Trivial question.
#!/bin/bash
if test -z "$1"
then
echo "No args!"
exit
fi
for newname in $(cat $1); do
echo $newname
done
I want to replace that echo inside the loop with array population code.
Then, after the loop ends, I want to read the array again and echo the contents.
Thanks.
If the file, as your code shows, has a set of files, each in one line, you can assign the value to the array as follows:
array=(`cat $1`)
After that, to process every element you can do something like:
for i in ${array[#]} ; do echo "file = $i" ; done
declare -a files
while IFS= read -r
do
files+=("$REPLY") # Array append
done < "$1"
echo "${files[*]}" # Print entire array separated by spaces
cat is not needed for this.
#!/bin/bash
files=( )
for f in $(cat $1); do
files[${#files[*]}]=$f
done
for f in ${files[#]}; do
echo "file = $f"
done
Related
In the following program, if I set the variable $foo to the value 1 inside the first if statement, it works in the sense that its value is remembered after the if statement. However, when I set the same variable to the value 2 inside an if which is inside a while statement, it's forgotten after the while loop. It's behaving like I'm using some sort of copy of the variable $foo inside the while loop and I am modifying only that particular copy. Here's a complete test program:
#!/bin/bash
set -e
set -u
foo=0
bar="hello"
if [[ "$bar" == "hello" ]]
then
foo=1
echo "Setting \$foo to 1: $foo"
fi
echo "Variable \$foo after if statement: $foo"
lines="first line\nsecond line\nthird line"
echo -e $lines | while read line
do
if [[ "$line" == "second line" ]]
then
foo=2
echo "Variable \$foo updated to $foo inside if inside while loop"
fi
echo "Value of \$foo in while loop body: $foo"
done
echo "Variable \$foo after while loop: $foo"
# Output:
# $ ./testbash.sh
# Setting $foo to 1: 1
# Variable $foo after if statement: 1
# Value of $foo in while loop body: 1
# Variable $foo updated to 2 inside if inside while loop
# Value of $foo in while loop body: 2
# Value of $foo in while loop body: 2
# Variable $foo after while loop: 1
# bash --version
# GNU bash, version 4.1.10(4)-release (i686-pc-cygwin)
echo -e $lines | while read line
...
done
The while loop is executed in a subshell. So any changes you do to the variable will not be available once the subshell exits.
Instead you can use a here string to re-write the while loop to be in the main shell process; only echo -e $lines will run in a subshell:
while read line
do
if [[ "$line" == "second line" ]]
then
foo=2
echo "Variable \$foo updated to $foo inside if inside while loop"
fi
echo "Value of \$foo in while loop body: $foo"
done <<< "$(echo -e "$lines")"
You can get rid of the rather ugly echo in the here-string above by expanding the backslash sequences immediately when assigning lines. The $'...' form of quoting can be used there:
lines=$'first line\nsecond line\nthird line'
while read line; do
...
done <<< "$lines"
UPDATED#2
Explanation is in Blue Moons's answer.
Alternative solutions:
Eliminate echo
while read line; do
...
done <<EOT
first line
second line
third line
EOT
Add the echo inside the here-is-the-document
while read line; do
...
done <<EOT
$(echo -e $lines)
EOT
Run echo in background:
coproc echo -e $lines
while read -u ${COPROC[0]} line; do
...
done
Redirect to a file handle explicitly (Mind the space in < <!):
exec 3< <(echo -e $lines)
while read -u 3 line; do
...
done
Or just redirect to the stdin:
while read line; do
...
done < <(echo -e $lines)
And one for chepner (eliminating echo):
arr=("first line" "second line" "third line");
for((i=0;i<${#arr[*]};++i)) { line=${arr[i]};
...
}
Variable $lines can be converted to an array without starting a new sub-shell. The characters \ and n has to be converted to some character (e.g. a real new line character) and use the IFS (Internal Field Separator) variable to split the string into array elements. This can be done like:
lines="first line\nsecond line\nthird line"
echo "$lines"
OIFS="$IFS"
IFS=$'\n' arr=(${lines//\\n/$'\n'}) # Conversion
IFS="$OIFS"
echo "${arr[#]}", Length: ${#arr[*]}
set|grep ^arr
Result is
first line\nsecond line\nthird line
first line second line third line, Length: 3
arr=([0]="first line" [1]="second line" [2]="third line")
You are asking this bash FAQ. The answer also describes the general case of variables set in subshells created by pipes:
E4) If I pipe the output of a command into read variable, why
doesn't the output show up in $variable when the read command finishes?
