why is array size limited when declared at compile time? - c

for example I can do
int *arr;
arr = (int *)malloc(sizeof(int) * 1048575);
but I cannot do this without the program crashing:
int arr[1048575];
why is this so?

Assuming arr is a local variable, declaring it as an array uses memory from the (relatively limited) stack, while malloc() uses memory from the (comparatively limitless) heap.

If you're allocating these as local variables in functions (which is the only place you could have the pointer declaration immediately followed by a malloc call), then the difference is that malloc will allocate a chunk of memory from the heap and give you its address, while directly doing int arr[1048575]; will attempt to allocate the memory on the stack. The stack has much less space available to it.
The stack is limited in size for two main reasons that I'm aware of:
Traditional imperative programming makes very little use of recursion, so deep recursion (and heavy stack growth) is "probably" a sign of infinite recursion, and hence a bug that's going to kill the process. It's therefore best if it is caught before the process consumes the gigabytes of virtual memory (on a 32 bit architecture) that will cause the process to exhaust its address space (at which point the machine is probably using far more virtual memory than it actually has RAM, and is therefore operating extremely slowly).
Multi-threaded programs need multiple stacks. Therefore, the runtime system needs know that the stack will never grow beyond a certain bound, so it can put another stack after that bound if a new thread is created.

When you declare an array, you are placing it on the stack.
When you call malloc(), the memory is taken from the heap.
The stack is usually more limited compared to the heap, and is usually transient (but it depends on how often you enter and exit the function that this array is declared in.
For such a large (maybe not by today's standards?) memory, it is good practice to malloc it, assuming you want the array to last around for a bit.

Related

When to really use heap memory [duplicate]

