I'm trying to create a new view in CAL.
I know that I can use the IClearTool interface to set up the view via an appropriate command line, but am wondering if there is also a way to do it via the IClearCase interface. The documentation suggests that it's not possible, but I'd like to be sure. :)
No I didn't see any obvious way to create a view other than using a cleartool command.
This old example is actually using IClearCase... to get Cleartool:
ClearCase.ClearTool CT = new ClearCase.ClearTool();
string result;
result = CT.CmdExec("mkview -tag " + ViewName + " -stgloc -auto");
Related
I need to support database logging.
For that I decided to use nlog because it brings database support.
But first of all I need to setup the configuration programatically.
As far as I understood it I have to set the layout for the target.
But the class "DatabaseTarget" does not have any property related to Layout :/.
var dbTarget = new DatabaseTarget();
dbTarget.ConnectionString = LogConnectionString;
dbTarget.CommandType = System.Data.CommandType.StoredProcedure;
dbTarget.CommandText = "exec dbo.InsertLog #level=${level}, #callSite=${callsite}, #message=${message}, #stackTrace=${stacktrace}, #machinename=${machinename}, #processname=${processname}";
Is the layout definition really necessary for the DatabaseTarget. If so how do I set it programatically?
Additionally I want to pass some information. But I am not sure how I can assign those informations for the procedure.
As far as I understood it I can assign those variables:
https://github.com/nlog/nlog/wiki/Layout-Renderers
But NLog support generic arguments with his Log Method. It looks like this:
_nLog.Log<AJourFaultLevel>(ConvertLogLevel(logEntry.Level), logEntry.Message, logEntry.Fault);
How can I assign the passed "logEntry.Fault" value for my stored procedure?
Best regards
Your current log-statement injects logEntry.Fault as parameter into string.Format(logEntry.Message, logEntry.Fault):
_nLog.Log<AJourFaultLevel>(ConvertLogLevel(logEntry.Level), logEntry.Message, logEntry.Fault);
If you are using NLog 4.5 then you can use structured-logging where you can name the parameter like this:
_nLog.Log<AJourFaultLevel>(ConvertLogLevel(logEntry.Level), "Fault occurred: {AJourFaultLevel}", logEntry.Fault);
Then you can access the named parameter using ${event-properties:item=}:
dbTarget.CommandText = "exec dbo.InsertLog #level=${level}, #callSite=${callsite}, #message=${message}, #stackTrace=${stacktrace}, #machinename=${machinename}, #processname=${processname}, #faultLevel=${event-properties:item=AJourFaultLevel}";
I need to create file screen exception in powershell using the FSRM Api, I am using this script to create the cuota but I am having trouble to commit the object.
Because I haven't achieved to meet the requirement to modify AllowedFileGroups property :(
$FSRMObject = New-Object -Com Fsrm.FsrmFilescreenManager
$createFileScreenException = $FSRMObject.CreateFileScreenException("c:\")
$createFileScreenException.AllowedFileGroups("Text Files")
$createFileScreenException.Commit()
This is what I get Listing the Properties and Methods of the Object, in the property definition of AllowedFileGroups I can see that I need to create IFsrmMutableCollection.
Does anyone have an idea of how to create the file screen exception?
AllowedFileGroups is a property, not a method, so I'd expect something like this to work:
$createFileScreenException = $FSRMObject.CreateFileScreenException('c:\')
$createFileScreenException.AllowedFileGroups = 'Text Files'
$createFileScreenException.Commit()
Can't test it, though.
This is how you can create the simplest quota using the FSRM api in powershell, to view more modificable options get the members of the object $quota.
$fsrmQuotaObject = New-Object -Com FSrm.FsrmQuotaManager
$quota = $fsrmQuotaObject.CreateQuota("c:\path")
$quota.ApplyTemplate("Select template")
$quota.Commit()
Could some one please tell me Is there any way to create a Task/Change Request/Work Package in MKS Integrity using Java API?
We have an xml file with all the details about Task. By taking this as Input, need to generate a Task/Change Request/Work Package.
The Integrity Java API is basically a structured command line interface, so if you can construct a standard Integrity command (with parameters & options) to create the item, you can easily use the API to create the item also. NOTE: This works for most commands, but not all.
For example:
If your command line is:
im createissue --type=Task --State=Submitted --field=Summary="Test summary"
You could do the same with the following code:
Command cmd = new Command(Command.IM, "createissue");
cmd.addOption(new Option("type", "Task"));
cmd.addOption(new Option("state", "Submitted");
MultiValue mv = new MultiValue("=");
mv.add("Summary");
mv.add("Test Summary");
cmd.addOption("field", mv);
Then run the command using a CommandRunner.
You can get more assitance in the PTC Integrity community site (https://www.ptcusercommunity.com/community/integrity).
You can create the Task by using the below command line interface
im createissue --type=Task --field=State=Submitted --field=Summary="Test summary"
The type field specifies the issue type to create. Your administrator defines issue types and this option is mandatory.
I would like to achieve dictionary like data pattern that can be accessed from the
java script. Something like this:
pseudo Code:
for all records:
{
rec = //Get the Record
rec["Name"]
rec["Address"]
}
I am trying to achieve with CefV8Accessor, but i am not getting near to the solution.
Kindly provide few links for the reference, as i see the documentation is very less from chromium embedded.
If I understand correctly, you're trying to create a JS "dictionary" object for CEF using C++. If so, here's a code snippet that does that:
CefRefPtr<CefV8Value> GetDictionary(__in const wstring& sName, __in const wstring& sAddress)
{
CefRefPtr<CefV8Value> objectJS = CefV8Value::CreateObject(NULL);
objectJS->SetValue(L"Name", sName, V8_PROPERTY_ATTRIBUTE_NONE);
objectJS->SetValue(L"Address", sAddress, V8_PROPERTY_ATTRIBUTE_NONE);
return objectJS;
}
The CefV8Accessor can also be used for that matter, but that's only if you want specific control over the set & get methods, to create a new type of object.
In that case you should create a class that inherits CefV8Accessor, implement the Set and Get methods (in a similar way to what appears in the code above), and pass it to the CreateObject method. The return value would be an instance of that new type of object.
I strongly suggest to browse through this link, if you haven't already.
I want to access two databases in Play Scala with anorm and Magic[T], (one is H2 and another is PostgreSQL). I just don't know how to config it...
I noticed that we can set another database connection in conf/application.conf
db_other.url=jdbc:mysql://localhost/test
db_other.driver=com.mysql.jdbc.Driver
db_other.user=root
db_other.pass=
However, how can I use it with Magic?
(I read the source code of Magic but don't understand it... my am a freshman of Scala)
Anyhow, if multiple database access is impossible with Magic[T] , I wish to do it with anorm, then how can I config it?
var sqlQuery = SQL( //I guess some config params should be set here, but how?
"""
select * from Country
"""
)
In play.api.db.DB it appears you can pass in a string of the name you defined in application.conf.
Then use one of the methods specified here: http://www.playframework.org/documentation/2.0/ScalaDatabase
# play.api.db.DB.class
def withConnection[A](name : scala.Predef.String)(block : scala.Function1[java.sql.Connection, A])(implicit app : play.api.Application) : A = { /* compiled code */ }