Related
I wrote this function to read a line from a file:
const char *readLine(FILE *file) {
if (file == NULL) {
printf("Error: file pointer is null.");
exit(1);
}
int maximumLineLength = 128;
char *lineBuffer = (char *)malloc(sizeof(char) * maximumLineLength);
if (lineBuffer == NULL) {
printf("Error allocating memory for line buffer.");
exit(1);
}
char ch = getc(file);
int count = 0;
while ((ch != '\n') && (ch != EOF)) {
if (count == maximumLineLength) {
maximumLineLength += 128;
lineBuffer = realloc(lineBuffer, maximumLineLength);
if (lineBuffer == NULL) {
printf("Error reallocating space for line buffer.");
exit(1);
}
}
lineBuffer[count] = ch;
count++;
ch = getc(file);
}
lineBuffer[count] = '\0';
char line[count + 1];
strncpy(line, lineBuffer, (count + 1));
free(lineBuffer);
const char *constLine = line;
return constLine;
}
The function reads the file correctly, and using printf I see that the constLine string did get read correctly as well.
However, if I use the function e.g. like this:
while (!feof(myFile)) {
const char *line = readLine(myFile);
printf("%s\n", line);
}
printf outputs gibberish. Why?
If your task is not to invent the line-by-line reading function, but just to read the file line-by-line, you may use a typical code snippet involving the getline() function (see the manual page here):
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
int main(void)
{
FILE * fp;
char * line = NULL;
size_t len = 0;
ssize_t read;
fp = fopen("/etc/motd", "r");
if (fp == NULL)
exit(EXIT_FAILURE);
while ((read = getline(&line, &len, fp)) != -1) {
printf("Retrieved line of length %zu:\n", read);
printf("%s", line);
}
fclose(fp);
if (line)
free(line);
exit(EXIT_SUCCESS);
}
FILE* filePointer;
int bufferLength = 255;
char buffer[bufferLength]; /* not ISO 90 compatible */
filePointer = fopen("file.txt", "r");
while(fgets(buffer, bufferLength, filePointer)) {
printf("%s\n", buffer);
}
fclose(filePointer);
In your readLine function, you return a pointer to the line array (Strictly speaking, a pointer to its first character, but the difference is irrelevant here). Since it's an automatic variable (i.e., it's “on the stack”), the memory is reclaimed when the function returns. You see gibberish because printf has put its own stuff on the stack.
You need to return a dynamically allocated buffer from the function. You already have one, it's lineBuffer; all you have to do is truncate it to the desired length.
lineBuffer[count] = '\0';
realloc(lineBuffer, count + 1);
return lineBuffer;
}
ADDED (response to follow-up question in comment): readLine returns a pointer to the characters that make up the line. This pointer is what you need to work with the contents of the line. It's also what you must pass to free when you've finished using the memory taken by these characters. Here's how you might use the readLine function:
char *line = readLine(file);
printf("LOG: read a line: %s\n", line);
if (strchr(line, 'a')) { puts("The line contains an a"); }
/* etc. */
free(line);
/* After this point, the memory allocated for the line has been reclaimed.
You can't use the value of `line` again (though you can assign a new value
to the `line` variable if you want). */
//open and get the file handle
FILE* fh;
fopen_s(&fh, filename, "r");
//check if file exists
if (fh == NULL){
printf("file does not exists %s", filename);
return 0;
}
//read line by line
const size_t line_size = 300;
char* line = malloc(line_size);
while (fgets(line, line_size, fh) != NULL) {
printf(line);
}
free(line); // dont forget to free heap memory
A complete, fgets() solution:
#include <stdio.h>
#include <string.h>
#define MAX_LEN 256
int main(void)
{
FILE* fp;
fp = fopen("file.txt", "r");
if (fp == NULL) {
perror("Failed: ");
return 1;
}
char buffer[MAX_LEN];
while (fgets(buffer, MAX_LEN, fp))
{
// Remove trailing newline
buffer[strcspn(buffer, "\n")] = 0;
printf("%s\n", buffer);
}
fclose(fp);
return 0;
}
Output:
First line of file
Second line of file
Third (and also last) line of file
Remember, if you want to read from Standard Input (rather than a file as in this case), then all you have to do is pass stdin as the third parameter of fgets() method, like this:
while(fgets(buffer, MAX_LEN, stdin))
Appendix
Removing trailing newline character from fgets() input
how to detect a file is opened or not in c
readLine() returns pointer to local variable, which causes undefined behaviour.
To get around you can:
Create variable in caller function and pass its address to readLine()
Allocate memory for line using malloc() - in this case line will be persistent
Use global variable, although it is generally a bad practice
Use fgets() to read a line from a file handle.
Some things wrong with the example:
you forgot to add \n to your printfs. Also error messages should go to stderr i.e. fprintf(stderr, ....
(not a biggy but) consider using fgetc() rather than getc(). getc() is a macro, fgetc() is a proper function
getc() returns an int so ch should be declared as an int. This is important since the comparison with EOF will be handled correctly. Some 8 bit character sets use 0xFF as a valid character (ISO-LATIN-1 would be an example) and EOF which is -1, will be 0xFF if assigned to a char.
There is a potential buffer overflow at the line
lineBuffer[count] = '\0';
If the line is exactly 128 characters long, count is 128 at the point that gets executed.
