I created a database on my local machine and then did a backup called tables.bak of table DataLabTables.
I moved that backup to a remote machine without that table and tried to do a restore but get the following error:
System.Data.SqlClient.SqlError: The operating system returned the
error '5(Access is denied.)' while attempting
'RestoreContainer::ValidateTargetForCreation' on 'c:\Program
Files\Microsoft SQL Server\MSSQL.1\MSSQL\DataLabTables.mdf'.
How do I fix my rights, if that is the problem?
I have just had this issue with SQL Server 2012.
It turns out all I had to do was tick the box marked 'Relocate all files to folder' on the 'Files' section:
(Click to see image full size)
This of course assumes you have the correct version of SQL Server installed.
From the error message, it says there's an error when validating the target (c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DataLabTables.mdf) of your restore operation.
That sounds like:
a) that file already exists (because you've already restored it previously) and is in use by SQL Server
or
b) that directory doesn't exist at all
In your question, you mentioned you created a backup for that table - that's not how SQL Server backups work. Those backups are always the whole database (or at least one or several filegroups from that database).
My hunch is: you've already restored that database previously, and now, upon a second restore, you didn't check the checkbox "Overwrite existing database" in your restore wizard - thus the existing file cannot be overwritten and the restore fails.
The user that's running the restore on your remote server obviously doesn't have access to that directory on the remote server.
C:\program files\.... is a protected directory - normal (non-admin) users don't have access to this directory (and its subdirectories).
Easiest solution: try putting your BAK file somewhere else (e.g. C:\temp) and restore it from there
I was having the same problem. It turned out that my SQL Server and SQL Server Agent services logon as were running under the Network Services account which didn't have write access to perform the restore of the back up.
I changed both of these services to logon on as Local System Account and this fixed the problem.
Recently I faced this issue with SQL 2008 R2 and the below solution worked for me:
1) Create a new database with the same name as the one you are trying to restore
2) While restoring, use the same name you used above and in the options, click the overwrite option
You might give the above a shot if the other solutions don't work.
The backup creator had MSSql version 10 installed, so when he took the backup it also stores the original file path (to be able to restore it in same location), but I had version 11, so it could not find the destination directory.
So I changed the output file directory to C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\, and it was able to restore the database successfully.
Source
I had a similar problem. I tried to restore a 2005 .bak file, and i received exactly the same error. I selected the overwrite option as well to no avail.
my solution was to grant the SQL user access to the directory in question, by going to the folder and editing the access rights through the property screen.
lost a couple of hours to this problem too. got it going though:
"access denied" in my case really did mean "access denied". mssqlstudio's user account on my windows device did NOT have full control of the folder specified in the error message. i gave it full control. access was no longer denied and the restore succeeded.
why was the folder locked up for studio ? who knows ? i got enough questions to deal with as it is without trying to answer more.
I had this issue, I logged in as administrator and it fixed the issue.
Another scenario could be the existence of multiple database paths. First, make note of the path where new databases are currently being stored. So if you create a new empty database and then do Tasks/Restore, make sure that the path the restore is trying to use is the same directory that the empty database was created in. Even if the restore path is legal, you will still get the access denied error if it is not the current path you are working with. Very easy to spot when the path is not legal, much harder to spot when the path is legal, but not the current path.
Sorry because I cannot comment...
I had the same problem. In my case the problem was related to trying to restore in an old sql server folder (that existed on the server). This is due to old sql server backup (i.e. SQL Server 2012 Backup) restored in a new sql server (SQL Server 2014). The real issue is not too different from #marc_s answer. Anyway, I changed only the target folder to the new SQL Server DATA folder.
This may not be the best solution, but I was trying to do the restore at SQL Server 2005, but I changed to SQL Server 2008 and it worked.
Got problem like this. Error caused by enabled compression on SQL Server folders.
Frnds... I had the same issue while restroring database and tried every solution but could nt get resolved. Then i tried to re install SQL 2005 and the problem solved. Actully last time i forgot to check on customize option while instlling SQL.. It comes two times while installing and i checkd it for ones only..
In my case - I had to double check the Backup path of the database from where I was restoring. I had previously restored it from a different path when I did it the first time. I fixed the Backup path to use the backup path I used the first time and it worked!
I ended up making new folders for Data and Logs and it worked properly, must have been a folder/file permission issue.
This also happens if the paths are correct, but the service account is not the owner of the data files (yet it still has enough rights for read/write access). This can occur if the permissions for the files were reset to match the permissions of the folder (of course, while the service was stopped).
