This is a very difficult problem about how to maneuver a spaceship that can both translate and rotate in 3D, for a space game.
The spaceship has n jets placing in various positions and directions.
Transformation of i-th jet relative to the CM of spaceship is constant = Ti.
Transformation is a tuple of position and orientation (quaternion or matrix 3x3 or, less preferable, Euler angles).
A transformation can also be denoted by a single matrix 4x4.
In other words, all jet are glued to the ship and cannot rotate.
A jet can exert force to the spaceship only in direction of its axis (green).
As a result of glue, the axis rotated along with the spaceship.
All jets can exert force (vector,Fi) at a certain magnitude (scalar,fi) :
i-th jet can exert force (Fi= axis x fi) only within range min_i<= fi <=max_i.
Both min_i and max_i are constant with known value.
To be clear, unit of min_i,fi,max_i is Newton.
Ex. If the range doesn't cover 0, it means that the jet can't be turned off.
The spaceship's mass = m and inertia tensor = I.
The spaceship's current transformation = Tran0, velocity = V0, angularVelocity = W0.
The spaceship physic body follows well-known physic rules :-
Torque=r x F
F=ma
angularAcceleration = I^-1 x Torque
linearAcceleration = m^-1 x F
I is different for each direction, but for the sake of simplicity, it has the same value for every direction (sphere-like). Thus, I can be thought as a scalar instead of matrix 3x3.
Question
How to control all jets (all fi) to land the ship with position=0 and angle=0?
Math-like specification: Find function of fi(time) that take minimum time to reach position=(0,0,0), orient=identity with final angularVelocity and velocity = zero.
More specifically, what are names of technique or related algorithms to solve this problem?
My research (1 dimension)
If the universe is 1D (thus, no rotation), the problem will be easy to solve.
( Thank Gavin Lock, https://stackoverflow.com/a/40359322/3577745 )
First, find the value MIN_BURN=sum{min_i}/m and MAX_BURN=sum{max_i}/m.
Second, think in opposite way, assume that x=0 (position) and v=0 at t=0,
then create two parabolas with x''=MIN_BURN and x''=MAX_BURN.
(The 2nd derivative is assumed to be constant for a period of time, so it is parabola.)
The only remaining work is to join two parabolas together.
The red dash line is where them join.
In the period of time that x''=MAX_BURN, all fi=max_i.
In the period of time that x''=MIN_BURN, all fi=min_i.
It works really well for 1D, but in 3D, the problem is far more harder.
Note:
Just a rough guide pointing me to a correct direction is really appreciated.
I don't need a perfect AI, e.g. it can take a little more time than optimum.
I think about it for more than 1 week, still find no clue.
Other attempts / opinions
I don't think machine learning like neural network is appropriate for this case.
Boundary-constrained-least-square-optimisation may be useful but I don't know how to fit my two hyper-parabola to that form of problem.
This may be solved by using many iterations, but how?
I have searched NASA's website, but not find anything useful.
The feature may exist in "Space Engineer" game.
Commented by Logman: Knowledge in mechanical engineering may help.
Commented by AndyG: It is a motion planning problem with nonholonomic constraints. It could be solved by Rapidly exploring random tree (RRTs), theory around Lyapunov equation, and Linear quadratic regulator.
Commented by John Coleman: This seems more like optimal control than AI.
Edit: "Near-0 assumption" (optional)
In most case, AI (to be designed) run continuously (i.e. called every time-step).
Thus, with the AI's tuning, Tran0 is usually near-identity, V0 and W0 are usually not so different from 0, e.g. |Seta0|<30 degree,|W0|<5 degree per time-step .
I think that AI based on this assumption would work OK in most case. Although not perfect, it can be considered as a correct solution (I started to think that without this assumption, this question might be too hard).
I faintly feel that this assumption may enable some tricks that use some "linear"-approximation.
The 2nd Alternative Question - "Tune 12 Variables" (easier)
The above question might also be viewed as followed :-
I want to tune all six values and six values' (1st-derivative) to be 0, using lowest amount of time-steps.
