I have a combobox defined as follows:
<ComboBox x:Name="cboDept" Grid.Row="0" Margin="8,8,8,8" HorizontalAlignment="Left" VerticalAlignment="Top" Width="120"
ItemsSource="{Binding Source={StaticResource cvsCategories}}">
<ComboBox.ItemTemplate>
<DataTemplate>
<StackPanel Orientation="Vertical" Width="Auto" Height="Auto">
<sdk:Label Content="{Binding CategoryID}" Height="20" />
<sdk:Label Content="{Binding CategoryName}" Height="20" />
</StackPanel>
</DataTemplate>
</ComboBox.ItemTemplate>
</ComboBox>
It works fine. However, once I select an item in the list, I want a different template to be applied to the combobox selected item being shown to the user (the item shown after the disappearance of popup). In the above case, I want only CategoryName to be displayed in the ComboBox once I select the respective item.
Can anyone let me know on how to achieve this?
thanks
What you need to do is create a ResourceDictionary containing a few defined templates yourself. In the below, ComboBoxTemplateOne and ComboBoxTeplateTwo are user controls that are set out to display the combobox in the manor you want.
<UserControl.Resources>
<ResourceDictionary>
<DataTemplate x:Key="TemplateOne">
<local:ComboBoxTemplateOne />
</DataTemplate>
<DataTemplate x:Key="TemplateTwo">
<local:ComboBoxTemplateTwo />
</DataTemplate>
</ResourceDictionary>
</UserControl.Resources>
You will then need to create your own class that inherits from ContentControl "DataTemplateSelector", overriding OnContentChanged
Protected Overrides Sub OnContentChanged(ByVal oldContent As Object, ByVal newContent As Object)
MyBase.OnContentChanged(oldContent, newContent)
Me.ContentTemplate = SelectTemplate(newContent, Me)
End Sub
You will then need to create another class that inherits from the above DataTemplateSelector which overrides SelectTemplate ("TemplateSelectorClass"), which will return the DataTemplate defined above ("TemplateOne" or "TemplateTwo").
Also in this derived class, you will need to define a property for each of the templates you have
Public Property ComboboxTemplateOne As DataTemplate
Then head back to your XAML and n the blow XAML
<local:TemplateSelectorClass ComboboxTemplateOne="{StaticResource TemplateOne}" Content="{Binding Path=ActiveWorkspace}>
This should work, as it is effectively doing the same work as setting the "DataTemplate" property in WPF (which doesn't exist in SilverLight)
I realise there are a fair few steps here and its quite fiddly, but hopefully this will get you there. Any questions just shout.
Related
I check those articles about doing DataTemplate :
WPF DataTemplate Binding
WPF DataTemplate and Binding
WPF DataTemplate Textblock binding
and thoses about DataTemplate depending on property type :
WPF DataTemplate Binding depending on the type of a property
Dynamically display a control depending on bound property using WPF
I'm trying to display a property with different controls depending of the property value. I have this Xaml that is partialy working. I have 2 problems :
The property is displaying with the right control, but when I set the value it doesn't go back to the property. Means the "set" of My property is not call (but was before I creates the DataTemplate). I detect that the problem about setting the property is about the ="{Binding Path=.}" but I cannot find the solution to set it otherwise.
Also To be able to make it work, I had to "isolate" the Value into a single ViewModel so that the DataTemplate doesn't affect all the other control.
Can you help me find betters solutions to resolves those 2 problems?
