C: Preprocessor in Macros? - c

Is there a way to use preprocessor keywords inside of a macro? If there is some sort of escape character or something, I am not aware of it.
For example, I want to make a macro that expands to this:
#ifdef DEBUG
printf("FOO%s","BAR");
#else
log("FOO%s","BAR");
#endif
from this:
PRINT("FOO%s","BAR");
Is this possible, or am I just crazy (and I will have to type out the preprocessor conditional every time I want to show a debug message)?

You can't do that directly, no, but you can define the PRINT macro differently depending on whether DEBUG is defined:
#ifdef DEBUG
#define PRINT(...) printf(__VA_ARGS__)
#else
#define PRINT(...) log(__VA_ARGS__)
#endif

Just do it the other way around:
#ifdef DEBUG
#define PRINT printf
#else
#define PRINT log
#endif

You're not crazy, but you're approaching this from the wrong angle. You can't have a macro expand to have more preprocessor arguments, but you can conditionally define a macro based on preprocessor arguments:
#ifdef DEBUG
# define DEBUG_PRINT printf
#else
# define DEBUG_PRINT log
#endif
If you have variadic macros, you could do #define DEBUG_PRINTF(...) func(__VA_ARGS__) instead. Either way works. The second lets you use function pointers, but I can't imagine why you'd need that for this purpose.

Related

How to write a C macro that expands to a `#ifdef... #endif` macro block?

I want to insert some debug output statements into a big C code base. These debug output statements will be controlled by a compiler option switch.
The debug output statement looks like this:
#ifdef DEBUG_FLAG
Print(someSymbol)
#endif
To save some typing , I am wondering if it is possible to define a simple macro that expands to above debug output statement block?
For example:
#define DBG_MACRO(someSymbol) (something that can expand to above)
You cannot put preprocessor directives inside a preprocessor macro.
However, nothing stops you from defining a macro which expands to nothing:
#ifdef DEBUG_FLAG
# define Print(x) Print(x)
#else
# define Print(x)
#endif
// Expands to an empty statement if DEBUG_FLAG were not set and
// to a call to Print(something) if DEBUG_FLAG were set.
Print(something);
The above depends on Print being a function which has already been declared/defined. If the macro is defined with DEBUG_FLAG set, the macro is "replaced" with itself, but C preprocessor expansions are not recursive so the expansion only happens once, resulting in a call to Print.
It is not possible to do it that way; however, it is easy to conditionally define a macro:
#ifdef DEBUG_FLAG
#define DBG_MACRO(arg) Print(arg)
#else
#define DBG_MACRO(arg)
#endif
It is better to make a DB macro that can handle many debug statements.
Then you can quickly surround ANY optional debug code with these 4 chars: DB( )
Here's the macro:
#define DEBUG true // or false
#ifdef DEBUG
#define DB(arg) { arg }
#else
#define DB(arg)
#endif
// Example uses:
DB(Serial.begin (9600);)
DB(if (!bLastRadarMotion)
Serial.println("New Motion");)
DB(Serial.print("Room just became UN-Occupied after ");
Serial.print(stillSecondsThreshold);
Serial.println(" seconds.");)
DB(
Serial.print("Room just became UN-Occupied after ");
Serial.print(stillSecondsThreshold);
Serial.println(" seconds.");
)

What does a #define directive without an argument do?

On Apple's opensource website, the entry for stdarg.h contains the following:
#ifndef _STDARG_H
#ifndef _ANSI_STDARG_H_
#ifndef __need___va_list
#define _STDARG_H
#define _ANSI_STDARG_H_
#endif /* not __need___va_list */
#undef __need___va_list
What do the #define statements do if there's nothing following their first argument?
There are sort of three possible "values" for an identifier in the preprocessor:
Undefined: we don't know about this name.
Defined, but empty: we know about this name, but it has no value.
Defined, with value: we know about this name, and it has a value.
The second, defined but empty, is often used for conditional compilation, where the test is simply for the definedness, but not the value, of an identifier:
#ifdef __cplusplus
// here we know we are C++, and we do not care about which version
#endif
#if __cplusplus >= 199711L
// here we know we have a specific version or later
#endif
#ifndef __cplusplus // or #if !defined(__cplusplus)
// here we know we are not C++
#endif
That's an example with a name that if it is defined will have a value. But there are others, like NDEBUG, which are usually defined with no value at all (-DNDEBUG on the compiler command line, usually).
They define a macro which expands to nothing. It's not very useful if you intended it to be used as a macro, but it's very useful when combined with #ifdef and friends—you can, for example, use it to create an include guard, so when you #include a file multiple times, the guarded contents are included only once.
You define something like:
#define _ANSI_STDARG_H_
so that, later you can check for:
#ifdef _ANSI_STDARG_H_

