I'm trying to open a simple .rtf file called test in C. I'm using Xcode. My code is:
#include <stdio.h>
#include <stdlib.h>
int main (int argc, const char * argv[]) {
FILE *filePtr;
filePtr = fopen("test.rtf", "r");
if (filePtr == NULL) {
fprintf(stderr, "Can't open \"test\"\n");
exit(EXIT_FAILURE);
}
else {
printf("File open successful\n");
int x;
/* read one character at a time until EOF is reached */
while ((x = fgetc(filePtr)) != EOF) {
printf("%c", x);
}
}
fclose(filePtr);
return 0;
}
I have the test.rtf file in the same directory as my Xcode.proj directory. My output is "File open successful", however I do not get anything read from the file. Am I doing this right? Thanks.
There's nothing wrong with that code at all. I tested it (albeit not in Xcode) with a file and the transcript was:
pax> echo hello >test.rtf
pax> ./qq.exe
File open successful
hello
So the obvious think to ask is what happens when you examine test.rtf? Does it actually have any content? Because, when I do:
pax> rm test.rtf ; touch test.rtf
pax> ./qq.exe
File open successful
I get the same behaviour you observe.
Also try renaming it to test2.rtf temporarily and make sure you get the error. It's possible it may be opening a different copy of the file than what you think (this often happens in Visual C since the directory the program runs in is not always what developers think at first).
It looks right.
As for the lack of output, two possibilities:
Are you sure the file has some content? Maybe ls -l test.rtf or dir test.rft
Possibly it has some control characters which cause the terminal to which it is written to suppress output.
Try moving test.rtf to your build directory. If your project is named MyProject, move it to MyProject/build/Debug/.
I can think of two things that could cause this problem. Either there is an error when calling fgetc, or you are getting output that you don't recognize.
fgetc() will return EOF when the end of the file is reached, or an error occurs. To determine if it's an error, just after your while loop try:
if (ferror(filePtr) != 0) printf("error: %d.\n", errno);
A .rtf file is not a plain text file. It likely contains a bunch of formatting information. You are expecting to see "Hello . . . ". but what you may actually see is something like:
{\rtf1\ansi\ansicpg1252\cocoartf1038\cocoasubrtf250
{\fonttbl\f0\fswiss\fcharset0 Helvetica;}
{\colortbl;\red255\green255\blue255;}
\margl1440\margr1440\vieww9000\viewh8400\viewkind0
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040
\f0\fs24 \cf0 Hello . . .
And you are just assuming that is GDB output, not your program's output.
Based upon your recent comments, I think you have an empty file test.rtf in the directory your program is run in, and your real test.rtf file is in some other directory. Maybe your fopen() call at some point was fopen("test.rtf", "w"); instead of fopen("test.rtf", "r");, and you later modified it.
To see the directory your program is running in, add the following to your program after the FILE *filePtr; line:
char pwd[512];
if (getcwd(pwd, sizeof pwd) != -1)
printf("In directory %s\n", pwd);
else
fprintf(stderr, "Need bigger buffer, change '512' above\n");
Then, you can open a terminal, do cd <directory>, and test for yourself if the file you want is the file your program is opening.
You probably want this file to be plain text, not rich text. Rich text has a lot of formatting encoded into the file.
Related
I've got a utility that outputs a list of files required by a game. How can I run that utility within a C program and grab its output so I can act on it within the same program?
UPDATE: Good call on the lack of information. The utility spits out a series of strings, and this is supposed to be portable across Mac/Windows/Linux. Please note, I'm looking for a programmatic way to execute the utility and retain its output (which goes to stdout).
