Fresh installation of Apache on debian - apache2

I want to remove the apache that is previously installed.
and want to install a fresh copy.How can I do that? I need clear documentation for the installation because after googling i am not getting that.
Thanks

If you use aptitude remove the configuration files will not be removed. To remove these as well do:
aptitude purge apache2
Then just install again:
aptitude install apache2
Hope it helps!

Related

Oracle JDK 11 error occuring every time, I install anything in terminal

Below is the Error message I get every time I install anything in the terminal . Its kinda stuck there for a while.
I tried no. of solutions from StackOverflow but nothing worked.
Before installing this package,
please download the Oracle JDK 11 .tar.gz file
with the same version as this package (version 11.0.4),
and place it in /var/cache/oracle-jdk11-installer-local,
E.g.:
sudo mkdir -p /var/cache/oracle-jdk11-installer-local
sudo cp jdk-11.0.4_linux-x64_bin.tar.gz /var/cache/oracle-jdk11-installer-local/
sha256sum mismatch jdk-11.0.4_linux-x64_bin.tar.gz
Oracle JDK 11 is NOT installed.
dpkg: error processing package oracle-java11-installer-local (--configure):
installed oracle-java11-installer-local package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
oracle-java11-installer-local
E: Sub-process /usr/bin/dpkg returned an error code (1)
Doesn't show up again.
Remove the package oracle-java11-installer-local. You can do this in following way:
sudo apt remove oracle-java11-installer-local
found this solution:
sudo rm /var/lib/dpkg/info/oracle-java11-installer-local.postinst
at this site.
You need to download the folder of the Oracle JDK 11 on here https://www.oracle.com/java/technologies/javase-jdk11-downloads.html
After download the tar.gz file. Move to your folder location then copy the file by using this command
sudo cp jdk-11.0.6_linux-x64_bin.tar.gz /var/cache/oracle-jdk11-installer-local/
don't forget to check your file name! After that repeat again by typing
sudo apt-get install oracle-java11-installer-local
and you can check your java version after that by typing
java -version
Hello,
I've had the same issue.
When you try to run sudo apt update && sudo apt upgrade it will automatically try to update the Java if a newer version is available. In my case let's say from 11.0.4 -> 11.0.5.
If you add the JDK from Oracle (after download) to /var/cache/oracle-jdk11-installer-local/ it should work.
You don't have to uninstall it...(I mean the oracle-jdk11-installer-local, it works just fine).
Please let me know if you still have this issue.
I had the same issue. My solution was to download jdk-11.0.5_linux-x64_bin.tar.gz and copied it to /var/cache/oracle-jdk11-installer-local.
In console shell, type:
sudo apt update && sudo apt upgrade
After a long search: this solved it for me.
The checksum made the issues for me. Try:
sudo rm /var/lib/dpkg/info/oracle-java11-installer-local.postinst -f
Navigating to the directory var/cache and doing "sudo rmdir oracle-jdk11-installer-local/" worked for me.
sudo rmdir oracle-jdk11-installer-local/
I have managed to resolve the issue by doing this:
modify /var/lib/dpkg/info/oracle-java11-installer-local.postinst
Change the checkSum. take from oracle website check sum for 11.0.15.1
3. change the version in 2 places
4. save and update apt
5. then sudo apt install oracle-java11-installer-local
this worked for me

error: import pychart , during install source code odoo 9.0

I wrote so many thing in requirements.txt and reinstalled but it didn't work out. I installed odoo 9.0 source code for windows. The command prompt is showing error:
from pychart import *
What do I need to write in requirements.txt for pychart?
As i just ran into the same problem unrelated to odoo.
The following command solved it for me:
pip install Python-Chart
To install the python packages for odoo you can use below command found from this detailed odoo install guide
cd /tmp && wget https://raw.githubusercontent.com/odoo/odoo/9.0/requirements.txt && sudo pip install -r requirements.txt
It will install all the python dependacy in just one command.
Hope this helps.
You have to install that package before you use that, If are on ubuntu command is pip install pychart and if you are on windows the command is c:\Python27\Scripts\pip.exe install pychart.I assume you have installed python on default folder c drive.
Why don't you create a module like install_module and on depends you can add required list of module to install. If you install that module it'll automatically install all depended module. I'm using this same. Instead of command prompt it'll be quite easy too. You can view the depends module list in Technical Data of that install_modules.
I Hope it'll be helpful.

