I have a file like this below:
-bash-4.2$ cat a1.txt
0 10.95.187.87 5444 up 0.333333 primary 0 false 0
1 10.95.187.88 5444 up 0.333333 standby 1 true 0
2 10.95.187.89 5444 up 0.333333 standby 0 false 0
I want to fetch the data from the above file into a 2D array.
Can you please help me with a suitable way to put into an array.
Also post putting we need put a condition to check whether the value in the 4th column is UP or DOWN. If it's UP then OK, if its down then below command needs to be executed.
-bash-4.2$ pcp_attach_node -w -U pcpuser -h localhost -p 9898 0
(The value at the end is getting fetched from the 1st column.
You could try something like that:
while read -r line; do
declare -a array=( $line ) # use IFS
echo "${array[0]}"
echo "${array[1]}" # and so on
if [[ "$array[3]" ]]; then
echo execute command...
fi
done < a1.txt
Or:
while read -r -a array; do
if [[ "$array[3]" ]]; then
echo execute command...
fi
done < a1.txt
This works only if field are space separated (any kind of space).
You could probably mix that with regexp if you need more precise control of the format.
Firstly, I don't think you can have 2D arrays in bash. But you can however store lines into a 1-D array.
Here is a script ,parse1a.sh, to demonstrate emulation of 2D arrays for the type of data you included:
#!/bin/bash
function get_element () {
line=${ARRAY[$1]}
echo $line | awk "{print \$$(($2+1))}" #+1 since awk is one-based
}
function set_element () {
line=${ARRAY[$1]}
declare -a SUBARRAY=($line)
SUBARRAY[$(($2))]=$3
ARRAY[$1]="${SUBARRAY[#]}"
}
ARRAY=()
while IFS='' read -r line || [[ -n "$line" ]]; do
#echo $line
ARRAY+=("$line")
done < "$1"
echo "Full array contents printout:"
printf "%s\n" "${ARRAY[#]}" # Full array contents printout.
for line in "${ARRAY[#]}"; do
#echo $line
if [ "$(echo $line | awk '{print $4}')" == "down" ]; then
echo "Replace this with what to do for down"
else
echo "...and any action for up - if required"
fi
done
echo "Element access of [2,3]:"
echo "get_element 2 3 : "
get_element 2 3
echo "set_element 2 3 left: "
set_element 2 3 left
echo "get_element 2 3 : "
get_element 2 3
echo "Full array contents printout:"
printf "%s\n" "${ARRAY[#]}" # Full array contents printout.
It can be executed by:
./parsea1 a1.txt
Hope this is close to what you are looking for. Note that this code will loose all indenting spaces during manipulation, but a formatted update of the lines could solve that.
I need to remove an element from an array in bash shell.
Generally I'd simply do:
array=("${(#)array:#<element to remove>}")
Unfortunately the element I want to remove is a variable so I can't use the previous command.
Down here an example:
array+=(pluto)
array+=(pippo)
delete=(pluto)
array( ${array[#]/$delete} ) -> but clearly doesn't work because of {}
Any idea?
The following works as you would like in bash and zsh:
$ array=(pluto pippo)
$ delete=pluto
$ echo ${array[#]/$delete}
pippo
$ array=( "${array[#]/$delete}" ) #Quotes when working with strings
If need to delete more than one element:
...
$ delete=(pluto pippo)
for del in ${delete[#]}
do
array=("${array[#]/$del}") #Quotes when working with strings
done
Caveat
This technique actually removes prefixes matching $delete from the elements, not necessarily whole elements.
Update
To really remove an exact item, you need to walk through the array, comparing the target to each element, and using unset to delete an exact match.
array=(pluto pippo bob)
delete=(pippo)
for target in "${delete[#]}"; do
for i in "${!array[#]}"; do
if [[ ${array[i]} = $target ]]; then
unset 'array[i]'
fi
done
done
Note that if you do this, and one or more elements is removed, the indices will no longer be a continuous sequence of integers.
$ declare -p array
declare -a array=([0]="pluto" [2]="bob")
The simple fact is, arrays were not designed for use as mutable data structures. They are primarily used for storing lists of items in a single variable without needing to waste a character as a delimiter (e.g., to store a list of strings which can contain whitespace).
