i just created a java file to parse a csv files and saved them into an oracle database.. but i need a field ID which acts as a primary key.. and i am a bit confused abt looping..
I think all you need to do is utilize a sequence (as suggested by Ronnis)
as such
CREATE SEQUENCE FIELD_ID_SEQ START WITH 1 INCREMENT BY 1 NOCYCLE NOCACHE;
/*NOTE THE SEQUENCE, WHILE INCREMENTING, IS NOT GUARANTEED TO BE 1,2,3,4...N ->expect gaps in the #*/
Now either in your java app where you are saving the data:
"INSERT INTO TABLE_OF_CSV(FIELD_ID, FIELD_COLA, FIELD_COLB) VALUES(FIELD_ID_SEQ.NEXTVAL, ?,?);"
OR
Now if you are using a procedure (or a procedure within a package) you can do this (note this returns the primary key back to the calling app)
create procedure insertIntoCSVTable(pCOLA IN TABLE_OF_CSV.FIELD_COLA%TYPE
, pCOLB IN TABLE_OF_CSV.FIELD_COLB%TYPE
, pFIELD_ID OUT TABLE_OF_CSV.FIELD_ID%TYPE)
AS
BEGIN
INSERT INTO TABLE_OF_CSV(FIELD_ID, FIELD_COLA, FIELD_COLB)
VALUES(FIELD_ID_SEQ.NEXTVAL, pCOLA, pCOLB)
RETURNING FIELD_ID
INTO pFIELD_ID
;
END insertIntoCSVTable;
no looping required assuming you are already looping in your java code (assuming a row-by-row insert)
OR
You may use a trigger to insert a new value into the table:
create or replace
TRIGGER TABLE_OF_CSV_TRG BEFORE INSERT ON TABLE_OF_CSV
FOR EACH ROW
BEGIN
<<COLUMN_SEQUENCES>>
BEGIN
IF :NEW.FIELD_ID IS NULL THEN
SELECT FIELD_ID_SEQ.NEXTVAL INTO :NEW.FIELD_ID FROM DUAL;
END IF;
END COLUMN_SEQUENCES;
END;
Related
I have to write a trigger for the tables I made and in insert update, I have to record a separate log table for those that are updated or inserted.
Columns in the log table will be like;
Done_process (will write update, insert)
Person (student number of the person treated)
Before (previous value for update, blank for insert)
After (new value for update, new value for insert)
This is my student_info table,
CREATE TABLE student_info (
school_id NUMBER,
id_no NUMBER NOT NULL UNIQUE,
name VARCHAR2(50) NOT NULL,
surname VARCHAR2(50) NOT NULL,
city VARCHAR2(50) NOT NULL,
birth_date DATE NOT NULL,
CONSTRAINT student_info_pk PRIMARY KEY(school_id )
);
CREATE TABLE og_log(
done_process VARCHAR2(30),
person VARCHAR2(30),
before VARCHAR2(30),
after VARCHAR2(30)
);
CREATE OR REPLACE TRIGGER og_trigger
BEFORE INSERT OR UPDATE OR DELETE ON student_info
REFERENCING OLD AS OLD NEW AS NEW
FOR EACH ROW
ENABLE
DECLARE
BEGIN
IF INSERTING THEN
INSERT INTO og_log(done_process, person, before, after)
VALUES ('Insert',:new.school_id,:old.name,:new.name);
ELSIF UPDATING THEN
INSERT INTO og_log(done_process, person, before, after)
VALUES ('Update',:new.school_id,:old.name,:new.name);
END IF;
END;
/
When I try to run the code it gave an error as follows;
> Trıgger OG_TRIGGER created.
>
>
> Error starting at line : 280 in command - ELSIF UPDATING THEN Error
> report - Unknown Command
>
> SP2-0552: Bind variable "NEW" not declared.
>
> 0 rows inserted.
>
>
> Error starting at line : 283 in command - END IF Error report -
> Unknown Command
>
> SP2-0044: For a list of known commands enter HELP and to leave enter
> EXIT.
>
> Error starting at line : 284 in command - END Error report - Unknown
> Command
I believe you are creating this trigger for learning purpose and not something a real use case because what you do in trigger doesn't really making any sense.
The trigger you have mentioned is not compiling due to syntactical problems like where v_id := 20201033.