As others have pointed out, line is a locally declared array. You can't return a pointer to it.
strncpy(count + 1) will copy at most count + 1 characters but will terminate if it hits '\0' Because you set lineBuffer[count] to '\0' you know it will never get to count + 1. However, if it did, it would not put a terminating '\0' on, so you need to do it. You often see something like the following:
char buffer [BUFFER_SIZE];
strncpy(buffer, sourceString, BUFFER_SIZE - 1);
buffer[BUFFER_SIZE - 1] = '\0';
if you malloc() a line to return (in place of your local char array), your return type should be char* - drop the const.
Here is my several hours... Reading whole file line by line.
char * readline(FILE *fp, char *buffer)
{
int ch;
int i = 0;
size_t buff_len = 0;
buffer = malloc(buff_len + 1);
if (!buffer) return NULL; // Out of memory
while ((ch = fgetc(fp)) != '\n' && ch != EOF)
{
buff_len++;
void *tmp = realloc(buffer, buff_len + 1);
if (tmp == NULL)
{
free(buffer);
return NULL; // Out of memory
}
buffer = tmp;
buffer[i] = (char) ch;
i++;
}
buffer[i] = '\0';
// Detect end
if (ch == EOF && (i == 0 || ferror(fp)))
{
free(buffer);
return NULL;
}
return buffer;
}
void lineByline(FILE * file){
char *s;
while ((s = readline(file, 0)) != NULL)
{
puts(s);
free(s);
printf("\n");
}
}
int main()
{
char *fileName = "input-1.txt";
FILE* file = fopen(fileName, "r");
lineByline(file);
return 0;
}
const char *readLine(FILE *file, char* line) {
if (file == NULL) {
printf("Error: file pointer is null.");
exit(1);
}
int maximumLineLength = 128;
char *lineBuffer = (char *)malloc(sizeof(char) * maximumLineLength);
if (lineBuffer == NULL) {
printf("Error allocating memory for line buffer.");
exit(1);
}
char ch = getc(file);
int count = 0;
while ((ch != '\n') && (ch != EOF)) {
if (count == maximumLineLength) {
maximumLineLength += 128;
lineBuffer = realloc(lineBuffer, maximumLineLength);
if (lineBuffer == NULL) {
printf("Error reallocating space for line buffer.");
exit(1);
}
}
lineBuffer[count] = ch;
count++;
ch = getc(file);
}
lineBuffer[count] = '\0';
char line[count + 1];
strncpy(line, lineBuffer, (count + 1));
free(lineBuffer);
return line;
}
char linebuffer[256];
while (!feof(myFile)) {
const char *line = readLine(myFile, linebuffer);
printf("%s\n", line);
}
note that the 'line' variable is declared in calling function and then passed, so your readLine function fills predefined buffer and just returns it. This is the way most of C libraries work.
There are other ways, which I'm aware of:
defining the char line[] as static
(static char line[MAX_LINE_LENGTH]
-> it will hold it's value AFTER returning from the function). -> bad,
the function is not reentrant, and
race condition can occur -> if you
call it twice from two threads, it
will overwrite it's results
malloc()ing the char line[], and
freeing it in calling functions ->
too many expensive mallocs, and,
delegating the responsibility to free the buffer to another function (the most elegant solution is to call malloc and free on any buffers in same function)
btw, 'explicit' casting from char* to const char* is redundant.
btw2, there is no need to malloc() the lineBuffer, just define it char lineBuffer[128], so you don't need to free it
btw3 do not use 'dynamic sized stack arrays' (defining the array as char arrayName[some_nonconstant_variable]), if you don't exactly know what are you doing, it works only in C99.
void readLine(FILE* file, char* line, int limit)
{
int i;
int read;
read = fread(line, sizeof(char), limit, file);
line[read] = '\0';
for(i = 0; i <= read;i++)
{
if('\0' == line[i] || '\n' == line[i] || '\r' == line[i])
{
line[i] = '\0';
break;
}
}
if(i != read)
{
fseek(file, i - read + 1, SEEK_CUR);
}
}
what about this one?
Implement method to read, and get content from a file (input1.txt)
#include <stdio.h>
#include <stdlib.h>
void testGetFile() {
// open file
FILE *fp = fopen("input1.txt", "r");
size_t len = 255;
// need malloc memory for line, if not, segmentation fault error will occurred.
char *line = malloc(sizeof(char) * len);
// check if file exist (and you can open it) or not
if (fp == NULL) {
printf("can open file input1.txt!");
return;
}
while(fgets(line, len, fp) != NULL) {
printf("%s\n", line);
}
free(line);
}
Hope this help. Happy coding!
You should use the ANSI functions for reading a line, eg. fgets. After calling you need free() in calling context, eg:
...
const char *entirecontent=readLine(myFile);
puts(entirecontent);
free(entirecontent);
...
const char *readLine(FILE *file)
{
char *lineBuffer=calloc(1,1), line[128];
if ( !file || !lineBuffer )
{
fprintf(stderr,"an ErrorNo 1: ...");
exit(1);
}
for(; fgets(line,sizeof line,file) ; strcat(lineBuffer,line) )
{
if( strchr(line,'\n') ) *strchr(line,'\n')=0;
lineBuffer=realloc(lineBuffer,strlen(lineBuffer)+strlen(line)+1);
if( !lineBuffer )
{
fprintf(stderr,"an ErrorNo 2: ...");
exit(2);
}
}
return lineBuffer;
}
My implement from scratch:
FILE *pFile = fopen(your_file_path, "r");
int nbytes = 1024;
char *line = (char *) malloc(nbytes);
char *buf = (char *) malloc(nbytes);
size_t bytes_read;
int linesize = 0;
while (fgets(buf, nbytes, pFile) != NULL) {
bytes_read = strlen(buf);
// if line length larger than size of line buffer
if (linesize + bytes_read > nbytes) {
char *tmp = line;
nbytes += nbytes / 2;
line = (char *) malloc(nbytes);
memcpy(line, tmp, linesize);
free(tmp);
}
memcpy(line + linesize, buf, bytes_read);
linesize += bytes_read;
if (feof(pFile) || buf[bytes_read-1] == '\n') {
handle_line(line);
linesize = 0;
memset(line, '\0', nbytes);
}
}
free(buf);
free(line);
Provide a portable and generic getdelim function, test passed via msvc, clang, gcc.