If gaps are a problem, then you need to rebuild the array to fill the gaps:
for i in "${!array[#]}"; do
new_array+=( "${array[i]}" )
done
array=("${new_array[#]}")
unset new_array
You could build up a new array without the undesired element, then assign it back to the old array. This works in bash:
array=(pluto pippo)
new_array=()
for value in "${array[#]}"
do
[[ $value != pluto ]] && new_array+=($value)
done
array=("${new_array[#]}")
unset new_array
This yields:
echo "${array[#]}"
pippo
This is the most direct way to unset a value if you know it's position.
$ array=(one two three)
$ echo ${#array[#]}
3
$ unset 'array[1]'
$ echo ${array[#]}
one three
$ echo ${#array[#]}
2
This answer is specific to the case of deleting multiple values from large arrays, where performance is important.
The most voted solutions are (1) pattern substitution on an array, or (2) iterating over the array elements. The first is fast, but can only deal with elements that have distinct prefix, the second has O(n*k), n=array size, k=elements to remove. Associative array are relative new feature, and might not have been common when the question was originally posted.
For the exact match case, with large n and k, possible to improve performance from O(nk) to O(n+klog(k)). In practice, O(n) assuming k much lower than n. Most of the speed up is based on using associative array to identify items to be removed.
Performance (n-array size, k-values to delete). Performance measure seconds of user time
N K New(seconds) Current(seconds) Speedup
1000 10 0.005 0.033 6X
10000 10 0.070 0.348 5X
10000 20 0.070 0.656 9X
10000 1 0.043 0.050 -7%
As expected, the current solution is linear to N*K, and the fast solution is practically linear to K, with much lower constant. The fast solution is slightly slower vs the current solution when k=1, due to additional setup.
The 'Fast' solution: array=list of input, delete=list of values to remove.
declare -A delk
for del in "${delete[#]}" ; do delk[$del]=1 ; done
# Tag items to remove, based on
for k in "${!array[#]}" ; do
[ "${delk[${array[$k]}]-}" ] && unset 'array[k]'
done
# Compaction
array=("${array[#]}")
Benchmarked against current solution, from the most-voted answer.
for target in "${delete[#]}"; do
for i in "${!array[#]}"; do
if [[ ${array[i]} = $target ]]; then
unset 'array[i]'
fi
done
done
array=("${array[#]}")
Here's a one-line solution with mapfile:
$ mapfile -d $'\0' -t arr < <(printf '%s\0' "${arr[#]}" | grep -Pzv "<regexp>")
Example:
$ arr=("Adam" "Bob" "Claire"$'\n'"Smith" "David" "Eve" "Fred")
$ echo "Size: ${#arr[*]} Contents: ${arr[*]}"
Size: 6 Contents: Adam Bob Claire
Smith David Eve Fred
$ mapfile -d $'\0' -t arr < <(printf '%s\0' "${arr[#]}" | grep -Pzv "^Claire\nSmith$")
$ echo "Size: ${#arr[*]} Contents: ${arr[*]}"
Size: 5 Contents: Adam Bob David Eve Fred
This method allows for great flexibility by modifying/exchanging the grep command and doesn't leave any empty strings in the array.
Partial answer only
To delete the first item in the array
unset 'array[0]'
To delete the last item in the array
unset 'array[-1]'
To expand on the above answers, the following can be used to remove multiple elements from an array, without partial matching:
ARRAY=(one two onetwo three four threefour "one six")
TO_REMOVE=(one four)
TEMP_ARRAY=()
for pkg in "${ARRAY[#]}"; do
for remove in "${TO_REMOVE[#]}"; do
KEEP=true
if [[ ${pkg} == ${remove} ]]; then
KEEP=false
break
fi
done
if ${KEEP}; then
TEMP_ARRAY+=(${pkg})
fi
done
ARRAY=("${TEMP_ARRAY[#]}")
unset TEMP_ARRAY
This will result in an array containing:
(two onetwo three threefour "one six")
Here's a (probably very bash-specific) little function involving bash variable indirection and unset; it's a general solution that does not involve text substitution or discarding empty elements and has no problems with quoting/whitespace etc.