Where clause is used to compare the value and thus you should use = instead := which is an assignment operator.
Besides this problem few points which still needs to be taken care
Give a explicit convention for creating local variables. e.g. you have created a local variable v_id and the same column is also available in student_info table. Though it is not a problem in this case but it's good practice to keep the local variable specific like let's say l_v_id.
You have used a select statement inside trigger which could leads to NO_DATA_FOUND error and you should handle it by either in the exception section or another way would be using aggregate function like max() if obviously v_id is primary key. I doubt why you need this select statement ( you could use between old and new using something like coalesce(:old.school_id,:new_schoold_id) if I understood you) but I would leave it open to you to decide and act accordingly.
Considering above points final code will be,
CREATE OR REPLACE TRIGGER og_trigger
BEFORE INSERT OR UPDATE OR DELETE ON student_info
REFERENCING OLD AS OLD NEW AS NEW
FOR EACH ROW
ENABLE
DECLARE
BEGIN
IF INSERTING THEN
INSERT INTO og_log(done_process, person, before, after)
VALUES ('Insert',:new.school_id,:old.city,:new.city);
ELSIF UPDATING THEN
INSERT INTO og_log(done_process, person, before, after)
VALUES ('Update',:new.school_id,:old.city,:new.city);
END IF;
END;
/
Find demo db<>fiddle
EDITED: Solving probably tool issue
I doubt the issue is with SQL Developer tool usage , however last try i would like to make,
Step1:
Drop both the tables used by issuing drop command
drop table STUDENT_INFO;
drop table og_log;
Step2:
Open another SQL worksheet using alt+F10 and do as I have shown in the following image. Please try and let me know.
First of all I have never attempted something like this in SSIS and I am very new to SSIS package development.
I need to build a component in my package that will run through a table of data (say 80 rows) and set a field titled DisplayOrder to the auto incremented number. The catch is that one of the records HAS to be set to 0 and then the rest of he records set to the auto incremented number.
In regards to code, I am not even sure what code to attach to this question or even what screenshots.
I finally figured it out and there is no need for a loop.
Create a SQL Task to clear the linked Table.
Script Used
DELETE FROM [Currency].[ExchangeRates]
Create a SQL Task to clear the main table.
Script Used
DELETE FROM [Currency].[CurrencyList]
Load the values into the main table.
Actions Used
Load values from XML Source
Dump values to [ExchangeRates] Table
Create a SQL Task to load the Values from the main table to the linked table.
Script Used
INSERT INTO [Currency].[CurrencyList] (CurrencyCode, CurrencyName, ExchangeRateID, DisplayOrder) SELECT [er].[TargetCurrency] AS [CurrencyCode], [er].[TargetName] AS [CurrencyName], [er].[ID] AS [ExchangeRateID], ROW_NUMBER() OVER (ORDER BY [ER].[TargetName]) AS [DisplayOrder] FROM [Currency].[ExchangeRates] AS [er] ORDER BY [CurrencyName]
Create a SQL Task to load a new record to the main table for use as DisplayOrder 0.
Script Used
INSERT INTO [Currency].[ExchangeRates] ([Title], [Link], [Description], [PubDate], [BaseCurrency], [TargetCurrency], [TargetName], [ExchangeRate]) VALUES ('1 USD = 1 USD','http://www.floatrates.com/usd/usd/','1 U.S. Dollar = 1 U.S. Dollar',(SELECT TOP 1 [PubDate] FROM [Currency].[ExchangeRates]),'USD','USD','United States Dollar','1')
Create a SQL Task to reference the newly created record from the main table.
Script Used
INSERT INTO [Currency].[CurrencyList] (CurrencyCode, CurrencyName, ExchangeRateID, DisplayOrder) SELECT [er].[TargetCurrency] AS [CurrencyCode], [er].[TargetName] AS [CurrencyName], [er].[ID] AS [ExchangeRateID], 0 AS [DisplayOrder] FROM [Currency].[ExchangeRates] AS [er] WHERE [er].[TargetCurrency] = 'USD'
I m trying to write if statement to give error message if user try to add existing ID number.When i try to enter existing id i get error .untill here it s ok but when i type another id no and fill the fields(name,adress etc) it doesnt go to database.
METHOD add_employee.
