So, i am assuming that i will need to use sockets(i am a newbie to C).
The program will be for Windows(in pure C). And i shall be using these examples
http://cs.baylor.edu/~donahoo/practical/CSockets/winsock.html
My question is, instead of the client program connecting via TCP, i want the server to accept connections via a web browser i.e via HTTP.
So if the server program is running you type http://yourip:port/?gettemps and the server responds, but how do i do it?
As you might have guessed, this program will be for monitoring temps, remotely, via a web browser. But not for the CPU, for the GPU using AMD's ADL library(so yeah, only AMD cards).
The simplest option that is supported by most web servers is CGI - Common Gateway Interface.
Microsoft, of cource, has their own way of running web apps - ISAPI.
HTTP is quite a big standard, you might want to use some library such as libcurl to handle the details for you.
If you decide to code it yourself, HTTP is running over TCP so you first need to open a TCP socket at the standard HTTP port 80. Then simply listen on the socket and parse the incoming HTTP data - a great summary is given here: http://www.jmarshall.com/easy/http/.
Web browsers sends http get request to the server via tcp. If you are writing a web server from scratch than, you will need to parse data from web browser. http get request are string like for example GET /images/logo.png HTTP/1.1. So tokenize that string as it comes through tcp and get the command.
As you received your commands to the server call appropriate functions to handle your request.
Here is an great example of simple http server. You might want to make server multi-threaded as you may have multiple simultaneous users.
If you have already set up your web server to run the app on the appropriate port you can use getenv("QUERY_STRING") to access the web equivalent of command line parameters.
It would be better to call your program directly rather than just using the server to access a single default program as your example does, thus you could use http://yourip:port/yourprogram?cmd=gettemps. In this example getenv("QUERY_STRING") would return 'cmd=gettemps'.
Related
I'm trying to create a bridge in C Language that uses two protocols : OPC-UA and MODBUS.
Between the client and the bridge I used the protocol open62541 to ask for some data of any type. When the bridge receive the request, the memory requests start, from the brigde with the protocol MODBUS, to the MODBUS server, that should send back those memory variable asked.
My problem is that I cannot find any way to see the point in the code, where the Server recieve the Client request.
I need to find how to send those memory variables back from the server to the Client.
I would be glad if someone has the solution.
By guessing I assume you mean a ReadRequest and you want to find out where this read request is handled in the server?
It could be this one: Service_Read
https://github.com/open62541/open62541/blob/71e9a44d1aec5bc0cce465c8daefe47883b25f6c/src/server/ua_services_attribute.c#L394
Or also the Operation_Read:
https://github.com/open62541/open62541/blob/71e9a44d1aec5bc0cce465c8daefe47883b25f6c/src/server/ua_services_attribute.c#L394
you are looking for?!
I'm writing a port scanner in C and i want to detect what service is running on an open port and its version.I've already wrote the scanner code but now i have no idea about how to detect running service.
What can i do?
If you are determined to do it in your own code, you can connect to the port, see if you get any data on it, if nothing then send a few bytes, and check again.
Then match that against expected response.
to get an idea what you are looking for, you can connect manually to the port with telnet and poke at it. In many cases (a web server is an easy example) you must send some correctly formatted data in order to get a usable response.
nmap has done all this and much more (e.g. extensive checks such as looking for byte order and timing of arp traffic)
UPDATE: several people have mentioned well known ports, but that won't help you discover standard services running on nonstandard ports, such as ssh or http servers running on custom ports.
If server sends something first, use that to identify protocol.
If not, send something according to some protocol, such as http, and see what server sends back (valid response or error). You may need to make several attempts with different protocols, and a good order is important to minimize connection count.
Some protocols may be very hard to identify, and it is easy to make custom server with unique protocol you don't know about, or even hide real server under simple fake server of other proto such as http.
If you just want to know what the port usually is, check "well known ports" and official reserved ports.
Also check nmap source code.
I m working with libcurl. It's very good (as client) and I used to open a socket to a server and then send my http packets.
I'm wondering if it's possible to develop http server with the libcurl. the http server will listen on a given port then when it receive a http packet then the http server return a need to a digest authentication.
I made some research in stackoverflow and in the curl website but without result.
Is it possible to do that with libcurl ? and how to do it?
To repeat what others have said: no, libcurl is not for servers. It is even said in the curl FAQ:
5.17 Can I write a server with libcurl?
No. libcurl offers no functions or building blocks to build any kind
of internet protocol server. libcurl is only a client-side library.
For server libraries, you need to continue your search elsewhere but
there exist many good open source ones out there for most protocols
you could possibly want a server for. And there are really good
stand-alone ones that have been tested and proven for many years.
There's no need for you to reinvent them!
You need some HTTP server library (since libcurl is only an HTTP client librart) I would suggest to use libonion but there are several other HTTP server frameworks (libmicrohttpd, POCO & Wt in C++, ....).
HTTP is a complex protocol, even if coding a server for a tiny subset (like plain GET requests, without all the useful features like conditional requests, encoding & compression, etc...) of it is reasonably feasible. Hence I recommend using a full-fledged HTTP server library, and that cannot be a tiny library.
Do you know of any HTTP client library in C (with SSL support) that also allows direct communication with the remote server?
I have a client-server application where the client uses HTTP to start a session in the server and then tells the server to switch the connection from HTTP to a different protocol. All communication is encapsulated in SSL. It is written in Perl and works well, but I'm looking into implementing the client in C.