Here is a table show a possible situation that AI can face:-
The Multiplier table stores inertia^-1 * r and mass^-1 from the original question.
The Multiplier and Range are constant.
Each timestep, the AI will be asked to pick a tuple of values fi that must be in the range [min_i,max_i] for every i+1-th jet.
Ex. From the table, AI can pick (f0=1,f1=0.1,f2=-1).
Then, the caller will use fi to multiply with the Multiplier table to get values''.
Px'' = f0*0.2+f1*0.0+f2*0.7
Py'' = f0*0.3-f1*0.9-f2*0.6
Pz'' = ....................
SetaX''= ....................
SetaY''= ....................
SetaZ''= f0*0.0+f1*0.0+f2*5.0
After that, the caller will update all values' with formula values' += values''.
Px' += Px''
.................
SetaZ' += SetaZ''
Finally, the caller will update all values with formula values += values'.
Px += Px'
.................
SetaZ += SetaZ'
AI will be asked only once for each time-step.
The objective of AI is to return tuples of fi (can be different for different time-step), to make Px,Py,Pz,SetaX,SetaY,SetaZ,Px',Py',Pz',SetaX',SetaY',SetaZ' = 0 (or very near),
by using least amount of time-steps as possible.
I hope providing another view of the problem will make it easier.
It is not the exact same problem, but I feel that a solution that can solve this version can bring me very close to the answer of the original question.
An answer for this alternate question can be very useful.
The 3rd Alternative Question - "Tune 6 Variables" (easiest)
This is a lossy simplified version of the previous alternative.
The only difference is that the world is now 2D, Fi is also 2D (x,y).
Thus I have to tune only Px,Py,SetaZ,Px',Py',SetaZ'=0, by using least amount of time-steps as possible.
An answer to this easiest alternative question can be considered useful.
I'll try to keep this short and sweet.
One approach that is often used to solve these problems in simulation is a Rapidly-Exploring Random Tree. To give at least a little credibility to my post, I'll admit I studied these, and motion planning was my research lab's area of expertise (probabilistic motion planning).
The canonical paper to read on these is Steven LaValle's Rapidly-exploring random trees: A new tool for path planning, and there have been a million papers published since that all improve on it in some way.
First I'll cover the most basic description of an RRT, and then I'll describe how it changes when you have dynamical constraints. I'll leave fiddling with it afterwards up to you:
Terminology
"Spaces"
The state of your spaceship can be described by its 3-dimension position (x, y, z) and its 3-dimensional rotation (alpha, beta, gamma) (I use those greek names because those are the Euler angles).
state space is all possible positions and rotations your spaceship can inhabit. Of course this is infinite.
collision space are all of the "invalid" states. i.e. realistically impossible positions. These are states where your spaceship is in collision with some obstacle (With other bodies this would also include collision with itself, for example planning for a length of chain). Abbreviated as C-Space.
free space is anything that is not collision space.
General Approach (no dynamics constraints)
For a body without dynamical constraints the approach is fairly straightforward:
Sample a state
Find nearest neighbors to that state
Attempt to plan a route between the neighbors and the state
I'll briefly discuss each step
Sampling a state
Sampling a state in the most basic case means choosing at random values for each entry in your state space. If we did this with your space ship, we'd randomly sample for x, y, z, alpha, beta, gamma across all of their possible values (uniform random sampling).
Of course way more of your space is obstacle space than free space typically (because you usually confine your object in question to some "environment" you want to move about inside of). So what is very common to do is to take the bounding cube of your environment and sample positions within it (x, y, z), and now we have a lot higher chance to sample in the free space.
In an RRT, you'll sample randomly most of the time. But with some probability you will actually choose your next sample to be your goal state (play with it, start with 0.05). This is because you need to periodically test to see if a path from start to goal is available.
Finding nearest neighbors to a sampled state
You chose some fixed integer > 0. Let's call that integer k. Your k nearest neighbors are nearby in state space. That means you have some distance metric that can tell you how far away states are from each other. The most basic distance metric is Euclidean distance, which only accounts for physical distance and doesn't care about rotational angles (because in the simplest case you can rotate 360 degrees in a single timestep).