What are the stack and heap?
Where are they located physically in a computer's memory?
To what extent are they controlled by the OS or language run-time?
What is their scope?
What determines their sizes?
What makes one faster?
The stack is the memory set aside as scratch space for a thread of execution. When a function is called, a block is reserved on the top of the stack for local variables and some bookkeeping data. When that function returns, the block becomes unused and can be used the next time a function is called. The stack is always reserved in a LIFO (last in first out) order; the most recently reserved block is always the next block to be freed. This makes it really simple to keep track of the stack; freeing a block from the stack is nothing more than adjusting one pointer.
The heap is memory set aside for dynamic allocation. Unlike the stack, there's no enforced pattern to the allocation and deallocation of blocks from the heap; you can allocate a block at any time and free it at any time. This makes it much more complex to keep track of which parts of the heap are allocated or free at any given time; there are many custom heap allocators available to tune heap performance for different usage patterns.
Each thread gets a stack, while there's typically only one heap for the application (although it isn't uncommon to have multiple heaps for different types of allocation).
To answer your questions directly:
To what extent are they controlled by the OS or language runtime?
The OS allocates the stack for each system-level thread when the thread is created. Typically the OS is called by the language runtime to allocate the heap for the application.
What is their scope?
The stack is attached to a thread, so when the thread exits the stack is reclaimed. The heap is typically allocated at application startup by the runtime, and is reclaimed when the application (technically process) exits.
What determines the size of each of them?
The size of the stack is set when a thread is created. The size of the heap is set on application startup, but can grow as space is needed (the allocator requests more memory from the operating system).
What makes one faster?
The stack is faster because the access pattern makes it trivial to allocate and deallocate memory from it (a pointer/integer is simply incremented or decremented), while the heap has much more complex bookkeeping involved in an allocation or deallocation. Also, each byte in the stack tends to be reused very frequently which means it tends to be mapped to the processor's cache, making it very fast. Another performance hit for the heap is that the heap, being mostly a global resource, typically has to be multi-threading safe, i.e. each allocation and deallocation needs to be - typically - synchronized with "all" other heap accesses in the program.
A clear demonstration:
Image source: vikashazrati.wordpress.com
Stack:
Stored in computer RAM just like the heap.
Variables created on the stack will go out of scope and are automatically deallocated.
Much faster to allocate in comparison to variables on the heap.
Implemented with an actual stack data structure.
Stores local data, return addresses, used for parameter passing.
Can have a stack overflow when too much of the stack is used (mostly from infinite or too deep recursion, very large allocations).
Data created on the stack can be used without pointers.
You would use the stack if you know exactly how much data you need to allocate before compile time and it is not too big.
Usually has a maximum size already determined when your program starts.
Heap:
Stored in computer RAM just like the stack.
In C++, variables on the heap must be destroyed manually and never fall out of scope. The data is freed with delete, delete[], or free.
Slower to allocate in comparison to variables on the stack.
Used on demand to allocate a block of data for use by the program.
Can have fragmentation when there are a lot of allocations and deallocations.
In C++ or C, data created on the heap will be pointed to by pointers and allocated with new or malloc respectively.
Can have allocation failures if too big of a buffer is requested to be allocated.
You would use the heap if you don't know exactly how much data you will need at run time or if you need to allocate a lot of data.
Responsible for memory leaks.
Example:
int foo()
{
char *pBuffer; //<--nothing allocated yet (excluding the pointer itself, which is allocated here on the stack).
bool b = true; // Allocated on the stack.
if(b)
{
//Create 500 bytes on the stack
char buffer[500];
//Create 500 bytes on the heap
pBuffer = new char[500];
}//<-- buffer is deallocated here, pBuffer is not
}//<--- oops there's a memory leak, I should have called delete[] pBuffer;
The most important point is that heap and stack are generic terms for ways in which memory can be allocated. They can be implemented in many different ways, and the terms apply to the basic concepts.
In a stack of items, items sit one on top of the other in the order they were placed there, and you can only remove the top one (without toppling the whole thing over).
The simplicity of a stack is that you do not need to maintain a table containing a record of each section of allocated memory; the only state information you need is a single pointer to the end of the stack. To allocate and de-allocate, you just increment and decrement that single pointer. Note: a stack can sometimes be implemented to start at the top of a section of memory and extend downwards rather than growing upwards.
In a heap, there is no particular order to the way items are placed. You can reach in and remove items in any order because there is no clear 'top' item.
Heap allocation requires maintaining a full record of what memory is allocated and what isn't, as well as some overhead maintenance to reduce fragmentation, find contiguous memory segments big enough to fit the requested size, and so on. Memory can be deallocated at any time leaving free space. Sometimes a memory allocator will perform maintenance tasks such as defragmenting memory by moving allocated memory around, or garbage collecting - identifying at runtime when memory is no longer in scope and deallocating it.
These images should do a fairly good job of describing the two ways of allocating and freeing memory in a stack and a heap. Yum!
To what extent are they controlled by the OS or language runtime?
As mentioned, heap and stack are general terms, and can be implemented in many ways. Computer programs typically have a stack called a call stack which stores information relevant to the current function such as a pointer to whichever function it was called from, and any local variables. Because functions call other functions and then return, the stack grows and shrinks to hold information from the functions further down the call stack. A program doesn't really have runtime control over it; it's determined by the programming language, OS and even the system architecture.
A heap is a general term used for any memory that is allocated dynamically and randomly; i.e. out of order. The memory is typically allocated by the OS, with the application calling API functions to do this allocation. There is a fair bit of overhead required in managing dynamically allocated memory, which is usually handled by the runtime code of the programming language or environment used.
What is their scope?
The call stack is such a low level concept that it doesn't relate to 'scope' in the sense of programming. If you disassemble some code you'll see relative pointer style references to portions of the stack, but as far as a higher level language is concerned, the language imposes its own rules of scope. One important aspect of a stack, however, is that once a function returns, anything local to that function is immediately freed from the stack. That works the way you'd expect it to work given how your programming languages work. In a heap, it's also difficult to define. The scope is whatever is exposed by the OS, but your programming language probably adds its rules about what a "scope" is in your application. The processor architecture and the OS use virtual addressing, which the processor translates to physical addresses and there are page faults, etc. They keep track of what pages belong to which applications. You never really need to worry about this, though, because you just use whatever method your programming language uses to allocate and free memory, and check for errors (if the allocation/freeing fails for any reason).
What determines the size of each of them?
Again, it depends on the language, compiler, operating system and architecture. A stack is usually pre-allocated, because by definition it must be contiguous memory. The language compiler or the OS determine its size. You don't store huge chunks of data on the stack, so it'll be big enough that it should never be fully used, except in cases of unwanted endless recursion (hence, "stack overflow") or other unusual programming decisions.
A heap is a general term for anything that can be dynamically allocated. Depending on which way you look at it, it is constantly changing size. In modern processors and operating systems the exact way it works is very abstracted anyway, so you don't normally need to worry much about how it works deep down, except that (in languages where it lets you) you mustn't use memory that you haven't allocated yet or memory that you have freed.
What makes one faster?
The stack is faster because all free memory is always contiguous. No list needs to be maintained of all the segments of free memory, just a single pointer to the current top of the stack. Compilers usually store this pointer in a special, fast register for this purpose. What's more, subsequent operations on a stack are usually concentrated within very nearby areas of memory, which at a very low level is good for optimization by the processor on-die caches.
(I have moved this answer from another question that was more or less a dupe of this one.)
The answer to your question is implementation specific and may vary across compilers and processor architectures. However, here is a simplified explanation.
Both the stack and the heap are memory areas allocated from the underlying operating system (often virtual memory that is mapped to physical memory on demand).
In a multi-threaded environment each thread will have its own completely independent stack but they will share the heap. Concurrent access has to be controlled on the heap and is not possible on the stack.
The heap
The heap contains a linked list of used and free blocks. New allocations on the heap (by new or malloc) are satisfied by creating a suitable block from one of the free blocks. This requires updating the list of blocks on the heap. This meta information about the blocks on the heap is also stored on the heap often in a small area just in front of every block.
As the heap grows new blocks are often allocated from lower addresses towards higher addresses. Thus you can think of the heap as a heap of memory blocks that grows in size as memory is allocated. If the heap is too small for an allocation the size can often be increased by acquiring more memory from the underlying operating system.
Allocating and deallocating many small blocks may leave the heap in a state where there are a lot of small free blocks interspersed between the used blocks. A request to allocate a large block may fail because none of the free blocks are large enough to satisfy the allocation request even though the combined size of the free blocks may be large enough. This is called heap fragmentation.
When a used block that is adjacent to a free block is deallocated the new free block may be merged with the adjacent free block to create a larger free block effectively reducing the fragmentation of the heap.
The stack
The stack often works in close tandem with a special register on the CPU named the stack pointer. Initially the stack pointer points to the top of the stack (the highest address on the stack).
The CPU has special instructions for pushing values onto the stack and popping them off the stack. Each push stores the value at the current location of the stack pointer and decreases the stack pointer. A pop retrieves the value pointed to by the stack pointer and then increases the stack pointer (don't be confused by the fact that adding a value to the stack decreases the stack pointer and removing a value increases it. Remember that the stack grows to the bottom). The values stored and retrieved are the values of the CPU registers.
If a function has parameters, these are pushed onto the stack before the call to the function. The code in the function is then able to navigate up the stack from the current stack pointer to locate these values.
When a function is called the CPU uses special instructions that push the current instruction pointer onto the stack, i.e. the address of the code executing on the stack. The CPU then jumps to the function by setting the instruction pointer to the address of the function called. Later, when the function returns, the old instruction pointer is popped off the stack and execution resumes at the code just after the call to the function.
When a function is entered, the stack pointer is decreased to allocate more space on the stack for local (automatic) variables. If the function has one local 32 bit variable four bytes are set aside on the stack. When the function returns, the stack pointer is moved back to free the allocated area.
Nesting function calls work like a charm. Each new call will allocate function parameters, the return address and space for local variables and these activation records can be stacked for nested calls and will unwind in the correct way when the functions return.
As the stack is a limited block of memory, you can cause a stack overflow by calling too many nested functions and/or allocating too much space for local variables. Often the memory area used for the stack is set up in such a way that writing below the bottom (the lowest address) of the stack will trigger a trap or exception in the CPU. This exceptional condition can then be caught by the runtime and converted into some kind of stack overflow exception.
