said, tools like valgrind are great for spotting leaks that you really do need to worry about. Even though the blocks you example would be labeled as 'still reachable' , its just extra noise in the output when you're trying to ensure you have no leaks.
Another myth is "If its in main(), I don't have to free it", this is incorrect. Consider the following:
char *t;
for (i=0; i < 255; i++) {
t = strdup(foo->name);
let_strtok_eat_away_at(t);
}
If that came prior to forking / daemonizing (and in theory running forever), your program has just leaked an undetermined size of t 255 times.
A good, well written program should always clean up after itself. Free all memory, flush all files, close all descriptors, unlink all temporary files, etc. This cleanup function should be reached upon normal termination, or upon receiving various kinds of fatal signals, unless you want to leave some files laying around so you can detect a crash and resume.
Really, be kind to the poor soul who has to maintain your stuff when you move on to other things .. hand it to them 'valgrind clean' :)
It is completely fine to leave memory unfreed when you exit; malloc() allocates the memory from the memory area called "the heap", and the complete heap of a process is freed when the process exits.
That being said, one reason why people still insist that it is good to free everything before exiting is that memory debuggers (e.g. valgrind on Linux) detect the unfreed blocks as memory leaks, and if you have also "real" memory leaks, it becomes more difficult to spot them if you also get "fake" results at the end.
This code will usually work alright, but consider the problem of code reuse.
You may have written some code snippet which doesn't free allocated memory, it is run in such a way that memory is then automatically reclaimed. Seems allright.
Then someone else copies your snippet into his project in such a way that it is executed one thousand times per second. That person now has a huge memory leak in his program. Not very good in general, usually fatal for a server application.
Code reuse is typical in enterprises. Usually the company owns all the code its employees produce and every department may reuse whatever the company owns. So by writing such "innocently-looking" code you cause potential headache to other people. This may get you fired.
What's the real result here?
Your program leaked the memory. Depending on your OS, it may have been recovered.
Most modern desktop operating systems do recover leaked memory at process termination, making it sadly common to ignore the problem (as can be seen by many other answers here.)
But you are relying on a safety feature not being part of the language, one you should not rely upon. Your code might run on a system where this behaviour does result in a "hard" memory leak, next time.
Your code might end up running in kernel mode, or on vintage / embedded operating systems which do not employ memory protection as a tradeoff. (MMUs take up die space, memory protection costs additional CPU cycles, and it is not too much to ask from a programmer to clean up after himself).
You can use and re-use memory (and other resources) any way you like, but make sure you deallocated all resources before exiting.
If you're using the memory you've allocated, then you're not doing anything wrong. It becomes a problem when you write functions (other than main) that allocate memory without freeing it, and without making it available to the rest of your program. Then your program continues running with that memory allocated to it, but no way of using it. Your program and other running programs are deprived of that memory.
Edit: It's not 100% accurate to say that other running programs are deprived of that memory. The operating system can always let them use it at the expense of swapping your program out to virtual memory (</handwaving>). The point is, though, that if your program frees memory that it isn't using then a virtual memory swap is less likely to be necessary.
There's actually a section in the OSTEP online textbook for an undergraduate course in operating systems which discusses exactly your question.
The relevant section is "Forgetting To Free Memory" in the Memory API chapter on page 6 which gives the following explanation:
In some cases, it may seem like not calling free() is reasonable. For
example, your program is short-lived, and will soon exit; in this case,
when the process dies, the OS will clean up all of its allocated pages and
thus no memory leak will take place per se. While this certainly “works”
(see the aside on page 7), it is probably a bad habit to develop, so be wary
of choosing such a strategy
This excerpt is in the context of introducing the concept of virtual memory. Basically at this point in the book, the authors explain that one of the goals of an operating system is to "virtualize memory," that is, to let every program believe that it has access to a very large memory address space.
Behind the scenes, the operating system will translate "virtual addresses" the user sees to actual addresses pointing to physical memory.
However, sharing resources such as physical memory requires the operating system to keep track of what processes are using it. So if a process terminates, then it is within the capabilities and the design goals of the operating system to reclaim the process's memory so that it can redistribute and share the memory with other processes.
EDIT: The aside mentioned in the excerpt is copied below.
ASIDE: WHY NO MEMORY IS LEAKED ONCE YOUR PROCESS EXITS
When you write a short-lived program, you might allocate some space
using malloc(). The program runs and is about to complete: is there
need to call free() a bunch of times just before exiting? While it seems
wrong not to, no memory will be "lost" in any real sense. The reason is
simple: there are really two levels of memory management in the system.
The first level of memory management is performed by the OS, which
hands out memory to processes when they run, and takes it back when
processes exit (or otherwise die). The second level of management
is within each process, for example within the heap when you call
malloc() and free(). Even if you fail to call free() (and thus leak
memory in the heap), the operating system will reclaim all the memory of
the process (including those pages for code, stack, and, as relevant here,
heap) when the program is finished running. No matter what the state
of your heap in your address space, the OS takes back all of those pages
when the process dies, thus ensuring that no memory is lost despite the
fact that you didn’t free it.