DATA: IT_EMP TYPE TABLE OF ZEMPLOYEE_20.
DATA:WA_EMP TYPE ZEMPLOYEE_20.
Data: l_count type i value '2'.
SELECT * FROM ZEMPLOYEE_20 INTO TABLE IT_EMP.
LOOP AT IT_EMP INTO WA_EMP.
IF wa_emp-EMPLOYEE_ID eq pa_id.
l_count = l_count * '0'.
else.
l_count = l_count * '1'.
endif.
endloop.
If l_count eq '2'.
WA_EMP-EMPLOYEE_ID = C_ID.
WA_EMP-EMPLOYEE_NAME = C_NAME.
WA_EMP-EMPLOYEE_ADDRESS = C_ADD.
WA_EMP-EMPLOYEE_SALARY = C_SAL.
WA_EMP-EMPLOYEE_TYPE = C_TYPE.
APPEND wa_emp TO it_emp.
INSERT ZEMPLOYEE_20 FROM TABLE it_emp.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
TITEL = 'INFO'
TEXTLINE1 = 'Record Added Successfully.'.
elseif l_count eq '0'.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
TITEL = 'INFO'
TEXTLINE1 = 'Selected ID already in database.Please type another ID no.'.
ENDIF.
ENDMETHOD.
I'm not sure I'm getting your explanation. Why are you trying to re-insert all the existing entries back into the table? You're just trying to insert C_ID etc if it doesn't exist yet? Why do you need all the existing entries for that?
If so, throw out that select and the loop completely, you don't need it. You have a few options...
Just read the table with your single entry
SELECT SINGLE * FROM ztable INTO wa WITH KEY ID = C_ID etc.
IF SY-SUBRC = 0.
"this entry exists. popup!
ENDIF.
Use a modify statement
This will overwrite duplicate entries with new data (so non key fields may change this way), it wont fail. No need for a popup.
MODIFY ztable FROM wa.
Catch the SQL exceptions instead of making it dump
If the update fails because of an exception, you can always catch it and deal with exceptional situations.
TRY .
INSERT ztable FROM wa.
CATCH sapsql_array_insert_duprec.
"do your popup, the update failed because of duplicate records
ENDTRY.
I think there's a bug when appending in internal table 'IT_EMP' and inserting in 'ZEMPLOYEE_20' table.
Suppose you append the first time and then you insert. But when you append the second time you will have 2 records in 'IT_EMP' that are going to be inserted in 'ZEMPLOYEE_20'. That is because you don't refresh or clear the internal table and there you will have a runtime error.
According to SAP documentation on 'Inserting Lines into Tables ':
Inserting Several Lines
To insert several lines into a database table, use the following:
INSERT FROM TABLE [ACCEPTING DUPLICATE KEYS] . This
writes all lines of the internal table to the database table in
one single operation. The same rules apply to the line type of
as to the work area described above. If the system is able to
insert all of the lines from the internal table, SY-SUBRC is set to 0.
If one or more lines cannot be inserted because the database already
contains a line with the same primary key, a runtime error occurs.
Maybe the right direction here is trying to insert the work area directly but before you must check if record already exists using the primary key.
Check the SAP documentation on this issue clicking the link before.
On the other hand, once l_count is zero because of l_count = l_count * '0'. that value will never change to any other number making that you won't append or insert again.
why are you retrieving all entries from zemployee_20 ?
You can directly check wether the 'id' exists already or not by using select single. If exists, then show message, if not, add.
It is recommended to retrieve only one field when its needed and not the entire table with asterisc *
SELECT single employee_id FROM ZEMPLOYEE_20 where employee_id = p_id INTO v_id. ( or field in structure )
if sy-subrc = 0. "exists
"show message
else. "not existing id
"populate structure and then add record to Z table
endif.
Furthermore, l_count is not only unnecessary but also bad implemented.
You can directly use the insert query,if the sy-subrc is unsuccessful raise the error message.
WA_EMP-EMPLOYEE_ID = C_ID.
WA_EMP-EMPLOYEE_NAME = C_NAME.
WA_EMP-EMPLOYEE_ADDRESS = C_ADD.
WA_EMP-EMPLOYEE_SALARY = C_SAL.
WA_EMP-EMPLOYEE_TYPE = C_TYPE.