The easiest solution in this case is to detach each database and attach it again (because when attaching the owner is changed to be the service account).
Try this:
In the Restore DB wizard window, go to Files tab, Uncheck "Relocate All files to folder" check box then change the restore destination from C: to some other drive. Then proceed with the regular restore process. It will get restored successfully.
I had the same problem but I used sql server 2008 r2, you must check in options and verify the paths where sql going to save the files .mdf and .ldf you must select the path of your sql server installation. I solved my problem with this, I hope it helps you.
Then try moving it to a sub folder under the C:, but verify that the user has full rights on the folder your use.
Related
On Ubuntu 17.04, I have a .bak file in /var/opt/mssql/backup/ that I am trying to restore to a separate partition because the partition I have SQL Server installed on does not have enough room for the database to be restored to.
I am getting an error like the following: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on '/media/<my-user-name>/<some-folder>/<mdf-file>.mdf'.
I've tried to use chmod and chown to change the permissions of that folder on the second partition, but I'm not getting it quite right because I still get the error.
What user is trying to write to that folder in the second partition?
How do I get that user account permissions to successfully restore the database to that folder?
I had this second hard drive connected via a caddy and was able to perform this task no problem. But as soon as I installed the ssd internally, Ubuntu has not allowed whatever user account I'm using in the SQL Server CLI for it this time.
Thanks!
Update
I changed the owner of the second partition/ssd to mssql and now I have permission to restore the database to this location. I would assume that if the owner of that whole ssd is mssql, I might have other permission issues down the road using this ssd for other things. Is there a way to configure this so that my personal user account as well as mssql has permissions to this folder enough to own it? I don't think two different accounts can own a folder, but is there a way to permit multiple accounts with sufficient access to perform these actions?
I won't pretend to be knowledgeable about this, but I had a permissions issue while trying to restore a .bak that was on a network vm to my local device, it worked when I added it to a .zip with 7-share, then copied it to the location I wanted and extracted it.
I had the permissions issue when I tried to move it without zipping, and as far as I remember I still had this issue when I used send to compressed (zipped) folder. I'm not sure why, maybe someone else can elaborate
I solve the problem by deleting the old database, creating a new one and restoring the backup to the new one.
My problem was probably cause by the fact that I had created the database in evalutation edition of MS SQL Server and I wanted to rewrite it by backup in new instalation of developer edition.
Solved. See my answer (but first see my second edit to the question).
I'm trying to restore a backup for a database from one computer on another - thereby copying the db, but I get this message:
System.Data.SqlClient.SqlError: The operating system returned the
error '5(Access is denied.)' while attempting
'RestoreContainer::ValidateTargetForCreation' on 'c:\Program
Files\Microsoft SQL Server...'. (Microsoft.SqlServer.SmoExtended)
Why is this? I can create new databases, so why not restore? Is it because it's from another computer? (I read that that's actually a usual way to copy a db so this shouldn't be the problem.)
I don't have much experience with this so don't rule out any obvious explanation.
EDIT :
I can 'restore' it using the administrator user account to the administrator's instance of SQL Server (I have two - one for the administrator, and one for the regular account.) but can't do it from either account to the regular user's instance of SQL Server.
EDIT 2 :
It seems that there are already existing files with the backup's files names (even though I changed the existing db's name). I'm working on that now (Trying, still unsuccessfully, to restore to different file names).
The solution was to make sure that the database was created in the MSSQL11.MSSQLSERVER folder (as opposed to the MSSQL10_50.SQLEXPRESS folder). Then SSMS succeeded in 'restoring' the database.
I just got this error with SQLSERVER14 .All I did is just checking the "Relocate all files to folder" checkbox in files tab of the restoration wizard.
The database got restored successfully.
Faced the similar problem. windows security is preventing to Restore the DB to 'Target' location. Fixing security settings can resolve this issue.
Right click on the Target folder-> Properties -> Security -> Select appropriate user and then Edit the permissions ( I have given Full Access to the user). Hope this would fix the problem.
When I got this error message my .bak file was located on my desktop (e.g."C:\Users\[username]\Desktop\database.bak").
When I moved the .bak file to my C drive instead the restore succeeded.
I'm running the copy database wizard on a 2008 R2 instance of SQL Server.
The database I want to copy is a SQL 2000 database.
I'm copy that database to another SQL SErver 2008 R2.
The wizard uses SQL authentication for both servers, and both are sysadmins.