This has to do with the parent-child relationship between Unix
processes. It affects all commands run in pipelines, not just
simple calls to read. For example, piping a command's output
into a while loop that repeatedly calls read will result in
the same behavior.
Each element of a pipeline, even a builtin or shell function,
runs in a separate process, a child of the shell running the
pipeline. A subprocess cannot affect its parent's environment.
When the read command sets the variable to the input, that
variable is set only in the subshell, not the parent shell. When
the subshell exits, the value of the variable is lost.
Many pipelines that end with read variable can be converted
into command substitutions, which will capture the output of
a specified command. The output can then be assigned to a
variable:
grep ^gnu /usr/lib/news/active | wc -l | read ngroup
can be converted into
ngroup=$(grep ^gnu /usr/lib/news/active | wc -l)
This does not, unfortunately, work to split the text among
multiple variables, as read does when given multiple variable
arguments. If you need to do this, you can either use the
command substitution above to read the output into a variable
and chop up the variable using the bash pattern removal
expansion operators or use some variant of the following
approach.
Say /usr/local/bin/ipaddr is the following shell script:
#! /bin/sh
host `hostname` | awk '/address/ {print $NF}'
Instead of using
/usr/local/bin/ipaddr | read A B C D
to break the local machine's IP address into separate octets, use
OIFS="$IFS"
IFS=.
set -- $(/usr/local/bin/ipaddr)
IFS="$OIFS"
A="$1" B="$2" C="$3" D="$4"
Beware, however, that this will change the shell's positional
parameters. If you need them, you should save them before doing
this.
This is the general approach -- in most cases you will not need to
set $IFS to a different value.
Some other user-supplied alternatives include:
read A B C D << HERE
$(IFS=.; echo $(/usr/local/bin/ipaddr))
HERE
and, where process substitution is available,
read A B C D < <(IFS=.; echo $(/usr/local/bin/ipaddr))
Hmmm... I would almost swear that this worked for the original Bourne shell, but don't have access to a running copy just now to check.
There is, however, a very trivial workaround to the problem.
Change the first line of the script from:
#!/bin/bash
to
#!/bin/ksh
Et voila! A read at the end of a pipeline works just fine, assuming you have the Korn shell installed.
This is an interesting question and touches on a very basic concept in Bourne shell and subshell. Here I provide a solution that is different from the previous solutions by doing some kind of filtering. I will give an example that may be useful in real life. This is a fragment for checking that downloaded files conform to a known checksum. The checksum file look like the following (Showing just 3 lines):
49174 36326 dna_align_feature.txt.gz
54757 1 dna.txt.gz
55409 9971 exon_transcript.txt.gz
The shell script:
#!/bin/sh
.....
failcnt=0 # this variable is only valid in the parent shell
#variable xx captures all the outputs from the while loop
xx=$(cat ${checkfile} | while read -r line; do
num1=$(echo $line | awk '{print $1}')
num2=$(echo $line | awk '{print $2}')
fname=$(echo $line | awk '{print $3}')
if [ -f "$fname" ]; then
res=$(sum $fname)
filegood=$(sum $fname | awk -v na=$num1 -v nb=$num2 -v fn=$fname '{ if (na == $1 && nb == $2) { print "TRUE"; } else { print "FALSE"; }}')
if [ "$filegood" = "FALSE" ]; then
failcnt=$(expr $failcnt + 1) # only in subshell
echo "$fname BAD $failcnt"
fi
fi
done | tail -1) # I am only interested in the final result
# you can capture a whole bunch of texts and do further filtering
failcnt=${xx#* BAD } # I am only interested in the number
# this variable is in the parent shell
echo failcnt $failcnt
if [ $failcnt -gt 0 ]; then
echo $failcnt files failed
else
echo download successful
fi
The parent and subshell communicate through the echo command. You can pick some easy to parse text for the parent shell. This method does not break your normal way of thinking, just that you have to do some post processing. You can use grep, sed, awk, and more for doing so.
I use stderr to store within a loop, and read from it outside.
Here var i is initially set and read inside the loop as 1.
# reading lines of content from 2 files concatenated
# inside loop: write value of var i to stderr (before iteration)
# outside: read var i from stderr, has last iterative value
f=/tmp/file1
g=/tmp/file2
i=1
cat $f $g | \
while read -r s;
do
echo $s > /dev/null; # some work
echo $i > 2
let i++
done;
read -r i < 2
echo $i
Or use the heredoc method to reduce the amount of code in a subshell.