Initially you'll only have your starting position, so it will be the only candidate in the nearest neighbor list.
Planning a route between states
This is called local planning. In a real-world scenario you know where you're going, and along the way you need to dodge other people and moving objects. We won't worry about those things here. In our planning world we assume the universe is static but for us.
What's most common is to assume some linear interpolation between the sampled state and its nearest neighbor. The neighbor (i.e. a node already in the tree) is moved along this linear interpolation bit by bit until it either reaches the sampled configuration, or it travels some maximum distance (recall your distance metric).
What's going on here is that your tree is growing towards the sample. When I say that you step "bit by bit" I mean you define some "delta" (a really small value) and move along the linear interpolation that much each timestep. At each point you check to see if you the new state is in collision with some obstacle. If you hit an obstacle, you keep the last valid configuration as part of the tree (don't forget to store the edge somehow!) So what you'll need for a local planner is:
Collision checking
how to "interpolate" between two states (for your problem you don't need to worry about this because we'll do something different).
A physics simulation for timestepping (Euler integration is quite common, but less stable than something like Runge-Kutta. Fortunately you already have a physics model!
Modification for dynamical constraints
Of course if we assume you can linearly interpolate between states, we'll violate the physics you've defined for your spaceship. So we modify the RRT as follows:
Instead of sampling random states, we sample random controls and apply said controls for a fixed time period (or until collision).
Before, when we sampled random states, what we were really doing was choosing a direction (in state space) to move. Now that we have constraints, we randomly sample our controls, which is effectively the same thing, except we're guaranteed not to violate our constraints.
After you apply your control for a fixed time interval (or until collision), you add a node to the tree, with the control stored on the edge. Your tree will grow very fast to explore the space. This control application replaces linear interpolation between tree states and sampled states.
Sampling the controls
You have n jets that individually have some min and max force they can apply. Sample within that min and max force for each jet.
Which node(s) do I apply my controls to?
Well you can choose at random, or your can bias the selection to choose nodes that are nearest to your goal state (need the distance metric). This biasing will try to grow nodes closer to the goal over time.
Now, with this approach, you're unlikely to exactly reach your goal, so you need to define some definition of "close enough". That is, you will use your distance metric to find nearest neighbors to your goal state, and then test them for "close enough". This "close enough" metric can be different than your distance metric, or not. If you're using Euclidean distance, but it's very important that you goal configuration is also rotated properly, then you may want to modify the "close enough" metric to look at angle differences.
What is "close enough" is entirely up to you. Also something for you to tune, and there are a million papers that try to get you a lot closer in the first place.
Conclusion
This random sampling may sound ridiculous, but your tree will grow to explore your free space very quickly. See some youtube videos on RRT for path planning. We can't guarantee something called "probabilistic completeness" with dynamical constraints, but it's usually "good enough". Sometimes it'll be possible that a solution does not exist, so you'll need to put some logic in there to stop growing the tree after a while (20,000 samples for example)
More Resources:
Start with these, and then start looking into their citations, and then start looking into who is citing them.
Kinodynamic RRT*
RRT-Connect
This is not an answer, but it's too long to place as a comment.
First of all, a real solution will involve both linear programming (for multivariate optimization with constraints that will be used in many of the substeps) as well as techniques used in trajectory optimization and/or control theory. This is a very complex problem and if you can solve it, you could have a job at any company of your choosing. The only thing that could make this problem worse would be friction (drag) effects or external body gravitation effects. A real solution would also ideally use Verlet integration or 4th order Runge Kutta, which offer improvements over the Euler integration you've implemented here.
Secondly, I believe your "2nd Alternative Version" of your question above has omitted the rotational influence on the positional displacement vector you add into the position at each timestep. While the jet axes all remain fixed relative to the frame of reference of the ship, they do not remain fixed relative to the global coordinate system you are using to land the ship (at global coordinate [0, 0, 0]). Therefore the [Px', Py', Pz'] vector (calculated from the ship's frame of reference) must undergo appropriate rotation in all 3 dimensions prior to being applied to the global position coordinates.