delete_ary_elmt() {
local word=$1 # the element to search for & delete
local aryref="$2[#]" # a necessary step since '${!$2[#]}' is a syntax error
local arycopy=("${!aryref}") # create a copy of the input array
local status=1
for (( i = ${#arycopy[#]} - 1; i >= 0; i-- )); do # iterate over indices backwards
elmt=${arycopy[$i]}
[[ $elmt == $word ]] && unset "$2[$i]" && status=0 # unset matching elmts in orig. ary
done
return $status # return 0 if something was deleted; 1 if not
}
array=(a 0 0 b 0 0 0 c 0 d e 0 0 0)
delete_ary_elmt 0 array
for e in "${array[#]}"; do
echo "$e"
done
# prints "a" "b" "c" "d" in lines
Use it like delete_ary_elmt ELEMENT ARRAYNAME without any $ sigil. Switch the == $word for == $word* for prefix matches; use ${elmt,,} == ${word,,} for case-insensitive matches; etc., whatever bash [[ supports.
It works by determining the indices of the input array and iterating over them backwards (so deleting elements doesn't screw up iteration order). To get the indices you need to access the input array by name, which can be done via bash variable indirection x=1; varname=x; echo ${!varname} # prints "1".
You can't access arrays by name like aryname=a; echo "${$aryname[#]}, this gives you an error. You can't do aryname=a; echo "${!aryname[#]}", this gives you the indices of the variable aryname (although it is not an array). What DOES work is aryref="a[#]"; echo "${!aryref}", which will print the elements of the array a, preserving shell-word quoting and whitespace exactly like echo "${a[#]}". But this only works for printing the elements of an array, not for printing its length or indices (aryref="!a[#]" or aryref="#a[#]" or "${!!aryref}" or "${#!aryref}", they all fail).
So I copy the original array by its name via bash indirection and get the indices from the copy. To iterate over the indices in reverse I use a C-style for loop. I could also do it by accessing the indices via ${!arycopy[#]} and reversing them with tac, which is a cat that turns around the input line order.
A function solution without variable indirection would probably have to involve eval, which may or may not be safe to use in that situation (I can't tell).
Using unset
To remove an element at particular index, we can use unset and then do copy to another array. Only just unset is not required in this case. Because unset does not remove the element it just sets null string to the particular index in array.
declare -a arr=('aa' 'bb' 'cc' 'dd' 'ee')
unset 'arr[1]'
declare -a arr2=()
i=0
for element in "${arr[#]}"
do
arr2[$i]=$element
((++i))
done
echo "${arr[#]}"
echo "1st val is ${arr[1]}, 2nd val is ${arr[2]}"
echo "${arr2[#]}"
echo "1st val is ${arr2[1]}, 2nd val is ${arr2[2]}"
Output is
aa cc dd ee
1st val is , 2nd val is cc
aa cc dd ee
1st val is cc, 2nd val is dd
Using :<idx>
We can remove some set of elements using :<idx> also. For example if we want to remove 1st element we can use :1 as mentioned below.
declare -a arr=('aa' 'bb' 'cc' 'dd' 'ee')
arr2=("${arr[#]:1}")
echo "${arr2[#]}"
echo "1st val is ${arr2[1]}, 2nd val is ${arr2[2]}"
Output is
bb cc dd ee
1st val is cc, 2nd val is dd
http://wiki.bash-hackers.org/syntax/pe#substring_removal
${PARAMETER#PATTERN} # remove from beginning
${PARAMETER##PATTERN} # remove from the beginning, greedy match
${PARAMETER%PATTERN} # remove from the end
${PARAMETER%%PATTERN} # remove from the end, greedy match
In order to do a full remove element, you have to do an unset command with an if statement. If you don't care about removing prefixes from other variables or about supporting whitespace in the array, then you can just drop the quotes and forget about for loops.
See example below for a few different ways to clean up an array.
options=("foo" "bar" "foo" "foobar" "foo bar" "bars" "bar")
# remove bar from the start of each element
options=("${options[#]/#"bar"}")
# options=("foo" "" "foo" "foobar" "foo bar" "s" "")
# remove the complete string "foo" in a for loop
count=${#options[#]}
for ((i = 0; i < count; i++)); do
if [ "${options[i]}" = "foo" ] ; then
unset 'options[i]'
fi
done
# options=( "" "foobar" "foo bar" "s" "")
# remove empty options
# note the count variable can't be recalculated easily on a sparse array
for ((i = 0; i < count; i++)); do
# echo "Element $i: '${options[i]}'"
if [ -z "${options[i]}" ] ; then
unset 'options[i]'
fi
done
# options=("foobar" "foo bar" "s")
# list them with select
echo "Choose an option:"
PS3='Option? '
select i in "${options[#]}" Quit
do
case $i in
Quit) break ;;
*) echo "You selected \"$i\"" ;;
esac
done
Output
Choose an option:
1) foobar
2) foo bar
3) s
4) Quit
Option?