#define IDENTIFIER without a token

What does the following statement mean:
#define FAHAD
I am familiar with the statements like:
#define FAHAD 1
But what does the #define statement without a token signify?
Is it that it is similar to a constant definition?
Defining a constant without a value acts as a flag to the preprocessor, and can be used like so:
#define MY_FLAG
#ifdef MY_FLAG
/* If we defined MY_FLAG, we want this to be compiled */
#else
/* We did not define MY_FLAG, we want this to be compiled instead */
#endif
it means that FAHAD is defined, you can later check if it's defined or not with:
#ifdef FAHAD
//do something
#else
//something else
#endif
Or:
#ifndef FAHAD //if not defined
//do something
#endif
A real life example use is to check if a function or a header is available for your platform, usually a build system will define macros to indicate that some functions or headers exist before actually compiling, for example this checks if signal.h is available:
#ifdef HAVE_SIGNAL_H
# include <signal.h>
#endif/*HAVE_SIGNAL_H*/
This checks if some function is available
#ifdef HAVE_SOME_FUNCTION
//use this function
#else
//else use another one
#endif
Any #define results in replacing the original identifier with the replacement tokens. If there are no replacement tokens, the replacement is empty:
#define DEF_A "some stuff"
#define DEF_B 42
#define DEF_C
printf("%s is %d\n", DEF_A, DEF_B DEF_C);
expands to:
printf("%s is %d\n", "some stuff", 42 );
I put a space between 42 and ) to indicate the "nothing" that DEF_C expanded-to, but in terms of the language at least, the output of the preprocessor is merely a stream of tokens. (Actual compilers generally let you see the preprocessor output. Whether there will be any white-space here depends on the actual preprocessor. For GNU cpp, there is one.)
As in the other answers so far, you can use #ifdef to test whether an identifier has been #defined. You can also write:
#if defined(DEF_C)
for instance. These tests are positive (i.e., the identifier is defined) even if the expansion is empty.
#define FAHAD
this will act like a compiler flag, under which some code can be done.
this will instruct the compiler to compile the code present under this compiler option
#ifdef FAHAD
printf();
#else
/* NA */
#endif

Is there a way to both check a macro is defined and it equals a certain value at the same time