Note the iterative i value can be read outside the while loop.
i=1
while read -r s;
do
echo $s > /dev/null
let i++
done <<EOT
$(cat $f $g)
EOT
let i--
echo $i
How about a very simple method
+call your while loop in a function
- set your value inside (nonsense, but shows the example)
- return your value inside
+capture your value outside
+set outside
+display outside
#!/bin/bash
# set -e
# set -u
# No idea why you need this, not using here
foo=0
bar="hello"
if [[ "$bar" == "hello" ]]
then
foo=1
echo "Setting \$foo to $foo"
fi
echo "Variable \$foo after if statement: $foo"
lines="first line\nsecond line\nthird line"
function my_while_loop
{
echo -e $lines | while read line
do
if [[ "$line" == "second line" ]]
then
foo=2; return 2;
echo "Variable \$foo updated to $foo inside if inside while loop"
fi
echo -e $lines | while read line
do
if [[ "$line" == "second line" ]]
then
foo=2;
echo "Variable \$foo updated to $foo inside if inside while loop"
return 2;
fi
# Code below won't be executed since we returned from function in 'if' statement
# We aready reported the $foo var beint set to 2 anyway
echo "Value of \$foo in while loop body: $foo"
done
}
my_while_loop; foo="$?"
echo "Variable \$foo after while loop: $foo"
Output:
Setting $foo 1
Variable $foo after if statement: 1
Value of $foo in while loop body: 1
Variable $foo after while loop: 2
bash --version
GNU bash, version 3.2.51(1)-release (x86_64-apple-darwin13)
Copyright (C) 2007 Free Software Foundation, Inc.
Though this is an old question and asked several times, here's what I'm doing after hours fidgeting with here strings, and the only option that worked for me is to store the value in a file during while loop sub-shells and then retrieve it. Simple.
Use echo statement to store and cat statement to retrieve. And the bash user must chown the directory or have read-write chmod access.
#write to file
echo "1" > foo.txt
while condition; do
if (condition); then
#write again to file
echo "2" > foo.txt
fi
done
#read from file
echo "Value of \$foo in while loop body: $(cat foo.txt)"
In the following program, if I set the variable $foo to the value 1 inside the first if statement, it works in the sense that its value is remembered after the if statement. However, when I set the same variable to the value 2 inside an if which is inside a while statement, it's forgotten after the while loop. It's behaving like I'm using some sort of copy of the variable $foo inside the while loop and I am modifying only that particular copy. Here's a complete test program:
#!/bin/bash
set -e
set -u
foo=0
bar="hello"
if [[ "$bar" == "hello" ]]
then
foo=1
echo "Setting \$foo to 1: $foo"
fi
echo "Variable \$foo after if statement: $foo"
lines="first line\nsecond line\nthird line"
echo -e $lines | while read line
do
if [[ "$line" == "second line" ]]
then
foo=2
echo "Variable \$foo updated to $foo inside if inside while loop"
fi
echo "Value of \$foo in while loop body: $foo"
done
echo "Variable \$foo after while loop: $foo"
# Output:
# $ ./testbash.sh
# Setting $foo to 1: 1
# Variable $foo after if statement: 1
# Value of $foo in while loop body: 1
# Variable $foo updated to 2 inside if inside while loop
# Value of $foo in while loop body: 2
# Value of $foo in while loop body: 2
# Variable $foo after while loop: 1
# bash --version
# GNU bash, version 4.1.10(4)-release (i686-pc-cygwin)
echo -e $lines | while read line
...
done
The while loop is executed in a subshell. So any changes you do to the variable will not be available once the subshell exits.
Instead you can use a here string to re-write the while loop to be in the main shell process; only echo -e $lines will run in a subshell:
while read line
do
if [[ "$line" == "second line" ]]
then
foo=2
echo "Variable \$foo updated to $foo inside if inside while loop"
fi
echo "Value of \$foo in while loop body: $foo"
done <<< "$(echo -e "$lines")"
You can get rid of the rather ugly echo in the here-string above by expanding the backslash sequences immediately when assigning lines. The $'...' form of quoting can be used there:
lines=$'first line\nsecond line\nthird line'
while read line; do
...
done <<< "$lines"
UPDATED#2
Explanation is in Blue Moons's answer.