Thus, for short-lived programs, leaking memory often does not cause any
operational problems (though it may be considered poor form). When
you write a long-running server (such as a web server or database management
system, which never exit), leaked memory is a much bigger issue,
and will eventually lead to a crash when the application runs out of
memory. And of course, leaking memory is an even larger issue inside
one particular program: the operating system itself. Showing us once
again: those who write the kernel code have the toughest job of all...
from Page 7 of Memory API chapter of
Operating Systems: Three Easy Pieces
Remzi H. Arpaci-Dusseau and Andrea C. Arpaci-Dusseau
Arpaci-Dusseau Books
March, 2015 (Version 0.90)
There's no real danger in not freeing your variables, but if you assign a pointer to a block of memory to a different block of memory without freeing the first block, the first block is no longer accessible but still takes up space. This is what's called a memory leak, and if you do this with regularity then your process will start to consume more and more memory, taking away system resources from other processes.
If the process is short-lived you can often get away with doing this as all allocated memory is reclaimed by the operating system when the process completes, but I would advise getting in the habit of freeing all memory you have no further use for.
You are correct, memory is automatically freed when the process exits. Some people strive not to do extensive cleanup when the process is terminated, since it will all be relinquished to the operating system. However, while your program is running you should free unused memory. If you don't, you may eventually run out or cause excessive paging if your working set gets too big.
You are absolutely correct in that respect. In small trivial programs where a variable must exist until the death of the program, there is no real benefit to deallocating the memory.
In fact, I had once been involved in a project where each execution of the program was very complex but relatively short-lived, and the decision was to just keep memory allocated and not destabilize the project by making mistakes deallocating it.
That being said, in most programs this is not really an option, or it can lead you to run out of memory.
It depends on the scope of the project that you're working on. In the context of your question, and I mean just your question, then it doesn't matter.
For a further explanation (optional), some scenarios I have noticed from this whole discussion is as follow:
(1) - If you're working in an embedded environment where you cannot rely on the main OS' to reclaim the memory for you, then you should free them since memory leaks can really crash the program if done unnoticed.
(2) - If you're working on a personal project where you won't disclose it to anyone else, then you can skip it (assuming you're using it on the main OS') or include it for "best practices" sake.
(3) - If you're working on a project and plan to have it open source, then you need to do more research into your audience and figure out if freeing the memory would be the better choice.
(4) - If you have a large library and your audience consisted of only the main OS', then you don't need to free it as their OS' will help them to do so. In the meantime, by not freeing, your libraries/program may help to make the overall performance snappier since the program does not have to close every data structure, prolonging the shutdown time (imagine a very slow excruciating wait to shut down your computer before leaving the house...)
I can go on and on specifying which course to take, but it ultimately depends on what you want to achieve with your program. Freeing memory is considered good practice in some cases and not so much in some so it ultimately depends on the specific situation you're in and asking the right questions at the right time. Good luck!
If you're developing an application from scratch, you can make some educated choices about when to call free. Your example program is fine: it allocates memory, maybe you have it work for a few seconds, and then closes, freeing all the resources it claimed.
If you're writing anything else, though -- a server/long-running application, or a library to be used by someone else, you should expect to call free on everything you malloc.
Ignoring the pragmatic side for a second, it's much safer to follow the stricter approach, and force yourself to free everything you malloc. If you're not in the habit of watching for memory leaks whenever you code, you could easily spring a few leaks. So in other words, yes -- you can get away without it; please be careful, though.
If a program forgets to free a few Megabytes before it exits the operating system will free them. But if your program runs for weeks at a time and a loop inside the program forgets to free a few bytes in each iteration you will have a mighty memory leak that will eat up all the available memory in your computer unless you reboot it on a regular basis => even small memory leaks might be bad if the program is used for a seriously big task even if it originally wasn't designed for one.
It depends on the OS environment the program is running in, as others have already noted, and for long running processes, freeing memory and avoiding even very slow leaks is important always. But if the operating system deals with stuff, as Unix has done for example since probably forever, then you don't need to free memory, nor close files (the kernel closes all open file descriptors when a process exits.)
If your program allocates a lot of memory, it may even be beneficial to exit without "hesitation". I find that when I quit Firefox, it spends several !minutes ! paging in gigabytes of memory in many processes. I guess this is due to having to call destructors on C++ objects. This is actually terrible. Some might argue, that this is necessary to save state consistently, but in my opinion, long-running interactive programs like browsers, editors and design programs, just to mention a few, should ensure that any state information, preferences, open windows/pages, documents etc is frequently written to permanent storage, to avoid loss of work in case of a crash. Then this state-saving can be performed again quickly when the user elects to quit, and when completed, the processes should just exit immediately.
All memory allocated for this process will be marked unused by OS then reused, because the memory allocation is done by user space functions.
Imagine OS is a god, and the memories is the materials for creating a wolrd of process, god use some of materials creat a world (or to say OS reserved some of memory and create a process in it). No matter what the creatures in this world have done the materials not belong to this world won't be affected. After this world expired, OS the god, can recycle materials allocated for this world.
Modern OS may have different details on releasing user space memory, but that has to be a basic duty of OS.
I think that your two examples are actually only one: the free() should occur only at the end of the process, which as you point out is useless since the process is terminating.
In you second example though, the only difference is that you allow an undefined number of malloc(), which could lead to running out of memory. The only way to handle the situation is to check the return code of malloc() and act accordingly.

Resources