I have been trying to install Ushahidi platform for weeks but without any luck. I recently started over using Ushahidi latest release ushahidi-Ushahidi_Web-2.0.1-140-g0991172.zip and extracted it to folder ushahidi under my root.
I am using godaddy Linux server. I have tried both the manual and wizard to setup Ushahidi. In all cases, after installation, I get the same error when I try to access admin page. The error reads:
No input file specified.
I have tried tried installing using the wizard and the manual process. My PHP version is as required.
Any help will be appreciated. I need it to work so I can move on and customize it. Very disappointing such a good open source tool has poor installation guides!
Thanks.
Sting
there are a few things that can trip up following the installation.
Make sure that:
mod_rewrite is turned on in apache "a2enmod rewrite"
AllowOverride All is set in your apache config for your site (/etc/apache2/sites-available/default)
your .htaccess file points to the correct webroot
Related
I want to change the version of cxf on Service Mix 7.0.1 where cxf version is 3.1.9 . Because of using Brave tracing that is implemented in 3.1.12 version of cxf.
So Is there a way to change the version of the CXF on Service Mix.
I have deleted manually everything in the system/apache/cxf folder that has 3.1.9 version and add a file with 3.2.5 version. But it is still not working. When I write feature:list all of the cxf dependencies are with 3.1.9 version...
Deleting files from the system folder won't work. It does not scan the system folder for files, but rather uses it as a cache to go looking for specific versions. You don't need to add new versions to system either because it will download them from the central maven repo it they arn't in system.
If it starts up without a data folder, it will install features & versions listed in org.apache.karaf.features.cfg
One would expect to be able to delete the data folder, change the version in org.apache.karaf.features.cfg & start it up, but I tried that and Camel was broken. Unsure why.
I find it easier to deal with it using the management console.
Install the management console by dropping the following xml file into the deploy folder:
<features name="features-murray" xmlns="http://karaf.apache.org/xmlns/features/v1.2.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://karaf.apache.org/xmlns/features/v1.0.0 http://karaf.apache.org/xmlns/features/v1.2.0">
<repository>mvn:io.hawt/hawtio-karaf/1.5.7/xml/features</repository>
<feature name="murray" version="1" install="auto">
<feature>hawtio-offline</feature>
</feature>
</features>
Then point your browser at http://localhost:8181/hawtio and login with SMX/SMX.
From OSGI/Features add the your new feature version with the plus button:
mvn:org.apache.cxf.karaf/apache-cxf/3.1.12/xml/features
It may take some time to install, because it downloads it from the net. I found it bounced me out of the management console also, but after logging back in I could uninstall the old cxf 3.1.9. It again logged me out of the management console, but after logging back in I had Camel active and CXF on 3.1.12.
No testing though - goodness knows what else is broken.
Has anyone disabled directory listing in Zeppelin 0.6.0 (or other version) as a part of security measures?
Could you please let me know about the same.
Following "How to disable directory listing for Jetty's WebAppContext?", I've looked up the Apache Zeppelin installation directory, identified the web.xml file and added
<param-name>dirAllowed</param-name>
<param-value>false</param-value>
After restart it looked like that the configuration parameter wasn't picked up. Directory listing was still possible.
For my understanding, according ZEPPELIN-2014 and a commit, a patch of ZeppelinServer.java would be required to make such configuration possible or active.
It will be fixed as of Zeppelin 0.7.3 or 0.8.0.
I am trying to install Bugzilla on centos. Everything in the terminal went fine. But when I try to access Bugzilla through my browser, it is returning the error as shown below.
This XML file does not appear to have any style information associated with it.
The document tree is shown below.
<D:error><C:error/><m:human-readable errcode="2">
Could not open the requested SVN filesystem
</m:human-readable></D:error>"
Can any one help me to solve this issue?
Thanks in advance
The above error rises when there is port conflict between SVN and other applications.
We need to configure virtual host inorde3r to avoid port conflict between svn and other applications.
I'm developing a website and having development environment as Ubuntu 14.04, PHP 5.5.9, Apache 2.4.7. My issue is if some want accessing a file like http://domain.com/robots(without extension) then I should avoid but I've to allow if some tries to access http://domain.com/robots.txt(with extension).
Now in both ways I'm able to access files, I want to avoid this when user haven't given extension of the file using .htaccess or apache configuration file.
My previous environment was Apache 2.2 and PHP 5.3.10 at the time with default Apache configuration it was working as expected but after upgrade its not working as expected and due lack of knowledge on Apache configuration I'm unable to pick those lines of code.
Add following line in .htaccess
Options -Multiviews
I am getting an exception trying to use update/extract with PDF files
My Set up is:-
Ubuntu Server 11.10
Tomcat 6
Solr 3.5.0.2011.11.22.15.54.38
I can browse to solr/admin OK
I have put all the contrib/extract and apache-solr-cell3.5.0.jar libraries into the tomcat folder webapps/solr/WEB-INF/lib
I am calling extract using:-
curl "http://localhost:8080/solr/update/extract?uprefix=attr_&fmap.content=attr_content&commit=true" -F "file=/path/to/my.pdf"
error is
java.lang.NoClassDefFoundError: org/apache/tika/mime/MimeTypeException
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:264)
at org.apache.solr.core.SolrResourceLoader.findClass(SolrResourceLoader.java:383)
at org.apache.solr.core.SolrCore.createInstance(SolrCore.java:425)
at org.apache.solr.core.SolrCore.createRequestHandler(SolrCore.java:461)
at org.apache.solr.core.RequestHandlers$LazyRequestHandlerWrapper.getWrappedHandler(RequestHandlers.java:248)
at org.apache.solr.core.RequestHandlers$LazyRequestHandlerWrapper.handleRequest(RequestHandlers.java:239)
at org.apache.solr.core.SolrCore.execute(SolrCore.java:1372)
Would appreciate any pointers - the only time this error seems to come up elsewhere is with Nutch and cached results.
I have tried sending the mimetype in the querystring and also a *.doc file but got the same error.
According to the error message it is not a MimeTypeException exception you get: The problem is a NoClassDefFoundError, because Solr cannot load the class MimeTypeException.
Normally this class is present in tika-core.jar.
Make sure you actually have that file and also check if you have a lib statement in your solrconfig.xml pointing to the right directory.
This was due to the basic error of copying the necessary tika libraries (to tomcat6/webapps/solr/WEB-INF/lib) but leaving ownership of the jar files as ROOT instead of chown-ing them to TOMCAT6. After setting the right permission and restarting Tomcat it started working OK
Found the solution of this problem, I was using SolrJ to update my pdf indexing.
after deploy solr to tomcat, I didn't include the following libraries into the tomcat/webapp
and I get all the lazy loading problem, etc etc
I even try to get apache tika...
until I do this...
shutdown tomcat
\apache-solr-3.5.0\contrib\extraction
copy the libraries above to below
\apache-tomcat-7.0.26\webapps\solr\WEB-INF\lib
startup tomcat
cheers