Alternative solutions:
Eliminate echo
while read line; do
...
done <<EOT
first line
second line
third line
EOT
Add the echo inside the here-is-the-document
while read line; do
...
done <<EOT
$(echo -e $lines)
EOT
Run echo in background:
coproc echo -e $lines
while read -u ${COPROC[0]} line; do
...
done
Redirect to a file handle explicitly (Mind the space in < <!):
exec 3< <(echo -e $lines)
while read -u 3 line; do
...
done
Or just redirect to the stdin:
while read line; do
...
done < <(echo -e $lines)
And one for chepner (eliminating echo):
arr=("first line" "second line" "third line");
for((i=0;i<${#arr[*]};++i)) { line=${arr[i]};
...
}
Variable $lines can be converted to an array without starting a new sub-shell. The characters \ and n has to be converted to some character (e.g. a real new line character) and use the IFS (Internal Field Separator) variable to split the string into array elements. This can be done like:
lines="first line\nsecond line\nthird line"
echo "$lines"
OIFS="$IFS"
IFS=$'\n' arr=(${lines//\\n/$'\n'}) # Conversion
IFS="$OIFS"
echo "${arr[#]}", Length: ${#arr[*]}
set|grep ^arr
Result is
first line\nsecond line\nthird line
first line second line third line, Length: 3
arr=([0]="first line" [1]="second line" [2]="third line")
You are asking this bash FAQ. The answer also describes the general case of variables set in subshells created by pipes:
E4) If I pipe the output of a command into read variable, why
doesn't the output show up in $variable when the read command finishes?
This has to do with the parent-child relationship between Unix
processes. It affects all commands run in pipelines, not just
simple calls to read. For example, piping a command's output
into a while loop that repeatedly calls read will result in
the same behavior.
Each element of a pipeline, even a builtin or shell function,
runs in a separate process, a child of the shell running the
pipeline. A subprocess cannot affect its parent's environment.
When the read command sets the variable to the input, that
variable is set only in the subshell, not the parent shell. When
the subshell exits, the value of the variable is lost.
Many pipelines that end with read variable can be converted
into command substitutions, which will capture the output of
a specified command. The output can then be assigned to a
variable:
grep ^gnu /usr/lib/news/active | wc -l | read ngroup
can be converted into
ngroup=$(grep ^gnu /usr/lib/news/active | wc -l)
This does not, unfortunately, work to split the text among
multiple variables, as read does when given multiple variable
arguments. If you need to do this, you can either use the
command substitution above to read the output into a variable
and chop up the variable using the bash pattern removal
expansion operators or use some variant of the following
approach.
Say /usr/local/bin/ipaddr is the following shell script:
#! /bin/sh
host `hostname` | awk '/address/ {print $NF}'
Instead of using
/usr/local/bin/ipaddr | read A B C D
to break the local machine's IP address into separate octets, use
OIFS="$IFS"
IFS=.
set -- $(/usr/local/bin/ipaddr)
IFS="$OIFS"
A="$1" B="$2" C="$3" D="$4"
Beware, however, that this will change the shell's positional
parameters. If you need them, you should save them before doing
this.
This is the general approach -- in most cases you will not need to
set $IFS to a different value.
Some other user-supplied alternatives include:
read A B C D << HERE
$(IFS=.; echo $(/usr/local/bin/ipaddr))
HERE
and, where process substitution is available,
read A B C D < <(IFS=.; echo $(/usr/local/bin/ipaddr))
Hmmm... I would almost swear that this worked for the original Bourne shell, but don't have access to a running copy just now to check.
There is, however, a very trivial workaround to the problem.
Change the first line of the script from:
#!/bin/bash
to
#!/bin/ksh
Et voila! A read at the end of a pipeline works just fine, assuming you have the Korn shell installed.
