Given a WPF Application running full screen, a fair amount of controls some of which will animate from off screen to center. I was wondering if there are any special ways to save on the amount of time required to optimize an application for different screen resolutions?
For example, using Blend I've setup some text, which is originally off screen to scroll into view. Now in design mode the start positions are static. If resolution changes the start positions will obviously not be correct.
So I guess to correct this, during app startup. I need to
Check resolution
Move the text box to the desired start location
Adjust the storyboard as required, so the frames all have correct co-ordinates depending on the res of the screen.
I don't mind doing all of this, but if there is an easier way please share!
Thanks
In WPF layout of controls should be made in such way, that when size of window or content changes, controls automaticaly resize/reposition themselves to reflect this change.
This is highly affected how your layout is made, especialy by using specific panels, that do layout of their child elements.
This is also made obvious by using device-independent units for sizes, margins and sometimes positions of controls. And also allows different kind of zooming and scaling of whole UI without any need to redesign the whole thing.
If you are trying to position your controls absolutely, either by using Canvas panel or margins, your are doing it totaly wrong.
In WPF, scene is measured in abstract units, not pixels, and controls are freely scaled. There should be no problems to center something, or what?
Related
Other questions on SE address how to speed up nested UI control resizing, but- what if there aren't any controls?
As you drag the edge of a WPF window, even a main window with no content, black bars flicker briefly during the drag. This produces a crummy feel- one that I don't want to inflict on customers:
It does get slower and heavier with a full UI on top of it as well. This doesn't even get into how ugly it looks when resizing using the top or left edges. Windows Forms- even with the heaviest UI I've built- never looks this bad right off the bat.
What can be done to make WPF window resizing performance comparable to win forms?
(I have Windows 7 x64 and a triple monitor system on an AT Radeon HD 7470.)
You could update your graphic card and try it out again but that wont change anything. The reason is pretty simple. We all get to see this sometimes based how fast/slow our computer is. Sometimes it runs smooth because we do not have many visuals to draw. The reason is no proper background color is found in graphic card at that moment in redrawing process. Your drivers are fine, and its not just because you use Wpf. Other techniques use the same mechanism behind redrawing.
The first thing WPF will do is clear out the dirty region that is going to redraw. The purpose of dirty regions is to reduce the amount of pixels sent to the output merger stage of the GPU pipeline. Here is where we see the black color. Window itself at that point has no background color or its background color is set to transparent and so to us the GPU draws the black background. Things run async in wpf which is good so.
To fix this you could set a fix color such as "White" to the Window. Then the WPF system will clean out the dirty region but fill it automatically with white color instead of black. This usually helps.
Match the window color or the color of top most layer. Dont let GPU use black and you should do fine. Btw Wpf is faster than WinForm so dont worry.
The look is crummy indeed, especially when using the top or left border.
Which exact problem your screen shot is showing depends on how long your app is taking to render as well as a couple of background related settings that you might be able to tweak to get better resize. Plus part of the ugly resize is specific to Aero.
While I can't address the specific crazy slowness of WPF redraw, I can at least give some insight on why you see black, where that is coming from, and whether you can change to a less annoying fill-in color.
It turns out there are multiple different sources of the black and the bad resize behavior from different Windows versions that combine together. Please see this Q&A which explains what is going on and provides advice for what to do (again, not specific to making WPF faster but just seeing what you can do given the speed you have):
How to smooth ugly jitter/flicker/jumping when resizing windows, especially dragging left/top border (Win 7-10; bg, bitblt and DWM)?
First time working on a GUI project.. and first time doing work on Windows so apologies in advance if this is a really noob question.
I'm taking baby steps into windows programming starting with vb.net WPF. Working in Visual Studio Express 2012.
I'm trying to work out how I can scale all the elements in a window with the window itself.
