I have a report which displays customer address in multiple labels.
My customers use windowed envelopes for mailing. I need the address labels position to be configurable.
Something like, I'll have a database table which stores the Top/Left position of each label per customer. Based on this table, I need to position the address labels on my report.
I thought, it is doable by expressions, but Location property doesn't provides ability to set an expression and make the label's top and left dynamic.
Anybody, any ideas, on how to achieve this?
As you mentioned, you cannot set an expression for location property. I want to do this before but it seems that there is no solution for this work.
Sorry for the duplicate post
I had the same problem as you did. I got around the problem by using an old HTML trick. It involves using a transparent.gif in an image. You put your image (linked to the gif), then put your label on top. Using a parameter, you can toggle which item to appear by setting an expression in the hidden property for both controls.
As stated by others, it isn't supported. However, here are two ugly work around possible for basic reporting.
Work around with padding.
You can't set formula on the label's location, but you can use padding option instead.
So you can set the label as wide as the report and as tall as the region.
Also, set the label's horizontal alignment to "Left" and Vertical alignment to "Top".
Then, add a formula in left and top paddings to offset the text.
You can also achieve a right aligned offsetted label by setting the Horizontal alignment to "right" and using right padding instead of the left one to offset the field from the right. With the same recipe, you can offset from the bottom by using "bottom" vertical alignment and bottom padding.
The ugly side:
This method will create a mess in the report designer as all dynamic label will overlap each other and take all the space over static label. Also, please note that with this method, you won't be able to do fancy stuff like adding borders around the text and hyperlinks.
Work around with sub report.
If the number of different positions for the label(s) are really low. You can create a subreport for each possibility and use a formula to display the right subreport for the right case. Sadly, this doesn't work for labels in the header as subreport aren't allowed there.
No solution, as it is not supported!!!
From MS online community support...
"As far as I know, the position of the textbox in the report is static not dynamic, so it will not shift to left."
Reference: http://forums.asp.net/t/1433297.aspx
Related
I have a list of "Group" objects, each of which contains a list of "Option" objects, that show up as checkboxes. I want these to be displayed in a condensed fashion automatically without me having to layout the UI manually with something such as a Grid (which is what I've done in the past, and takes a lot of effort).
My groups have varying numbers of options, so the size of the container for the group is not the same across groups. I'm using a WrapPanel, but it leads to a fairly ugly design because each item in the WrapPanel appears to be slotted into the same size container:
I know I've done this in HTML/CSS/JS, where I can have it automatically condense the unused space. Is there something like this for WPF? My list of options is manually created, but I can add/remove options fairly easily in my code, so I would rather not have to manually recalculate things in a grid view.
I've looked at Is there any way to occupy blank space in WrapPanel automatically?, which sounds similar, but the answer to that question does not have an example and I could not figure out what I was actually supposed to change/use in the answer (my attempts using it did not make any difference at all to layout).
I guess you use Horizontal Orientation of WrapPanel, so every row have height as the maximum its element. Your problem isn't free space in the ends of rows, so the solution that you mentioned doesn't work for you. You can try to use Vertical orientation of WrapPanel, your wrappanel' elements look like they have similar width, possible it would look better.
Beginner in Visual Studio here.
I'm trying to create an C# Windows Form application that simply displays a form to show some information about the local system.
I have created this form with the help of the VS designer:
As you can see, it consists of a simple panel with a PictureBox at the top, a label below it (both centered), three table layouts next to each other, and a button at the bottom. Never mind the label texts.
The rows of all the table layouts are set to absolute, this is because I want to programatically add rows to the end middle and right table layout if there are more than one local IP address in the computer and setting the rows to auto size or percentage would make alignment difficult if more rows are added.
Now, my problem is that I can't figure out how to make the form resize and move the controls (specifically move the 'OK' button down) when more rows are added.
I have tried anchoring the button to the bottom edge of the form as well as the bottom of the middle table, both produce the same result: the button stays where it is and the new rows overlap it, like this
I would also like to know how to have the form resize to fit the contents of the labels. For example, if the text in one of the labels inside the layout is bigger than the column width, I'd like to have the form grow to accommodate it. Likewise, I'd like the form to shrink to fit the largest text.
I realize that this may not be the most efficient or easiest way to create this particular form, but it is what I've come up with, I of course welcome any suggestions in that regard. It is important to maintain alignment between the rows of all table layouts.
Thanks in advance.
Use a data grid and add controls to it if an add button is pressed. You can scroll through the rows so you won't need to adjust the height of the form
I am building a form which contains two forms adjacent to each other. Hence I used PanelGridLayout and placed two panelFormLayout in each 50% width gridCell of first gridRow of a PanelGridLayout. This works perfect with respect to alignment but in a smaller resolution both the gridcell's are overlapping and the fields of left form are overlapping with the labels of the right form.