Here is the xaml code of my View linked with MyContainerViewModel that has a "ChangingDataType" :
<UserControl >
<UserControl.Resources>
<!-- DataTemplate for strings -->
<DataTemplate DataType="{x:Type sys:String}">
<TextBox Text="{Binding Path=.}" HorizontalAlignment="Stretch"/>
</DataTemplate>
<!-- DataTemplate for bool -->
<DataTemplate DataType="{x:Type sys:Boolean}">
<CheckBox IsChecked="{Binding Path=.}" />
</DataTemplate>
<!-- DataTemplate for Int32 -->
<DataTemplate DataType="{x:Type sys:Int32}">
<dxe:TextEdit Text="{Binding Path=.}" MinWidth="50" Mask="d" MaskType="Numeric" HorizontalAlignment="Stretch"/>
<!--<Slider Maximum="100" Minimum="0" Value="{Binding Path=.}" Width="100" />-->
</DataTemplate>
<!-- DataTemplate for decimals -->
<DataTemplate DataType="{x:Type sys:Decimal}">
<!-- <TextBox Text="{Binding Path=.}" MinWidth="50" HorizontalAlignment="Stretch" />-->
<dxe:TextEdit Text="{Binding Path=.}" MinWidth="50" Mask="f" MaskType="Numeric" HorizontalAlignment="Stretch" />
</DataTemplate>
<!-- DataTemplate for DateTimes -->
<DataTemplate DataType="{x:Type sys:DateTime}">
<DataTemplate.Resources>
<DataTemplate DataType="{x:Type sys:String}">
<TextBlock Text="{Binding Path=.}"/>
</DataTemplate>
</DataTemplate.Resources>
<DatePicker SelectedDate="{Binding Path=.}" HorizontalAlignment="Stretch"/>
</DataTemplate>
</UserControl.Resources>
<ContentPresenter Content="{Binding MyChangingPropery}"/>
</UserControl>
More informations about 2 :
I wanted to have in a view a label and a property that changes depending of the object. Something like this :
<UserControl>
<UserControl.Resources>
<!-- ...DataTemplate here... -->
</UserControl.Resources>
<StackPanel>
<Label Content="Allo"/>
<ContentPresenter Content="{Binding MyChangingPropery}"/>
</StackPanel>
</UserControl>
But if I put the DataTemplate on this UserControl resources, it will also affect the Label "allo". So I had to create another view that contains the DataTemplate and MyChangingProperty so that the label Allo would not be affected. But the extra View created just for one property is kind of ugly to me, I'm sure there is a better way to isolate the DataTemplate so it can apply only to one UIControl.
<UserControl >
<StackPanel>
<Label Content="Allo"/>
<ContentPresenter Content="{Binding MyContainerViewModel}"/>
</StackPanel>
</UserControl>
Note : MyContainerViewModel here is linked with the first view described.
Thanks in advance!
One possible solution would be to use a DataTemplateSelector. You cannot bind primitive types using two way bindings because that would have to be somehow by reference via the DataTemplate which I think is not supported by WPF.
The DataTemplateSelector now selects the right DataTemplate based on the property type and searches for the right DataTemplate in the resources by name. This also solves your problem that your DataTemplates interacted with the Label.
So first you need to define a DataTemplateSelector that changes the DataTemplate based on the type of the property:
public class MyDataTemplateSelector : DataTemplateSelector
{
public override DataTemplate SelectTemplate(object item, DependencyObject container)
{
var fe = (FrameworkElement)container;
var prop = (item as MyViewModelType)?.MyChangingProperty;
if (prop is string)
return fe.FindResource("MyStringDT") as DataTemplate;
else if (prop is bool)
return fe.FindResource("MyBoolDT") as DataTemplate;
// More types...
return base.SelectTemplate(item, container);
}
}
Then you need to change the UserControl like this:
<UserControl>
<UserControl.Resources>
<local:MyDataTemplateSelector x:Key="MyDTSelector" />
<!-- DataTemplate for strings -->
<DataTemplate x:Key="MyStringDT">
<TextBox Text="{Binding MyChangingProperty, Mode=TwoWay}"
HorizontalAlignment="Stretch"/>
</DataTemplate>
<!-- DataTemplate for bool -->
<DataTemplate x:Key="MyBoolDT">
<CheckBox IsChecked="{Binding MyChangingProperty, Mode=TwoWay}" />
<!-- More DataTemplates... -->
</DataTemplate>
</UserControl.Resources>
<StackPanel>
<Label Content="Allo"/>
<ContentPresenter Content="{Binding MyContainerViewModel}"
ContentTemplateSelector="{StaticResource MyDTSelector}" />
</StackPanel>
</UserControl>
You can find a bit more information regarding the DataTemplateSelector here.
You can of course also set a DataType on this new DataTemplates but it isn't required because the x:Key makes them unique anyway. But if you want then it has to look like this:
<DataTemplate x:Key="MyStringDT" DataType="{x:Type local:MyViewModelType}">
In my opinion, the previously posted answer is overkill. While a DateTemplateSelector is a useful thing to know about, it seems unnecessary to me in this scenario.
But if I put the DataTemplate on this UserControl resources, it will also affect the Label "allo".
The reason it affects the Label object is that the Label object is a ContentControl, and so does the same template-matching behavior for content types as your own ContentPresenter element does. And you've set the content of the Label object to a string value. But you can put anything you want as the content for it.