As others have pointed out, popen() is the most standard way. And since no answer provided an example using this method, here it goes:
#include <stdio.h>
#define BUFSIZE 128
int parse_output(void) {
char *cmd = "ls -l";
char buf[BUFSIZE];
FILE *fp;
if ((fp = popen(cmd, "r")) == NULL) {
printf("Error opening pipe!\n");
return -1;
}
while (fgets(buf, BUFSIZE, fp) != NULL) {
// Do whatever you want here...
printf("OUTPUT: %s", buf);
}
if (pclose(fp)) {
printf("Command not found or exited with error status\n");
return -1;
}
return 0;
}
Sample output:
OUTPUT: total 16
OUTPUT: -rwxr-xr-x 1 14077 14077 8832 Oct 19 04:32 a.out
OUTPUT: -rw-r--r-- 1 14077 14077 1549 Oct 19 04:32 main.c
For simple problems in Unix-ish environments try popen().
From the man page:
The popen() function opens a process by creating a pipe, forking and invoking the shell.
If you use the read mode this is exactly what you asked for. I don't know if it is implemented in Windows.
For more complicated problems you want to look up inter-process communication.
popen is supported on Windows, see here:
http://msdn.microsoft.com/en-us/library/96ayss4b.aspx
If you want it to be cross-platform, popen is the way to go.
Well, assuming you're on a command line in a windows environment, you can use pipes or command line redirects. For instance,
commandThatOutputs.exe > someFileToStoreResults.txt
or
commandThatOutputs.exe | yourProgramToProcessInput.exe
Within your program, you could use the C standard input functions to read the other programs output (scanf, etc.): http://irc.essex.ac.uk/www.iota-six.co.uk/c/c1_standard_input_and_output.asp . You could also use the file example and use fscanf. This should also work in Unix/Linux.
This is a very generic question, you may want to include more details, like what type of output it is (just text, or a binary file?) and how you want to process it.
Edit: Hooray clarification!
Redirecting STDOUT looks to be troublesome, I've had to do it in .NET, and it gave me all sorts of headaches. It looks like the proper C way is to spawn a child process, get a file pointer, and all of a sudden my head hurts.
So heres a hack that uses temporary files. It's simple, but it should work. This will work well if speed isn't an issue (hitting the disk is slow), or if it's throw-away. If you're building an enterprise program, looking into the STDOUT redirection is probably best, using what other people recommended.
#include <stdlib.h>
#include <stdio.h>
int main(int argc, char* argv[])
{
FILE * fptr; // file holder
char c; // char buffer
system("dir >> temp.txt"); // call dir and put it's contents in a temp using redirects.
fptr = fopen("temp.txt", "r"); // open said file for reading.
// oh, and check for fptr being NULL.
while(1){
c = fgetc(fptr);
if(c!= EOF)
printf("%c", c); // do what you need to.
else
break; // exit when you hit the end of the file.
}
fclose(fptr); // don't call this is fptr is NULL.
remove("temp.txt"); // clean up
getchar(); // stop so I can see if it worked.
}
Make sure to check your file permissions: right now this will simply throw the file in the same directory as an exe. You might want to look into using /tmp in nix, or C:\Users\username\Local Settings\Temp in Vista, or C:\Documents and Settings\username\Local Settings\Temp in 2K/XP. I think the /tmp will work in OSX, but I've never used one.
In Linux and OS X, popen() really is your best bet, as dmckee pointed out, since both OSs support that call. In Windows, this should help: http://msdn.microsoft.com/en-us/library/ms682499.aspx
MSDN documentation says
If used in a Windows program, the _popen function returns an invalid file pointer that causes the program to stop responding indefinitely. _popen works properly in a console application. To create a Windows application that redirects input and output, see Creating a Child Process with Redirected Input and Output in the Windows SDK.
You can use system() as in:
system("ls song > song.txt");
where ls is the command name for listing the contents of the folder song and song is a folder in the current directory. Resulting file song.txt will be created in the current directory.
//execute external process and read exactly binary or text output
//can read image from Zip file for example
string run(const char* cmd){
FILE* pipe = popen(cmd, "r");
if (!pipe) return "ERROR";
char buffer[262144];
string data;
string result;
int dist=0;
int size;
//TIME_START
while(!feof(pipe)) {
size=(int)fread(buffer,1,262144, pipe); //cout<<buffer<<" size="<<size<<endl;
data.resize(data.size()+size);
memcpy(&data[dist],buffer,size);
dist+=size;
}
//TIME_PRINT_
pclose(pipe);
return data;
}
I've got a utility that outputs a list of files required by a game. How can I run that utility within a C program and grab its output so I can act on it within the same program?