Can a function be allocated on the heap instead of a stack?
No, activation records for functions (i.e. local or automatic variables) are allocated on the stack that is used not only to store these variables, but also to keep track of nested function calls.
How the heap is managed is really up to the runtime environment. C uses malloc and C++ uses new, but many other languages have garbage collection.
However, the stack is a more low-level feature closely tied to the processor architecture. Growing the heap when there is not enough space isn't too hard since it can be implemented in the library call that handles the heap. However, growing the stack is often impossible as the stack overflow only is discovered when it is too late; and shutting down the thread of execution is the only viable option.
In the following C# code
public void Method1()
{
int i = 4;
int y = 2;
class1 cls1 = new class1();
}
Here's how the memory is managed
Local Variables that only need to last as long as the function invocation go in the stack. The heap is used for variables whose lifetime we don't really know up front but we expect them to last a while. In most languages it's critical that we know at compile time how large a variable is if we want to store it on the stack.
Objects (which vary in size as we update them) go on the heap because we don't know at creation time how long they are going to last. In many languages the heap is garbage collected to find objects (such as the cls1 object) that no longer have any references.
In Java, most objects go directly into the heap. In languages like C / C++, structs and classes can often remain on the stack when you're not dealing with pointers.
More information can be found here:
The difference between stack and heap memory allocation « timmurphy.org
and here:
Creating Objects on the Stack and Heap
This article is the source of picture above: Six important .NET concepts: Stack, heap, value types, reference types, boxing, and unboxing - CodeProject
but be aware it may contain some inaccuracies.
Other answers just avoid explaining what static allocation means. So I will explain the three main forms of allocation and how they usually relate to the heap, stack, and data segment below. I also will show some examples in both C/C++ and Python to help people understand.
"Static" (AKA statically allocated) variables are not allocated on the stack. Do not assume so - many people do only because "static" sounds a lot like "stack". They actually exist in neither the stack nor the heap. They are part of what's called the data segment.
However, it is generally better to consider "scope" and "lifetime" rather than "stack" and "heap".
Scope refers to what parts of the code can access a variable. Generally we think of local scope (can only be accessed by the current function) versus global scope (can be accessed anywhere) although scope can get much more complex.
Lifetime refers to when a variable is allocated and deallocated during program execution. Usually we think of static allocation (variable will persist through the entire duration of the program, making it useful for storing the same information across several function calls) versus automatic allocation (variable only persists during a single call to a function, making it useful for storing information that is only used during your function and can be discarded once you are done) versus dynamic allocation (variables whose duration is defined at runtime, instead of compile time like static or automatic).
Although most compilers and interpreters implement this behavior similarly in terms of using stacks, heaps, etc, a compiler may sometimes break these conventions if it wants as long as behavior is correct. For instance, due to optimization a local variable may only exist in a register or be removed entirely, even though most local variables exist in the stack. As has been pointed out in a few comments, you are free to implement a compiler that doesn't even use a stack or a heap, but instead some other storage mechanisms (rarely done, since stacks and heaps are great for this).
I will provide some simple annotated C code to illustrate all of this. The best way to learn is to run a program under a debugger and watch the behavior. If you prefer to read python, skip to the end of the answer :)
// Statically allocated in the data segment when the program/DLL is first loaded
// Deallocated when the program/DLL exits
// scope - can be accessed from anywhere in the code
int someGlobalVariable;
// Statically allocated in the data segment when the program is first loaded
// Deallocated when the program/DLL exits
// scope - can be accessed from anywhere in this particular code file
static int someStaticVariable;
// "someArgument" is allocated on the stack each time MyFunction is called
// "someArgument" is deallocated when MyFunction returns
// scope - can be accessed only within MyFunction()
void MyFunction(int someArgument) {
// Statically allocated in the data segment when the program is first loaded
// Deallocated when the program/DLL exits
// scope - can be accessed only within MyFunction()
static int someLocalStaticVariable;
// Allocated on the stack each time MyFunction is called
// Deallocated when MyFunction returns
// scope - can be accessed only within MyFunction()
int someLocalVariable;
// A *pointer* is allocated on the stack each time MyFunction is called
// This pointer is deallocated when MyFunction returns
// scope - the pointer can be accessed only within MyFunction()
int* someDynamicVariable;
// This line causes space for an integer to be allocated in the heap
// when this line is executed. Note this is not at the beginning of
// the call to MyFunction(), like the automatic variables
// scope - only code within MyFunction() can access this space
// *through this particular variable*.
// However, if you pass the address somewhere else, that code
// can access it too
someDynamicVariable = new int;
// This line deallocates the space for the integer in the heap.
// If we did not write it, the memory would be "leaked".
// Note a fundamental difference between the stack and heap
// the heap must be managed. The stack is managed for us.
delete someDynamicVariable;
// In other cases, instead of deallocating this heap space you
// might store the address somewhere more permanent to use later.
// Some languages even take care of deallocation for you... but
// always it needs to be taken care of at runtime by some mechanism.
// When the function returns, someArgument, someLocalVariable
// and the pointer someDynamicVariable are deallocated.
// The space pointed to by someDynamicVariable was already
// deallocated prior to returning.
return;
}
// Note that someGlobalVariable, someStaticVariable and
// someLocalStaticVariable continue to exist, and are not
// deallocated until the program exits.
A particularly poignant example of why it's important to distinguish between lifetime and scope is that a variable can have local scope but static lifetime - for instance, "someLocalStaticVariable" in the code sample above. Such variables can make our common but informal naming habits very confusing. For instance when we say "local" we usually mean "locally scoped automatically allocated variable" and when we say global we usually mean "globally scoped statically allocated variable". Unfortunately when it comes to things like "file scoped statically allocated variables" many people just say... "huh???".
Some of the syntax choices in C/C++ exacerbate this problem - for instance many people think global variables are not "static" because of the syntax shown below.
int var1; // Has global scope and static allocation
static int var2; // Has file scope and static allocation
int main() {return 0;}
Note that putting the keyword "static" in the declaration above prevents var2 from having global scope. Nevertheless, the global var1 has static allocation. This is not intuitive! For this reason, I try to never use the word "static" when describing scope, and instead say something like "file" or "file limited" scope. However many people use the phrase "static" or "static scope" to describe a variable that can only be accessed from one code file. In the context of lifetime, "static" always means the variable is allocated at program start and deallocated when program exits.
Some people think of these concepts as C/C++ specific. They are not. For instance, the Python sample below illustrates all three types of allocation (there are some subtle differences possible in interpreted languages that I won't get into here).
from datetime import datetime
class Animal:
_FavoriteFood = 'Undefined' # _FavoriteFood is statically allocated
def PetAnimal(self):
curTime = datetime.time(datetime.now()) # curTime is automatically allocatedion
print("Thank you for petting me. But it's " + str(curTime) + ", you should feed me. My favorite food is " + self._FavoriteFood)
class Cat(Animal):
_FavoriteFood = 'tuna' # Note since we override, Cat class has its own statically allocated _FavoriteFood variable, different from Animal's
class Dog(Animal):
_FavoriteFood = 'steak' # Likewise, the Dog class gets its own static variable. Important to note - this one static variable is shared among all instances of Dog, hence it is not dynamic!
if __name__ == "__main__":
whiskers = Cat() # Dynamically allocated
fido = Dog() # Dynamically allocated
rinTinTin = Dog() # Dynamically allocated
whiskers.PetAnimal()
fido.PetAnimal()
rinTinTin.PetAnimal()
Dog._FavoriteFood = 'milkbones'
whiskers.PetAnimal()
fido.PetAnimal()
rinTinTin.PetAnimal()
# Output is:
# Thank you for petting me. But it's 13:05:02.255000, you should feed me. My favorite food is tuna
# Thank you for petting me. But it's 13:05:02.255000, you should feed me. My favorite food is steak
# Thank you for petting me. But it's 13:05:02.255000, you should feed me. My favorite food is steak
# Thank you for petting me. But it's 13:05:02.255000, you should feed me. My favorite food is tuna
# Thank you for petting me. But it's 13:05:02.255000, you should feed me. My favorite food is milkbones
# Thank you for petting me. But it's 13:05:02.256000, you should feed me. My favorite food is milkbones
The Stack
When you call a function the arguments to that function plus some other overhead is put on the stack. Some info (such as where to go on return) is also stored there.
When you declare a variable inside your function, that variable is also allocated on the stack.
Deallocating the stack is pretty simple because you always deallocate in the reverse order in which you allocate. Stack stuff is added as you enter functions, the corresponding data is removed as you exit them. This means that you tend to stay within a small region of the stack unless you call lots of functions that call lots of other functions (or create a recursive solution).
The Heap
The heap is a generic name for where you put the data that you create on the fly. If you don't know how many spaceships your program is going to create, you are likely to use the new (or malloc or equivalent) operator to create each spaceship. This allocation is going to stick around for a while, so it is likely we will free things in a different order than we created them.
Thus, the heap is far more complex, because there end up being regions of memory that are unused interleaved with chunks that are - memory gets fragmented. Finding free memory of the size you need is a difficult problem. This is why the heap should be avoided (though it is still often used).
Implementation
Implementation of both the stack and heap is usually down to the runtime / OS. Often games and other applications that are performance critical create their own memory solutions that grab a large chunk of memory from the heap and then dish it out internally to avoid relying on the OS for memory.
This is only practical if your memory usage is quite different from the norm - i.e for games where you load a level in one huge operation and can chuck the whole lot away in another huge operation.
Physical location in memory
This is less relevant than you think because of a technology called Virtual Memory which makes your program think that you have access to a certain address where the physical data is somewhere else (even on the hard disc!). The addresses you get for the stack are in increasing order as your call tree gets deeper. The addresses for the heap are un-predictable (i.e implimentation specific) and frankly not important.
Others have answered the broad strokes pretty well, so I'll throw in a few details.
Stack and heap need not be singular. A common situation in which you have more than one stack is if you have more than one thread in a process. In this case each thread has its own stack. You can also have more than one heap, for example some DLL configurations can result in different DLLs allocating from different heaps, which is why it's generally a bad idea to release memory allocated by a different library.
In C you can get the benefit of variable length allocation through the use of alloca, which allocates on the stack, as opposed to alloc, which allocates on the heap. This memory won't survive your return statement, but it's useful for a scratch buffer.
Making a huge temporary buffer on Windows that you don't use much of is not free. This is because the compiler will generate a stack probe loop that is called every time your function is entered to make sure the stack exists (because Windows uses a single guard page at the end of your stack to detect when it needs to grow the stack. If you access memory more than one page off the end of the stack you will crash). Example:
void myfunction()
{
char big[10000000];
// Do something that only uses for first 1K of big 99% of the time.
}
Others have directly answered your question, but when trying to understand the stack and the heap, I think it is helpful to consider the memory layout of a traditional UNIX process (without threads and mmap()-based allocators). The Memory Management Glossary web page has a diagram of this memory layout.