INSERT ZEMPLOYEE_20 FROM WA_EMP.
If sy-subrc <> 0.
Raise the Exception.
Endif.
Assuming my table consist of two columns ID and Name.
And assume I have my stored procedure working on vb.net that inserts rows into the database.
But my system needs to check if an ID entered in a textbox already exists in the database when ADD button is click.
CREATE PROCEDURE AddOfficeEquipmentProfile
(
#OE_ID varchar(11),
#OE_Category char(3) =NULL,
#OE_SubCategory char(3)= NULL,
#OE_Name varchar(35)=NULL,
#OE_User varchar(35)=NULL,
#OE_Brand varchar(15)=NULL,
#OE_Model varchar(35)=NULL,
#OE_Specs varchar(1000)=NULL,
#OE_SerialNo varchar(35)=NULL,
#OE_PropertyNo varchar(35)=NULL,
#OE_MacAddress varchar(100)=NULL,
#OE_Static_IP varchar(15)=NULL,
#OE_Vendor varchar(35)=NULL,
#OE_PurchaseDate smalldatetime,
#OE_WarrantyInclusiveYear int=NULL,
#OE_WarrantyStatus char(2)= NULL,
#OE_Status varchar(15)=NULL,
#OE_Dept_Code char(3)= NULL,
#OE_Location_Code char(8)= NULL,
#OE_Remarks varchar(1000)= NULL
)
AS
INSERT INTO tblOfficeEquipmentProfile (OE_ID, OE_Category, OE_SubCategory, OE_Name, OE_User, OE_Brand, OE_Model, OE_Specs, OE_SerialNo,
OE_PropertyNo, OE_MacAddress, OE_Static_IP, OE_Vendor, OE_PurchaseDate, OE_WarrantyInclusiveYear, OE_WarrantyStatus, OE_Status, OE_Dept_Code,
OE_Location_Code, OE_Remarks )
VALUES (#OE_ID, #OE_Category, #OE_SubCategory, #OE_Name, #OE_User, #OE_Brand, #OE_Model,
#OE_Specs, #OE_SerialNo, #OE_PropertyNo, #OE_MacAddress, #OE_Static_IP, #OE_Vendor, #OE_PurchaseDate, #OE_WarrantyInclusiveYear, #OE_WarrantyStatus,
#OE_Status, #OE_Dept_Code, #OE_Location_Code, #OE_Remarks)
GO
few things you can do
make ID column as primary key, when insert you will get exception if duplicated
You can use auto increment ID, then you don't need to check ID exit or not. database will handle that
If you can't do above, run select statement or stored procedure to check whether id exist or not.
If this is for SQL Server and you're using a stored procedure - just try something like this:
CREATE PROCEDURE AddOfficeEquipmentProfile
(
#OE_ID varchar(11),
..... all your other parameters here.....
)
AS
IF NOT EXISTS (SELECT * FROM dbo.tblOfficeEquipmentProfile WHERE OE_ID = #OE_ID)
INSERT INTO dbo.tblOfficeEquipmentProfile(.... list of columns.....)
VALUES (......list of values................)
Assuming that OE_ID is your primary key and will be unique. Just check if that #OE_ID doesn't exist yet, and if it doesn't - insert the data. If it exists - don't do anything.
Building on the answer from #marc_s. In order to show a message to the user in case there already is a row in the database with the same id, you can check the number of affected rows from the query execution result.
This assumes that the stored procedure only inserts the row if the id is not present and does not emit any errors/exceptions.
Using ADO.NET (with an existing command executing the stored procedure):
Dim affectedRows as Integer = command.ExecuteNonQuery()
If affectedRows = 0 Then
'Handle the error here
MessageBox.Show("There is already a Profile with the supplied id")
Else
'Insert was made
End If
Check the following article to create a SP finding duplicate rows in any table:
http://www.codeproject.com/Articles/157977/Remove-Duplicate-Rows-from-a-Table-in-SQL-Server
I don't know if that is possible, but I want to copy a bunch of records from a temp table to a normal table. The problem is that some records may violate check constraints so I want to insert everything that is possible and generate error logs somewhere else for the invalid records.
If I execute:
INSERT INTO normal_table
SELECT ... FROM temp_table
nothing would be inserted if any record violates any constraint. I could make a loop and manually insert one by one, but I think the performance would be lower.