/*
* An implementation conform IEEE Std 1003.1-2017:
* https://pubs.opengroup.org/onlinepubs/9699919799/functions/getdelim.html
*
* <nio.h>:
* https://github.com/junjiemars/c/blob/c425bd0e49df35a2649327664d3f6cd610791996/src/posix/nio.h
* <nio.c>:
* https://github.com/junjiemars/c/blob/c425bd0e49df35a2649327664d3f6cd610791996/src/posix/nio.c
*
*/
#include <errno.h>
#include <stdlib.h>
#include <stdio.h>
#include <limits.h>
/*
* LINE_MAX dependents on OS' implementations so check it first.
* https://github.com/junjiemars/c/blob/c425bd0e49df35a2649327664d3f6cd610791996/src/posix/nlim_auto_check
*/
#define NM_LINE_MAX 4096 /* Linux */
#if (MSVC)
typedef SSIZE_T ssize_t;
# if !defined(SSIZE_MAX)
# define SSIZE_MAX ((ssize_t)((size_t)((ssize_t)-1) >> 1))
# endif
#endif
ssize_t getdelim(char **restrict lineptr, size_t *restrict n, int delimiter,
FILE *restrict stream);
#if defined(getline)
# undef getline
#endif
#define getline(lp, n, f) getdelim((lp), (n), 0x0a, (f))
ssize_t
getdelim(char **restrict lineptr, size_t *restrict n, int delimiter,
FILE *restrict stream)
{
int c;
char *p, *p1;
ssize_t len;
if (NULL == lineptr || NULL == n || NULL == stream
|| (UCHAR_MAX < delimiter || delimiter < 0))
{
errno = EINVAL;
return EOF;
}
if (feof(stream) || ferror(stream))
{
return EOF;
}
if (0 == *lineptr)
{
if (0 == *n)
{
*n = NM_LINE_MAX;
}
*lineptr = malloc(*n);
if (0 == *lineptr)
{
return EOF;
}
}
p = *lineptr;
len = 0;
while (EOF != (c = fgetc(stream)))
{
if (SSIZE_MAX == (ssize_t) len)
{
errno = EOVERFLOW;
return EOF;
}
if ((size_t) len == (*n - 1))
{
*n <<= 1;
p1 = realloc(*lineptr, *n);
if (0 == p1)
{
return EOF;
}
*lineptr = p1;
p = p1 + len;
}
*p++ = (char) c;
len++;
if (c == delimiter)
{
break;
}
}
if (ferror(stream))
{
return EOF;
}
*p = 0;
return len;
}
int
main(void)
{
FILE *fp;
char *line = NULL;
size_t len = 0;
ssize_t read;
fp = fopen("/some-file", "r");
if (fp == NULL)
exit(1);
while ((read = getline(&line, &len, fp)) != -1) {
printf("Retrieved line of length %zu :\n", read);
printf("%s", line);
}
if (ferror(fp)) {
/* handle error */
}
free(line);
fclose(fp);
return 0;
}
You make the mistake of returning a pointer to an automatic variable.
The variable line is allocated in the stack and only lives as long as the function lives.
You are not allowed to return a pointer to it, because as soon as it returns the memory will be given elsewhere.
const char* func x(){
char line[100];
return (const char*) line; //illegal
}
To avoid this, you either return a pointer to memory which resides on the heap eg. lineBuffer
and it should be the user's responsibility to call free() when he is done with it.
Alternatively you can ask the user to pass you as an argument a memory address on which to write the line contents at.
I want a code from ground 0 so i did this to read the content of dictionary's word line by line.
char temp_str[20]; // you can change the buffer size according to your requirements And A single line's length in a File.
Note I've initialized the buffer With Null character each time I read line.This function can be Automated But Since I need A proof of Concept and want to design a programme Byte By Byte
#include<stdio.h>
int main()
{
int i;
char temp_ch;
FILE *fp=fopen("data.txt","r");
while(temp_ch!=EOF)
{
i=0;
char temp_str[20]={'\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0'};
while(temp_ch!='\n')
{
temp_ch=fgetc(fp);
temp_str[i]=temp_ch;
i++;
}
if(temp_ch=='\n')
{
temp_ch=fgetc(fp);
temp_str[i]=temp_ch;
}
printf("%s",temp_str);
}
return 0;
}
I'm somehow having troubles creating a dynamic array of strings in C. I'm not getting the expected results and I want to know why ?