The stack and heap are traditionally located at opposite ends of the process's virtual address space. The stack grows automatically when accessed, up to a size set by the kernel (which can be adjusted with setrlimit(RLIMIT_STACK, ...)). The heap grows when the memory allocator invokes the brk() or sbrk() system call, mapping more pages of physical memory into the process's virtual address space.
In systems without virtual memory, such as some embedded systems, the same basic layout often applies, except the stack and heap are fixed in size. However, in other embedded systems (such as those based on Microchip PIC microcontrollers), the program stack is a separate block of memory that is not addressable by data movement instructions, and can only be modified or read indirectly through program flow instructions (call, return, etc.). Other architectures, such as Intel Itanium processors, have multiple stacks. In this sense, the stack is an element of the CPU architecture.
What is a stack?
A stack is a pile of objects, typically one that is neatly arranged.
Stacks in computing architectures are regions of memory where data is added or removed in a last-in-first-out manner.
In a multi-threaded application, each thread will have its own stack.
What is a heap?
A heap is an untidy collection of things piled up haphazardly.
In computing architectures the heap is an area of dynamically-allocated memory that is managed automatically by the operating system or the memory manager library.
Memory on the heap is allocated, deallocated, and resized regularly during program execution, and this can lead to a problem called fragmentation.
Fragmentation occurs when memory objects are allocated with small spaces in between that are too small to hold additional memory objects.
The net result is a percentage of the heap space that is not usable for further memory allocations.
Both together
In a multi-threaded application, each thread will have its own stack. But, all the different threads will share the heap.
Because the different threads share the heap in a multi-threaded application, this also means that there has to be some coordination between the threads so that they don’t try to access and manipulate the same piece(s) of memory in the heap at the same time.
Which is faster – the stack or the heap? And why?
The stack is much faster than the heap.
This is because of the way that memory is allocated on the stack.
Allocating memory on the stack is as simple as moving the stack pointer up.
For people new to programming, it’s probably a good idea to use the stack since it’s easier.
Because the stack is small, you would want to use it when you know exactly how much memory you will need for your data, or if you know the size of your data is very small.
It’s better to use the heap when you know that you will need a lot of memory for your data, or you just are not sure how much memory you will need (like with a dynamic array).
Java Memory Model
The stack is the area of memory where local variables (including method parameters) are stored. When it comes to object variables, these are merely references (pointers) to the actual objects on the heap.
Every time an object is instantiated, a chunk of heap memory is set aside to hold the data (state) of that object. Since objects can contain other objects, some of this data can in fact hold references to those nested objects.
The stack is a portion of memory that can be manipulated via several key assembly language instructions, such as 'pop' (remove and return a value from the stack) and 'push' (push a value to the stack), but also call (call a subroutine - this pushes the address to return to the stack) and return (return from a subroutine - this pops the address off of the stack and jumps to it). It's the region of memory below the stack pointer register, which can be set as needed. The stack is also used for passing arguments to subroutines, and also for preserving the values in registers before calling subroutines.
The heap is a portion of memory that is given to an application by the operating system, typically through a syscall like malloc. On modern OSes this memory is a set of pages that only the calling process has access to.
The size of the stack is determined at runtime, and generally does not grow after the program launches. In a C program, the stack needs to be large enough to hold every variable declared within each function. The heap will grow dynamically as needed, but the OS is ultimately making the call (it will often grow the heap by more than the value requested by malloc, so that at least some future mallocs won't need to go back to the kernel to get more memory. This behavior is often customizable)
Because you've allocated the stack before launching the program, you never need to malloc before you can use the stack, so that's a slight advantage there. In practice, it's very hard to predict what will be fast and what will be slow in modern operating systems that have virtual memory subsystems, because how the pages are implemented and where they are stored is an implementation detail.
I think many other people have given you mostly correct answers on this matter.
One detail that has been missed, however, is that the "heap" should in fact probably be called the "free store". The reason for this distinction is that the original free store was implemented with a data structure known as a "binomial heap." For that reason, allocating from early implementations of malloc()/free() was allocation from a heap. However, in this modern day, most free stores are implemented with very elaborate data structures that are not binomial heaps.
You can do some interesting things with the stack. For instance, you have functions like alloca (assuming you can get past the copious warnings concerning its use), which is a form of malloc that specifically uses the stack, not the heap, for memory.
That said, stack-based memory errors are some of the worst I've experienced. If you use heap memory, and you overstep the bounds of your allocated block, you have a decent chance of triggering a segment fault. (Not 100%: your block may be incidentally contiguous with another that you have previously allocated.) But since variables created on the stack are always contiguous with each other, writing out of bounds can change the value of another variable. I have learned that whenever I feel that my program has stopped obeying the laws of logic, it is probably buffer overflow.
Simply, the stack is where local variables get created. Also, every time you call a subroutine the program counter (pointer to the next machine instruction) and any important registers, and sometimes the parameters get pushed on the stack. Then any local variables inside the subroutine are pushed onto the stack (and used from there). When the subroutine finishes, that stuff all gets popped back off the stack. The PC and register data gets and put back where it was as it is popped, so your program can go on its merry way.
The heap is the area of memory dynamic memory allocations are made out of (explicit "new" or "allocate" calls). It is a special data structure that can keep track of blocks of memory of varying sizes and their allocation status.
In "classic" systems RAM was laid out such that the stack pointer started out at the bottom of memory, the heap pointer started out at the top, and they grew towards each other. If they overlap, you are out of RAM. That doesn't work with modern multi-threaded OSes though. Every thread has to have its own stack, and those can get created dynamicly.
From WikiAnwser.
Stack
When a function or a method calls another function which in turns calls another function, etc., the execution of all those functions remains suspended until the very last function returns its value.
This chain of suspended function calls is the stack, because elements in the stack (function calls) depend on each other.
The stack is important to consider in exception handling and thread executions.
Heap
The heap is simply the memory used by programs to store variables.
Element of the heap (variables) have no dependencies with each other and can always be accessed randomly at any time.
Stack
Very fast access
Don't have to explicitly de-allocate variables
Space is managed efficiently by CPU, memory will not become fragmented
Local variables only
Limit on stack size (OS-dependent)
Variables cannot be resized
Heap
Variables can be accessed globally
No limit on memory size
(Relatively) slower access
No guaranteed efficient use of space, memory may become fragmented over time as blocks of memory are allocated, then freed
You must manage memory (you're in charge of allocating and freeing variables)
Variables can be resized using realloc()
In Short
A stack is used for static memory allocation and a heap for dynamic memory allocation, both stored in the computer's RAM.
In Detail
The Stack
The stack is a "LIFO" (last in, first out) data structure, that is managed and optimized by the CPU quite closely. Every time a function declares a new variable, it is "pushed" onto the stack. Then every time a function exits, all of the variables pushed onto the stack by that function, are freed (that is to say, they are deleted). Once a stack variable is freed, that region of memory becomes available for other stack variables.
The advantage of using the stack to store variables, is that memory is managed for you. You don't have to allocate memory by hand, or free it once you don't need it any more. What's more, because the CPU organizes stack memory so efficiently, reading from and writing to stack variables is very fast.
More can be found here.
The Heap
The heap is a region of your computer's memory that is not managed automatically for you, and is not as tightly managed by the CPU. It is a more free-floating region of memory (and is larger). To allocate memory on the heap, you must use malloc() or calloc(), which are built-in C functions. Once you have allocated memory on the heap, you are responsible for using free() to deallocate that memory once you don't need it any more.
If you fail to do this, your program will have what is known as a memory leak. That is, memory on the heap will still be set aside (and won't be available to other processes). As we will see in the debugging section, there is a tool called Valgrind that can help you detect memory leaks.
Unlike the stack, the heap does not have size restrictions on variable size (apart from the obvious physical limitations of your computer). Heap memory is slightly slower to be read from and written to, because one has to use pointers to access memory on the heap. We will talk about pointers shortly.
Unlike the stack, variables created on the heap are accessible by any function, anywhere in your program. Heap variables are essentially global in scope.
More can be found here.
Variables allocated on the stack are stored directly to the memory and access to this memory is very fast, and its allocation is dealt with when the program is compiled. When a function or a method calls another function which in turns calls another function, etc., the execution of all those functions remains suspended until the very last function returns its value. The stack is always reserved in a LIFO order, the most recently reserved block is always the next block to be freed. This makes it really simple to keep track of the stack, freeing a block from the stack is nothing more than adjusting one pointer.
Variables allocated on the heap have their memory allocated at run time and accessing this memory is a bit slower, but the heap size is only limited by the size of virtual memory. Elements of the heap have no dependencies with each other and can always be accessed randomly at any time. You can allocate a block at any time and free it at any time. This makes it much more complex to keep track of which parts of the heap are allocated or free at any given time.
You can use the stack if you know exactly how much data you need to allocate before compile time, and it is not too big. You can use the heap if you don't know exactly how much data you will need at runtime or if you need to allocate a lot of data.
In a multi-threaded situation each thread will have its own completely independent stack, but they will share the heap. The stack is thread specific and the heap is application specific. The stack is important to consider in exception handling and thread executions.
Each thread gets a stack, while there's typically only one heap for the application (although it isn't uncommon to have multiple heaps for different types of allocation).
At run-time, if the application needs more heap, it can allocate memory from free memory and if the stack needs memory, it can allocate memory from free memory allocated memory for the application.
Even, more detail is given here and here.
Now come to your question's answers.
To what extent are they controlled by the OS or language runtime?
The OS allocates the stack for each system-level thread when the thread is created. Typically the OS is called by the language runtime to allocate the heap for the application.
More can be found here.
What is their scope?
Already given in top.
"You can use the stack if you know exactly how much data you need to allocate before compile time, and it is not too big. You can use the heap if you don't know exactly how much data you will need at runtime or if you need to allocate a lot of data."
More can be found in here.
What determines the size of each of them?
The size of the stack is set by OS when a thread is created. The size of the heap is set on application startup, but it can grow as space is needed (the allocator requests more memory from the operating system).
What makes one faster?
Stack allocation is much faster since all it really does is move the stack pointer. Using memory pools, you can get comparable performance out of heap allocation, but that comes with a slight added complexity and its own headaches.
Also, stack vs. heap is not only a performance consideration; it also tells you a lot about the expected lifetime of objects.
Details can be found from here.
OK, simply and in short words, they mean ordered and not ordered...!
Stack: In stack items, things get on the top of each-other, means gonna be faster and more efficient to be processed!...