This is an interesting question and touches on a very basic concept in Bourne shell and subshell. Here I provide a solution that is different from the previous solutions by doing some kind of filtering. I will give an example that may be useful in real life. This is a fragment for checking that downloaded files conform to a known checksum. The checksum file look like the following (Showing just 3 lines):
49174 36326 dna_align_feature.txt.gz
54757 1 dna.txt.gz
55409 9971 exon_transcript.txt.gz
The shell script:
#!/bin/sh
.....
failcnt=0 # this variable is only valid in the parent shell
#variable xx captures all the outputs from the while loop
xx=$(cat ${checkfile} | while read -r line; do
num1=$(echo $line | awk '{print $1}')
num2=$(echo $line | awk '{print $2}')
fname=$(echo $line | awk '{print $3}')
if [ -f "$fname" ]; then
res=$(sum $fname)
filegood=$(sum $fname | awk -v na=$num1 -v nb=$num2 -v fn=$fname '{ if (na == $1 && nb == $2) { print "TRUE"; } else { print "FALSE"; }}')
if [ "$filegood" = "FALSE" ]; then
failcnt=$(expr $failcnt + 1) # only in subshell
echo "$fname BAD $failcnt"
fi
fi
done | tail -1) # I am only interested in the final result
# you can capture a whole bunch of texts and do further filtering
failcnt=${xx#* BAD } # I am only interested in the number
# this variable is in the parent shell
echo failcnt $failcnt
if [ $failcnt -gt 0 ]; then
echo $failcnt files failed
else
echo download successful
fi
The parent and subshell communicate through the echo command. You can pick some easy to parse text for the parent shell. This method does not break your normal way of thinking, just that you have to do some post processing. You can use grep, sed, awk, and more for doing so.
I use stderr to store within a loop, and read from it outside.
Here var i is initially set and read inside the loop as 1.
# reading lines of content from 2 files concatenated
# inside loop: write value of var i to stderr (before iteration)
# outside: read var i from stderr, has last iterative value
f=/tmp/file1
g=/tmp/file2
i=1
cat $f $g | \
while read -r s;
do
echo $s > /dev/null; # some work
echo $i > 2
let i++
done;
read -r i < 2
echo $i
Or use the heredoc method to reduce the amount of code in a subshell.
Note the iterative i value can be read outside the while loop.
i=1
while read -r s;
do
echo $s > /dev/null
let i++
done <<EOT
$(cat $f $g)
EOT
let i--
echo $i
How about a very simple method
+call your while loop in a function
- set your value inside (nonsense, but shows the example)
- return your value inside
+capture your value outside
+set outside
+display outside
#!/bin/bash
# set -e
# set -u
# No idea why you need this, not using here
foo=0
bar="hello"
if [[ "$bar" == "hello" ]]
then
foo=1
echo "Setting \$foo to $foo"
fi
echo "Variable \$foo after if statement: $foo"
lines="first line\nsecond line\nthird line"
function my_while_loop
{
echo -e $lines | while read line
do
if [[ "$line" == "second line" ]]
then
foo=2; return 2;
echo "Variable \$foo updated to $foo inside if inside while loop"
fi
echo -e $lines | while read line
do
if [[ "$line" == "second line" ]]
then
foo=2;
echo "Variable \$foo updated to $foo inside if inside while loop"
return 2;
fi
# Code below won't be executed since we returned from function in 'if' statement
# We aready reported the $foo var beint set to 2 anyway
echo "Value of \$foo in while loop body: $foo"
done
}
my_while_loop; foo="$?"
echo "Variable \$foo after while loop: $foo"
Output:
Setting $foo 1
Variable $foo after if statement: 1
Value of $foo in while loop body: 1
Variable $foo after while loop: 2
bash --version
GNU bash, version 3.2.51(1)-release (x86_64-apple-darwin13)
Copyright (C) 2007 Free Software Foundation, Inc.
Though this is an old question and asked several times, here's what I'm doing after hours fidgeting with here strings, and the only option that worked for me is to store the value in a file during while loop sub-shells and then retrieve it. Simple.
Use echo statement to store and cat statement to retrieve. And the bash user must chown the directory or have read-write chmod access.
#write to file
echo "1" > foo.txt
while condition; do
if (condition); then
#write again to file
echo "2" > foo.txt
fi
done
#read from file
echo "Value of \$foo in while loop body: $(cat foo.txt)"
I have written the following script ,
#!/bin/bash
My_File=Image.csv
Value=YES
cat "$My_File" | while IFS=, read first last
do
echo "first='$first' last='$last'"
if [ "$last" == "$Value" ];
then
echo Match_Found
echo $first
array+=("$first")
echo $first is Added
fi
done
echo (${#array[#]})
It dosenot add any value to the array , Could someone point out to the issue .
The Input is as follow ,
FA_2015-01_666,NO
FA_2015-01_777,YES
FA_2015-01_888,NO
FA_2015-01_999,YES
FA_2015-01_555,YES
Redirect the file in, don't pipe from cat or the loop is run in a subshell and everything in it is lost when it ends.