The way to fix the undesired effect is to intercept that behavior by changing the content from a string object to an explicit TextBlock (the control in the template that a string object normally gets assigned). For example:
<UserControl>
<UserControl.Resources>
<!-- ...DataTemplate here... -->
</UserControl.Resources>
<StackPanel>
<Label>
<TextBlock Text="Allo"/>
</Label>
<ContentPresenter Content="{Binding MyChangingPropery}"/>
</StackPanel>
</UserControl>
In that way, you bypass the template-finding behavior (since TextBlock doesn't map to any template and can be used directly), and the content for the Label will just be the TextBlock with the text you want.
This seems like a lot simpler way to fix the issue, than either to create a whole new view or to add a DataTemplateSelector.
I'm currently using the following itemscontrol and datatemplate:
<UserControl.Resources>
<DataTemplate x:Key="OrdersTemplate">
<dxlc:LayoutItem Label="CustomerReference" LabelPosition="Top" MaxWidth="300" HorizontalAlignment="Left" Width="300">
<dxe:TextEdit IsEnabled="True" Text="{Binding Path=CustomerReference}" />
</dxlc:LayoutItem>
</DataTemplate>
</UserControl.Resources>
<HeaderedContentControl Header="Steps">
<ItemsControl ItemsSource="{Binding Orders}" ItemTemplate="{StaticResource OrdersTemplate}"/>
</HeaderedContentControl>
The source is just a list with entities.
The problem is that the "CustomerReference" of every object from my source changes when I change it in the textbox. Whats missing here?
Greets
I think in your view model you have added the same object more than once. Instead of creating new object when ever you added to the collection. So when you want to add a object to collection create a new object and add it
I have the following MainWindow that lays out a left side navigation panel and a right side display area (both of these are UserControls).
Can someone explain how to assign the DataContext of the navigation panel (LinksView.xaml) to that of LinksViewModel.cs. I would like to bind a Command (BtnCompanyClickCommand) to the button and define BtnCompanyClickCommand in LinksViewModel.cs.
I have tried various methods that I found on StackOVerflow to set the DataContext but none of these solutions seem to work (binding RelativeSource, naming view and binding to name, etc.).
MainWindow.xaml
<StackPanel Orientation="Horizontal">
<vw:LinksView DataContext="{Binding RelativeSource={RelativeSource Self}}"/>
<ContentControl Content="{Binding CurrentUserControl}" />
</StackPanel>
LinksView.xaml
<StackPanel Orientation="Vertical">
<Button Content="Company" Width="75" Margin="3" Command="{Binding ElementName=Links,Path=BtnCompanyClickCommand}" />
</StackPanel>
FormsDictionary.xaml
<ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:vm="clr-namespace:SidekickAdmin.ViewModel"
xmlns:vw="clr-namespace:SidekickAdmin.View">
<DataTemplate DataType="{x:Type vm:CompanySummaryViewModel}">
<vw:CompanySummaryView>
<ContentControl Content="{Binding }" />
</vw:CompanySummaryView>
</DataTemplate>
<DataTemplate DataType="{x:Type vm:LinksViewModel}">
<vw:LinksView />
</DataTemplate>
</ResourceDictionary>
EDIT
So I finally came across this explanation of how to set the DataContext of a UserControl which has to be done on the first child item of the UserControl.
Here is the modified LinksView.xaml that works.
<StackPanel Orientation="Vertical">
<StackPanel.DataContext>
<vm:LinksViewModel /> <!-- Bind the items in StackPanel to LinksViewModel -->
</StackPanel.DataContext>
<Button Content="Company" Width="75" Margin="3" Command="{Binding BtnCompanyClickCommand}" />
</StackPanel>
However, I am still not clear on why I have to set the DataContext of the child element and not the UserControl and why the DataTemplate for LinksView (set in FormsDictionary.xaml) doesn't tie into the DataContext of LinksViewModel. Any explanation would be appreciated.
First you have to refer to your DataContext (LinksViewModel.cs) in your XAML code.
You can do that either by directly instantiating it or use a ResourceDictionary. In the latter case you instantiate your DataConext either inside some .cs file or inside the ResourceDictionary .xaml file and store it in a named ResourceDictionary where you can find the reference later.
Second you simply have to associate the DataContext property of a View element like your LinksView.xaml with the corresponding DataContext.