So there is always an index to point the specific item, also processing gonna be faster, there is relationship between the items as well!...
Heap: No order, processing gonna be slower and values are messed up together with no specific order or index... there are random and there is no relationship between them... so execution and usage time could be vary...
I also create the image below to show how they may look like:
stack, heap and data of each process in virtual memory:
In the 1980s, UNIX propagated like bunnies with big companies rolling their own.
Exxon had one as did dozens of brand names lost to history.
How memory was laid out was at the discretion of the many implementors.
A typical C program was laid out flat in memory with
an opportunity to increase by changing the brk() value.
Typically, the HEAP was just below this brk value
and increasing brk increased the amount of available heap.
The single STACK was typically an area below HEAP which was a tract of memory
containing nothing of value until the top of the next fixed block of memory.
This next block was often CODE which could be overwritten by stack data
in one of the famous hacks of its era.
One typical memory block was BSS (a block of zero values)
which was accidentally not zeroed in one manufacturer's offering.
Another was DATA containing initialized values, including strings and numbers.
A third was CODE containing CRT (C runtime), main, functions, and libraries.
The advent of virtual memory in UNIX changes many of the constraints.
There is no objective reason why these blocks need be contiguous,
or fixed in size, or ordered a particular way now.
Of course, before UNIX was Multics which didn't suffer from these constraints.
Here is a schematic showing one of the memory layouts of that era.
A couple of cents: I think, it will be good to draw memory graphical and more simple:
Arrows - show where grow stack and heap, process stack size have limit, defined in OS, thread stack size limits by parameters in thread create API usually. Heap usually limiting by process maximum virtual memory size, for 32 bit 2-4 GB for example.
So simple way: process heap is general for process and all threads inside, using for memory allocation in common case with something like malloc().
Stack is quick memory for store in common case function return pointers and variables, processed as parameters in function call, local function variables.
Since some answers went nitpicking, I'm going to contribute my mite.
Surprisingly, no one has mentioned that multiple (i.e. not related to the number of running OS-level threads) call stacks are to be found not only in exotic languages (PostScript) or platforms (Intel Itanium), but also in fibers, green threads and some implementations of coroutines.
Fibers, green threads and coroutines are in many ways similar, which leads to much confusion. The difference between fibers and green threads is that the former use cooperative multitasking, while the latter may feature either cooperative or preemptive one (or even both). For the distinction between fibers and coroutines, see here.
In any case, the purpose of both fibers, green threads and coroutines is having multiple functions executing concurrently, but not in parallel (see this SO question for the distinction) within a single OS-level thread, transferring control back and forth from one another in an organized fashion.
When using fibers, green threads or coroutines, you usually have a separate stack per function. (Technically, not just a stack but a whole context of execution is per function. Most importantly, CPU registers.) For every thread there're as many stacks as there're concurrently running functions, and the thread is switching between executing each function according to the logic of your program. When a function runs to its end, its stack is destroyed. So, the number and lifetimes of stacks are dynamic and are not determined by the number of OS-level threads!
Note that I said "usually have a separate stack per function". There're both stackful and stackless implementations of couroutines. Most notable stackful C++ implementations are Boost.Coroutine and Microsoft PPL's async/await. (However, C++'s resumable functions (a.k.a. "async and await"), which were proposed to C++17, are likely to use stackless coroutines.)
Fibers proposal to the C++ standard library is forthcoming. Also, there're some third-party libraries. Green threads are extremely popular in languages like Python and Ruby.
I have something to share, although the major points are already covered.
Stack
Very fast access.
Stored in RAM.
Function calls are loaded here along with the local variables and function parameters passed.
Space is freed automatically when program goes out of a scope.
Stored in sequential memory.
Heap
Slow access comparatively to Stack.
Stored in RAM.
Dynamically created variables are stored here, which later requires freeing the allocated memory after use.
Stored wherever memory allocation is done, accessed by pointer always.
Interesting note:
Should the function calls had been stored in heap, it would had resulted in 2 messy points:
Due to sequential storage in stack, execution is faster. Storage in heap would have resulted in huge time consumption thus making the whole program execute slower.
If functions were stored in heap (messy storage pointed by pointer), there would have been no way to return to the caller address back (which stack gives due to sequential storage in memory).
Wow! So many answers and I don't think one of them got it right...
1) Where and what are they (physically in a real computer's memory)?
The stack is memory that begins as the highest memory address allocated to your program image, and it then decrease in value from there. It is reserved for called function parameters and for all temporary variables used in functions.
There are two heaps: public and private.
The private heap begins on a 16-byte boundary (for 64-bit programs) or a 8-byte boundary (for 32-bit programs) after the last byte of code in your program, and then increases in value from there. It is also called the default heap.
If the private heap gets too large it will overlap the stack area, as will the stack overlap the heap if it gets too big. Because the stack starts at a higher address and works its way down to lower address, with proper hacking you can get make the stack so large that it will overrun the private heap area and overlap the code area. The trick then is to overlap enough of the code area that you can hook into the code. It's a little tricky to do and you risk a program crash, but it's easy and very effective.
The public heap resides in it's own memory space outside of your program image space. It is this memory that will be siphoned off onto the hard disk if memory resources get scarce.
2) To what extent are they controlled by the OS or language runtime?
The stack is controlled by the programmer, the private heap is managed by the OS, and the public heap is not controlled by anyone because it is an OS service -- you make requests and either they are granted or denied.
2b) What is their scope?
They are all global to the program, but their contents can be private, public, or global.
2c) What determines the size of each of them?
The size of the stack and the private heap are determined by your compiler runtime options. The public heap is initialized at runtime using a size parameter.
2d) What makes one faster?
They are not designed to be fast, they are designed to be useful. How the programmer utilizes them determines whether they are "fast" or "slow"
REF:
https://norasandler.com/2019/02/18/Write-a-Compiler-10.html
https://learn.microsoft.com/en-us/windows/desktop/api/heapapi/nf-heapapi-getprocessheap
https://learn.microsoft.com/en-us/windows/desktop/api/heapapi/nf-heapapi-heapcreate
A lot of answers are correct as concepts, but we must note that a stack is needed by the hardware (i.e. microprocessor) to allow calling subroutines (CALL in assembly language..). (OOP guys will call it methods)
On the stack you save return addresses and call → push / ret → pop is managed directly in hardware.
You can use the stack to pass parameters.. even if it is slower than using registers (would a microprocessor guru say or a good 1980s BIOS book...)
Without stack no microprocessor can work. (we can't imagine a program, even in assembly language, without subroutines/functions)
Without the heap it can. (An assembly language program can work without, as the heap is a OS concept, as malloc, that is a OS/Lib call.
Stack usage is faster as:
Is hardware, and even push/pop are very efficient.
malloc requires entering kernel mode, use lock/semaphore (or other synchronization primitives) executing some code and manage some structures needed to keep track of allocation.
Where and what are they (physically in a real computer's memory)?
ANSWER: Both are in RAM.
ASIDE:
RAM is like a desk and HDDs/SSDs (permanent storage) are like bookshelves. To read anything, you must have a book open on your desk, and you can only have as many books open as fit on your desk. To get a book, you pull it from your bookshelf and open it on your desk. To return a book, you close the book on your desk and return it to its bookshelf.
Stack and heap are names we give to two ways compilers store different kinds of data in the same place (i.e. in RAM).
What is their scope?
What determines the size of each of them?
What makes one faster?
ANSWER:
The stack is for static (fixed size) data
a. At compile time, the compiler reads the variable types used in your code.
i. It allocates a fixed amount of memory for these variables.
ii. This size of this memory cannot grow.
b. The memory is contiguous (a single block), so access is sometimes faster than the heap
c. An object placed on the stack that grows in memory during runtime beyond the size of the stack causes a stack overflow error
The heap is for dynamic (changing size) data
a. The amount of memory is limited only by the amount of empty space available in RAM
i. The amount used can grow or shrink as needed at runtime
b. Since items are allocated on the heap by finding empty space wherever it exists in RAM, data is not always in a contiguous section, which sometimes makes access slower than the stack
c. Programmers manually put items on the heap with the new keyword and MUST manually deallocate this memory when they are finished using it.
i. Code that repeatedly allocates new memory without deallocating it when it is no longer needed leads to a memory leak.
ASIDE:
The stack and heap were not primarily introduced to improve speed; they were introduced to handle memory overflow. The first concern regarding use of the stack vs. the heap should be whether memory overflow will occur. If an object is intended to grow in size to an unknown amount (like a linked list or an object whose members can hold an arbitrary amount of data), place it on the heap. As far as possible, use the C++ standard library (STL) containers vector, map, and list as they are memory and speed efficient and added to make your life easier (you don't need to worry about memory allocation/deallocation).
After getting your code to run, if you find it is running unacceptably slow, then go back and refactor your code and see if it can be programmed more efficiently. It may turn out the problem has nothing to do with the stack or heap directly at all (e.g. use an iterative algorithm instead of a recursive one, look at I/O vs. CPU-bound tasks, perhaps add multithreading or multiprocessing).
I say sometimes slower/faster above because the speed of the program might not have anything to do with items being allocated on the stack or heap.
To what extent are they controlled by the OS or language run-time?
ANSWER:
The stack size is determined at compile time by the compiler.
The heap size varies during runtime. (The heap works with the OS during runtime to allocate memory.)
ASIDE:
Below is a little more about control and compile-time vs. runtime operations.
Each computer has a unique instruction set architecture (ISA), which are its hardware commands (e.g. "MOVE", "JUMP", "ADD", etc.).
An OS is nothing more than a resource manager (controls how/when/ and where to use memory, processors, devices, and information).
The ISA of the OS is called the bare machine and the remaining commands are called the extended machine. The kernel is the first layer of the extended machine. It controls things like
determining what tasks get to use a processor (the scheduler),
how much memory or how many hardware registers to allocate to a task (the dispatcher), and
the order in which tasks should be performed (the traffic controller).
When we say "compiler", we generally mean the compiler, assembler, and linker together
The compiler turns source code into assembly language and passes it to the assembler,
The assembler turns the assembly language into machine code (ISA commands), and passes it to the linker
The linker takes all machine code (possibly generated from multiple source files) and combines it into one program.
The machine code gets passed to the kernel when executed, which determines when it should run and take control, but the machine code itself contains ISA commands for requesting files, requesting memory, etc. So the code issues ISA commands, but everything has to pass by the kernel.
The stack is essentially an easy-to-access memory that simply manages its items
as a - well - stack. Only items for which the size is known in advance can go onto the stack. This is the case for numbers, strings, booleans.
The heap is a memory for items of which you can’t predetermine the
exact size and structure. Since objects and arrays can be mutated and
change at runtime, they have to go into the heap.
Source: Academind
I feel most answers are very convoluted and technical, while I didn't find one that could explain simply the reasoning behind those two concepts (i.e. why people created them in the first place?) and why you should care. Here is my attempt at one:
Data on the Stack is temporary and auto-cleaning
Data on the Heap is permanent until manually deleted
That's it.
 
