Using silverlight, we are looking to move the focus to a textbox.
How do you use mvvm-light to trigger gotfocus?
The view contains:
<TextBox Margin="4,4,0,0" Text="{Binding Path=SearchOID, Mode=TwoWay}">
<i:Interaction.Triggers>
<i:EventTrigger EventName="GotFocus">
<cmd:EventToCommand Command="{Binding GotFocusCommand, Mode=TwoWay}"/>
</i:EventTrigger>
</i:Interaction.Triggers>
</TextBox>
How should the ViewModel look?
How do you trigger this from the ViewModel?
Ended up using a TriggerAction, very similar to:
http://www.codeproject.com/Articles/42988/Silverlight-Behaviors-and-Triggers-Making-a-Trigge.aspx
Related
I would like to trigger a command in my ViewModel when the pushpin is clicked on the map. How can I achieve this using databinding?
Here is the DataTemplate I am using for the pinpoints:
<DataTemplate x:Key="PushPinTemplate">
<map:Pushpin Cursor="Hand"
map:MapLayer.Position="{Binding Location}">
</map:Pushpin>
</DataTemplate>
A colleague found the solution:
After adding the Nuget Package System.Windows.Interactivity.WPF
and adding the xml namespace
xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity"
you can add an EventTrigger to the template, here the full template code, where
CachePushPinClicked is an ICommand
<DataTemplate x:Key="PushPinTemplate">
<map:Pushpin Cursor="Hand"
map:MapLayer.Position="{Binding Location}" >
<i:Interaction.Triggers>
<i:EventTrigger EventName="MouseLeftButtonDown">
<i:InvokeCommandAction Command="{Binding CachePushPinClicked}"/>
</i:EventTrigger>
</i:Interaction.Triggers>
</map:Pushpin>
</DataTemplate>
I have an editable ComboBox.
<ComboBox IsEditable="True">
<i:Interaction.Triggers>
<i:EventTrigger EventName="SelectionChanged">
<cmd:EventToCommand Command="{Binding CritereChangedCommand, Mode=OneWay}"/>
</i:EventTrigger>
<i:EventTrigger EventName="TextBoxBase.TextChanged">
<cmd:EventToCommand Command="{Binding CritereChangedCommand, Mode=OneWay}"/>
</i:EventTrigger>
</i:Interaction.Triggers>
</ComboBox>
I use GalaSoft.MvvmLight.Command.EventToCommand to bind the SelectionChanged event.
I also would like to bind the TextChanged event, but it is a little bit tricky:
This event is only accessible by the ComboBox TextBoxBase property, and I can't find the proper way to bind this event.
You can see one of my unsuccessful attempt: SelectionChanged binding works fine, but TextChanged binding does not.
I also tried this syntax:
<ComboBox IsEditable="True">
<TextBoxBase>
<i:Interaction.Triggers>
<i:EventTrigger EventName="TextChanged">
<cmd:EventToCommand Command="{Binding CritereChangedCommand, Mode=OneWay}" />
</i:EventTrigger>
</i:Interaction.Triggers>
</TextBoxBase>
<i:Interaction.Triggers>
<i:EventTrigger EventName="SelectionChanged">
<cmd:EventToCommand Command="{Binding CritereChangedCommand, Mode=OneWay}" />
</i:EventTrigger>
</i:Interaction.Triggers>
</ComboBox>
But this won't even compile. I get an error "Type that can be instantiated expected" on the TextBoxBase tag.
Any idea ?
I know, very late response... but I hope it will help someone.
The problem here is that the EventTrigger class in Microsoft.Expression.Interactivity.dll uses reflection to find the event by the value of the EventName property and this won't work for attached events like TextBoxBase.TextChanged.
One option, which I use, is to implement your own custom EventTrigger class as described here and use this one instead of EventTrigger (the link there to CommandAction implementation is broken, but I managed to get it using internet archive).
Another option, which I don't like because it's not classic MVVM Command use, is to bind the Text property of the ComboBox to a property in the ViewModel and invoke the command from the ViewModel code on the setter, like this:
<ComboBox IsEditable="True"
Text="{Binding Text, Mode=TwoWay}" />
And in the ViewModel:
private string text;
public string Text
{
get { return text; }
set
{
text = value;
OnPropertyChanged("Text");
if(CritereChangedCommand.CanExecute())
CritereChangedCommand.Execute();//call your command here
}
}
I have found a way to work around the problem:
I create an invisible TextBox, bound to the ComboBox, and I bind the command on the TextChanged event of the TextBox.
It's not pretty, but it works...