readLine() function will read each line seperately and will do some changes if necessary :
char *readLine(FILE *f, size_t *len)
{
char *line = NULL;
ssize_t nread;
if (f == NULL)
{
return NULL;
}
if ((nread = getline(&line, len, f)) != -1)
{
if (line[nread - 1] == '\n')
{
line[strlen(line)-1] = '\0';
*len = strlen(line);
}
return line;
}
else
{
return NULL;
}
}
readFile() function will return an array of strings after reading all of the lines using readLine and then storing them into an array of strings :
char **readFile(const char *filename, size_t *fileLen)
{
char *result;
int idx = 0;
char **array = calloc(1, sizeof(char*) );
if (filename == NULL || fileLen == NULL)
{
return NULL;
}
FILE *f = fopen(filename, "r");
if (f == NULL)
{
return NULL;
}
while (1)
{
result = readLine(f, fileLen);
if (result == NULL)
break;
else
{
*(array + idx) = malloc(LENGTH * sizeof(char *));
strncpy(array[idx], result, strlen(result) + 1);
idx++;
array = realloc(array, (idx + 1) * sizeof(char *));
}
}
return array;
}
In main I created a temporary file to test my functions but it didn't work properly :
int main()
{
char filename[] = "/tmp/prefXXXXXX";
int fd;
size_t len = 0;
FILE *f;
if (-1 == (fd = mkstemp(filename)))
perror("internal error: mkstemp");
if (NULL == (f = fdopen(fd, "w")))
perror("internal error: fdopen");
for (int i = 0; i < 10000; i++)
fprintf(f, "%d\n", i);
fclose(f);
char **number = readFile(filename, &len);
for (int i = 0; i < sizeof(number) / sizeof(number[0]); i++)
printf("number[%i] = %s\n", i, number[i]);
return 0;
}
When I execute the program, I get the following output:
number[0] = 0
What am I doing wrong here ?
There are lots of issues in that code, it's difficult to find where to start...
Let's look at each function.
char *readLine(FILE *f, size_t *len)
{
char *line = NULL;
ssize_t nread;
if (f == NULL)
{
return NULL;
}
if ((nread = getline(&line, len, f)) != -1)
{
if (line[nread - 1] == '\n')
{
line[strlen(line)-1] = '\0';
*len = strlen(line);
}
return line;
}
else
{
return NULL;
}
}
There is not much wrong here. But manpage for geline tells us:
If *lineptr is set to NULL before the call, then getline() will
allocate a buffer for storing the line. This buffer should be
freed by the user program even if getline() failed.
You do not free the buffer if nread==-1 but only do return NULL; possibly causing a memory leak.
You should also check whether len==NUL as you already do it with f.
Then look at the next function:
char **readFile(const char *filename, size_t *fileLen)
{
char *result;
int idx = 0;
char **array = calloc(1, sizeof(char*) );
if (filename == NULL || fileLen == NULL)
{
return NULL;
}
FILE *f = fopen(filename, "r");
if (f == NULL)
{
return NULL;
}
while (1)
{
result = readLine(f, fileLen);
if (result == NULL)
break;
else
{
*(array + idx) = malloc(LENGTH * sizeof(char *));
strncpy(array[idx], result, strlen(result) + 1);
idx++;
array = realloc(array, (idx + 1) * sizeof(char *));
}
}
return array;
}
In this function you fail to free(array) in case you hit a return NULL; exit.
readLine puts strlen(result) into filelen. Why don't you use it to allocate memory? Instead you take some unknown fixed length LENGTH that may or may not be sufficient to hold the string. Instead you should use fileLen+1 or strlen(result)+1 as you do it with strncpy.
You are also using size of wrong type. You allocate a pointer to char, not char*. As size of char is defined to be 1 you can just drop the size part here.
Then, the length parameter for strncpy should hold the length of the destination, not the source. Otherwise it is completely useless to use strncpy at all.
As you already (should) use the string length to allocate the memory, just use strncpy.
Then, just passing fileLen to the next function does not make sense. In readLine it means length of a line while in readFile that would not make any sense. Instead it should mean number of lines. And as we just came to the topic... You should pass some value to the caller.
Finally, you should not assign the return value of realloc directly to the varirable you passed into it. In case of an error, NULL is returned and you cannot access or free the old pointer any longer.
This block should look like this:
{
array[idx] = malloc(fileLen+1);
strcpy(array[idx], result);
idx++;
void *temp = realloc(array, (idx + 1) * sizeof(char *));
if (temp != NULL)
array = temp;
// TODO: else <error handling>
}
}
*fileLen = idx;
return array;
}
This still has the flaw that you have allocated memory for one more pointer that you do not use. You can change this as further optimization.
Lastly the main function:
int main()
{
char filename[] = "/tmp/prefXXXXXX";
int fd;
size_t len = 0;
FILE *f;
if (-1 == (fd = mkstemp(filename)))
perror("internal error: mkstemp");
if (NULL == (f = fdopen(fd, "w")))
perror("internal error: fdopen");
for (int i = 0; i < 10000; i++)
fprintf(f, "%d\n", i);
fclose(f);
char **number = readFile(filename, &len);
for (int i = 0; i < sizeof(number) / sizeof(number[0]); i++)
printf("number[%i] = %s\n", i, number[i]);
return 0;
}
char **number = readFile(filename, &len); You get an array holding all the lines of a file. number is a very poor name for this.
You return NULL from readFile in case of an error. You should check for that after calling.
Then you forgot that arrays are not pointers and pointers are not arrays. They behave similar in many places but are very different at the same time.
i < sizeof(number) / sizeof(number[0])
Here number is a pointer and its size of the size of a pointer. Also number[0] is a pointer again. Different type, but same size.
What you want is the number of lines which you get from readFile. Use that variable.
This part should look like this:
char **all_lines = readFile(filename, &len);
if (all_lines != NULL)
{
for (int i = 0; i < len; i++)
printf("all_lines[%i] = %s\n", i, all_lines[i]);
And you should not forget that you have allocated a lot of memory which you should also free.