 
Still, for more explanations :
The stack is meant to be used as the ephemeral or working memory, a memory space that we know will be entirely deleted regularly no matter what mess we put in there during the lifetime of our program. That's like the memo on your desk that you scribble on with anything going through your mind that you barely feel may be important, which you know you will just throw away at the end of the day because you will have filtered and organized the actual important notes in another medium, like a document or a book. We don't care for presentation, crossing-outs or unintelligible text, this is just for our work of the day and will remember what we meant an hour or two ago, it's just our quick and dirty way to store ideas we want to remember later without hurting our current stream of thoughts. That's what people mean by "the stack is the scratchpad".
The heap however is the long-term memory, the actual important document that will we stored, consulted and depended on for a very long time after its creation. It consequently needs to have perfect form and strictly contain the important data. That why it costs a lot to make and can't be used for the use-case of our precedent memo. It wouldn't be worthwhile, or even simply useless, to take all my notes in an academic paper presentation, writing the text as calligraphy. However this presentation is extremely useful for well curated data. That's what the heap is meant to be. Well known data, important for the lifetime application, which is well controlled and needed at many places in your code. The system will thus never delete this precious data without you explicitly asking for it, because it knows "that's where the important data is!".
This is why you need to manage and take care of memory allocation on the heap, but don't need to bother with it for the stack.
Most top answers are merely technical details of the actual implementations of that concept in real computers.
So what to take away from this is that:
Unimportant, working, temporary, data just needed to make our functions and objects work is (generally) more relevant to be stored on the stack.
Important, permanent and foundational application data is (generally) more relevant to be stored on the heap.
This of course needs to be thought of only in the context of the lifetime of your program. Actual humanly important data generated by your program will need to be stored on an external file evidently. (Since whether it is the heap or the stack, they are both cleared entirely when your program terminates.)
PS: Those are just general rules, you can always find edge cases and each language comes with its own implementation and resulting quirks, this is meant to be taken as a guidance to the concept and a rule of thumb.
CPU stack and heap are physically related to how CPU and registers works with memory, how machine-assembly language works, not high-level languages themselves, even if these languages can decide little things.
All modern CPUs work with the "same" microprocessor theory: they are all based on what's called "registers" and some are for "stack" to gain performance. All CPUs have stack registers since the beginning and they had been always here, way of talking, as I know. Assembly languages are the same since the beginning, despite variations... up to Microsoft and its Intermediate Language (IL) that changed the paradigm to have a OO virtual machine assembly language. So we'll be able to have some CLI/CIL CPU in the future (one project of MS).
CPUs have stack registers to speed up memories access, but they are limited compared to the use of others registers to get full access to all the available memory for the processus. It why we talked about stack and heap allocations.
In summary, and in general, the heap is hudge and slow and is for "global" instances and objects content, as the stack is little and fast and for "local" variables and references (hidden pointers to forget to manage them).
So when we use the new keyword in a method, the reference (an int) is created in the stack, but the object and all its content (value-types as well as objects) is created in the heap, if I remember. But local elementary value-types and arrays are created in the stack.
The difference in memory access is at the cells referencing level: addressing the heap, the overall memory of the process, requires more complexity in terms of handling CPU registers, than the stack which is "more" locally in terms of addressing because the CPU stack register is used as base address, if I remember.
It is why when we have very long or infinite recurse calls or loops, we got stack overflow quickly, without freezing the system on modern computers...
C# Heap(ing) Vs Stack(ing) In .NET
Stack vs Heap: Know the Difference
Static class memory allocation where it is stored C#
What and where are the stack and heap?
https://en.wikipedia.org/wiki/Memory_management
https://en.wikipedia.org/wiki/Stack_register
Assembly language resources:
Assembly Programming Tutorial
Intel® 64 and IA-32 Architectures Software Developer Manuals
When a process is created then after loading code and data OS setup heap start just after data ends and stack to top of address space based on architecture
When more heap is required OS will allocate dynamically and heap chunk is always virtually contiguous
Please see brk(), sbrk() and alloca() system call in linux