<ComboBox Name="CbRubrique" IsEditable="True">
<i:Interaction.Triggers>
<i:EventTrigger EventName="SelectionChanged">
<cmd:EventToCommand Command="{Binding CritereChangedCommand, Mode=OneWay}" />
</i:EventTrigger>
</i:Interaction.Triggers>
</ComboBox>
<TextBox Text="{Binding ElementName=CbRubrique, Path=Text, UpdateSourceTrigger=PropertyChanged}" Visibility="Collapsed">
<i:Interaction.Triggers>
<i:EventTrigger EventName="TextChanged">
<cmd:EventToCommand Command="{Binding CritereChangedCommand, Mode=OneWay}" />
</i:EventTrigger>
</i:Interaction.Triggers>
</TextBox>
I have a TabControl with a few TabItems. I want one of my TabItems to act as a button. When I click on the TabItem, I want it to execute a Command in my associated ViewModel. I have the following code in my View:
<TabItem Header="Manage Users" Visibility="{Binding IsAdmin, Converter={StaticResource VisibilityOfBool}}" >
<i:Interaction.Triggers>
<i:EventTrigger EventName="MouseLeftButtonDown">
<i:InvokeCommandAction Command="{Binding Path=OpenLoginCommand}"/>
</i:EventTrigger>
</i:Interaction.Triggers>
</TabItem>
The OpenLoginCommand is an ICommand in the ViewModel. I have the interactivity namespace defined. What am I missing here?
Try PreviewMouseLeftButtonDown
<TabItem Header="Manage Users" Visibility="{Binding IsAdmin, Converter={StaticResource VisibilityOfBool}}">
<i:Interaction.Triggers>
<i:EventTrigger EventName="PreviewMouseLeftButtonDown">
<i:InvokeCommandAction Command="{Binding Path=OpenLoginCommand}"/>
</i:EventTrigger>
</i:Interaction.Triggers>
</TabItem>
Try using MouseDown instead of MouseLeftButtonDown as referencing MSDN the latter event doesn't exist on a TabItem control.
If your requirements insist on left-button only, then check the state of the mouse within the command.
How to fire RoutedEvents of TextBlock in ViewModel from code behind in wpf.
Kindly let me know, how I can bind routed events in wpf code behind. Thanks
Well I use this (you will need System.Windows.Interactivity in Silverlight, but I suspect it's similar in WPF):
xmlns:GalaSoft_MvvmLight_Command="clr-namespace:GalaSoft.MvvmLight.Command;assembly=GalaSoft.MvvmLight.Extras.SL4"
xmlns:i="http://schemas.microsoft.com/expression/2010/interactivity"
<TextBlock Text="{Binding InputValue, Mode=TwoWay}">
<i:Interaction.Triggers>
<i:EventTrigger EventName="GotFocus">
<GalaSoft_MvvmLight_Command:EventToCommand Command="{Binding InputValueGotFocusCommand}" />
</i:EventTrigger>
</i:Interaction.Triggers>
</TextBlock>
You can do this easy in Blend
i have a tabcontrol. i'm trying to pass the tabcontrol as a parameter to figure out the selected tab item so i can get the tab header name. Binding this doesn't seem to work. ideas?
<TabControl Background="#FFF9F9F9" Height="650">
<i:Interaction.Triggers>
<i:EventTrigger EventName="SelectionChanged">
<n:ExecuteCommandAction Command="{Binding UpdateTabCommand}" Parameter="{Binding this}"/>
</i:EventTrigger>
</i:Interaction.Triggers>
in my viewmodel constructor i have:
_updateTabCommand = new ActionCommand< TabControl>(UpdateTab);
private method:
public void UpdateTab(TabControl tabControl)
{
var tabItem = (TabItem)tabControl.SelectedItem;
1) Use ElementName binding.
Example:
<TabControl Background="#FFF9F9F9"
Height="650"
Name="TabControl1">
<i:Interaction.Triggers>
<i:EventTrigger EventName="SelectionChanged">
<i:InvokeCommandAction Command="{Binding UpdateTabCommand}"
CommandParameter="{Binding ElementName=TabControl1}" />
</i:EventTrigger>
</i:Interaction.Triggers>
</TabControl>
2) Use FindAncestor binding:
Example:
<i:Interaction.Triggers>
<i:EventTrigger EventName="SelectionChanged">
<i:InvokeCommandAction Command="{Binding UpdateTabCommand}"
CommandParameter="{Binding RelativeSource={RelativeSource Mode=FindAncestor, AncestorType=TabControl}}" />
</i:EventTrigger>
</i:Interaction.Triggers>
First of all there is no such thing as {Binding this} in WPF. If you want to refer to the element on which you are setting Binding use RelativeSource binding with mode set to Self.
Second observation. Passing UI elements to ViewModel smells badly (impacts testability, increases code coupling and most likely the class will end up violating more good design principles). The fix is really simple: just bind TabControl.SelectedItem to the field on ViewModel.