When I run it, I get the following error (FYI I have tried both copying the logins and leaving them out):
Event Name: OnError
Message: ERROR : errorCode=-1073548784 description=Executing the query "sys.sp_addrolemember #rolename = N'RandomRoleName..." failed with the following error: "The role 'RandomRoleName' does not exist in the current database.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
helpFile= helpContext=0 idofInterfaceWithError={C81DFC5A-3B22-4DA3-BD3B-10BF861A7F9C}
StackTrace: at Microsoft.SqlServer.Management.Dts.DtsTransferProvider.ExecuteTransfer()
at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferDatabasesUsingSMOTransfer()
Any help would be appreciated!
Jim
My suggestion is dont use the copy database wizard. Create a full backup of the database on the 2000 server and then restore it on the 2008 server.
If you google "Microsoft.SqlServer.Management.Dts.DtsTransferProvider.ExecuteTransfer Copy Database Wizard" you will find that many many people have gotten this same error or other nearly identical smo errors... no-one appears to have gotten past it.
That's isn't to say its impossible... just, restoring a backup is so much easier then the wizard or troubleshooting the wizard. Good luck.
The copy wizard had missed some security and IIRC it's caused by subtle differences in security tables, principals etc between the 2 versions.
Frankly, the easiest way is to do one of these two:
backup/restore
detach, copy, attach
If you don't have access to the O/S and can't get it, another option is to create the missing role(s) in the background as the copy runs. You have to catch it between the creation of the files and when it tries to reference the roles, but there are a few seconds in which to create them if you keep clicking execute - I managed to create 9 roles.
Unfortunately, you'll end up with the roles in another database too (while yours cannot be used) so those need to be deleted.
Of course, this is only an option when you really can't use the other method.
Though the answer which is using the backup technique solves the problem generally, after facing the same issue several times, I was able to trace down the root of the problem using the Event Viewer of Windows to that the Database Copy wizard, using the SQL Agent, will eventually create a Job for the agent to run, after which the Agent will run using its own credentials (i.e. the credentials that you can look up in Windows Services, in my case, NT Service\SQLAgent$SQL2014)
All you need to do is to go the folder where SQL Server creates DB files (e.g. C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA by default for SQL 2014) and give the SQL Agent windows user write/read access on the folder.
The reason can be that a file with the new Database name already exist on the filesystem. We encountered this when we renamed Database X to X_Old, and tried to copy database Y to X. This cannot be done, because database X_Old is still associated with the filename X.
Either delete the conflicting database, or rename the file on the file system.
See http://codecopy.wordpress.com/2012/01/03/error-while-copying-a-database/
I want to restore a database from a file (Tasks → Restore → Database; after I select from device and select file) via SQL Server Management Studio.
After that, I get this error:
The operating system returned the error '5(Access is denied.)' while attempting
'RestoreContainer::ValidateTargetForCreation' on 'E:\Program Files\Microsoft SQL
Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\XXXXXX.mdf'.
Msg 3156, Level 16, State 8, Server XXXX, Line 2
How do I fix this problem? Is it a security error?
I recently had this problem. The fix for me was to go to the Files page of the Restore Database dialog and check "Relocate all files to folder".
The account that sql server is running under does not have access to the location where you have the backup file or are trying to restore the database to. You can use SQL Server Configuration Manager to find which account is used to run the SQL Server instance, and then make sure that account has full control over the .BAK file and the folder where the MDF will be restored to.
Well, In my case the solution was quite simple and straight.
I had to change just the value of log On As value.
Steps to Resolve-
Open Sql Server Configuration manager
Right click on SQL Server (MSSQLSERVER)
Go to Properties
change log On As value to LocalSystem
Hoping this will help you too :)
I just ran into this same problem but had a different fix. Essentially I had both SQL Server and SQL Server Express installed on my computer. This wouldn't work when I attempted to restore to SQL Express, but worked correctly when I restored it to SQL Server.
A good solution that can work is go to files > and check the reallocate all files
I tried the above scenario and got the same error 5 (access denied). I did a deep dive and found that the file .bak should have access to the SQL service account. If you are not sure, type services.msc in Start -> Run then check for SQL Service logon account.
Then go to the file, right-click and select Security tab in Properties, then edit to add the new user.
Finally then give full permission to it in order to give full access.
Then from SSMS try to restore the backup.
I was getting the same error while trying to restore SQL 2008 R2 backup db in SQL 2012 DB. I guess the error is due to insufficient permissions to place .mdf and .ldf files in C drive. I tried one simple thing then I succeeded in restoring it successfully.