CakePHP 3.0 installation: intl extension missing from system

Using the CakePHP docs, I am trying to install 3.0-beta2 using composer but I got this error:
cakephp/cakephp 3.0.x-dev requires ext-intl * -> the requested PHP extension intl is missing from your system
However, I know for sure that intl is installed (it shows on phpinfo). I'm using PHP 5.4.33/Apache 2.4.10.1
I faced the same problem today. You need to enable the intl PHP extension in your PHP configuration (.ini).
Solution Xampp (Windows)
Open /xampp/php/php.ini
Change ;extension=php_intl.dll to extension=php_intl.dll (remove the semicolon)
Copy all the /xampp/php/ic*.dll files to /xampp/apache/bin
Restart apache in the Xampp control panel
Solution Linux (thanks to Annamalai Somasundaram)
Install the php5-intl extension sudo apt-get install php5-intl
1.1. Alternatively use sudo yum install php5-intl if you are on CentOS or Fedora.
Restart apache sudo service apache2 restart
Solution Mac/OSX (homebrew) (thanks to deizel)
Install the php5-intl extension brew install php56-intl
If you get No available formula for php56-intl follow these instructions.
Restart apache sudo apachectl restart
Eventually you can run composer install to check if it's working. It will give an error if it's not.
I faced the same issue in ubuntu 12.04
Installed: sudo apt-get install php5-intl
Restarted the Apache: sudo service apache2 restart
OS X Homebrew (May 2015):
The intl extension has been removed from the main php5x formulas, so you no longer compile with the --enable-intl flag.
If you can't find the new package:
$ brew install php56-intl
Error: No available formula for php56-intl
Follow these instructions: https://github.com/Homebrew/homebrew-php/issues/1701
$ brew install php56-intl
==> Installing php56-intl from homebrew/homebrew-php
When using MAMP
1 Go to terminal
vim ~/.bash_profile
i
export PATH=/Applications/MAMP/bin/php/php5.6.2/bin:$PATH
Change php5.6.2 to the php version you use with MAMP
Hit ESC,
Type :wq,
hit Enter
source ~/.bash_profile
which php
2 Install Mac Ports
https://www.macports.org/install.php
sudo port install php5-intl OR sudo port install php53-intl
cp /opt/local/lib/php/extensions/no-debug-non-zts-20090626/intl.so /Applications/MAMP/bin/php5.3/lib/php/extensions/no-debug-non-zts-20090626/
{take a good look at the folder names that u use the right ones}
3 Add extension
Now, add the extension to your php.ini file:
extension=intl.so
Usefull Link:
https://gist.github.com/irazasyed/5987693
The error message clearly states what the problem is. You need the intl extension installed.
Step 1: install PHP intl you comfortable version
$sudo apt-get install php-intl
step 2:
For XAMPP Server intl extension is already installed, you need to enable this extension to uncomment below the line in your php.ini file. Php.ini file is located at c:\xampp\php\php.ini or where you have installed XAMPP.
Before uncomment:
;extension=php_intl.dll ;extension=php_mbstring.dll
After uncommenting:
extension=php_intl.dll extension=php_mbstring.dll
Short answer: activate intl extension in php_cli.ini. Thanks to #ndm for his input.
If you are using latest version Ubuntu 16.04 or later just do
sudo apt-get install php-intl
Then restart your apache
sudo service apache2 restart
In my case I was not actually trying to run cakephp locally, I was just trying to get it to auto update locally using composer (because I am playing with writing plugins that you install with composer). Since I don't actually even run it locally I could simply ignore requirements by adding the --ignore-platform-reqs flag.
php composer.phar update --ignore-platform-reqs
In my case, my running php version is 7.1.x on mac OSX .
I installed intl command using brew install php71-intl.
Placing extension=intl.so inside php.ini was no effect at all. Finally i looked for extension installed directory and there i saw intl.so and placed that path (extension=/usr/local/Cellar/php71-intl/7.1.11_20/intl.so) to my php.ini file and it solved my problem.
In my case (xampp PHP 8.0)
Find ;extension=intl in /xampp/php/php.ini
Remove ; and Restart Apache