UPDATE: Good call on the lack of information. The utility spits out a series of strings, and this is supposed to be portable across Mac/Windows/Linux. Please note, I'm looking for a programmatic way to execute the utility and retain its output (which goes to stdout).
As others have pointed out, popen() is the most standard way. And since no answer provided an example using this method, here it goes:
#include <stdio.h>
#define BUFSIZE 128
int parse_output(void) {
char *cmd = "ls -l";
char buf[BUFSIZE];
FILE *fp;
if ((fp = popen(cmd, "r")) == NULL) {
printf("Error opening pipe!\n");
return -1;
}
while (fgets(buf, BUFSIZE, fp) != NULL) {
// Do whatever you want here...
printf("OUTPUT: %s", buf);
}
if (pclose(fp)) {
printf("Command not found or exited with error status\n");
return -1;
}
return 0;
}
Sample output:
OUTPUT: total 16
OUTPUT: -rwxr-xr-x 1 14077 14077 8832 Oct 19 04:32 a.out
OUTPUT: -rw-r--r-- 1 14077 14077 1549 Oct 19 04:32 main.c
For simple problems in Unix-ish environments try popen().
From the man page:
The popen() function opens a process by creating a pipe, forking and invoking the shell.
If you use the read mode this is exactly what you asked for. I don't know if it is implemented in Windows.
For more complicated problems you want to look up inter-process communication.
popen is supported on Windows, see here:
http://msdn.microsoft.com/en-us/library/96ayss4b.aspx
If you want it to be cross-platform, popen is the way to go.
Well, assuming you're on a command line in a windows environment, you can use pipes or command line redirects. For instance,
commandThatOutputs.exe > someFileToStoreResults.txt
or
commandThatOutputs.exe | yourProgramToProcessInput.exe
Within your program, you could use the C standard input functions to read the other programs output (scanf, etc.): http://irc.essex.ac.uk/www.iota-six.co.uk/c/c1_standard_input_and_output.asp . You could also use the file example and use fscanf. This should also work in Unix/Linux.
This is a very generic question, you may want to include more details, like what type of output it is (just text, or a binary file?) and how you want to process it.
Edit: Hooray clarification!
Redirecting STDOUT looks to be troublesome, I've had to do it in .NET, and it gave me all sorts of headaches. It looks like the proper C way is to spawn a child process, get a file pointer, and all of a sudden my head hurts.
So heres a hack that uses temporary files. It's simple, but it should work. This will work well if speed isn't an issue (hitting the disk is slow), or if it's throw-away. If you're building an enterprise program, looking into the STDOUT redirection is probably best, using what other people recommended.
#include <stdlib.h>
#include <stdio.h>
int main(int argc, char* argv[])
{
FILE * fptr; // file holder
char c; // char buffer
system("dir >> temp.txt"); // call dir and put it's contents in a temp using redirects.
fptr = fopen("temp.txt", "r"); // open said file for reading.
// oh, and check for fptr being NULL.
while(1){
c = fgetc(fptr);
if(c!= EOF)
printf("%c", c); // do what you need to.
else
break; // exit when you hit the end of the file.
}
fclose(fptr); // don't call this is fptr is NULL.
remove("temp.txt"); // clean up
getchar(); // stop so I can see if it worked.
}
Make sure to check your file permissions: right now this will simply throw the file in the same directory as an exe. You might want to look into using /tmp in nix, or C:\Users\username\Local Settings\Temp in Vista, or C:\Documents and Settings\username\Local Settings\Temp in 2K/XP. I think the /tmp will work in OSX, but I've never used one.