So for example, I'd create a window, say 1280x720, and place some images in the window. Say one at the top and one in the corner. (this is a basic media based application)
When I resize that window, I want the entire window to scale with it, so image 1 & 2 will get larger if the window gets larger, however this has to happen proportionally so that if I make the window a lot bigger in one direction one image can't overlap the other. Imagine the window is an image and I'm trying to resize it. (The overlap thing is the closest I've gotten to getting this working in my current attempts).
The layout in produciton will be more complex, comprising of mediaelements (video), images, text etc and all must scale accordingly.
This isn't something the user interacts with and so there are no form elements etc, and so I don't need form fields etc to stay the same size throughout scaling. I just need everything to scale like I'm scaling a picture. If for example I displayed this 1280x720 (16:9) layout on a 1920x1080 screen, maximised it should look identical only larger.
Hoping someone can point me in the right direction with this.
What I've tried so far- the few articles I did find on google relating to this (I may well be searching the wrong things) lead me to put all the elements in a viewbox, this lead to the overlap I mentioned earlier.
Ideas ?
I think you could use ViewBox container. The basic idea is as follows: ViewBox scales its content just as if it was an image scaled. This seems to be the closest result to what you've described in your question. Just put a Grid with absolutely-sized columns and rows into the ViewBox and set its Stretch to be Uniform:
<Viewbox Stretch="Uniform">
<Grid>
<..>Your controls, MediaElements, etc
<Grid>
</Viewbox>
You could also combine it (or entirely replace) with (e.g.) Grid Container : it gives you an ability to specify cell width and size usign star-syntax which is similair to html's percent syntax.
Another way is to use the DockPanel.
All-in-all there are plenty ways to achieve something similair and the way to go largely depends on the nuances of your particulair requirements.
Have a look at This tutorial to see a good overview of WPF containers and how to use them.
I am trying to remove the border of my WPF window in the design view/tab in Visual Studio. Please don't mistake this as a request to create a border less WPF window. I did that and it is working fine. What bothers me is that even if you have set WindowStyle = None, ResizeMode = NoResize, the design view/tab still shows a border around your window in the preview.
Is there a way to remove said border and have a 1:1 preview of the border less window as in Windows Forms?
Every question I have found in regards to this only asks how to remove the border of the actual application. I would like to remove it in the preview.
Any help would be very much appreciated :)
here is a screenshot of my problem:
This cannot be done as this is just how Visual Studio renders a window in design view (I think the frame is probably there so that you can distinguish when you are editing a Window rather than a UserControl).
Rather than try and find a solution to this I would ask myself if this is something I need to be spending time figuring out - after all you say that your program works correctly when being run. I think your time will be better spent writing code for your program rather than trying to play with the design time environment.
Update: In response to you comment, consider that the window frame will be different on every users machine depending on their operating system version (XP vs. Win7) or the theme the user has installed.
My computer has XP installed so the side borders are a lot thinner than those shown in design time so any content will be smaller (but only my a few pixels - 4 in my case; does your user interface design really depend on 4 pixels?).
When using a technology such as WPF you should not be designing your UI to fit to exact pixel sizes; you should be designing with min / max values or using layout containers that adjust to the size of the window as set by the user. Any regions in your UI (E.G. sidebar and main content) should be expressed as a ratio or percentage of one another; instead of saying "The side bar is 150 pixels wide and the main content area is 350 pixels wide" you should be saying "The side bar takes up a third of the window width and the main content takes two thirds".
Although the question is very old and have already been answered (kind of), I just realized: if you set WindowStyle="None", your undesired border is gone.
I'm sort-of just nit picking here, but maybe there's a simple solution which will save me some time.
When I'm drawing my Winforms GUI in the designer, controls snap to certain points. I can align the baseline of the text of one control to that of another, I can align the left and/or top of one control to another, etc. This is all great.
What's great too, is that the controls snap to other controls spaced with their margins. This means that if I'm making a vertical array of TextBoxes, then I can have them equidistant in my GUI - it looks less messy.