Try this:
In the Restore DB wizard windows, go to Files tab, change the restore destination from C: to some other drive. Then proceed with the regular restore process. It will definitely get restores successfully!
Hope this helps you too. Cheers :)
There are several causes for this error, I got this error because I checked "Reallocate all files to folder" in the Files tab of Restore Database window but the default path did not exist on my local machine. I had the ldf/mdf files in another folder, once I changed that I was able to restore.
The operating system returned the error '5(access denied.)' when restoring database in sql server can be solved by enabling the Relocate all files to folder in the Files options as follows:
I found this, and it worked for me:
CREATE LOGIN BackupRestoreAdmin WITH PASSWORD='$tr0ngP#$$w0rd'
GO
CREATE USER BackupRestoreAdmin FOR LOGIN BackupRestoreAdmin
GO
EXEC sp_addsrvrolemember 'BackupRestoreAdmin', 'dbcreator'
GO
EXEC sp_addrolemember 'db_owner','BackupRestoreAdmin'
GO
In my case I had to check the box in Overwrite the existing database (WITH REPLACE) under Options tab on Restore Database page.
The reason I was getting this error: because there was already an MDF file present for the database and it was not getting overwritten.
Hope this will help someone.
If you're attaching a database, take a look at the "Databases to attach" grid, and specifically in the Owner column after you've specified your .mdf file. Note the account and give Full Permissions to it for both mdf and ldf files.
I had exactly same problem but my fix was different - my company is encrypting all the files on my machines. After decrypting the file MSSQL did not have any issues to accessing and created the DB. Just right click .bak file -> Properties -> Advanced... -> Encrypt contents to secure data.
this happened to me earlier today, i was a member of the local server's admin group and have unimpeded access, or i thought so. I also ticked the "replace" option, even though there is no such DB in the instance.
Found out that there used to be DB of the same name there, and the MDF and LDF files are still physically located at the data and log folders of the server, but the actual metadata is missing in the sys.databases. the service account of SQL server also can't ovewrwrite the existing files. Found out also that the files' owner is "unknown", i had to change ownership, to the 2 files above so that it is now owned by the local server's admin group, then renamed it.
Then finally, it worked.
The account does not have access to the location for backup file.
Take the following steps to access the SQL Server Configuration Manager via Computer Manager easily
Click the Windows key + R to open the Run window.
Type compmgmt.msc in the Open: box.
Click OK.
Expand Services and Applications.
Expand SQL Server Configuration Manager.
Change User Account in Log On As tab .
Now you can Restore Data Base easily
The fix for me was to go into Options when trying to Restore the database and change the path to the new path.
Here is the screenshot
I encountered the same problem, but my setup is a bit different.
I run my database in a linux docker container
sqlserver management tool in Windows.
What I did was:
sudo docker exec -u root -it sqlserver /bin/bash
This enters the docker container as a root user.
Then:
chmod 777 /path/to/file.bak
777 gives read, write & execute permissions to the file for any group, user
I had to uninstall SQL Server 2005, because it was configured to be used only in windows authentication mode, and install it again in mixed mode. I had to take a backup of my only database there, and restore it again on installing the sql server back, though the backup was taken successfully but when am trying to restore it, it is giving me an error as
System.Data.SqlClient.SqlError: The media has 2 media families but only 1 are provided. All members must be provided. (Microsoft.SqlServer.Smo)
I am using SQL server management studio, and trying to restore the database by right clicking on the databases folder, selecting restore database option, and then providing a database name, in "destination for restore", and in "source for restore" am selecting from device option and then providing with the path of my .bak file(backup file of the database), but the thing is not working, saying that the restored has failed and giving the above mentioned description for the error.
I suggest that you do not use the SSMS GUI to perform your database RESTORE unless you are familiar with all of the various options and settings. Using the T-SQL RESTORE command you can define explicitly what you are looking to do.
I would suggest that you first verify your database backup file by using the RESTORE VERIFYONLY command.
See SQL Server Books online:
http://msdn.microsoft.com/en-us/library/ms188902.aspx
Is there any chance you backed up to two backup files (ie, striped backup), and you're only specifying one of them in the restore? The restore seems to be complaining that if can't find all the files it needs to start the restore.
if you haven't already tried this: crate a blank database with the exact same name as the data base you're restoring from, with the files at the exact same location. right click the blank database and restore from your backup.