Hope that helps.
There is also this syntax, e.g. if you want to delete the 2nd element :
array=("${array[#]:0:1}" "${array[#]:2}")
which is in fact the concatenation of 2 tabs. The first from the index 0 to the index 1 (exclusive) and the 2nd from the index 2 to the end.
POSIX shell script does not have arrays.
So most probably you are using a specific dialect such as bash, korn shells or zsh.
Therefore, your question as of now cannot be answered.
Maybe this works for you:
unset array[$delete]
What I do is:
array="$(echo $array | tr ' ' '\n' | sed "/itemtodelete/d")"
BAM, that item is removed.
This is a quick-and-dirty solution that will work in simple cases but will break if (a) there are regex special characters in $delete, or (b) there are any spaces at all in any items. Starting with:
array+=(pluto)
array+=(pippo)
delete=(pluto)
Delete all entries exactly matching $delete:
array=(`echo $array | fmt -1 | grep -v "^${delete}$" | fmt -999999`)
resulting in
echo $array -> pippo, and making sure it's an array:
echo $array[1] -> pippo
fmt is a little obscure: fmt -1 wraps at the first column (to put each item on its own line. That's where the problem arises with items in spaces.) fmt -999999 unwraps it back to one line, putting back the spaces between items. There are other ways to do that, such as xargs.
Addendum: If you want to delete just the first match, use sed, as described here:
array=(`echo $array | fmt -1 | sed "0,/^${delete}$/{//d;}" | fmt -999999`)
Actually, I just noticed that the shell syntax somewhat has a behavior built-in that allows for easy reconstruction of the array when, as posed in the question, an item should be removed.
# let's set up an array of items to consume:
x=()
for (( i=0; i<10; i++ )); do
x+=("$i")
done
# here, we consume that array:
while (( ${#x[#]} )); do
i=$(( $RANDOM % ${#x[#]} ))
echo "${x[i]} / ${x[#]}"
x=("${x[#]:0:i}" "${x[#]:i+1}")
done
Notice how we constructed the array using bash's x+=() syntax?
You could actually add more than one item with that, the content of a whole other array at once.
In ZSH this is dead easy (note this uses more bash compatible syntax than necessary where possible for ease of understanding):
# I always include an edge case to make sure each element
# is not being word split.
start=(one two three 'four 4' five)
work=(${(#)start})
idx=2
val=${work[idx]}
# How to remove a single element easily.
# Also works for associative arrays (at least in zsh)
work[$idx]=()
echo "Array size went down by one: "
[[ $#work -eq $(($#start - 1)) ]] && echo "OK"
echo "Array item "$val" is now gone: "
[[ -z ${work[(r)$val]} ]] && echo OK
echo "Array contents are as expected: "
wanted=("${start[#]:0:1}" "${start[#]:2}")
[[ "${(j.:.)wanted[#]}" == "${(j.:.)work[#]}" ]] && echo "OK"
echo "-- array contents: start --"
print -l -r -- "-- $#start elements" ${(#)start}
echo "-- array contents: work --"
print -l -r -- "-- $#work elements" "${work[#]}"
Results:
Array size went down by one:
OK
Array item two is now gone:
OK
Array contents are as expected:
OK
-- array contents: start --
-- 5 elements
one
two
three
four 4
five
-- array contents: work --
-- 4 elements
one
three
four 4
five
To avoid conflicts with array index using unset - see https://stackoverflow.com/a/49626928/3223785 and https://stackoverflow.com/a/47798640/3223785 for more information - reassign the array to itself: ARRAY_VAR=(${ARRAY_VAR[#]}).