Growing an array on the stack

This is my problem in essence. In the life of a function, I generate some integers, then use the array of integers in an algorithm that is also part of the same function. The array of integers will only be used within the function, so naturally it makes sense to store the array on the stack.
The problem is I don't know the size of the array until I'm finished generating all the integers.
I know how to allocate a fixed size and variable sized array on the stack. However, I do not know how to grow an array on the stack, and that seems like the best way to solve my problem. I'm fairly certain this is possible to do in assembly, you just increment stack pointer and store an int for each int generated, so the array of ints would be at the end of the stack frame. Is this possible to do in C though?
I would disagree with your assertion that "so naturally it makes sense to store the array on the stack". Stack memory is really designed for when you know the size at compile time. I would argue that dynamic memory is the way to go here
C doesn't define what the "stack" is. It only has static, automatic and dynamic allocations. Static and automatic allocations are handled by the compiler, and only dynamic allocation puts the controls in your hands. Thus, if you want to manually deallocate an object and allocate a bigger one, you must use dynamic allocation.
Don't use dynamic arrays on the stack (compare Why is the use of alloca() not considered good practice?), better allocate memory from the heap using malloc and resize it using realloc.
Never Use alloca()
IMHO this point hasn't been made well enough in the standard references.
One rule of thumb is:
If you're not prepared to statically allocate the maximum possible size as a
fixed length C array then you shouldn't do it dynamically with alloca() either.
Why? The reason you're trying to avoid malloc() is performance.
alloca() will be slower and won't work in any circumstance static allocation will fail. It's generally less likely to succeed than malloc() too.
One thing is sure. Statically allocating the maximum will outdo both malloc() and alloca().
Static allocation is typically damn near a no-op. Most systems will advance the stack pointer for the function call anyway. There's no appreciable difference for how far.
So what you're telling me is you care about performance but want to hold back on a no-op solution? Think about why you feel like that.
The overwhelming likelihood is you're concerned about the size allocated.
But as explained it's free and it gets taken back. What's the worry?
If the worry is "I don't have a maximum or don't know if it will overflow the stack" then you shouldn't be using alloca() because you don't have a maximum and know it if it will overflow the stack.
If you do have a maximum and know it isn't going to blow the stack then statically allocate the maximum and go home. It's a free lunch - remember?
That makes alloca() either wrong or sub-optimal.
Every time you use alloca() you're either wasting your time or coding in one of the difficult-to-test-for arbitrary scaling ceilings that sleep quietly until things really matter then f**k up someone's day.
Don't.
PS: If you need a big 'workspace' but the malloc()/free() overhead is a bottle-neck for example called repeatedly in a big loop, then consider allocating the workspace outside the loop and carrying it from iteration to iteration. You may need to reallocate the workspace if you find a 'big' case but it's often possible to divide the number of allocations by 100 or even 1000.
Footnote:
There must be some theoretical algorithm where a() calls b() and if a() requires a massive environment b() doesn't and vice versa.
In that event there could be some kind of freaky play-off where the stack overflow is prevented by alloca(). I have never heard of or seen such an algorithm. Plausible specimens will be gratefully received!
The innards of the C compiler requires stack sizes to be fixed or calculable at compile time. It's been a while since I used C (now a C++ convert) and I don't know exactly why this is. http://gribblelab.org/CBootcamp/7_Memory_Stack_vs_Heap.html provides a useful comparison of the pros and cons of the two approaches.
I appreciate your assembly code analogy but C is largely managed, if that makes any sense, by the Operating System, which imposes/provides the task, process and stack notations.
In order to address your issue dynamic memory allocation looks ideal.
int *a = malloc(sizeof(int));
and dereference it to store the value .
Each time a new integer needs to be added to the existing list of integers
int *temp = realloc(a,sizeof(int) * (n+1)); /* n = number of new elements */
if(temp != NULL)
a = temp;
Once done using this memory free() it.
Is there an upper limit on the size? If you can impose one, so the size is at most a few tens of KiB, then yes alloca is appropriate (especially if this is a leaf function, not one calling other functions that might also allocate non-tiny arrays this way).
Or since this is C, not C++, use a variable-length array like int foo[n];.
But always sanity-check your size, otherwise it's a stack-clash vulnerability waiting to happen. (Where a huge allocation moves the stack pointer so far that it ends up in the middle of another memory region, where other things get overwritten by local variables and return addresses.) Some distros enable hardening options that make GCC generate code to touch every page in between when moving the stack pointer by more than a page.
It's usually not worth it to check the size and use alloc for small, malloc for large, since you also need another check at the end of your function to call free if the size was large. It might give a speedup, but this makes your code more complicated and more likely to get broken during maintenance if future editors don't notice that the memory is only sometimes malloced. So only consider a dual strategy if profiling shows this is actually important, and you care about performance more than simplicity / human-readability / maintainability for this particular project.
A size check for an upper limit (else log an error and exit) is more reasonable, but then you have to choose an upper limit beyond which your program will intentionally bail out, even though there's plenty of RAM you're choosing not to use. If there is a reasonable limit where you can be pretty sure something's gone wrong, like the input being intentionally malicious from an exploit, then great, if(size>limit) error(); int arr[size];.
If neither of those conditions can be satisfied, your use case is not appropriate for C automatic storage (stack memory) because it might need to be large. Just use dynamic allocation autom don't want malloc.
Windows x86/x64 the default user-space stack size is 1MiB, I think. On x86-64 Linux it's 8MiB. (ulimit -s). Thread stacks are allocated with the same size. But remember, your function will be part of a chain of function calls (so if every function used a large fraction of the total size, you'd have a problem if they called each other). And any stack memory you dirty won't get handed back to the OS even after the function returns, unlike malloc/free where a large allocation can give back the memory instead of leaving it on the free list.
Kernel thread stack are much smaller, like 16 KiB total for x86-64 Linux, so you never want VLAs or alloca in kernel code, except maybe for a tiny max size, like up to 16 or maybe 32 bytes, not large compared to the size of a pointer that would be needed to store a kmalloc return value.

C: When to use stack allocated array and when to use heap allocated array

I've been told not to use stack allocated arrays because the stack is a precious resource.
Other people have suggested to me that in fact it is perfectly fine to use stack allocated arrays so long as the array is relatively small.
I would like to have a general rule of thumb: when should I use a stack allocated array?
And when should I use a heap allocated array?
While all of your memory is limited, even today with enormous amounts of RAM and virtual memory, there is still a limit. However, it's rather large, especially compared with the stack which can be anything from a couple of kb on small embedded systems to a couple of megabytes on a PC.
Besides that, there is also the question about how you are using it, and for what. For example, if you want to return an "array" from a function, it should never be on the stack.
In general, I would say that try to keep arrays on the stack small if you can. If you are creating an array with thousands of entries on the stack you should stop and think about what you want it for.
It depends on your platform.
Nowadays, if working on the popular x64 platform, you don't really have to worry about it.
Depending on the Operating System you use, you can check how much stack space and how much heap space a userland process is allowed to use.
For example, UNIX-like systems have soft and hard limits. Some you can crank up, some you can not.
Bottom line is that you don't usually need to worry about such things. And when you need to know, you are usually tied so closely to the platform you'll be developing for that you know all these details.
Hope I answered your question. If you want specific values please specify your exact hardware, operating system and user privileges.
The answer to this question is context dependent. When you write for an operating system kernel, for example, the stack might be quite limited, and allocating more than a thousand bytes in a stack frame could cause a problem.
In modern consumer systems, the space available for the stack is typically quite large. One problem systems used to have was that address space was limited and, once the stack was assigned an address, it could not grow any further than the next object in the address space in the direction of stack growth, regardless of the availability of physical memory or of virtual memory elsewhere in the address space. This is less of a problem with today’s address spaces.
Commonly, megabytes of space can be allocated in a stack frame, and doing so is cheap and easy. However, if many routines that allocate large amounts of space are called, or one or a few routines that allocate large amounts of space are called recursively, then problems can occur because too much space is used, running into some limit (such as address space or physical memory).
Of course, running into a physical memory limit will not be alleviated by allocating space from the heap. So only the issue of consuming the address space available for the stack is relevant to the question of whether to use stack or heap.
A simple test for whether this is a problem is to insert use of a great deal of stack space in your main routine. If you use additional stack space and your application still functions under a load that uses large amounts of stack space normally, then, when you remove this artificial reservation in main, you will have plenty of margin.
A better way would be to calculate the maximum your program could use and compare that to the stack space available from the system. But that is rarely easy with today’s software.
If you are running into stack space limits, your linker or your operating system may have options to make more available.
Scope of Global and static variables will be through out the life of a process. Memory for these variable will be allocated when a process is started and it will be freed only process exits.
But local variable(stack variable) has scope only to a function on which it is defined. Memory will be allocated when a function is invoked and it will be freed once control exits from the function.
Main intention of dynamic memory is to create a variable of user defined scope. If you want to control a scope of variable means, you can allocate memory for a variable x at one function and then pass the reference(address) to as many function you want and then finally you can free it.
So with the help of dynamic allocated memory, we can create a variable which has scope higher than a local variable and lesser than global or static variable.
Apart from this if the size is very very high its better to go for dynamic memroy, if the architecture contains memory constraint.
The good reason to use heap allocated memory is passing its ownership to some other function/struct. From the other hand, stack gives you memory management for free, you can not forget to deallocate memory from stack, while there is risk of leak if you use heap.
If you create an array just for local usage, the criteria of size of the one to use, however it is hard to give exact size, above which memory should be allocated on heap. One could say that a few hundreds bytes is enough to move to heap, for some others it will be less or more than that.