(This might not strictly be necessary when you terminate your program, but you should keep in mind to clean up behind you)
if (all_lines != NULL)
{
for (int i = 0; i < len; i++)
printf("all_lines[%i] = %s\n", i, all_lines[i]);
for (int i = 0; i < len; i++)
free(all_lines[i];
free(all_lines);
}
So I'm trying to create a function that takes in a text file, which contains a bunch of words separated by the newline character, and reads the text file into a char** array.
When I run this code in netbeans on windows, it works fine but if I run it in Linux, I get a segmentation fault error.
// globals
FILE *words_file;
char **dic;
int num_words = 0;
void read_to_array() {
words_file = fopen("words.txt", "r");
char *line = NULL;
int i = 0;
size_t len = 0;
dic = (char **)malloc(99999 * sizeof(char *));
// read dic to array
while (getline(&line, &len, words_file) != -1) {
dic[i] = (char*)malloc(len);
strcpy(dic[i], line);
// get rid of \n after word
if (dic[i][strlen(dic[i]) - 1] == '\n') {
dic[i][strlen(dic[i]) - 1] = '\0';
}
++i;
num_words++;
}
//printf("%s", dic[i][strlen(dic[i]) - 1]); //testing
fclose(words_file);
dic[i] = NULL;
}
What am I missing here?
There are some problems in your program that may cause the undefined behavior that you observe:
You do not test if the file was open successfully, causing undefined behavior if the file is not where you expect it or has a different name.
You do not limit the number of lines read into the array, causing undefined behavior if the file contains more than 99998 lines, which may be be the case in linux as /usr/share/dict/words has 139716 lines on my system, for example.
Your memory allocation scheme is suboptimal but correct: you should compute the length of the word and strip the newline before allocating the copy. As coded, you allocate too much memory. Yet you should free line before returning from read_to_array and you should avoid using global variables.
Here is a modified version:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
char **read_to_array(const char *filename, int *countp) {
FILE *words_file;
char *line = NULL;
size_t line_size = 0;
char **dic = NULL;
int dic_size = 0;
int i = 0;
words_file = fopen(filename, "r");
if (words_file == NULL) {
fprintf(stderr, "cannot open dictionary file %s\n", filename);
return NULL;
}
dic_size = 99999;
dic = malloc(dic_size * sizeof(char *));
if (dic == NULL) {
fprintf(stderr, "cannot allocate dictionary array\n");
fclose(words_file);
return NULL;
}
// read dic to array
while (getline(&line, &line_size, words_file) != -1) {
size_t len = strlen(line);
/* strip the newline if any */
if (len > 0 && line[len - 1] == '\n') {
line[--len] = '\0';
}
if (i >= dic_size - 1) {
/* too many lines: should reallocate the dictionary */
fprintf(stderr, "too many lines\n");
break;
}
dic[i] = malloc(len + 1);
if (dic[i] == NULL) {
/* out of memory: report the error */
fprintf(stderr, "cannot allocate memory for line %d\n", i);
break;
}
strcpy(dic[i], line);
i++;
}
dic[i] = NULL;
*countp = i;
fclose(words_file);
free(line);
return dic;
}
int main(int argc, char **argv) {
const char *filename = (argc > 1) ? argv[1] : "words.txt";
int num_words;
char **dic = read_to_array(filename, &num_words);
if (dic != NULL) {
printf("dictionary loaded: %d lines\n", num_words);
while (num_words > 0)
free(dic[--num_words]);
free(dic);
}
return 0;
}
Output:
chqrlie> readdic /usr/share/dict/words
too many lines
dictionary loaded: 99998 lines
I am using Visual Studio 2010 and in the following code snippet there occurs an exception at the if statement after fseek.
int load_filenew(char *filename, char **buffer)
{
int size = 0;
FILE *fp = 0;
fp = fopen(filename, "rb");
if (!fp)
{
printf(" fopen failed.\n");
return 1;
}
fseek(fp, 0, SEEK_END);
size = ftell(fp);
fseek(fp, 0, SEEK_SET);
if (size)
{
if (*buffer)
{
free(*buffer);
}
*buffer = 0;
*buffer = (char *)malloc(size + 1);
if (!*buffer)
{
printf(" malloc failed.\n");
fclose(fp);
return 3;
}
memset(*buffer, 0, size + 1);
fread(*buffer, size, 1, fp);
(*buffer)[size] = '\0';
}
else
{
fclose(fp);
return 2;
}
fclose(fp);
return 0;
}
This function is called several times in the application but at some times unhandled exception is thrown at following line while loading a file
//exception code
if (size)
{
if (*buffer)
Please help — what could be the possible cause and how to resolve it?
It seems like buffer is probably set to NULL or some other invalid pointer and probably segfaults when you dereference it. It could also be your first call to free if the pointer is invalid. Ideally you need to show us the code that calls this function.