However not everything snaps correctly, or at all. Say I have put in my TextBoxes and now I wish to reduce the width of my form so that there is no white space between the edges of the TextBoxes and the edge of the form. Additionally, I want the distance between the edge of the TextBoxes and the edge of the Form to be the same on the left as it is on the right. If I drag the right edge of the form to the left, towards the TextBoxes it will not snap. I'm left with either calculations to work out what the width should be, or a juggling act to gradually reduce the width until the TextBox is snapping to both the left of the right.
I'm not saying this process is particularly difficult or time consuming. It's just that if it were to snap, the whole process would be infinitely easier.
Is there a built-in option in VS2010, or perhaps an extension? Or maybe I'm just doing it wrong in the first place?
The snap lines in the designer work perfectly when moving or resizing any of the built-in controls. The only time that they don't work is when you are resizing the form itself.
I agree that it would be extremely convenient to have snap lines here, as well. I wish I knew of a way to enable this. But unfortunately, I don't believe that there is one.
The workarounds are either to calculate the proper size mathematically, or guess at resizing the form then check your work by dragging one of the controls (and using the snap lines that appear). I go through the same "juggling act" that you describe on an unfortunately regular basis.
Whenever a control needs to be positioned so that it "snaps" to a form edge I usually move (or resize) the controls to the correct size first, and then change the controls "Anchor" property of those controls to be anchored to the corresponding form edge (even if the form itself won't be allowed to resize).
That way whenever I resize the form, the controls position relative to that form remains the same, simply resizing or moving the control as required (depending on the Anchor property chosen).
I completely agree that the ability to "snap" the form to controls when resizing the form would be extremely useful, but its normally possible to work-around using the anchor property in this way - the times when its doesn't work (such as when a form consists entirely of a column of text-boxes is a fixed height), I'm afraid you need to resort to calculations, but I find that most of my dialogs are resizable.
My developer's box has a screen resolution of 1680 x 1050. I'm developing a full-screen Silverlight 3 application that I'm considering deploying to the Internet. So, I want to make sure the application looks good on a variety of screen resolutions. I just started testing on other boxes, the first one having a screen resolution of 1024 x 768. During the test I found some of the pages on the application were partially truncated. It seems the controls on the page didn't adjust for the lower screen resolution. So, I'm looking for some tips on how to make a Silverlight application, to the extent possible, adjust for screen resolution. For example, are there things one should or should not do on XAML to make adapting to screen resolution easier? Should I just optimize for a minimum screen resolution? Your thoughts and suggestions are welcomed.
You can easily enforce a minimum acceptable resolution by setting the MinHeight and MinWidth properties of your root visual. (Of course, this should be less than the minimum screen resolution to account for browser chrome.)
Try to specify absolute Width and Height only when necessary: for example, for images or icons of fixed dimensions, or for obvious cases like TextBoxes (whose width should reflect the average length of the data entered).
Grid panels are excellent for mixing scalable and fixed layout areas. The star sizing specification takes a bit of getting used to--it's not as simple as a percentage-based proportioning--but it's much more flexible, especially in combination with row/column min/max dimensions.
You don't really need to test on multiple resolutions unless you're interested in testing a range of dots per inch--just resize the browser to approximate different screens. Since there's always a bit of give and take depending on the user's browser configuration, you'll have to account for some variance anyway.
You can make your application scale with the Silverlight Toolkit ViewBox or make it strech with layout controls like the Grid, StackPanel, and WrapPanel. Make your main UserControl have a Width and Height of Auto (or remove the width and height entirely) and the size of the app will resize to the size of the parent div (the default HTML template uses 100%x100%). Then just resize the browser accordingly. IE8 has developer tools that can help you see your app resized to specific screen resolutions.
Testing on a variety of screen resolutions is always a good idea.
I covered the resizing of elements and making it resolution independent on another thread.
You can have a look here, there are multiple ways to sizing and resizing things automatically.