#!/bin/bash
ARRAY_VAR=(0 1 2 3 4 5 6 7 8 9)
unset ARRAY_VAR[5]
unset ARRAY_VAR[4]
ARRAY_VAR=(${ARRAY_VAR[#]})
echo ${ARRAY_VAR[#]}
A_LENGTH=${#ARRAY_VAR[*]}
for (( i=0; i<=$(( $A_LENGTH -1 )); i++ )) ; do
echo ""
echo "INDEX - $i"
echo "VALUE - ${ARRAY_VAR[$i]}"
done
exit 0
[Ref.: https://tecadmin.net/working-with-array-bash-script/ ]
How about something like:
array=(one two three)
array_t=" ${array[#]} "
delete=one
array=(${array_t// $delete / })
unset array_t
#/bin/bash
echo "# define array with six elements"
arr=(zero one two three 'four 4' five)
echo "# unset by index: 0"
unset -v 'arr[0]'
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
arr_delete_by_content() { # value to delete
for i in ${!arr[*]}; do
[ "${arr[$i]}" = "$1" ] && unset -v 'arr[$i]'
done
}
echo "# unset in global variable where value: three"
arr_delete_by_content three
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
echo "# rearrange indices"
arr=( "${arr[#]}" )
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
delete_value() { # value arrayelements..., returns array decl.
local e val=$1; new=(); shift
for e in "${#}"; do [ "$val" != "$e" ] && new+=("$e"); done
declare -p new|sed 's,^[^=]*=,,'
}
echo "# new array without value: two"
declare -a arr="$(delete_value two "${arr[#]}")"
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
delete_values() { # arraydecl values..., returns array decl. (keeps indices)
declare -a arr="$1"; local i v; shift
for v in "${#}"; do
for i in ${!arr[*]}; do
[ "$v" = "${arr[$i]}" ] && unset -v 'arr[$i]'
done
done
declare -p arr|sed 's,^[^=]*=,,'
}
echo "# new array without values: one five (keep indices)"
declare -a arr="$(delete_values "$(declare -p arr|sed 's,^[^=]*=,,')" one five)"
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
# new array without multiple values and rearranged indices is left to the reader
I am trying to read a file line by line and find the average of the numbers in each line. I am getting the error: expr: non-numeric argument
I have narrowed the problem down to sum=expr $sum + $i, but I'm not sure why the code doesn't work.
while read -a rows
do
for i in "${rows[#]}"
do
sum=`expr $sum + $i`
total=`expr $total + 1`
done
average=`expr $sum / $total`
done < $fileName
The file looks like this (the numbers are separated by tabs):
1 1 1 1 1
9 3 4 5 5
6 7 8 9 7
3 6 8 9 1
3 4 2 1 4
6 4 4 7 7
With some minor corrections, your code runs well:
while read -a rows
do
total=0
sum=0
for i in "${rows[#]}"
do
sum=`expr $sum + $i`
total=`expr $total + 1`
done
average=`expr $sum / $total`
echo $average
done <filename
With the sample input file, the output produced is:
1
5
7
5
2
5
Note that the answers are what they are because expr only does integer arithmetic.
Using sed to preprocess for expr
The above code could be rewritten as:
$ while read row; do expr '(' $(sed 's/ */ + /g' <<<"$row") ')' / $(wc -w<<<$row); done < filename
1
5
7
5
2
5
Using bash's builtin arithmetic capability
expr is archaic. In modern bash:
while read -a rows
do
total=0
sum=0
for i in "${rows[#]}"
do
((sum += $i))
((total++))
done
echo $((sum/total))
done <filename
Using awk for floating point math
Because awk does floating point math, it can provide more accurate results:
$ awk '{s=0; for (i=1;i<=NF;i++)s+=$i; print s/NF;}' filename
1
5.2
7.4
5.4
2.8
5.6
Some variations on the same trick of using the IFS variable.
#!/bin/bash
while read line; do
set -- $line
echo $(( ( $(IFS=+; echo "$*") ) / $# ))
done < rows
echo
while read -a line; do
echo $(( ( $(IFS=+; echo "${line[*]}") ) / ${#line[*]} ))
done < rows
echo
saved_ifs="$IFS"
while read -a line; do
IFS=+
echo $(( ( ${line[*]} ) / ${#line[*]} ))
IFS="$saved_ifs"
done < rows
Others have already pointed out that expr is integer-only, and recommended writing your script in awk instead of shell.
Your system may have a number of tools on it that support arbitrary-precision math, or floats. Two common calculators in shell are bc which follows standard "order of operations", and dc which uses "reverse polish notation".