How can I resolve this issue?
Any ideas on which layouts I can use?
What would you expect it to do in such a case where there is basically not enough space to show the fields in one of the sides?
ADF won't automatically shrink or eliminate fields in such a case.
Acc to the Geometry Management of <af:gridCell>
Beware that if you attempt to use width="auto", halign="center", halign="end" in conjunction with cell content that uses unstable, percentage-based widths, you may experience different results in different browsers. If you wish to use these settings, be sure to constraint the width of that cell content.
Possible Workaround
instead of halign="end" change it to halign="stretch"
source : https://docs.oracle.com/cd/E35521_01/apirefs.111230/e17491/tagdoc/af_gridCell.html
I am using www.responsivegridsystem.com for my columns and here is what I've come up with: ux.stoicdigital.com/#intro-message.
I'd like the list to work like this one: http://doyouimpress.com/#uses-list
The biggest problems are that, above a certain amount of px (can't remember exact), the three column grid is centered, but doesn't LOOK centered due to cell widths, etc. and that below that amount of px (when list is in one-column mode), the off-center problem is even worse.
Again, I realize that this has to do with cell widths, etc. but I can't figure out where to make the changes I need to do the following at both sizes:
Align text and bullets left
Center the list itself on the page
Any advice would be appreciated. Would especially appreciate any details you can give re: changes to make to CSS.
PS: If there is another way to achieve this outside of Responsive Grid System, I'm open to that too.
The text doesn't look centered because it isn't. The container div is centered, but since you align the text to the left its all scewed to the left, just like it'd be scewed to the right if you aligned the text to the right.
You could align the text to the middle, but then your checkbox icons wouldn't be lined up. If you want the text to be centered but still have the icons lined up you need to attach the icons so something else but the text. You could display them as pseudo-elements to the <li>, but the drawback is that there would be varying amounts of space between the text and the icons.
What I'm coming at is basically that you can't center the columns this way (as long as you don't make sure that the text in each <li> is equally wide) - however you can fake it and that's what they do on that site you're referring to.
To fake it, simply give each column div a unique class name (or target them with :nth-child), then move each column manually to make it look like the content is centered. You could give them different width-values (this is what they do in your example), different padding-values or similar. That's entirely up to you.
As for the one-column layout, do something similar where you add a padding-value to push them closer to the center, but obviously use the same value for all column divs.
I'm sort-of just nit picking here, but maybe there's a simple solution which will save me some time.
When I'm drawing my Winforms GUI in the designer, controls snap to certain points. I can align the baseline of the text of one control to that of another, I can align the left and/or top of one control to another, etc. This is all great.
What's great too, is that the controls snap to other controls spaced with their margins. This means that if I'm making a vertical array of TextBoxes, then I can have them equidistant in my GUI - it looks less messy.
However not everything snaps correctly, or at all. Say I have put in my TextBoxes and now I wish to reduce the width of my form so that there is no white space between the edges of the TextBoxes and the edge of the form. Additionally, I want the distance between the edge of the TextBoxes and the edge of the Form to be the same on the left as it is on the right. If I drag the right edge of the form to the left, towards the TextBoxes it will not snap. I'm left with either calculations to work out what the width should be, or a juggling act to gradually reduce the width until the TextBox is snapping to both the left of the right.
I'm not saying this process is particularly difficult or time consuming. It's just that if it were to snap, the whole process would be infinitely easier.
Is there a built-in option in VS2010, or perhaps an extension? Or maybe I'm just doing it wrong in the first place?
The snap lines in the designer work perfectly when moving or resizing any of the built-in controls. The only time that they don't work is when you are resizing the form itself.
I agree that it would be extremely convenient to have snap lines here, as well. I wish I knew of a way to enable this. But unfortunately, I don't believe that there is one.
The workarounds are either to calculate the proper size mathematically, or guess at resizing the form then check your work by dragging one of the controls (and using the snap lines that appear). I go through the same "juggling act" that you describe on an unfortunately regular basis.
Whenever a control needs to be positioned so that it "snaps" to a form edge I usually move (or resize) the controls to the correct size first, and then change the controls "Anchor" property of those controls to be anchored to the corresponding form edge (even if the form itself won't be allowed to resize).
That way whenever I resize the form, the controls position relative to that form remains the same, simply resizing or moving the control as required (depending on the Anchor property chosen).
I completely agree that the ability to "snap" the form to controls when resizing the form would be extremely useful, but its normally possible to work-around using the anchor property in this way - the times when its doesn't work (such as when a form consists entirely of a column of text-boxes is a fixed height), I'm afraid you need to resort to calculations, but I find that most of my dialogs are resizable.