In Linux and OS X, popen() really is your best bet, as dmckee pointed out, since both OSs support that call. In Windows, this should help: http://msdn.microsoft.com/en-us/library/ms682499.aspx
MSDN documentation says
If used in a Windows program, the _popen function returns an invalid file pointer that causes the program to stop responding indefinitely. _popen works properly in a console application. To create a Windows application that redirects input and output, see Creating a Child Process with Redirected Input and Output in the Windows SDK.
You can use system() as in:
system("ls song > song.txt");
where ls is the command name for listing the contents of the folder song and song is a folder in the current directory. Resulting file song.txt will be created in the current directory.
//execute external process and read exactly binary or text output
//can read image from Zip file for example
string run(const char* cmd){
FILE* pipe = popen(cmd, "r");
if (!pipe) return "ERROR";
char buffer[262144];
string data;
string result;
int dist=0;
int size;
//TIME_START
while(!feof(pipe)) {
size=(int)fread(buffer,1,262144, pipe); //cout<<buffer<<" size="<<size<<endl;
data.resize(data.size()+size);
memcpy(&data[dist],buffer,size);
dist+=size;
}
//TIME_PRINT_
pclose(pipe);
return data;
}
I've got a utility that outputs a list of files required by a game. How can I run that utility within a C program and grab its output so I can act on it within the same program?
UPDATE: Good call on the lack of information. The utility spits out a series of strings, and this is supposed to be portable across Mac/Windows/Linux. Please note, I'm looking for a programmatic way to execute the utility and retain its output (which goes to stdout).
As others have pointed out, popen() is the most standard way. And since no answer provided an example using this method, here it goes:
#include <stdio.h>
#define BUFSIZE 128
int parse_output(void) {
char *cmd = "ls -l";
char buf[BUFSIZE];
FILE *fp;
if ((fp = popen(cmd, "r")) == NULL) {
printf("Error opening pipe!\n");
return -1;
}
while (fgets(buf, BUFSIZE, fp) != NULL) {
// Do whatever you want here...
printf("OUTPUT: %s", buf);
}
if (pclose(fp)) {
printf("Command not found or exited with error status\n");
return -1;
}
return 0;
}
Sample output:
OUTPUT: total 16
OUTPUT: -rwxr-xr-x 1 14077 14077 8832 Oct 19 04:32 a.out
OUTPUT: -rw-r--r-- 1 14077 14077 1549 Oct 19 04:32 main.c
For simple problems in Unix-ish environments try popen().
From the man page:
The popen() function opens a process by creating a pipe, forking and invoking the shell.
If you use the read mode this is exactly what you asked for. I don't know if it is implemented in Windows.
For more complicated problems you want to look up inter-process communication.
popen is supported on Windows, see here:
http://msdn.microsoft.com/en-us/library/96ayss4b.aspx
If you want it to be cross-platform, popen is the way to go.
Well, assuming you're on a command line in a windows environment, you can use pipes or command line redirects. For instance,
commandThatOutputs.exe > someFileToStoreResults.txt
or
commandThatOutputs.exe | yourProgramToProcessInput.exe
Within your program, you could use the C standard input functions to read the other programs output (scanf, etc.): http://irc.essex.ac.uk/www.iota-six.co.uk/c/c1_standard_input_and_output.asp . You could also use the file example and use fscanf. This should also work in Unix/Linux.
This is a very generic question, you may want to include more details, like what type of output it is (just text, or a binary file?) and how you want to process it.
Edit: Hooray clarification!
Redirecting STDOUT looks to be troublesome, I've had to do it in .NET, and it gave me all sorts of headaches. It looks like the proper C way is to spawn a child process, get a file pointer, and all of a sudden my head hurts.
So heres a hack that uses temporary files. It's simple, but it should work. This will work well if speed isn't an issue (hitting the disk is slow), or if it's throw-away. If you're building an enterprise program, looking into the STDOUT redirection is probably best, using what other people recommended.