MAKE this
In XAMPP, intl extension is included but you have to uncomment extension=php_intl.dll in php.ini and restart the server through the XAMPP Control Panel.
In WAMP, the intl extension is “activated” by default but not working. To make it work you have to go to php folder (by default) C:\wamp\bin\php\php{version}, copy all the files that looks like icu*.dll and paste them into the apache bin directory C:\wamp\bin\apache\apache{version}\bin. Then restart all services and it should be OK.
if you use XAMPP do this
1. turn off XAMPP
2. Modifed the php.ini is located in c/:xampp/php/php.ini
3. intl extension is included but you have to uncomment extension=php_intl.dll in php.ini and restart the server through the XAMPP Control Panel.
For Ubuntu terminal:
Please follow the steps:
Step-1:
cd ~
Step -2: Run the following commands
sudo apt-get install php5-intl
Step -3: You then need to restart Apache
sudo service apache2 restart
For Windows(XAMPP) :
Find the Php.ini file:
/xampp/php/php.ini
Update the php.ini file with remove (;) semi colon like mentioned below:
;extension=php_intl.dll to extension=php_intl.dll
and save the php.ini file.
After that you need to
Restart the xampp using xampp control.
Intl Means :Internationalization extension which enables programmers to perform UCA-conformant collation and number,currency,date,time formatting in PHP scripts.
To enable PHP Intl with PECL can be used.
pecl install intl
On a plain RHEL/CentOS/Fedora, PHP Intl can be install using yum
yum install php-intl
On Ubuntu, PHP Intl can be install using apt-get
apt-get install php5-intl
Restart Apache service for the changes to take effect.
That's it
For those who get Package not found error try sudo apt-get install php7-intl then run composer install in your project directory.
I had the same problem in windows
The error was that I had installed several versions of PHP and the Environment Variables were routing to wrong Path of php see image example
I'm using Mac OS High Sierra and none of these worked for me. But after searching a lot I found one that worked!
This may seem trivial, but in fact about 2 months ago some clever guys made changes in brew repository, so doing just: brew install php71-intl will show you error with message that such recipe doesn’t exists.
Fortunately, there is. There is temporary fix in another brew repo, so all you have to do is:
brew tap kyslik/homebrew-php
brew install kyslik/php/php71-intl
SOURCE: http://blastar.biz/2018/04/14/how-to-enable-php-intl-extension-for-php-7-1-using-xampp-on-macos-high-sierra/
I use Linux Ubuntu 20, you can try this:
Check php installed modules:
php -m | grep intl
If there are no result(s) from this command, you should just go ahead and install the module:
sudo apt-get install php7.4-intl
you will need to change *php7.4 to your desired php version.
you should restart apache when you're done:
sudo service apache2 restart

Installation of ROS imu_tools Package

I am trying to install imu_tools package into rosdep in ubuntu. After I set the ROS_PACKAGE_PATH, it says "Missing Resources cmake_modules". Does that mean I have to get the directory of cmake and include it in the ROS_PACKAGE_PATH? Is there anything else that I need to do to make it work?
sudo apt-get install ros-<your_ros_distro>-cmake-modules
solved it for me

How can I uninstall an apache2 module?

It looks like I installed the wrong version of the module using apxs2.
Once it's disabled (a2dismod), how do I remove it so I can install the correct version?
Seems elementary, yet...somehow...I'm finding nothing on Google, IRC, etc.
It's so simple nobody has written it down yet. You just remove the .so file from /usr/lib/apache2/modules/.
And if you want to be thorough, remove anything that might be in: /usr/share/doc/module-name
For some modules on Ubuntu you can use apt-get.
To find the installed module sudo dpkg -l | grep apache.
To remove sudo apt-get purge {module_name}.
For example:
sudo apt-get purge libapache2-mod-php7.0 libapache2-mod-php5
The apache modules can be found in
/usr/lib64/apache2
or
/usr/lib64/httpd

Resources