Thirdly, there are some implicit assumptions you failed to specify. For example, one dimension should be defined as the "landing depth" dimension and negative coordinate values should be prohibited (unless you accept a fiery crash). I developed a mockup model for this in which I assumed z dimension to be the landing dimension. This problem is very sensitive to initial state and the constraints placed on the jets. All of my attempts using your example initial conditions above failed to land. For example, in my mockup (without the 3d displacement vector rotation noted above), the jet constraints only allow for rotation in one direction on the z-axis. So if aZ becomes negative at any time (which is often the case) the ship is actually forced to complete another full rotation on that axis before it can even try to approach zero degrees again. Also, without the 3d displacement vector rotation, you will find that Px will only go negative using your example initial conditions and constraints, and the ship is forced to either crash or diverge farther and farther onto the negative x-axis as it attempts to maneuver. The only way to solve this is to truly incorporate rotation or allow for sufficient positive and negative jet forces.
However, even when I relaxed your min/max force constraints, I was unable to get my mockup to land successfully, demonstrating how complex planning will probably be required here. Unless it is possible to completely formulate this problem in linear programming space, I believe you will need to incorporate advanced planning or stochastic decision trees that are "smart" enough to continually use rotational methods to reorient the most flexible jets onto the currently most necessary axes.
Lastly, as I noted in the comments section, "On May 14, 2015, the source code for Space Engineers was made freely available on GitHub to the public." If you believe that game already contains this logic, that should be your starting place. However, I suspect you are bound to be disappointed. Most space game landing sequences simply take control of the ship and do not simulate "real" force vectors. Once you take control of a 3-d model, it is very easy to predetermine a 3d spline with rotation that will allow the ship to land softly and with perfect bearing at the predetermined time. Why would any game programmer go through this level of work for a landing sequence? This sort of logic could control ICBM missiles or planetary rover re-entry vehicles and it is simply overkill IMHO for a game (unless the very purpose of the game is to see if you can land a damaged spaceship with arbitrary jets and constraints without crashing).
I can introduce another technique into the mix of (awesome) answers proposed.
It lies more in AI, and provides close-to-optimal solutions. It's called Machine Learning, more specifically Q-Learning. It's surprisingly easy to implement but hard to get right.
The advantage is that the learning can be done offline, so the algorithm can then be super fast when used.
You could do the learning when the ship is built or when something happens to it (thruster destruction, large chunks torn away...).
Optimality
I observed you're looking for near-optimal solutions. Your method with parabolas is good for optimal control. What you did is this:
Observe the state of the system.
For every state (coming in too fast, too slow, heading away, closing in etc.) you devised an action (apply a strategy) that will bring the system into a state closer to the goal.
Repeat
This is pretty much intractable for a human in 3D (too many cases, will drive you nuts) however a machine may learn where to split the parabolas in every dimensions, and devise an optimal strategy by itself.
THe Q-learning works very similarly to us:
Observe the (secretized) state of the system
Select an action based on a strategy
If this action brought the system into a desirable state (closer to the goal), mark the action/initial state as more desirable
Repeat
Discretize your system's state.
For each state, have a map intialized quasi-randomly, which maps every state to an Action (this is the strategy). Also assign a desirability to each state (initially, zero everywhere and 1000000 to the target state (X=0, V=0).
Your state would be your 3 positions, 3 angles, 3translation speed, and three rotation speed.
Your actions can be any combination of thrusters
Training
Train the AI (offline phase):
Generate many diverse situations
Apply the strategy
Evaluate the new state
Let the algo (see links above) reinforce the selected strategies' desirability value.
Live usage in the game
After some time, a global strategy for navigation emerges. You then store it, and during your game loop you simply sample your strategy and apply it to each situation as they come up.
The strategy may still learn during this phase, but probably more slowly (because it happens real-time). (Btw, I dream of a game where the AI would learn from every user's feedback so we could collectively train it ^^)
Try this in a simple 1D problem, it devises a strategy remarkably quickly (a few seconds).
In 2D I believe excellent results could be obtained in an hour.