Also keep in mind it's bad form to call a matching malloc and free in different functions. Unless that function has only one purpose, to allocate a new structure or to free an existing one (In other words allocation of any resource should be done in the same function as deallocation of that same resource. The only exception is a function that composes more complex allocations and deallocations).
int load_filenew(char *filename, char **buffer)
{
int size = 0;
FILE *fp = 0;
if(buffer == NULL)
{
return 1;
}
fp = fopen(filename, "rb");
if (!fp)
{
printf(" fopen failed.\n");
return 2;
}
fseek(fp, 0, SEEK_END);
size = ftell(fp);
fseek(fp, 0, SEEK_SET);
if (size)
{
*buffer = (char *)malloc(size + 1);
if (!*buffer)
{
printf(" malloc failed.\n");
fclose(fp);
return 3;
}
memset(*buffer, 0, size + 1);
fread(*buffer, size, 1, fp);
(*buffer)[size] = '\0';
}
else
{
fclose(fp);
return 3;
}
fclose(fp);
return 0;
}
not solving your problem directly but:
if (*buffer)
{
free(*buffer);
}
*buffer = 0;
*buffer = (char *)malloc(size + 1);
have you considered using realloc() instead?
p = realloc(*buffer, size + 1);
if ( p != NULL )
{
*buffer = p;
}
I wrote this function to read a line from a file:
const char *readLine(FILE *file) {
if (file == NULL) {
printf("Error: file pointer is null.");
exit(1);
}
int maximumLineLength = 128;
char *lineBuffer = (char *)malloc(sizeof(char) * maximumLineLength);
if (lineBuffer == NULL) {
printf("Error allocating memory for line buffer.");
exit(1);
}
char ch = getc(file);
int count = 0;
while ((ch != '\n') && (ch != EOF)) {
if (count == maximumLineLength) {
maximumLineLength += 128;
lineBuffer = realloc(lineBuffer, maximumLineLength);
if (lineBuffer == NULL) {
printf("Error reallocating space for line buffer.");
exit(1);
}
}
lineBuffer[count] = ch;
count++;
ch = getc(file);
}
lineBuffer[count] = '\0';
char line[count + 1];
strncpy(line, lineBuffer, (count + 1));
free(lineBuffer);
const char *constLine = line;
return constLine;
}
The function reads the file correctly, and using printf I see that the constLine string did get read correctly as well.
However, if I use the function e.g. like this:
while (!feof(myFile)) {
const char *line = readLine(myFile);
printf("%s\n", line);
}
printf outputs gibberish. Why?
If your task is not to invent the line-by-line reading function, but just to read the file line-by-line, you may use a typical code snippet involving the getline() function (see the manual page here):
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
int main(void)
{
FILE * fp;
char * line = NULL;
size_t len = 0;
ssize_t read;
fp = fopen("/etc/motd", "r");
if (fp == NULL)
exit(EXIT_FAILURE);
while ((read = getline(&line, &len, fp)) != -1) {
printf("Retrieved line of length %zu:\n", read);
printf("%s", line);
}
fclose(fp);
if (line)
free(line);
exit(EXIT_SUCCESS);
}
FILE* filePointer;
int bufferLength = 255;
char buffer[bufferLength]; /* not ISO 90 compatible */
filePointer = fopen("file.txt", "r");
while(fgets(buffer, bufferLength, filePointer)) {
printf("%s\n", buffer);
}
fclose(filePointer);
In your readLine function, you return a pointer to the line array (Strictly speaking, a pointer to its first character, but the difference is irrelevant here). Since it's an automatic variable (i.e., it's “on the stack”), the memory is reclaimed when the function returns. You see gibberish because printf has put its own stuff on the stack.
You need to return a dynamically allocated buffer from the function. You already have one, it's lineBuffer; all you have to do is truncate it to the desired length.
lineBuffer[count] = '\0';
realloc(lineBuffer, count + 1);
return lineBuffer;
}
ADDED (response to follow-up question in comment): readLine returns a pointer to the characters that make up the line. This pointer is what you need to work with the contents of the line. It's also what you must pass to free when you've finished using the memory taken by these characters. Here's how you might use the readLine function:
char *line = readLine(file);
printf("LOG: read a line: %s\n", line);
if (strchr(line, 'a')) { puts("The line contains an a"); }
/* etc. */
free(line);
/* After this point, the memory allocated for the line has been reclaimed.
You can't use the value of `line` again (though you can assign a new value
to the `line` variable if you want). */
//open and get the file handle
FILE* fh;
fopen_s(&fh, filename, "r");
//check if file exists
if (fh == NULL){
printf("file does not exists %s", filename);
return 0;
}
//read line by line
const size_t line_size = 300;
char* line = malloc(line_size);
while (fgets(line, line_size, fh) != NULL) {
printf(line);
}
free(line); // dont forget to free heap memory
A complete, fgets() solution:
#include <stdio.h>
#include <string.h>
#define MAX_LEN 256
int main(void)
{
FILE* fp;
fp = fopen("file.txt", "r");
if (fp == NULL) {
perror("Failed: ");
return 1;
}
char buffer[MAX_LEN];
while (fgets(buffer, MAX_LEN, fp))
{
// Remove trailing newline
buffer[strcspn(buffer, "\n")] = 0;
printf("%s\n", buffer);
}
fclose(fp);
return 0;
}
Output:
First line of file
Second line of file
Third (and also last) line of file
Remember, if you want to read from Standard Input (rather than a file as in this case), then all you have to do is pass stdin as the third parameter of fgets() method, like this:
while(fgets(buffer, MAX_LEN, stdin))
Appendix
Removing trailing newline character from fgets() input
how to detect a file is opened or not in c
readLine() returns pointer to local variable, which causes undefined behaviour.
To get around you can:
Create variable in caller function and pass its address to readLine()
Allocate memory for line using malloc() - in this case line will be persistent
Use global variable, although it is generally a bad practice
Use fgets() to read a line from a file handle.
Some things wrong with the example:
you forgot to add \n to your printfs. Also error messages should go to stderr i.e. fprintf(stderr, ....