#include <stdlib.h>
#include <stdio.h>
int main(int argc, char* argv[])
{
FILE * fptr; // file holder
char c; // char buffer
system("dir >> temp.txt"); // call dir and put it's contents in a temp using redirects.
fptr = fopen("temp.txt", "r"); // open said file for reading.
// oh, and check for fptr being NULL.
while(1){
c = fgetc(fptr);
if(c!= EOF)
printf("%c", c); // do what you need to.
else
break; // exit when you hit the end of the file.
}
fclose(fptr); // don't call this is fptr is NULL.
remove("temp.txt"); // clean up
getchar(); // stop so I can see if it worked.
}
Make sure to check your file permissions: right now this will simply throw the file in the same directory as an exe. You might want to look into using /tmp in nix, or C:\Users\username\Local Settings\Temp in Vista, or C:\Documents and Settings\username\Local Settings\Temp in 2K/XP. I think the /tmp will work in OSX, but I've never used one.
In Linux and OS X, popen() really is your best bet, as dmckee pointed out, since both OSs support that call. In Windows, this should help: http://msdn.microsoft.com/en-us/library/ms682499.aspx
MSDN documentation says
If used in a Windows program, the _popen function returns an invalid file pointer that causes the program to stop responding indefinitely. _popen works properly in a console application. To create a Windows application that redirects input and output, see Creating a Child Process with Redirected Input and Output in the Windows SDK.
You can use system() as in:
system("ls song > song.txt");
where ls is the command name for listing the contents of the folder song and song is a folder in the current directory. Resulting file song.txt will be created in the current directory.
//execute external process and read exactly binary or text output
//can read image from Zip file for example
string run(const char* cmd){
FILE* pipe = popen(cmd, "r");
if (!pipe) return "ERROR";
char buffer[262144];
string data;
string result;
int dist=0;
int size;
//TIME_START
while(!feof(pipe)) {
size=(int)fread(buffer,1,262144, pipe); //cout<<buffer<<" size="<<size<<endl;
data.resize(data.size()+size);
memcpy(&data[dist],buffer,size);
dist+=size;
}
//TIME_PRINT_
pclose(pipe);
return data;
}
I've got a utility that outputs a list of files required by a game. How can I run that utility within a C program and grab its output so I can act on it within the same program?
UPDATE: Good call on the lack of information. The utility spits out a series of strings, and this is supposed to be portable across Mac/Windows/Linux. Please note, I'm looking for a programmatic way to execute the utility and retain its output (which goes to stdout).
As others have pointed out, popen() is the most standard way. And since no answer provided an example using this method, here it goes:
#include <stdio.h>
#define BUFSIZE 128
int parse_output(void) {
char *cmd = "ls -l";
char buf[BUFSIZE];
FILE *fp;
if ((fp = popen(cmd, "r")) == NULL) {
printf("Error opening pipe!\n");
return -1;
}
while (fgets(buf, BUFSIZE, fp) != NULL) {
// Do whatever you want here...
printf("OUTPUT: %s", buf);
}
if (pclose(fp)) {
printf("Command not found or exited with error status\n");
return -1;
}
return 0;
}
Sample output:
OUTPUT: total 16
OUTPUT: -rwxr-xr-x 1 14077 14077 8832 Oct 19 04:32 a.out
OUTPUT: -rw-r--r-- 1 14077 14077 1549 Oct 19 04:32 main.c
For simple problems in Unix-ish environments try popen().
From the man page:
The popen() function opens a process by creating a pipe, forking and invoking the shell.
If you use the read mode this is exactly what you asked for. I don't know if it is implemented in Windows.
For more complicated problems you want to look up inter-process communication.
popen is supported on Windows, see here:
http://msdn.microsoft.com/en-us/library/96ayss4b.aspx
If you want it to be cross-platform, popen is the way to go.