For 3D... You're looking at overnight computations. There's a few thing to try and accelerate the process:
Try to never 'forget' previous computations, and feed them as an initial 'best guess' strategy. Save it to a file!
You might drop some states (like ship roll maybe?) without losing much navigation optimality but increasing computation speed greatly. Maybe change referentials so the ship is always on the X-axis, this way you'll drop x&y dimensions!
States more frequently encountered will have a reliable and very optimal strategy. Maybe normalize the state to make your ship state always close to a 'standard' state?
Typically rotation speeds intervals may be bounded safely (you don't want a ship tumbling wildely, so the strategy will always be to "un-wind" that speed). Of course rotation angles are additionally bounded.
You can also probably discretize non-linearly the positions because farther away from the objective, precision won't affect the strategy much.
For these kind of problems there are two techniques available: bruteforce search and heuristics. Bruteforce means to recognize the problem as a blackbox with input and output parameters and the aim is to get the right input parameters for winning the game. To program such a bruteforce search, the gamephysics runs in a simulation loop (physics simulation) and via stochastic search (minimax, alpha-beta-prunning) every possibility is tried out. The disadvantage of bruteforce search is the high cpu consumption.
The other techniques utilizes knowledge about the game. Knowledge about motion primitives and about evaluation. This knowledge is programmed with normal computerlanguages like C++ or Java. The disadvantage of this idea is, that it is often difficult to grasp the knowledge.
The best practice for solving spaceship navigation is to combine both ideas into a hybrid system. For programming sourcecode for this concrete problem I estimate that nearly 2000 lines of code are necessary. These kind of problems are normaly done within huge projects with many programmers and takes about 6 months.
Since the implementation of the algorithm is correct(i checked it hundreds of times), I think I have misunderstood some theorical facts.
I suppose that:
given that j refers to the hiddenlayer side and k to the output layer
∂E/∂wjk is calculated by doing:
outputNeuron[k].errInfo=(target[k]-outputNeuron[k].out)*derivate_of_sigmoid(outputNeuron[q].in);
∂E/∂wjk=outputNeuron[k].errInfo*hiddenNeuron[j].out;
For the ∂E/∂wij, where 'i' refers to the inputlayer and 'j' to the hiddenlayer, it's a bit longer.
Each hidden unit (Zj, j = 1, ... ,p) sums its
delta inputs (from units in the output layer),
errorInfo_in[j]=summation from k=1 to m(number of output units) of: outputNeuron[k].errInfo*w[j][k]
Then i calculate the error info of the hidden unit:
hiddenNeuron[j].errInfo=errorInfo_in[j]*derivated_sigmoid(hiddenNeuron[j].in);
Finally the ∂E/∂wij is:
hiddenNeuron[j].errInfo*x[i] (where x[i] is the output of an input unit)
I apply the RPROP as described here http://www.inf.fu-berlin.de/lehre/WS06/Musterererkennung/Paper/rprop.pdf
For all the weight between the input and hidden, and hidden output.
I'm trying to recognize letters made of '#' and '-' , 9(rows)x7(columns).
The MSE just get stuck at 172 after a few epoch.
I know that RPROP is a batch learning, but i'm using online learning because i read that it works anyway.
RPROP does not work well with pure online learning, it might work with mini-batch learning, provided mini-batch is large enough. Absolute value of MSE is poor indicator of anything, especially on custom datasets where gold standard values are unknown.
It is best to test newly implemented NN algorithms on simple things like logic gates (AND, OR, XOR), before moving to something more complex. This way, you will always be confident in your code and methodologies. For character recognition tasks, you may also want to test on well known datasets such as MNIST, where expected results are known and you can compare your results to previous work.
For classification tasks one usually want to measure accuracy of classification as it is much better perfomance indicator than MSE.
The context:
I'm experimenting with using a feed-forward artificial neural network to create AI for a video game, and I've run into the problem that some of my input features are dependent upon the existence or value of other input features.
The most basic, simplified example I can think of is this:
feature 1 is the number of players (range 2...5)
feature 2 to ? is the score of each player (range >=0)
The number of features needed to inform the ANN of the scores is dependent on the number of players.