(not a biggy but) consider using fgetc() rather than getc(). getc() is a macro, fgetc() is a proper function
getc() returns an int so ch should be declared as an int. This is important since the comparison with EOF will be handled correctly. Some 8 bit character sets use 0xFF as a valid character (ISO-LATIN-1 would be an example) and EOF which is -1, will be 0xFF if assigned to a char.
There is a potential buffer overflow at the line
lineBuffer[count] = '\0';
If the line is exactly 128 characters long, count is 128 at the point that gets executed.
As others have pointed out, line is a locally declared array. You can't return a pointer to it.
strncpy(count + 1) will copy at most count + 1 characters but will terminate if it hits '\0' Because you set lineBuffer[count] to '\0' you know it will never get to count + 1. However, if it did, it would not put a terminating '\0' on, so you need to do it. You often see something like the following:
char buffer [BUFFER_SIZE];
strncpy(buffer, sourceString, BUFFER_SIZE - 1);
buffer[BUFFER_SIZE - 1] = '\0';
if you malloc() a line to return (in place of your local char array), your return type should be char* - drop the const.
Here is my several hours... Reading whole file line by line.
char * readline(FILE *fp, char *buffer)
{
int ch;
int i = 0;
size_t buff_len = 0;
buffer = malloc(buff_len + 1);
if (!buffer) return NULL; // Out of memory
while ((ch = fgetc(fp)) != '\n' && ch != EOF)
{
buff_len++;
void *tmp = realloc(buffer, buff_len + 1);
if (tmp == NULL)
{
free(buffer);
return NULL; // Out of memory
}
buffer = tmp;
buffer[i] = (char) ch;
i++;
}
buffer[i] = '\0';
// Detect end
if (ch == EOF && (i == 0 || ferror(fp)))
{
free(buffer);
return NULL;
}
return buffer;
}
void lineByline(FILE * file){
char *s;
while ((s = readline(file, 0)) != NULL)
{
puts(s);
free(s);
printf("\n");
}
}
int main()
{
char *fileName = "input-1.txt";
FILE* file = fopen(fileName, "r");
lineByline(file);
return 0;
}
const char *readLine(FILE *file, char* line) {
if (file == NULL) {
printf("Error: file pointer is null.");
exit(1);
}
int maximumLineLength = 128;
char *lineBuffer = (char *)malloc(sizeof(char) * maximumLineLength);
if (lineBuffer == NULL) {
printf("Error allocating memory for line buffer.");
exit(1);
}
char ch = getc(file);
int count = 0;
while ((ch != '\n') && (ch != EOF)) {
if (count == maximumLineLength) {
maximumLineLength += 128;
lineBuffer = realloc(lineBuffer, maximumLineLength);
if (lineBuffer == NULL) {
printf("Error reallocating space for line buffer.");
exit(1);
}
}
lineBuffer[count] = ch;
count++;
ch = getc(file);
}
lineBuffer[count] = '\0';
char line[count + 1];
strncpy(line, lineBuffer, (count + 1));
free(lineBuffer);
return line;
}
char linebuffer[256];
while (!feof(myFile)) {
const char *line = readLine(myFile, linebuffer);
printf("%s\n", line);
}
note that the 'line' variable is declared in calling function and then passed, so your readLine function fills predefined buffer and just returns it. This is the way most of C libraries work.
There are other ways, which I'm aware of:
defining the char line[] as static
(static char line[MAX_LINE_LENGTH]
-> it will hold it's value AFTER returning from the function). -> bad,
the function is not reentrant, and
race condition can occur -> if you
call it twice from two threads, it
will overwrite it's results
malloc()ing the char line[], and
freeing it in calling functions ->
too many expensive mallocs, and,
delegating the responsibility to free the buffer to another function (the most elegant solution is to call malloc and free on any buffers in same function)
btw, 'explicit' casting from char* to const char* is redundant.
btw2, there is no need to malloc() the lineBuffer, just define it char lineBuffer[128], so you don't need to free it
btw3 do not use 'dynamic sized stack arrays' (defining the array as char arrayName[some_nonconstant_variable]), if you don't exactly know what are you doing, it works only in C99.
void readLine(FILE* file, char* line, int limit)
{
int i;
int read;
read = fread(line, sizeof(char), limit, file);
line[read] = '\0';
for(i = 0; i <= read;i++)
{
if('\0' == line[i] || '\n' == line[i] || '\r' == line[i])
{
line[i] = '\0';
break;
}
}
if(i != read)
{
fseek(file, i - read + 1, SEEK_CUR);
}
}
what about this one?
Implement method to read, and get content from a file (input1.txt)
#include <stdio.h>
#include <stdlib.h>
void testGetFile() {
// open file
FILE *fp = fopen("input1.txt", "r");
size_t len = 255;
// need malloc memory for line, if not, segmentation fault error will occurred.
char *line = malloc(sizeof(char) * len);
// check if file exist (and you can open it) or not
if (fp == NULL) {
printf("can open file input1.txt!");
return;
}
while(fgets(line, len, fp) != NULL) {
printf("%s\n", line);
}
free(line);
}
Hope this help. Happy coding!