I regularly use object-like preprocessor macros as boolean flags in C code to turn on and off sections of code.
For example
#define DEBUG_PRINT 1
And then use it like
#if(DEBUG_PRINT == 1)
printf("%s", "Testing");
#endif
However, it comes a problem if the header file that contains the #define is forgotten to be included in the source code. Since the macro is not declared, the preprocessor treats it as if it equals 0, and the #if statement never runs.
When the header file is forgotten to be included, non-expected, unruly behaviour can occur.
Ideally, I would like to be able to both check that a macro is defined, and check that it equals a certain value, in one line. If it is not defined, the preprocessor throws an error (or warning).
I'm looking for something along the lines of:
#if-def-and-true-else-throw-error(DEBUG_PRINT)
...
#endif
It's like a combination of #ifdef and #if, and if it doesn't exist, uses #error.
I have explored a few avenues, however, preprocessor directives can't be used inside a #define block, and as far as I can tell, there is no preprocessor option to throw errors/warnings if a macro is not defined when used inside a #if statement.
This may not work for the general case (I don't think there's a general solution to what you're asking for), but for your specific example you might consider changing this sequence of code:
#if(DEBUG_PRINT == 1)
printf("%s", "Testing");
#endif
to:
if (DEBUG_PRINT == 1) {
printf("%s", "Testing");
}
It's no more verbose and will fail to compile if DEBUG_PRINT is not defined or if it's defined to be something that cannot be compared with 1.
as far as I can tell, there is no preprocessor option to throw errors/warnings if a macro is not defined when used inside a #if statement.
It can't be an error because the C standard specifies that behavior is legal. From section 6.10.1/3 of ISO C99 standard:
After all replacements due to macro expansion and the defined unary
operator have been performed, all remaining identifiers are replaced with the pp-number
0....
As Jim Balter notes in the comment below, though, some compilers (such as gcc) can issue warnings about it. However, since the behavior of substituting 0 for unrecognized preprocessor tokens is legal (and in many cases desirable), I'd expect that enabling such warnings in practice would generate a significant amount of noise.
There's no way to do exactly what you want. If you want to generate a compilation failure if the macro is not defined, you'll have to do it explicitly
#if !defined DEBUG_PRINT
#error DEBUG_PRINT is not defined.
#endif
for each source file that cares. Alternatively, you could convert your macro to a function-like macro and avoid using #if. For example, you could define a DEBUG_PRINT macro that expands to a printf call for debug builds but expands to nothing for non-debug builds. Any file that neglects to include the header defining the macro then would fail to compile.
Edit:
Regarding desirability, I have seen numerous times where code uses:
#if ENABLE_SOME_CODE
...
#endif
instead of:
#ifdef ENABLE_SOME_CODE
...
#endif
so that #define ENABLE_SOME_CODE 0 disables the code rather than enables it.
Rather than using DEBUG_PRINT directly in your source files, put this in the header file:
#if !defined(DEBUG_PRINT)
#error DEBUG_PRINT is not defined
#endif
#if DEBUG_PRINT
#define PrintDebug([args]) [definition]
#else
#define PrintDebug
#endif
Any source file that uses PrintDebug but doesn't include the header file will fail to compile.
If you need other code than calls to PrintDebug to be compiled based on DEBUG_PRINT, consider using Michael Burr's suggestion of using plain if rather than #if (yes, the optimizer will not generate code within a false constant test).
Edit:
And you can generalize PrintDebug above to include or exclude arbitrary code as long as you don't have commas that look like macro arguments:
#if !defined(IF_DEBUG)
#error IF_DEBUG is not defined
#endif
#if IF_DEBUG
#define IfDebug(code) code
#else
#define IfDebug(code)
#endif
Then you can write stuff like
IfDebug(int count1;) // IfDebug(int count1, count2;) won't work
IfDebug(int count2;)
...
IfDebug(count1++; count2++;)
Yes you can check both:
#if defined DEBUG && DEBUG == 1
# define D(...) printf(__VA_ARGS__)
#else
# define D(...)
#endif
In this example even when #define DEBUG 0 but it is not equal to 1 thus nothing will be printed.
You can do even this:
#if defined DEBUG && DEBUG
# define D(...) printf(__VA_ARGS__)
#else
# define D(...)
#endif
Here if you #define DEBUG 0 and then D(1,2,3) also nothing will be printed
DOC
Simply create a macro DEBUG_PRINT that does the actual printing:
#define DEBUG_PRINT(n, str) \
\
if(n == 1) \
{ \
printf("%s", str); \
} \
else if(n == 2) \
{ \
do_something_else(); \
} \
\
#endif
#include <stdio.h>
int main()
{
DEBUG_PRINT(1, "testing");
}
If the macro isn't defined, then you will get a compiler error because the symbol is not recognized.
#if 0 // 0/1
#define DEBUG_PRINT printf("%s", "Testing")
#else
#define DEBUG_PRINT printf("%s")
#endif
So when "if 0" it'll do nothing and when "if 1" it'll execute the defined macro.

Can you #define a comment in C?