The question: How can I represent this dynamic knowledge input to an ANN?
Things I've already considered:
Simply not using such features, or consolidating them into static input.
I.E using the sum of the players scores instead. I seriously doubt this is applicable to my problem, it would result in the loss of too much information and the ANN would fail to perform well.
Passing in an error value (eg -1) or default value (eg 0) for non-existant input
I'm not sure how well this would work, in theory the ANN could easily learn from this input and model the function appropriately. In practise I'm worried about the sheer number of non-existant input causing problems for the ANN. For example if the range of players was 2-10, if there were only 2 players, 80% of the input data would be non-existant and would introduce weird bias into the ANN resulting in a poor performance.
Passing in the mean value over the training set in place on non-existant input
Again, the amount of non-existant input would be a problem, and I'm worried this would introduce weird problems for discrete-valued inputs.
So, I'm asking this, does anybody have any other solutions I could think about? And is there a standard or commonly used method for handling this problem?
I know it's a rather niche and complicated question for SO, but I was getting bored of the "how do I fix this code?" and "how do I do this in PHP/Javascript?" questions :P, thanks guys.
It sounds like you have multiple data sets (for each number of players) that aren't really compatible with each other. Would lessons learned from a 5-player game really apply to a 2-player game? Try simplifying the problem, such as #1, and see how the program performs. In AI, absurd simplifications can sometimes give you a lot of traction, like bag of words in spam filters.
Try thinking about some model like the following:
Say xi (e.g. x1) is one of the inputs that a variable number of can exist. You can have n of these (x1 to xn). Let y be the rest of the inputs.
On your first hidden layer, pass x1 and y to the first c nodes, x1,x2 and y to the next c nodes, x1,x2,x3 and y to the next c nodes, and so on. This assumes x1 and x3 can't both be active without x2. The model will have to change appropriately if this needs to be possible.
The rest of the network is a standard feed-forward network with all nodes connected to all nodes of the next layer, or however you choose.
Whenever you have w active inputs, disable all but the wth set of c nodes (completely exclude them from training for that input set, don't include them when calculating the value for the nodes they output to, don't update the weights for their inputs or outputs). This will allow most of the network to train, but for the first hidden layer, only parts applicable to that number of inputs.
I suggest c is chosen such that c*n (the number of nodes in the first hidden layer) is greater than (or equal to) the number of nodes in the 2nd hidden layer (and have c be at the very least 10 for a moderately sized network (into the 100s is also fine)) and I also suggest the network have at least 2 other hidden layers (so 3 in total excluding input and output). This is not from experience, but just what my intuition tells me.
This working is dependent on a certain (possibly undefinable) similarity between the different numbers of inputs, and might not work well, if at all, if this similarity doesn't exist. This also probably requires quite a bit of training data for each number of inputs.
If you try it, let me / us know if it works.
If you're interested in Artificial Intelligence discussions, I suggest joining some Linked-In group dedicated to it, there are some that are quite active and have interesting discussions. There doesn't seem to be much happening on stackoverflow when it comes to Artificial Intelligence, or maybe we should just work to change that, or both.
UPDATE:
Here is a list of the names of a few decent Artificial Intelligence LinkedIn groups (unless they changed their policies recently, it should be easy enough to join):
'Artificial Intelligence Researchers, Faculty + Professionals'
'Artificial Intelligence Applications'
'Artificial Neural Networks'
'AGI — Artificial General Intelligence'
'Applied Artificial Intelligence' (not too much going on at the moment, and still dealing with some spam, but it is getting better)
'Text Analytics' (if you're interested in that)
I have a database of items. They are for cars and similar parts (eg cam/pistons) work better than others in different combinations (eg one product will work well with another, while another combination of 2 parts may not).
There are so many possible permutations, what solutions apply to this problem?
So far, I feel that these are possible approaches (Where I have question marks, something tells me these are solutions but I am not 100% confident they are).
Neural networks (?)
Collection-based approach (selection of parts in a collection for cam, and likewise for pistons in another collection, all work well with each other)
Business rules engine (?)
What are good ways to tackle this sort of problem?
