Please see the the xy/timeseries chart I have posted here: http://imagebin.org/151195
How do I selectively render only the horizontal lines, and leave out the lines between the neighboring data points that don't have the same y value? Basically the result would be a series of horizontal lines?
You'll have to scan your data model to find the ordinate where dy/dx < ɛ, for some value of ɛ near zero. Of course, you'll have to scan past the initial flat part, and decide how to deal with a series that never rises above ɛ.
Once you know the desired ordinate, use setLowerBound() on your domain axis.
Related
I have two series to be plotted as a line chart with Win Form Charts. The first series has x,y values of
{(datetime1:4),(datetime2:4),(datetime3:4),(datetime4:1),(datetime5:3)}
And the second series has x,y values of
{(datetime1:4),(datetime3:14),(datetime5:6)}
Since the second series has datetime2 and datetime4 missing, I have added DbNull.Value as value for these points. So now the second series will be
{(datetime1:4),(datetime2:DbNull.Value),(datetime3:14),(datetime4:DbNull.Value),(datetime5:6)}
Because of this the second series shows only dots. Could you please suggest me how can I connect these empty points with the average of the two closest data points.
The way to acheive this is
mySeries.EmptyPointStyle.BorderDashStyle = ChartDashStyle.Dash; // select the style you want
mySeries.EmptyPointStyle.Color = Color.Gray; // setting the color might be required
mySeries["EmptyPointValue"] = "Average";
I am working with and I oxyplot download an example the following link:
http://blog.bartdemeyer.be/2013/03/creating-graphs-in-wpf-using-oxyplot/
I added my own data plotting to go, but the incoming points are accumulated and that makes the graph becomes unreadable.
how I do like to go update the chart so that the old points are eliminated and new points are displayed normally and not stacked.
http://blog.bartdemeyer.be/wp-content/uploads/image_thumb19.png
You need to zoom it. This thread from oxyplot disscusion will help you.
http://oxyplot.codeplex.com/discussions/402272
Use LineSeries.Points.RemoveAt(index)
Example:
(DataPlot.Series[0] as LineSeries).Points.Add(new DataPoint(xValue, yValue0));
(DataPlot.Series[1] as LineSeries).Points.Add(new DataPoint(xValue, yValue1));
if (valueRange > 10000) //points will accumulate until the x-axis reaches 10000
{ //after 10000
(DataPlot.Series[0] as LineSeries).Points.RemoveAt(0); //removes first point of first series
(DataPlot.Series[1] as LineSeries).Points.RemoveAt(0); //removes first point of second series
}
But you must use it together - adding one new point and removing one. Then the points will not accumulate and you will have x-axis of range you wish.
I have to do some image processing but I don't know where to start. My problem is as follows :-
I have a 2D fiber image (attached with this post), in which the fiber edges are denoted by white color and the inside of the fiber is black. I want to choose any black pixel inside the fiber, and travel from it along the length of the fiber. This will involve comparing the contrast with the surrounding pixels and then travelling in the desired direction. My main aim is to find the length of the fiber
So can someone please tell me atleast where to start? I have made a rough algorithm in my mind on how to approach my problem but I don't know even which software/library to use.
Regards
Adi
EDIT1 - Instead of OpenCV, I started using MATLAB since I found it much easier. I applied the Hough Transform and then Houghpeaks function with max no. of peaks = 100 so that all fibers are included. After that I got the following image. How do I find the length now?
EDIT2 - I found a research article on how to calculate length using Hough Transform but I'm not able to implement it in MATLAB. Someone please help
If your images are all as clean as the one you posted, it's quite an easy problem.
The very first technique I'd try is using a Hough Transform to estimate the line parameters, and there is a good implementation of the algorithm in OpenCV. After you have them, you can estimate their length any way you want, based on whatever other constraints you have.
Problem is two-fold as I see it:
1) locate start and end point from your starting position.
2) decide length between start and end points
Since I don't know your input data I assume it's pixel data with a 0..1 data on each pixel representing it's "whiteness".
In order to find end points I would do some kind of WALKER/AI that tries to walk in different locations, knowing original pos and last traversed direction then continuing along that route until "forward arc" is all white. This assumes fiber is somewhat straight (is it?).
Once you got start and end points you can input these into a a* path finding algorithm and give black pixels a low value and white very high. Then find shortest distance between start and end point, that is the length of the fiber.
Kinda hard to give more detail since I have no idea what techniques you gonna use and some example input data.
Assumptions:
-This image can be considered a binary image where there are only 0s(black) and 1s(white).
-all the fibers are straight and their starting and ending points are on borders.
-we can come up with a limit for thickness in fiber(thickness of white lines).