I'm trying to do a debug system but it seems not to work.
What I wanted to accomplish is something like this:
#ifndef DEBUG
#define printd //
#else
#define printd printf
#endif
Is there a way to do that? I have lots of debug messages and I won't like to do:
if (DEBUG)
printf(...)
code
if (DEBUG)
printf(...)
...
No, you can't. Comments are removed from the code before any processing of preprocessing directives begin. For this reason you can't include comment into a macro.
Also, any attempts to "form" a comment later by using any macro trickery are not guaranteed to work. The compiler is not required to recognize "late" comments as comments.
The best way to implement what you want is to use macros with variable arguments in C99 (or, maybe, using the compiler extensions).
A common trick is to do this:
#ifdef DEBUG
#define OUTPUT(x) printf x
#else
#define OUTPUT(x)
#endif
#include <stdio.h>
int main(void)
{
OUTPUT(("%s line %i\n", __FILE__, __LINE__));
return 0;
}
This way you have the whole power of printf() available to you, but you have to put up with the double brackets to make the macro work.
The point of the double brackets is this: you need one set to indicate that it's a macro call, but you can't have an indeterminate number of arguments in a macro in C89. However, by putting the arguments in their own set of brackets they get interpreted as a single argument. When the macro is expanded when DEBUG is defined, the replacement text is the word printf followed by the singl argument, which is actually several items in brackets. The brackets then get interpreted as the brackets needed in the printf function call, so it all works out.
С99 way:
#ifdef DEBUG
#define printd(...) printf(__VA_ARGS__)
#else
#define printd(...)
#endif
Well, this one doesn't require C99 but assumes compiler has optimization turned on for release version:
#ifdef DEBUG
#define printd printf
#else
#define printd if (1) {} else printf
#endif
On some compilers (including MS VS2010) this will work,
#define CMT / ## /
but no grantees for all compilers.
You can put all your debug call in a function, let call it printf_debug and put the DEBUG inside this function.
The compiler will optimize the empty function.
The standard way is to use
#ifndef DEBUG
#define printd(fmt, ...) do { } while(0)
#else
#define printd(fmt, ...) printf(fmt, __VA_ARGS__)
#endif
That way, when you add a semi-colon on the end, it does what you want.
As there is no operation the compiler will compile out the "do...while"
Untested:
Edit: Tested, using it by myself by now :)
#define DEBUG 1
#define printd(fmt,...) if(DEBUG)printf(fmt, __VA_ARGS__)
requires you to not only define DEBUG but also give it a non-zer0 value.
Appendix:
Also works well with std::cout
In C++17 I like to use constexpr for something like this
#ifndef NDEBUG
constexpr bool DEBUG = true;
#else
constexpr bool DEBUG = false;
#endif
Then you can do
if constexpr (DEBUG) /* debug code */
The caveats are that, unlike a preprocessor macro, you are limited in scope. You can neither declare variables in one debug conditional that are accessible from another, nor can they be used at outside function scopes.
You can take advantage of if. For example,
#ifdef debug
#define printd printf
#else
#define printd if (false) printf
#endif
Compiler will remove these unreachable code if you set a optimization flag like -O2. This method also useful for std::cout.
As noted by McKay, you will run into problems if you simply try to replace printd with //. Instead, you could use variadric macros to replace printd with a function that does nothing as in the following.
#ifndef DEBUG
#define printd(...) do_nothing()
#else
#define printd(...) printf(__VA_ARGS__)
#endif
void do_nothing() { ; }
Using a debugger like GDB might help too, but sometimes a quick printf is enough.
I use this construct a lot:
#define DEBUG 1
#if DEBUG
#if PROG1
#define DEBUGSTR(msg...) { printf("P1: "); printf( msg); }
#else
#define DEBUGSTR(msg...) { printf("P2: "); printf( msg); }
#endif
#else
#define DEBUGSTR(msg...) ((void) 0)
#endif
This way I can tell in my console which program is giving which error message... also, I can search easily for my error messages...
Personally, I don't like #defining just part of an expression...
It's been done. I don't recommend it. No time to test but the mechanism is kind of like this:
#define printd_CAT(x) x ## x
#ifndef DEBUG
#define printd printd_CAT(/)
#else
#define printd printf
#endif
This works if your compiler processes // comments in the compiler itself (there's no guarantee like the ANSI guarantee that there are two passes for /* comments).

Resources