You should use the ANSI functions for reading a line, eg. fgets. After calling you need free() in calling context, eg:
...
const char *entirecontent=readLine(myFile);
puts(entirecontent);
free(entirecontent);
...
const char *readLine(FILE *file)
{
char *lineBuffer=calloc(1,1), line[128];
if ( !file || !lineBuffer )
{
fprintf(stderr,"an ErrorNo 1: ...");
exit(1);
}
for(; fgets(line,sizeof line,file) ; strcat(lineBuffer,line) )
{
if( strchr(line,'\n') ) *strchr(line,'\n')=0;
lineBuffer=realloc(lineBuffer,strlen(lineBuffer)+strlen(line)+1);
if( !lineBuffer )
{
fprintf(stderr,"an ErrorNo 2: ...");
exit(2);
}
}
return lineBuffer;
}
My implement from scratch:
FILE *pFile = fopen(your_file_path, "r");
int nbytes = 1024;
char *line = (char *) malloc(nbytes);
char *buf = (char *) malloc(nbytes);
size_t bytes_read;
int linesize = 0;
while (fgets(buf, nbytes, pFile) != NULL) {
bytes_read = strlen(buf);
// if line length larger than size of line buffer
if (linesize + bytes_read > nbytes) {
char *tmp = line;
nbytes += nbytes / 2;
line = (char *) malloc(nbytes);
memcpy(line, tmp, linesize);
free(tmp);
}
memcpy(line + linesize, buf, bytes_read);
linesize += bytes_read;
if (feof(pFile) || buf[bytes_read-1] == '\n') {
handle_line(line);
linesize = 0;
memset(line, '\0', nbytes);
}
}
free(buf);
free(line);
Provide a portable and generic getdelim function, test passed via msvc, clang, gcc.
/*
* An implementation conform IEEE Std 1003.1-2017:
* https://pubs.opengroup.org/onlinepubs/9699919799/functions/getdelim.html
*
* <nio.h>:
* https://github.com/junjiemars/c/blob/c425bd0e49df35a2649327664d3f6cd610791996/src/posix/nio.h
* <nio.c>:
* https://github.com/junjiemars/c/blob/c425bd0e49df35a2649327664d3f6cd610791996/src/posix/nio.c
*
*/
#include <errno.h>
#include <stdlib.h>
#include <stdio.h>
#include <limits.h>
/*
* LINE_MAX dependents on OS' implementations so check it first.
* https://github.com/junjiemars/c/blob/c425bd0e49df35a2649327664d3f6cd610791996/src/posix/nlim_auto_check
*/
#define NM_LINE_MAX 4096 /* Linux */
#if (MSVC)
typedef SSIZE_T ssize_t;
# if !defined(SSIZE_MAX)
# define SSIZE_MAX ((ssize_t)((size_t)((ssize_t)-1) >> 1))
# endif
#endif
ssize_t getdelim(char **restrict lineptr, size_t *restrict n, int delimiter,
FILE *restrict stream);
#if defined(getline)
# undef getline
#endif
#define getline(lp, n, f) getdelim((lp), (n), 0x0a, (f))
ssize_t
getdelim(char **restrict lineptr, size_t *restrict n, int delimiter,
FILE *restrict stream)
{
int c;
char *p, *p1;
ssize_t len;
if (NULL == lineptr || NULL == n || NULL == stream
|| (UCHAR_MAX < delimiter || delimiter < 0))
{
errno = EINVAL;
return EOF;
}
if (feof(stream) || ferror(stream))
{
return EOF;
}
if (0 == *lineptr)
{
if (0 == *n)
{
*n = NM_LINE_MAX;
}
*lineptr = malloc(*n);
if (0 == *lineptr)
{
return EOF;
}
}
p = *lineptr;
len = 0;
while (EOF != (c = fgetc(stream)))
{
if (SSIZE_MAX == (ssize_t) len)
{
errno = EOVERFLOW;
return EOF;
}
if ((size_t) len == (*n - 1))
{
*n <<= 1;
p1 = realloc(*lineptr, *n);
if (0 == p1)
{
return EOF;
}
*lineptr = p1;
p = p1 + len;
}
*p++ = (char) c;
len++;
if (c == delimiter)
{
break;
}
}
if (ferror(stream))
{
return EOF;
}
*p = 0;
return len;
}
int
main(void)
{
FILE *fp;
char *line = NULL;
size_t len = 0;
ssize_t read;
fp = fopen("/some-file", "r");
if (fp == NULL)
exit(1);
while ((read = getline(&line, &len, fp)) != -1) {
printf("Retrieved line of length %zu :\n", read);
printf("%s", line);
}
if (ferror(fp)) {
/* handle error */
}
free(line);
fclose(fp);
return 0;
}
You make the mistake of returning a pointer to an automatic variable.
The variable line is allocated in the stack and only lives as long as the function lives.
You are not allowed to return a pointer to it, because as soon as it returns the memory will be given elsewhere.
const char* func x(){
char line[100];
return (const char*) line; //illegal
}
To avoid this, you either return a pointer to memory which resides on the heap eg. lineBuffer
and it should be the user's responsibility to call free() when he is done with it.
Alternatively you can ask the user to pass you as an argument a memory address on which to write the line contents at.
I want a code from ground 0 so i did this to read the content of dictionary's word line by line.
char temp_str[20]; // you can change the buffer size according to your requirements And A single line's length in a File.
Note I've initialized the buffer With Null character each time I read line.This function can be Automated But Since I need A proof of Concept and want to design a programme Byte By Byte
#include<stdio.h>
int main()
{
int i;
char temp_ch;
FILE *fp=fopen("data.txt","r");
while(temp_ch!=EOF)
{
i=0;
char temp_str[20]={'\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0','\0'};
while(temp_ch!='\n')
{
temp_ch=fgetc(fp);
temp_str[i]=temp_ch;
i++;
}
if(temp_ch=='\n')
{
temp_ch=fgetc(fp);
temp_str[i]=temp_ch;
}
printf("%s",temp_str);
}
return 0;
}