Under these assumptions:
start scanning the image border(start from wherever you want in whichever direction you want...just be consistent) until you encounter with the first white pixel.At this point your program will understand that this is definitely a starting point. By knowing this, you will gather all the white pixels until you reach a certain limit(or a threshold). The idea here is, if there is a fiber,you will get the angle between the fiber and the border the starting point is on...of course the more pixels you get(the inner you get)the surer you will be in the end. This is the trickiest part. after somehow ending up with a line...you need to calculate the angle(basic trigonometry). Since you know the starting point, the width/height of the image and the angle(or cos/sin of those) you will have the exact coordinate of the end point. Be advised...the exactness here is not really what you might have understood because we may(the thing is we will) have calculation errors in cos/sin values. So you need to hold the threshold as long as possible. So your end point will not be a point actually but rather an area indicating possibility that the ending point is somewhere inside that area. The rest is just simple maths.
Obviously you can put too much detail in this method like checking the both white lines that makes the fiber and deciding which one is longer or you can allow some margin for error since those lines will not be straight properly...this is where a conceptual thickness comes to the stage etc.
Programming:
C# has nice stuff and easy for you to use...I'll put some code here...
newBitmap = new Bitmap(openFileDialog1.FileName);
for (int x = 0; x < newBitmap.Width; x++)
{
for (int y = 0; y < newBitmap.Height; y++)
{
Color originalColor = newBitmap.GetPixel(x, y);//gets the pixel value...
//things go here...
}
}
you'll get the image from a openfiledialog and bitmap the image. inside the nested for loop this code scans the image left-to-right however you can change this...
Since you know C++ and C, I would recommend OpenCV
. It is open-source so if you don't trust anyone like me, you won't have a problem ;). Also if you want to use C# like #VictorS. Mentioned I would use EmguCV which is the C# equivilant of OpenCV. Tutorials for OpenCV are included and for EmguCV can be found on their website. Hope this helps!
Download and install the latest version of 3Dslicer,
Load your data and go the the package>EM segmenter without Atlas>
Choose your anatomical tree in 2 different labels, the back one which is your purpose, the white edges.
The choose the whole 2D image as your ROI and click on segment.
Here is the result, I labeled the edges in green and the black area in white
You can modify your tree and change the structures you define.
You can give more samples to your segmentation to make it more accurate.
I have custom control - chart with size, for example, 300x300 pixels and more than one million points (maybe less) in it. And its clear that now he works very slowly. I am searching for algoritm which will show only few points with minimal visual difference.
I have a link to the component which have functionallity exactly what i need
(2 million points demo):
I will be grateful for any matherials, links or thoughts how to realize such functionallity.
If I understand your question correctly, then you are looking to plot a graph of a dataset where you have ~1M points, but the chart's horizontal resolution is much smaller? If so, you can down-sample your dataset to get about the number of available x values. If your data is sorted in equal intervals, you can extract every N'th point and plot it. Choose N such that the number of points is, say, double the resolution (in this case, N=2000 will give you 500 points to display).
If the intervals are very different from eachother (not regularly spaced), you can approximate your graph with a polynomial, or spline or any other method that fits, and then interpolate 300-600 points from that approximation.
EDIT:
Depending on the nature of the data, you may end up with aliasing artifacts when you simply sample every N't point. There are probably better methods for coping with this problem, but again - it depends on what exactly you want to plot.
You could always buy the control - it is for sale!
John-Daniel Trask (Co-founder of Mindscape ;-)
I have to make an application that recognizes inside an black and white image a piece of tetris given by the user. I read the image to analyze into an array.
How can I do something like this using C?
Assuming that you already loaded the images into arrays, what about using regular expressions?
You don't need exact shape matching but approximately, so why not give it a try!
Edit: I downloaded your doc file. You must identify a random pattern among random figures on a 2D array so regex isn't suitable for this problem, lets say that's the bad news. The good news is that your homework is not exactly image processing, and it's much easier.
It's your homework so I won't create the code for you but I can give you directions.
You need a routine that can create a new piece from the original pattern/piece rotated. (note: with piece I mean the 4x4 square - all the cells of it)
You need a routine that checks if a piece matches an area from the 2D image at position x,y - the matching area would have corners (x-2, y-2, x+1, y+1).
You search by checking every image position (x,y) for a match.
Since you must use parallelism you can create 4 threads and assign to each thread a different rotation to search.
You might not want to implement that from scratch (unless required, of course) ... I'd recommend looking for a suitable library. I've heard that OpenCV is good, but never done any work with machine vision myself so I haven't tested it.
Search for connected components (i.e. using depth-first search; you might want to avoid recursion if efficiency is an issue; use your own stack instead). The largest connected component should be your tetris piece. You can then further analyze it (using the shape, the size or some kind of border description)
Looking at the shapes given for tetris pieces in Wikipedia, called "I,J,L,O,S,T,Z", it seems that the ratios of the sides of the bounding box (easy to find given a binary image and C) reveal whether you have I (4:1) or O (1:1); the other shapes are 2:3.
To detect which of the remaining shapes you have (J,L,S,T, or Z), it looks like you could collect the length and position of the shape's edges that fall on the bounding box's edges. Thus, T would show 3 and 1 along the 3-sides, and 1 and 1 along the 2 sides. Keeping track of the positions helps distinguish J from L, S from Z.