I know libcurl gives you access to the underlaying socket but it's not enough because of the SSL requirement.
Notice that libcurl doesn't do the SSL part by itself, it uses OpenSSL. So, if you can get the socket handle from libcurl after the first HTTP interactions, AND the session key it uses (some spelunking required) you can go on directly with OpenSSL from that point.
I think that you must be looking for this otherwise you must have to write it yourself, like this
Sounds like you want Web Sockets. Don't know if there's a C library available though. I would assume there is, if you dig.
Having looked at several available http server libraries I have not yet found what I am looking for and am sure I can't be the first to have this set of requirements.
I need a library which presents an API which is 'pipelined'. Pipelining is used to describe an HTTP feature where multiple HTTP requests can be sent across a TCP link at a time without waiting for a response. I want a similar feature on the library API where my application can receive all of those request without having to send a response (I will respond but want the ability to process multiple requests at a time to reduce the impact of internal latency).
So the web server library will need to support the following flow
1) HTTP Client transmits http request 1
2) HTTP Client transmits http request 2 ...
3) Web Server Library receives request 1 and passes it to My Web Server App
4) My Web Server App receives request 1 and dispatches it to My System
5) Web Server receives request 2 and passes it to My Web Server App
6) My Web Server App receives request 2 and dispatches it to My System
7) My Web Server App receives response to request 1 from My System and passes it to Web Server
8) Web Server transmits HTTP response 1 to HTTP Client
9) My Web Server App receives response to request 2 from My System and
passes it to Web Server
10) Web Server transmits HTTP response 2 to HTTP Client
Hopefully this illustrates my requirement. There are
two key points to recognise. Responses to the Web Server Library are
asynchronous and there may be several HTTP requests passed to My Web
Server App with responses outstanding.
Additional requirements are
Embeddable into an existing 'C' application
Small footprint; I don't need all the functionality available in Apache etc.
Efficient; will need to support thousands of requests a second
Allows asynchronous responses to requests; their is a small latency to responses and given the required request throughput a synchronous architecture is not going to work for me.
Support persistent TCP connections
Support use with Server-Push Comet connections
Open Source / GPL
support for HTTPS
Portable across linux, windows; preferably more.
I will be very grateful for any recommendation
Best Regards
You could try libmicrohttp.
Use the Onion, Luke. This is lightweight and easy to use HTTP server library in C.
For future reference, that meets your requirement, take a look at libasyncd
I'm one of contributors.
Embeddable into an existing 'C' application
It's written in C.
Small footprint; I don't need all the functionality available in Apache etc.
Very compact.
Efficient; will need to support thousands of requests a second
It's libevent based framework. Can handle more than that.
Allows asynchronous responses to requests;
It's asynchronous. Also support pipelining.
Support persistent TCP connections
Sure, keep-alive.
Support use with Server-Push Comet connections
It's up to how you code your logic.
Open Source / GPL
under BSD license
support for HTTPS
Yes. it supports https with openssl.
Portable across linux, windows; preferably more.
Portable but not windows at this moment but it's portable to windows.
What you want is something that supports HTTP pipelining. You should make yourself familiar with that page if you are not already.
Yes, go for libmicrohttp. It has support for SSL etc and work in both Unix and Windows.
However, Christopher is right on the spot in his comment. If you have a startup time for each response, you are not going to gain much by pipelining. However, if you only have a significant response time to the first request, you may win something.
On the other hand, if each response has a startup time, you may gain a lot by not using pipelining, but create a new request for each object. Then each request can have its own thread, sucking up the startup costs in parallel. All responses will then be sent "at once" in the optimum case. libmicrohttp supports this mode of operation in its MHD_USE_THREAD_PER_CONNECTION thread model.
Following up on previous comments and updates...
You don't say how many concurrent connections you'll have but just "a TCP link".
If it's a single connection, then you'll be using HTTP pipelining as previously mentioned; so you would only need a handful of threads — rather than thousands — to process the requests at the head of the pipeline.
So you wouldn't need to have a thread for every request; just a small pool of workers for each connection.
Have you done any testing or implementation so far to show whether you actually do have problems with response latency for pipelined connections?
If your embedded device is powerful enough to cope with thousands of requests per second, including doing TLS setup, encryption and decryption, I would worry about premature optimisation at this level.
Howard,
Have you taken a look at lighthttpd? It meets all of your requirements except it isn't explicitly an embedded webserver. But it is open source and compiling it in to your application shouldn't be too hard. You can then write a custom plugin to handle your requests.
Can't believe no one has mentioned nginx. I've read large portions of the source-code and it is extremely modular. You could probably get the parts you need working pretty quickly.
uIP or lwip could work for you. I personally use uIP. It's good for a small number of clients and concurrent connections (or as you call it, "pipelining"). However, it's not as scalable or as fast at serving up content as lwip from what I've read. I went with simplicity and small size of uIP instead of the power of lwip, as my app usually only has 1 user.
I've found uIP pretty limited as the concurrent connections increase. However, I'm sure that's a limitation of my MAC receive buffers available and not uIP itself. I think lwip uses significantly more memory in some way to get around this. I just don't have enough ethernet RAM to support a ton of request packets coming in. That said, I can do background ajax polling with about a 15ms latency on a 56mhz processor.
http://www.sics.se/~adam/software.html
I've actually modified uIP in several ways. Adding a DHCP server and supporting multipart POST for file uploads are the big things.) Let me know if you have any questions.