I have a Silverlight application with some appSettings in my Web.Config file. Now I want to make it OOB, what is the best way to handle this.
Should I download config file using WebClient when running in OOB.
Please suggest if you have any good method?
Any "app settings" in a Web.Config are only used by the web/server part of your Silverlight application. Not by the client application (unless you pass them on to the client).
It should not make any difference if your Silverlight App is running OOB... It is still just a client app, requiring information from your web server (if you wish to pass them on).
Basically, you should not need to change anything, unless you are doing something wrong in the first place. Can you explain what sort of settings you are needing in your client application?
Related
Last year someone reported encountering this problem ("The Silverlight project you are about to debug uses web services. Calls to the web service will fail unless the silverlight project is hosted in and launched from the same web project that contains the web services.") and accepted the answer to "set the web project which hosts the Silverlight application to be your startup project."
I'm seeing the same message, but think the solution might have to be different. I am building in VS 2010 a Silverlight application to access the Google Weather API, with VB as the code-behind. The API will return a XML file with data for the specified city (ex., "http://www.google.com/ig/api?weather=london,england"). The Solution Explorer only shows my VB/Silverlight project ("GetWeather"), and the Project Properties dialog box shows the Startup Object as "GetWeather.App" -- the only choice. I'm trying to use a WebClient object to make the call and an XDocument object to parse the return. But I repeatedly get the above error message, with no other result. What am I doing wrong?
Thank you in advance!
I would add a simple Web project and configure it to host the Silverlight app. You'll need to host the app somewhere anyways, so why not create a stub ASP.NET application in your solution? The easiest way is to create a new Silverlight app solution selecting an ASP.NET web project as the host, and then copying your existing code to that solution. Then you should set the web project as the startup one. This should make debugging a lot easier.
Besides, do remember to configure the client access policy to enable cross-domain calls. Check out this article
I want to send simple data (geolocation data to be precise) from Windows Phone 7 application to a windows forms application and use it, as I'm a total beginner in this field I don't know which tools to use.
I searched about wcf services and tested this method but there's some issues: the data is sent from the phone application but isn't sent to the winforms application (guess something is missing)
If your know how to do this in a quick way, or have good tutorials I'll be thankful.
EDIT
I found this tutorial, it show how to connect directly wp7 application and desktop application without using sockets neither wcf service, I'm wondering if it is really works if the application isn't in localhost.
the like for the tutorial: wp7 tutorial
I had a similar problem and so I created a REST/JSON WCF service hosted in IIS with AppHarbor to provide the data. There's hundreds of ways to do it (Ruby/Heroku, etc..), but that particular one fits well within the Microsoft stack. I also needed to share route data and I used the WCF service to wrap the BingMaps services so that route computations are cached and shared. Considering that I had already created a local model, moving it out of my phone project into a service took less than a few hours (including the usual config hiccups, and forgetting to add the appharbor user to my bitbucket repo).
Consuming the service from WinForms (or any client) shouldn't be an issue as the service knows nothing about the client implementation.
Here's a tutorial from code project. REST WCF Service with JSON
I think you would need to implement some sort of server side solution which you could upload to on your Windows Phone and download from on your Windows Form application. This could be achieved using a WCF service which was connected to a server side database.
Another option would be to use sockets and communicate directly with your WinForms application. Check this tutorial on how to use basic sockets on WP7.
I want to use Silverlight to parse http://www.downforeveryoneorjustme.com/http://bing.com/ and see if "bing.com" is up. Is this possible in a Silverlight site (running in-browser with no elevated trust)?
It's possible if you can get their participation- they'd need a clientaccesspolicy.xml or crossdomain.xml that allows your hosting domain (or all domains) access. Without that, you're pretty much hosed for direct access from Silverlight without elevated trust.
That said, you could easily have the server that's hosting your Silverlight xap make the outbound connection via a service call, then proxy the result back to a Silverlight client.
I am using a silverlight with wcf and when I use the .web project then it runs but when use the silver light project to run the following exception throws:
An error occurred while trying to make a request to URI 'http://localhost:9000/Services/BLWCFSvrc.svc'. This could be due to attempting to access a service in a cross-domain way without a proper cross-domain policy in place, or a policy that is unsuitable for SOAP services. You may need to contact the owner of the service to publish a cross-domain policy file and to ensure it allows SOAP-related HTTP headers to be sent. This error may also be caused by using internal types in the web service proxy without using the InternalsVisibleToAttribute attribute. Please see the inner exception for more details.
I want to use the silverlight project to debug my code
Thanks in advance
In order to access network resources from Silverlight, the domain hosting the resource must provide a client access policy file; this is designed this way for security reasons. See here for details: http://msdn.microsoft.com/en-us/library/cc645032%28VS.95%29.aspx
I think your problem is different that just having the clientaccesspolicy.xml, the fact that it runs under the web project, means that you are delivering policies, if you have those added as seperate files under the web project then they wont be deployed when you run the SL3 app seperately, but im sure you figured this out and you're delivering the policies via WCF using webHttp binding (RESTful style), if not, you should.
I think the problem is that when you run the webproject, it builds to your local IIS and executes from there, IIS will allow the SL3 app to communicate with ports/addresses different from the ones that the site is hosted on
when you run SL3 app natively, VS2008 auto generates a test html site for it to be hosted in with some default settings, and uses VS2008 built-in hosting service, which does not allow communication to an address/port different from that of the hosting address. (even though Silverlight is a client side library, VS2008 can do this)
so if you want to run the Silverlight application natively, meaning actually executing the XAP, you can deploy it to IIS, and configure IIS to deliver XAP files, or just install it and run it out of browser and let it update from IIS the deployed version
Just copy a clientaccesspolicy.xml file (for an example take a look at this post; you can even use this sample) into the root of your webserver (eg: c:\inetpub\wwwroot\).
This should help.
I've got a Silverlight application which uses a built-in .ASMX WebService to access a SQL database and run some queries. Everything runs without any hitches on my Development machine.
I'm trying to deploy the application to IIS 6 and I'm having some issues.
The Silverlight application itself seems to run fine, however the Web Service does not. I get an unhandled exception error that says [Async_ExceptionOcurred] as soon as the page loads (when the page loads I'm making some Async WebService method calls).
I think this is an issue with the Web Service but I don't know what the problem is. I tried setting the WebService namespace to my URL, but that didn't work. I've tried messing with the SQL connection string in my Web Config but that also affects nothing.
One thing to note is that my IIS Virtual Directory only contains my SilverlightApp.Web folder. I know that the other folder that's part of the application contains a .ClientSettings file for the WebService, but I think this is embedded into the .xap.
Can anyone shed any light on this?
The most likely thing that's happening:
Your webservice proxy on the client is using the address of the web service it was built against: ("http://localhost...").
Things to do:
Use fiddler to confirm this is the issue. It will show you where the proxy is making the call to.
Use the overloaded constructor for the web service and specify a URI. Consider using id/deffing for debug/release. This will overwrite the settings in the client.config.
Create another endpoint in the client config for the release build (Shawn's article here) and select one or the other (again using if/defs).
There are other options as well (looking at the URI and building up the service adress)... but that's the general idea.
hth,
Erik