#!/bin/bash
My_File="Image.csv"
Value=YES
while IFS=, read first last
do
if [ "$last" == "$Value" ];
then
echo Match_Found
echo $first
array+=("$first")
echo $first is Added
fi
done < "$My_File"
echo "${#array[#]}"
I haven't done some bash coding in some time, but it should be like this (The way i do it):
#our table to insert an item to
table=( )
tableLength=${#table[#]}
#inserting items
table[$tableLength]="foo"
#you have to refresh this variable everytime
tableLength=${#table[#]}
table[$tableLength]="bar"
#or you can do this without refreshing the length variable
table[${#table[#]}]="foobar"
I recommend you use:
table=()
table[${#table[#]}]="item!"
using # as the length, and table[#] to display all items, so it gets the length of the array and sets an item to the length of an array or table
I am trying to read a list of values from a text file, hello.txt, and store them in an array.
counter=0
cat hello.txt | while read line; do
${Unix_Array[${counter}]}=$line;
let counter=counter+1;
echo $counter;
done
echo ${Unix_Array[0]}
echo ${Unix_Array[1]}
echo ${Unix_Array[2]}
I am not able to assign values to the array Unix_Array[]... The echo statement does not print the contents of the array.
There are a few syntax errors here, but the clear problem is that the assignments are happening, but you're in an implied subshell. By using a pipe, you've created a subshell for the entire while statement. When the while statement is done, the subshell exits and your Unix_Array ceases to exist.
In this case, the simplest fix is not to use a pipe:
counter=0
while read line; do
Unix_Array[$counter]=$line;
let counter=counter+1;
echo $counter;
done < hello.txt
echo ${Unix_Array[0]}
echo ${Unix_Array[1]}
echo ${Unix_Array[2]}
By the way, you don't really need the counter. An easier way to write this might be:
$ oIFS="$IFS" # Save the old input field separator
$ IFS=$'\n' # Set the IFS to a newline
$ some_array=($(<hello.txt)) # Splitting on newlines, assign the entire file to an array
$ echo "${some_array[2]}" # Get the third element of the array
c
$ echo "${#some_array[#]}" # Get the length of the array
4
If you are using Bash v4 or higher, you can use mapfile to accomplish this:
mapfile -t Unix_Array < hello.txt
Otherwise, this should work:
while read -r line; do
Unix_Array+=("$line")
done < hello.txt
The best way I found is:
declare -a JUPYTER_VENV
JUPYTER_VENV+=( "test1" "test2" "test3" )
And then consume it with:
for jupenv in "${JUPYTER_ENV[#]}"
do
echo "$jupenv"
done
Instead of this:
cat hello.txt | while read line; do
${Unix_Array[${counter}]}=$line;
let counter=counter+1;
echo $counter;
done
You can just do this:
Unix_Array=( `cat "hello.txt" `)
It’s a solution:
count=0
Unix_Array=($(cat hello.txt))
array_size=$(cat hello.txt | wc -l)
for ((count=0; count < array_size; count++))
do
echo ${Unix_Array[$count]}
done
Posted my code below, wondering if I can search one array for a match... or if theres a way I can search a unix file inside of an argument.
#!/bin/bash
# store words in file
cat $1 | ispell -l > file
# move words in file into array
array=($(< file))
# remove temp file
rm file
# move already checked words into array
checked=($(< .spelled))
# print out words & ask for corrections
for ((i=0; i<${#array[#]}; i++ ))
do
if [[ ! ${array[i]} = ${checked[#]} ]]; then
read -p "' ${array[i]} ' is mispelled. Press "Enter" to keep
this spelling, or type a correction here: " input
if [[ ! $input = "" ]]; then
correction[i]=$input
else
echo ${array[i]} >> .spelled
fi
fi
done
echo "MISPELLED: CORRECTIONS:"
for ((i=0; i<${#correction[#]}; i++ ))
do
echo ${array[i]} ${correction[i]}
done
otherwise, i would need to write a for loop to check each array indice, and then somehow make a decision statement whether to go through the loop and print/take input
The ususal shell incantation to do this is:
cat $1 | ispell -l |while read -r ln
do
read -p "$ln is misspelled. Enter correction" corrected
if [ ! x$corrected = x ] ; then
ln=$corrected
fi
echo $ln
done >correctedwords.txt
The while;do;done is kind of like a function and you can pipe data into and out of it.
P.S. I didn't test the above code so there may be syntax errors