Well, assuming you're on a command line in a windows environment, you can use pipes or command line redirects. For instance,
commandThatOutputs.exe > someFileToStoreResults.txt
or
commandThatOutputs.exe | yourProgramToProcessInput.exe
Within your program, you could use the C standard input functions to read the other programs output (scanf, etc.): http://irc.essex.ac.uk/www.iota-six.co.uk/c/c1_standard_input_and_output.asp . You could also use the file example and use fscanf. This should also work in Unix/Linux.
This is a very generic question, you may want to include more details, like what type of output it is (just text, or a binary file?) and how you want to process it.
Edit: Hooray clarification!
Redirecting STDOUT looks to be troublesome, I've had to do it in .NET, and it gave me all sorts of headaches. It looks like the proper C way is to spawn a child process, get a file pointer, and all of a sudden my head hurts.
So heres a hack that uses temporary files. It's simple, but it should work. This will work well if speed isn't an issue (hitting the disk is slow), or if it's throw-away. If you're building an enterprise program, looking into the STDOUT redirection is probably best, using what other people recommended.
#include <stdlib.h>
#include <stdio.h>
int main(int argc, char* argv[])
{
FILE * fptr; // file holder
char c; // char buffer
system("dir >> temp.txt"); // call dir and put it's contents in a temp using redirects.
fptr = fopen("temp.txt", "r"); // open said file for reading.
// oh, and check for fptr being NULL.
while(1){
c = fgetc(fptr);
if(c!= EOF)
printf("%c", c); // do what you need to.
else
break; // exit when you hit the end of the file.
}
fclose(fptr); // don't call this is fptr is NULL.
remove("temp.txt"); // clean up
getchar(); // stop so I can see if it worked.
}
Make sure to check your file permissions: right now this will simply throw the file in the same directory as an exe. You might want to look into using /tmp in nix, or C:\Users\username\Local Settings\Temp in Vista, or C:\Documents and Settings\username\Local Settings\Temp in 2K/XP. I think the /tmp will work in OSX, but I've never used one.
In Linux and OS X, popen() really is your best bet, as dmckee pointed out, since both OSs support that call. In Windows, this should help: http://msdn.microsoft.com/en-us/library/ms682499.aspx
MSDN documentation says
If used in a Windows program, the _popen function returns an invalid file pointer that causes the program to stop responding indefinitely. _popen works properly in a console application. To create a Windows application that redirects input and output, see Creating a Child Process with Redirected Input and Output in the Windows SDK.
You can use system() as in:
system("ls song > song.txt");
where ls is the command name for listing the contents of the folder song and song is a folder in the current directory. Resulting file song.txt will be created in the current directory.
//execute external process and read exactly binary or text output
//can read image from Zip file for example
string run(const char* cmd){
FILE* pipe = popen(cmd, "r");
if (!pipe) return "ERROR";
char buffer[262144];
string data;
string result;
int dist=0;
int size;
//TIME_START
while(!feof(pipe)) {
size=(int)fread(buffer,1,262144, pipe); //cout<<buffer<<" size="<<size<<endl;
data.resize(data.size()+size);
memcpy(&data[dist],buffer,size);
dist+=size;
}
//TIME_PRINT_
pclose(pipe);
return data;
}
I've got a utility that outputs a list of files required by a game. How can I run that utility within a C program and grab its output so I can act on it within the same program?
UPDATE: Good call on the lack of information. The utility spits out a series of strings, and this is supposed to be portable across Mac/Windows/Linux. Please note, I'm looking for a programmatic way to execute the utility and retain its output (which goes to stdout).
As others have pointed out, popen() is the most standard way. And since no answer provided an example using this method, here it goes:
#include <stdio.h>
#define BUFSIZE 128
int parse_output(void) {
char *cmd = "ls -l";
char buf[BUFSIZE];
FILE *fp;
if ((fp = popen(cmd, "r")) == NULL) {
printf("Error opening pipe!\n");
return -1;
}
while (fgets(buf, BUFSIZE, fp) != NULL) {
// Do whatever you want here...
printf("OUTPUT: %s", buf);
}
if (pclose(fp)) {
printf("Command not found or exited with error status\n");
return -1;
}
return 0;
}
Sample output:
OUTPUT: total 16
OUTPUT: -rwxr-xr-x 1 14077 14077 8832 Oct 19 04:32 a.out
OUTPUT: -rw-r--r-- 1 14077 14077 1549 Oct 19 04:32 main.c
For simple problems in Unix-ish environments try popen().