Either one of these can easily be fed your data such that per-line averages can be produced. For example, using bc:
#!/bin/sh
while read line; do
set - ${line}
c=$#
string=""
for n in $*; do
string+="${string:++}$1"
shift
done
average=$(printf 'scale=4\n(%s) / %d\n' $string $c | bc)
printf "%s // avg=%s\n" "$line" "$average"
done
Of course, the only bc-specific part of this is the format for the notation and the bc itself in the third last line. The same basic thing using dc might look like like this:
#!/bin/sh
while read line; do
set - ${line}
c=$#
string="0"
for n in $*; do
string+=" $1 + "
shift
done
average=$(dc -e "4k $string $c / p")
printf "%s // %s\n" "$line" "$average"
done
Note that my shell supports appending to strings with +=. If yours does not, you can adjust this as you see fit.
In both of these examples, we're printing our output to four decimal places -- with scale=4 in bc, or 4k in dc. We are processing standard input, so if you named these scripts "calc", you might run them with command lines like:
$ ./calc < inputfile.txt
The set command at the beginning of the loop turns the $line variable into positional parameters, like $1, $2, etc. We then process each positional parameter in the for loop, appending everything to a string which will later get fed to the calculator.
Also, you can fake it.
That is, while bash doesn't support floating point numbers, it DOES support multiplication and string manipulation. The following uses NO external tools, yet appears to present decimal averages of your input.
#!/bin/bash
declare -i total
while read line; do
set - ${line}
c=$#
total=0
for n in $*; do
total+="$1"
shift
done
# Move the decimal point over prior to our division...
average=$(($total * 1000 / $c))
# Re-insert the decimal point via string manipulation
average="${average:0:$((${#average} - 3))}.${average:$((${#average} - 3))}"
printf "%s // %0.3f\n" "$line" "$average"
done
The important bits here are:
* declare which tells bash to add to $total with += rather than appending it as if it were a string,
* the two average= assignments, the first of which multiplies $total by 1000, and the second of which splits the result at the thousands column, and
* printf whose format enforces three decimal places of precision in its output.
Of course, input still needs to be integers.
YMMV. I'm not saying this is how you should solve this, just that it's an option. :)
This is a pretty old post, but came up at the top my Google search, so thought I'd share what I came up with:
while read line; do
# Convert each line to an array
ARR=( $line )
# Append each value in the array with a '+' and calculate the sum
# (this causes the last value to have a trailing '+', so it is added to '0')
ARR_SUM=$( echo "${ARR[#]/%/+} 0" | bc -l)
# Divide the sum by the total number of elements in the array
echo "$(( ${ARR_SUM} / ${#ARR[#]} ))"
done < "$filename"
I am trying to write a function in bash but it won't work. The function is as follows, it gets a file in the format of:
1 2 first 3
4 5 second 6
...
I'm trying to access only the strings in the 3rd word in every line and to fill the array "arr" with them, without repeating identical strings.
When I activated the "echo" command right after the for loop, it printed only the first string in every iteration (in the above case "first").
Thank you!
function storeDevNames {
n=0
b=0
while read line; do
line=$line
tempArr=( $line )
name=${tempArr[2]}
for i in $arr ; do
#echo ${arr[i]}
if [ "${arr[i]}" == "$name" ]; then
b=1
break
fi
done
if [ "$b" -eq 0 ]; then
arr[n]=$name
n=$(($n+1))
fi
b=0
done < $1
}
The following line seems suspicious
for i in $arr ; do
I changed it as follows and it works for me:
#! /bin/bash
function storeDevNames {
n=0
b=0
while read line; do
# line=$line # ?!
tempArr=( $line )
name=${tempArr[2]}
for i in "${arr[#]}" ; do
if [ "$i" == "$name" ]; then
b=1
break
fi
done
if [ "$b" -eq 0 ]; then
arr[n]=$name
(( n++ ))
fi
b=0
done
}
storeDevNames < <(cat <<EOF
1 2 first 3
4 5 second 6
7 8 first 9
10 11 third 12
13 14 second 15
EOF
)
echo "${arr[#]}"
You can replace all of your read block with:
arr=( $(awk '{print $3}' <"$1" | sort | uniq) )
This will fill arr with only unique names from the 3rd word such as first, second, ... This will reduce the entire function to:
function storeDevNames {
arr=( $(awk '{print $3}' <"$1" | sort | uniq) )
}
Note: this will provide a list of all unique device names in sorted order. Removing duplicates also destroys the original order. If preserving the order accept where duplicates are removed, see 4ae1e1's alternative.
