I have searched all around and the only results I get are using wget or curl.
I would like to be able to download full directories being served on my apache server using just a URL. For example if I want to download the directory Contents, I would like to be able to do this: http://127.0.0.1/Contents. Instead, when I do this, I just get a page with all the files inside it instead of actually downloading the directory.
Is it because this is not possible? Or because i just need to configure it in apache2.conf ?
Worked it out, in order to download a folder/directory from a URL, compress the folder into a .zip file or anything similar to .zip, then call it in the URL: http://127.0.0.1/yourfolder.zip
I have a Program Setup project in my solution that should install my program to the default location:
[ProgramFilesFolder][Manufacturer][ProductName]
However, this is not working and the installer is dumping all of the project files into my C: drive during installation without creating any folders at all. Even the installer says the files will be installed in "C:\Program Files (x86)\blah\blah", but they aren't. I double-checked I have values set for manufacturer and product name that don't include any special characters besides space.
I followed this tutorial step by step to get where I am:
https://learn.microsoft.com/en-us/cpp/ide/walkthrough-deploying-your-program-cpp?view=vs-2019
Any ideas on what could be causing my installation files to be placed in the C: drive?
I will say, my project runs correctly when running from the C drive, so the installation is technically working, it's just failing to create the program files folders and place the installation files in the correct location.
Thanks.
It seems the issue has to do with permissions on the computer. The files install to the correct directory when the installer is ran from the downloads folder.
I still find it odd that the installer dumps files into the C root drive instead of aborting the task, but at least I know now you can avoid this issue by running installer from the downloads folder.
I want to run a notebook that uses many header files defined in the directory. So basically I want to upload the entire directory to Google Colab so that I can run the notebook. But I am unable to find any such options and only able to upload files not complete folders. So can someone tell me how to upload entire directory to google colab?
I suggest you not to upload them just in Colab, since when you're restarting the runtime you will lose them (just need to re-upload them, but it can be an issue with slow connections).
I suggest you to use the google.colab package to manage files and folders in Colab. Just upload everything you need to your google drive, then import:
from google.colab import drive
drive.mount('/content/gdrive')
In this way, you just need to login to your google account through google authentication API, and you can use files/folders as if they were uploaded on Colab.
EDIT May 2022:
As pointed out in the comments, using Google Drive as storage for a large number of files to train a model is painfully slow, as described here: Google Colab is very slow compared to my PC. The better solution in this case is to zip the files, upload them to colab and then unzip them using
!unzip file.zip
More unzip options here: https://linux.die.net/man/1/unzip
You can zip them, upload, then unzip it.
!unzip file.zip
The easiest way to do this, if the folder/file is on your local drive:
Compress the folder into a ZIP file.
Upload the zipped file into colab using the upload button in the File section. Yes, there is a File section, see the left side of the colab screen.
Use this line of code to extract the file. Note: The file path is from colab's File section.
from zipfile import ZipFile
file_name = file_path
with ZipFile(file_name, 'r') as zip:
zip.extractall()
print('Done')
Click Refresh in the colab File section.
Access the files in your folder through the file paths
Downside: The files will be deleted after the runtime is over.
You can use some part of these steps if your file is on a Google Drive, just upload the zipped file to colab from Google Drive.
you can create a git repository and push the files and folders to it,
and then can clone the repository in colaboratory with the command
!git clone https://github.com/{username}/{projectname}.git
i feel this method is faster.
but if the file size is more than 100 mb you will have to zip the file or will have to add extentions to push it to github.
for more information refer the link below.
https://help.github.com/en/github/managing-large-files/configuring-git-large-file-storage
The best way to approach this problem is simple yet tricky sometimes.
You first need to compress the folder into a zipped file and upload the same into your google drive.
While doing so, Make sure that the folder is in the root directory of the drive and not in any other subfolder!. If the compressed folder/data is in other subfolder, you can easily move the same into the root directory.
Compresses folder/data in another subfolder often messes with the unzipping process when you will be specifying the file location.
Once you did the afore mentioned tasks, enter the following commands in the colab to mount your drive:
from google.colab import drive
drive.mount('/content/gdrive')
This will ask for an access token that can be generated by clicking on the url displayed in the output of the same cell
!ls gdrive/MyDrive
Check the contents of the drive by executing the above command and ensure that your folder/data is displayed in the output.
!unzip gdrive/MyDrive/<File_name_without_space>.zip
eg:
!unzip gdrive/MyDrive/data_folder.zip
Executing the same will start unzipping your folder into the memory.
Congrats! You have successfully uploaded your folder/data into the colab.
zip your files zip -r file.zip your_folder and then:
from google.colab import files
from zipfile import ZipFile
with ZipFile(files.upload(), 'r') as zip:
zip.extractall()
print('Done')
So here's what you can do:
-upload the dataset desired folder to your drive
-over colab, mount the drive wherein this
"from google.colab import drive
drive.mount('/content/gdrive')"
automatically shows up and you just need to run it
-then check for your file over the Files section on the left-hand side (if folder not visible try refreshing, also there should be a drop-down arrow next to it where you can check all the files under the folder )
-left-click over the folder wherein you get a COPY PATH option
-paste the copied path over the desired location in your colab
I have a WPF application. The client's database file is a .SQLite file and is created during the first run of the application. Also some excel files are also generated during run time. All these files are stored in AppData instead of the root directory.
I have given the following path for the database but it still creates the file in AppData folder.
System.IO.Directory.GetParent(System.Reflection.Assembly.GetExecutingAssembly().Location) + #"\NuEattendance_Faculty.sqlite"
Please help!!!
My query has been resolved. The application couldn't get the required permission and hence it created the files in AppData folder
I'm trying to run a GoogleAppEngine Application on my laptop using AppScale. I was following the instructions in this link , and all goes just fine until the deployment part.
appscale deploy ~/path-to-your-app
I dont know what path i have to put. The directory that contain my application is on my desktop. so i did
vagrant#precise64:~$ appscale deploy /Users/Mac/Desktop/MyApp
/Users/Mac/Desktop/MyApp is not a tar.gz file, a zip file, or a directory. Please try uploading either a tar.gz file, a zip file, or a directory.
But the virtual machine doesn't have access to it.
You must scp the application to the machine where the AppScale tools are located. Optionally there is a web interface to upload applications from the AppScale dashboard.