Ps: if possible, I'd like a solution that works with Oracle 9
From Oracle 10gR2, you can use the log errors clause:
EXECUTE DBMS_ERRLOG.CREATE_ERROR_LOG('NORMAL_TABLE');
INSERT INTO normal_table
SELECT ... FROM temp_table
LOG ERRORS REJECT LIMIT UNLIMITED;
In its simplest form. You can then see what errors you got:
SELECT ora_err_mesg$
FROM err$_normal_table;
More on the CREATE_ERROR_LOG step here.
I think this approach works from 9i, but don't have an instance available to test on, so this is actually run on 11gR2
Update: tested and tweaked (to avoid PLS-00436) in 9i:
declare
type t_temp_table is table of temp_table%rowtype;
l_temp_table t_temp_table;
l_err_code err_table.err_code%type;
l_err_msg err_table.err_msg%type;
l_id err_table.id%type;
cursor c is select * from temp_table;
error_array exception;
pragma exception_init(error_array, -24381);
begin
open c;
loop
fetch c bulk collect into l_temp_table limit 100;
exit when l_temp_table.count = 0;
begin
forall i in 1..l_temp_table.count save exceptions
insert into normal_table
values l_temp_table(i);
exception
when error_array then
for j in 1..sql%bulk_exceptions.count loop
l_id := l_temp_table(sql%bulk_exceptions(j).error_index).id;
l_err_code := sql%bulk_exceptions(j).error_code;
l_err_msg := sqlerrm(-1 * sql%bulk_exceptions(j).error_code);
insert into err_table(id, err_code, err_msg)
values (l_id, l_err_code, l_err_msg);
end loop;
end;
end loop;
end;
/
With all your real columns instead of just id, which I've done just for demo purposes:
create table normal_table(id number primary key);
create table temp_table(id number);
create table err_table(id number, err_code number, err_msg varchar2(2000));
insert into temp_table values(42);
insert into temp_table values(42);
Then run the anonymous block above...
select * from normal_table;
ID
----------
42
column err_msg format a50
select * from err_table;
ID ERR_CODE ERR_MSG
---------- ---------- --------------------------------------------------
42 1 ORA-00001: unique constraint (.) violated
This is less satisfactory on a few levels - more coding, slower if you have a lot of exceptions (because of the individual inserts for those), doesn't show which constraint was violated (or any other error details), and won't retain the errors if you rollback - though you could call an autonomous transaction to log it if that was an issue, which I doubt here.
If you have a small enough volume of data to not want to worry about the limit clause you can simplify it a bit:
declare
type t_temp_table is table of temp_table%rowtype;
l_temp_table t_temp_table;
l_err_code err_table.err_code%type;
l_err_msg err_table.err_msg%type;
l_id err_table.id%type;
error_array exception;
pragma exception_init(error_array, -24381);
begin
select * bulk collect into l_temp_table from temp_table;
forall i in 1..l_temp_table.count save exceptions
insert into normal_table
values l_temp_table(i);
exception
when error_array then
for j in 1..sql%bulk_exceptions.count loop
l_id := l_temp_table(sql%bulk_exceptions(j).error_index).id;
l_err_code := sql%bulk_exceptions(j).error_code;
l_err_msg := sqlerrm(-1 * sql%bulk_exceptions(j).error_code);
insert into err_table(id, err_code, err_msg)
values (l_id, l_err_code, l_err_msg);
end loop;
end;
/
The 9i documentation doesn't seem to be online any more, but this is in a new-features document, and lots of people have written about it - it's been asked about here before too.
If you're specifically interested only in check constraints then one method to think about is to read the definitions of the target check constraints from the data dictionary and apply them as predicates to the query that extracts data from the source table using dynamic sql.
Given:
create table t1 (
col1 number check (col1 between 3 and 10))
You can:
select constraint_name,
search_condition
from user_constraints
where constraint_type = 'C' and
table_name = 'T1'
The result being:
"SYS_C00226681", "col1 between 3 and 10"
From there it's "a simple matter of coding", as they say, and the method will work on just about any version of Oracle. The most efficient method would probably be to use a multitable insert to direct rows to either the intended target table or to an error logging table based on the result of a CASE statement that applies the check constraint predicates.