You're using the wrong tool. awk is designed for this kind of job.
awk '{ if (!seen[$3]++) print $3 }' <"$1"
This one-liner prints the third column of each line, removing duplicates along the way while preserving the order of lines (only the first occurrence of each unique string is printed). sort | uniq, on the other hand, breaks the original order of lines. This one-liner is also faster than using sort | uniq (for large files, which doesn't seem to be applicable in OP's case), since this one-liner linearly scans the file once, while sort is obviously much more expensive.
As an example, for an input file with contents
1 2 first 3
4 5 second 6
7 8 third 9
10 11 second 12
13 14 fourth 15
the above awk one-liner gives you
first
second
third
fourth
To put the results in an array:
arr=( $(awk '{ if (!seen[$3]++) print $3 }' <"$1") )
Then echo ${arr[#]} will give you first second third fourth.
I am making a bash script and I have encountered a problem. So let's say I got this
function create_some_array(){
for i in 0 1 2 3 .. 10
do
a[i]=$i
done
}
create_some_array
echo ${a[*]}
Is there any way I can make this work? I have searched quite a lot and nothing I found worked.
I think making the a[] a global variable should work but I can't find something that actually works in my code. Is there any way to return the array from the function to main program?
Thanks in advance
This won't work as expected when there are whitespaces in the arrays:
function create_some_array() {
local -a a=()
for i in $(seq $1 $2); do
a[i]="$i $[$i*$i]"
done
echo ${a[#]}
}
and worse: if you try to get array indices from the outside "a", it turns out to be a scalar:
echo ${!a[#]}
even assignment as an array wont help, as possible quoting is naturally removed by the echo line and evaluation order cannot be manipulated to escape quoting: try
function create_some_array() {
...
echo "${a[#]}"
}
a=($(create_some_array 0 10))
echo ${!a[#]}
Still, printf seems not to help either:
function create_some_array() {
...
printf " \"%s\"" "${a[#]}"
}
seems to produce correct output on one hand:
$ create_some_array 0 3; echo
"0 0" "1 1" "2 4" "3 9"
but assignment doesn't work on the other:
$ b=($(create_some_array 0 3))
$ echo ${!b[#]}
0 1 2 3 4 5 6 7
So my last trick was to do assignment as follows:
$ eval b=("$(create_some_array 0 3)")
$ echo -e "${!b[#]}\n${b[3]}"
0 1 2 3
3 9
Tataaa!
P.S.: printf "%q " "${a[#]}" also works fine...
This works fine as described. The most likely reason it doesn't work in your actual code is because you happen to run it in a subshell:
cat textfile | create_some_array
echo ${a[*]}
would not work, because each element in a pipeline runs in a subshell, and
myvalue=$(create_some_array)
echo ${a[*]}
would not work, since command expansion happens in a subshell.
You can make an array local to a function, and then return it:
function create_some_array(){
local -a a=()
for i in $(seq $1 $2); do
a[i]=$i
done
echo ${a[#]}
}
declare -a a=()
a=$(create_some_array 0 10)
for i in ${a[#]}; do
echo "i = " $i
done
Hi here is my solution:
show(){
local array=()
array+=("hi")
array+=("everything")
array+=("well?")
echo "${array[#]}"
}
for e in $(show);do
echo $e
done
Try this code on: https://www.tutorialspoint.com/execute_bash_online.php
Both these work for me with sh and bash:
arr1=("192.168.3.4" "192.168.3.4" "192.168.3.3")
strArr=$(removeDupes arr1) # strArr is a string
for item in $strArr; do arr2+=("$item"); done # convert it to an array
len2=${#arr2[#]} # get array length
echo "${len2}" # echo length
eval arr3=("$(removeDupes arr1)") # shellcheck does not like this line and won't suppress it but it works
len3=${#arr3[#]} # get array length
echo "${len3}" # echo length
As an aside, the removeDupes function looks like this:
removeDupes() {
arg="$1[#]"
arr=("${!arg}")
len=${#arr[#]}
resultArr=()
# some array manipulation here
echo "${resultArr[#]}"
}
This answer is based on but better explains and simplifies the answers from #Hans and #didierc