Thanks
The answer largely depends on how do you calculate 'works better'?
1) Independent values
Assuming that 'works better' function f of x combination of items x=(a,b,c,d,...) and(!) that there are no regularities that can be used to decide if f(x') is bigger or smaller then f(x) knowing only x, f(x) and x' (which could allow to find the xmax faster) you will have to calculate f for all combinations at least once.
Once you calculate it for all combinations you can sort. If you will need to look up data in a partitioned way, using SQL/RDBMS might be a good approach (for example, finding top 5 best solutions but without such and such part).
For extra points after calculating all of the results and storing them you could analyze them statistically and try to establish patterns
2) Dependent values
If you can establish some regularities (and maybe you can) regarding the values the search for the max value can be simplified and speeded up.
For example if you know that function that you try to maximize is linear combination of all the parameters then you could look into linear programming
If it is not...
All the examples I have seen of neural networks are for a fixed set of inputs which works well for images and fixed length data. How do you deal with variable length data such sentences, queries or source code? Is there a way to encode variable length data into fixed length inputs and still get the generalization properties of neural networks?
I have been there, and I faced this problem.
The ANN was made for fixed feature vector length, and so are many other classifiers such as KNN, SVM, Bayesian, etc.
i.e. the input layer should be well defined and not varied, this is a design problem.
However, some researchers opt for adding zeros to fill the missing gap, I personally think that this is not a good solution because those zeros (unreal values) will affect the weights that the net will converge to. in addition there might be a real signal ending with zeros.
ANN is not the only classifier, there are more and even better such as the random forest. this classifier is considered the best among researchers, it uses a small number of random features, creating hundreds of decision trees using bootstrapping an bagging, this might work well, the number of the chosen features normally the sqrt of the feature vector size. those features are random. each decision tree converges to a solution, using majority rules the most likely class will chosen then.
Another solution is to use the dynamic time warping DTW, or even better to use Hidden Markov models HMM.
Another solution is the interpolation, interpolate (compensate for missing values along the small signal) all the small signals to be with the same size as the max signal, interpolation methods include and not limited to averaging, B-spline, cubic.....
Another solution is to use feature extraction method to use the best features (the most distinctive), this time make them fixed size, those method include PCA, LDA, etc.
another solution is to use feature selection (normally after feature extraction) an easy way to select the best features that give the best accuracy.
that's all for now, if non of those worked for you, please contact me.
You would usually extract features from the data and feed those to the network. It is not advisable to take just some data and feed it to net. In practice, pre-processing and choosing the right features will decide over your success and the performance of the neural net. Unfortunately, IMHO it takes experience to develop a sense for that and it's nothing one can learn from a book.
Summing up: "Garbage in, garbage out"
Some problems could be solved by a recurrent neural network.
For example, it is good for calculating parity over a sequence of inputs.
The recurrent neural network for calculating parity would have just one input feature.
The bits could be fed into it over time. Its output is also fed back to the hidden layer.
That allows to learn the parity with just two hidden units.
A normal feed-forward two-layer neural network would require 2**sequence_length hidden units to represent the parity. This limitation holds for any architecture with just 2 layers (e.g., SVM).
I guess one way to do it is to add a temporal component to the input (recurrent neural net) and stream the input to the net a chunk at a time (basically creating the neural network equivalent of a lexer and parser) this would allow the input to be quite large but would have the disadvantage that there would not necessarily be a stop symbol to seperate different sequences of input from each other (the equivalent of a period in sentances)
To use a neural net on images of different sizes, the images themselves are often cropped and up or down scaled to better fit the input of the network. I know that doesn't really answer your question but perhaps something similar would be possible with other types of input, using some sort of transformation function on the input?
i'm not entirely sure, but I'd say, use the maximum number of inputs (e.g. for words, lets say no word will be longer than 45 characters (longest word found in a dictionary according to wikipedia), and if a shorter word is encountered, set the other inputs to a whitespace character.
Or with binary data, set it to 0. the only problem with this approach is if an input filled with whitespace characters/zeros/whatever collides with a valid full length input (not so much a problem with words as it is with numbers).