This is pretty high-level and without any code but that's the basic idea behind it.
there should be an instance of LinksViewModel in MainWindowViewModel:
MainWindowViewModel.cs:
class MainWindowViewModel
{
public MainWindowViewModel()
{
LinksVM = new LinksViewModel();
}
public LinksViewModel LinksVM { get; private set; }
}
MainWindow.xaml
<StackPanel Orientation="Horizontal">
<vw:LinksView DataContext="{Binding LinksVM}"/>
<ContentControl Content="{Binding CurrentUserControl}" />
</StackPanel>
LinksView.xaml
<StackPanel Orientation="Vertical">
<Button Content="Company" Width="75" Margin="3" Command="{Binding BtnCompanyClickCommand}" />
</StackPanel>
since LinksView is explicitly created in MainWindow, there is no need in DataTemplate - it can be removed
<DataTemplate DataType="{x:Type vm:LinksViewModel}">
<vw:LinksView />
</DataTemplate>
How can I specify datasource for a user control:
<ScrollViewer VerticalScrollBarVisibility="Visible" VerticalAlignment="Stretch">
<ListBox ItemsSource="{Binding}">
<ListBox.ItemTemplate>
<DataTemplate>
<local:ucMyControl />
</DataTemplate>
</ListBox.ItemTemplate>
</ListBox>
</ScrollViewer>
How ucMyControl know what values to take? I realize that lisbox will create as many ucMyControls as there are items in bondong collection?
Also, scrollviewers don't work - I can't get to 3rd control (they are all empty anyway, but I hope you'll give me leads how to bind it).
The control that is instantiated from an ItemTemplate in an ItemsControls (e.g. ListBox) has its DataContext property automatically set to the appropriate item from the Items or ItemsSource collection of the ItemsControl.
So if you for example have a collection of Person objects with properties FirstName and LastName as ListBox items you can bind like this in your UserControl:
<UserControl ...>
<StackPanel>
<TextBlock Text="{Binding Path=FirstName}"/>
<TextBlock Text="{Binding Path=LastName}"/>
</StackPanel>
</UserControl>
You do not need to set the DataContext property explicitly.
I've modified my question since it has changed focus when trying things out.
I narrowed the problem down to the following...
I try to bind the selected Item of a TreeView to a StackPanel (or some other container that can hold User Controls). This container will then display a UserControl, depending on the type of the selected item.
Here is the xaml of the StackPanel (both treeview and stackpanel are in the same window ==> different grid column)
<StackPanel Grid.Column="2" MinWidth="500" DataContext="{Binding ElementName=myTree, Path=SelectedItem, Mode=OneWay}">
<StackPanel.Resources>
<DataTemplate DataType="{x:Type mvTypes:MyTypeA}">
<controls:UserControlA DataContext="{Binding}" />
</DataTemplate>
<DataTemplate DataType="{x:Type mvTypes:MyTypeB}">
<controls:UserControlB DataContext="{Binding}" />
</DataTemplate>
</StackPanel.Resources>
</StackPanel>
When I place a user control directly under the stackpanel (not in the resources), it displays it with the selected object as their datacontext.
Idem if I place a TextBox in it, it will show the correct type of the selected item.
<TextBox Name="textBox1" Text="{Binding}" />
For some reason, placing it within a DataTemplate (even without setting the DataType) results in nothing to display.
Any sugestions. I'm thinking that maybe a StackPanel is not the right control for this, though I can't seem to find other controls that look suitable as containers like this.
Thanks in advance.
Replace the StackPanel in your example with ContentPresenter and instead of DataContext set the Content property. That should work.
Although you have set the Binding on the second custom control, are you setting the DataContext, as the binding is the route to the information and the DataContext is the information it applies this binding information to.
Andrew
You can create a UserControl to display the TreeView and the selection info on the right, all in one. It saves you from creating any custom control. A custom control is basically unnecessary since you do not create anything which didn't exist before.
<UserControl x:Class="NameSpace.SelectionView"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:controls="namespace.Controls"
Height="300" Width="300">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition/>
<ColumnDefinition/>
</Grid.ColumnDefinitions>
<TreeView Name="customTree">
<!--Items go here-->
</TreeView>
<StackPanel Grid.Column="1" MinWidth="50" DataContext="{Binding ElementName=customTree, Path=SelectedItem, Mode=OneWay}">
<StackPanel.Resources>
<DataTemplate DataType="{x:Type StylingTest:CustomViewModelA}">
<controls:CustomADetailsControl />
</DataTemplate>
<DataTemplate DataType="{x:Type StylingTest:CustomViewModelB}">
<controls:CustomBDetailsControl />
</DataTemplate>
</StackPanel.Resources>
<TextBlock Text="{Binding}"/>
</StackPanel>
</Grid>
</UserControl>
Any other custom behaviour, I'm sure you could create or set in styles/templates here.
Also, you might find one of my other answers useful.
Good luck with wpf, cheers.