Arrays of which size require malloc (or global assignment)?

While taking my first steps with C, I quickly noticed that int array[big number] causes my programs to crash when called inside a function. Not quite as quickly, I discovered that I can prevent this from happening by defining the array with global scope (outside the functions) or using malloc.
My question is:
Starting at which size is it necessary to use one of the above methods to make sure my programs won't crash?
I mean, is it safe to use just, e.g., int i; for counters and int chars[256]; for small arrays or should I just use malloc for all local variables?
You should understand what the difference is between int chars[256] in a function and using malloc().
In short, the former places the entire array on the stack. The latter allocates the memory you requested from the heap. Generally speaking, the heap is much larger than the stack, but the size of each can be adjusted.
Another key difference is that a variable allocated on the stack will technically be gone after you return from the method. (Oh, your program may function as though it's not gone for a bit if you continue to access that array, but ho ho ho danger lurks.) A hunk of memory allocated with malloc will remain allocated until you explicitly free it or the program exits.
You should use malloc for your dynamic memory allocation. For statically sized arrays (or any other object) within functions, if the memory required is to big you will quickly get a segmentation fault. I don't think a 'safe limit' can be defined, its probably implementation specific and other factors come in play too, like the current stack and objects within it created by callers to the current function. I would be tempted to say that anything below the page size (usually 4kb) should be safe as long as there is no recursion involved, but I do not think there are such guarantees.
It depends. If you have some guarantee that a line will never be longer than 100 ... 1000 characters you can get away with a fixed size buffer. If you don't: you don't. There is a difference between reading in a neat x KB config file and a x GB XML file (with no CR/LF). It depends.
The next choice is: do you want your program to die gracefully? It is only a design choice.

Why would you ever want to allocate memory on the heap rather than the stack? [duplicate]

This question already has answers here:
Closed 13 years ago.
Possible Duplicate:
When is it best to use a Stack instead of a Heap and vice versa?
I've read a few of the other questions regarding the heap vs stack, but they seem to focus more on what the heap/stack do rather than why you would use them.
It seems to me that stack allocation would almost always be preferred since it is quicker (just moving the stack pointer vs looking for free space in the heap), and you don't have to manually free allocated memory when you're done using it. The only reason I can see for using heap allocation is if you wanted to create an object in a function and then use it outside that functions scope, since stack allocated memory is automatically unallocated after returning from the function.
Are there other reasons for using heap allocation instead of stack allocation that I am not aware of?
There are a few reasons:
The main one is that with heap allocation, you have the most flexible control over the object's lifetime (from malloc/calloc to free);
Stack space is typically a more limited resource than heap space, at least in default configurations;
A failure to allocate heap space can be handled gracefully, whereas running out of stack space is often unrecoverable.
Without the flexible object lifetime, useful data structures such as binary trees and linked lists would be virtually impossible to write.
You want an allocation to live beyond a function invocation
You want to conserve stack space (which is typically limited to a few MBs)
You're working with re-locatable memory (Win16, databases, etc.), or want to recover from allocation failures.
Variable length anything. You can fake around this, but your code will be really nasty.
The big one is #1. As soon as you get into any sort of concurrency or IPC #1 is everywhere. Even most non-trivial single threaded applications are tricky to devise without some heap allocation. That'd practically be faking a functional language in C/C++.
So I want to make a string. I can make it on the heap or on the stack. Let's try both:
char *heap = malloc(14);
if(heap == NULL)
{
// bad things happened!
}
strcat(heap, "Hello, world!");
And for the stack:
char stack[] = "Hello, world!";
So now I have these two strings in their respective places. Later, I want to make them longer:
char *tmp = realloc(heap, 20);
if(tmp == NULL)
{
// bad things happened!
}
heap = tmp;
memmove(heap + 13, heap + 7);
memcpy(heap + 7, "cruel ", 6);
And for the stack:
// umm... What?
This is only one benefit, and others have mentioned other benefits, but this is a rather nice one. With the heap, we can at least try to make our allocated space larger. With the stack, we're stuck with what we have. If we want room to grow, we have to declare it all up front, and we all know how it stinks to see this:
char username[MAX_BUF_SIZE];
The most obvious rationale for using the heap is when you call a function and need something of unknown length returned. Sometimes the caller may pass a memory block and size to the function, but at other times this is just impractical, especially if the returned stuff is complex (e.g. a collection of different objects with pointers flying around, etc.).
Size limits are a huge dealbreaker in a lot of cases. The stack is usually measured in the low megabytes or even kilobytes (that's for everything on the stack), whereas all modern PCs allow you a few gigabytes of heap. So if you're going to be using a large amount of data, you absolutely need the heap.
just to add
you can use alloca to allocate memory on the stack, but again memory on the stack is limited and also the space exists only during the function execution only.
that does not mean everything should be allocated on the heap. like all design decisions this is also somewhat difficult, a "judicious" combination of both should be used.
Besides manual control of object's lifetime (which you mentioned), the other reasons for using heap would include:
Run-time control over object's size (both initial size and it's "later" size, during the program's execution).
For example, you can allocate an array of certain size, which is only known at run time.
With the introduction of VLA (Variable Length Arrays) in C99, it became possible to allocate arrays of fixed run-time size without using heap (this is basically a language-level implementation of 'alloca' functionality). However, in other cases you'd still need heap even in C99.
Run-time control over the total number of objects.
For example, when you build a binary tree stucture, you can't meaningfully allocate the nodes of the tree on the stack in advance. You have to use heap to allocated them "on demand".
Low-level technical considerations, as limited stack space (others already mentioned that).
When you need a large, say, I/O buffer, even for a short time (inside a single function) it makes more sense to request it from the heap instead of declaring a large automatic array.
Stack variables (often called 'automatic variables') is best used for things you want to always be the same, and always be small.
int x;
char foo[32];
Are all stack allocations, These are fixed at compile time too.
The best reason for heap allocation is that you cant always know how much space you need. You often only know this once the program is running. You might have an idea of limits but you would only want to use the exact amount of space required.
If you had to read in a file that could be anything from 1k to 50mb, you would not do this:-
int readdata ( FILE * f ) {
char inputdata[50*1024*1025];
...
return x;
}
That would try to allocate 50mb on the stack, which would usually fail as the stack is usually limited to 256k anyway.
The stack and heap share the same "open" memory space and will have to eventually come to a point where they meet, if you use the entire segment of memory. Keeping the balance between the space that each of them use will have amortized cost later for allocation and de-allocation of memory a smaller asymptotic value.

Resources