From the man page:
The popen() function opens a process by creating a pipe, forking and invoking the shell.
If you use the read mode this is exactly what you asked for. I don't know if it is implemented in Windows.
For more complicated problems you want to look up inter-process communication.
popen is supported on Windows, see here:
http://msdn.microsoft.com/en-us/library/96ayss4b.aspx
If you want it to be cross-platform, popen is the way to go.
Well, assuming you're on a command line in a windows environment, you can use pipes or command line redirects. For instance,
commandThatOutputs.exe > someFileToStoreResults.txt
or
commandThatOutputs.exe | yourProgramToProcessInput.exe
Within your program, you could use the C standard input functions to read the other programs output (scanf, etc.): http://irc.essex.ac.uk/www.iota-six.co.uk/c/c1_standard_input_and_output.asp . You could also use the file example and use fscanf. This should also work in Unix/Linux.
This is a very generic question, you may want to include more details, like what type of output it is (just text, or a binary file?) and how you want to process it.
Edit: Hooray clarification!
Redirecting STDOUT looks to be troublesome, I've had to do it in .NET, and it gave me all sorts of headaches. It looks like the proper C way is to spawn a child process, get a file pointer, and all of a sudden my head hurts.
So heres a hack that uses temporary files. It's simple, but it should work. This will work well if speed isn't an issue (hitting the disk is slow), or if it's throw-away. If you're building an enterprise program, looking into the STDOUT redirection is probably best, using what other people recommended.
#include <stdlib.h>
#include <stdio.h>
int main(int argc, char* argv[])
{
FILE * fptr; // file holder
char c; // char buffer
system("dir >> temp.txt"); // call dir and put it's contents in a temp using redirects.
fptr = fopen("temp.txt", "r"); // open said file for reading.
// oh, and check for fptr being NULL.
while(1){
c = fgetc(fptr);
if(c!= EOF)
printf("%c", c); // do what you need to.
else
break; // exit when you hit the end of the file.
}
fclose(fptr); // don't call this is fptr is NULL.
remove("temp.txt"); // clean up
getchar(); // stop so I can see if it worked.
}
Make sure to check your file permissions: right now this will simply throw the file in the same directory as an exe. You might want to look into using /tmp in nix, or C:\Users\username\Local Settings\Temp in Vista, or C:\Documents and Settings\username\Local Settings\Temp in 2K/XP. I think the /tmp will work in OSX, but I've never used one.
In Linux and OS X, popen() really is your best bet, as dmckee pointed out, since both OSs support that call. In Windows, this should help: http://msdn.microsoft.com/en-us/library/ms682499.aspx
MSDN documentation says
If used in a Windows program, the _popen function returns an invalid file pointer that causes the program to stop responding indefinitely. _popen works properly in a console application. To create a Windows application that redirects input and output, see Creating a Child Process with Redirected Input and Output in the Windows SDK.
You can use system() as in:
system("ls song > song.txt");
where ls is the command name for listing the contents of the folder song and song is a folder in the current directory. Resulting file song.txt will be created in the current directory.
//execute external process and read exactly binary or text output
//can read image from Zip file for example
string run(const char* cmd){
FILE* pipe = popen(cmd, "r");
if (!pipe) return "ERROR";
char buffer[262144];
string data;
string result;
int dist=0;
int size;
//TIME_START
while(!feof(pipe)) {
size=(int)fread(buffer,1,262144, pipe); //cout<<buffer<<" size="<<size<<endl;
data.resize(data.size()+size);
memcpy(&data[dist],buffer,size);
dist+=size;
}
//TIME_PRINT_
pclose(pipe);
return data;
}