I have a WPF app where I'm updating output on key press.
My code works fine. Only it feels a little bit behind as I'm using KeyUp event.
When I try to use KeyDown, it is always a character behind. I have already tried adding UpdateSourceTrigger as shown in the TextBox XAML below
<TextBox
Text="{Binding TheLine, UpdateSourceTrigger=PropertyChanged}"
Behaviors:WatermarkTextBoxBehavior.EnableWatermark="True"
Behaviors:WatermarkTextBoxBehavior.Label="Please enter a numeric value"
Behaviors:WatermarkTextBoxBehavior.LabelStyle="{StaticResource watermarkLabelStyle}"
Grid.Column="0" x:Name="txtLengthFrom" GotFocus="txtLengthFrom_GotFocus" FontSize="15" FontWeight="SemiBold"></TextBox>
All characters are available as expected in the KeyUp event. What can I do to make sure all characters are available in the KeyDown event?
The code behind looks like this
public MainWindow()
{
InitializeComponent();
this.KeyDown += new KeyEventHandler(MainWindow_KeyDown);
}
void MainWindow_KeyDown(object sender, KeyEventArgs e)
{
UpdateOutput();
}
Based on #Jon's comment, I changed my code to use TextBox.TextChanged event and it works as I want. So now when I keep a key pressed, the output is changing as characters gets added to text box. The way I had it, it would not update the output while I had a key pressed. I just didn't like it so was trying to fix that.
KeyDown event happens before the key takes effect on your property. Not sure why you want to do this, but you'll need to check the KeyEventArgs for which key is being pressed if you HAVE to have them all in keydown. If you end up modifying your property based on what is in the KeyEventArgs, you'll need to set e.Handled = true to prevent it from happening twice (Since it will be handled later if you don't).
I have an MVVM setup with a mainwindow that contains a ContentControl.
I set this to a particular viewmodel which then maps to a view.
A view is a usercontrol.
I want to be able to set the default keyboard focus to a default element in the usercontrol(View) when it loads so the application can eventually be driven just by using up, down, left, right and enter.
Some of my failed attempts are setting
FocusManager.FocusedElement="{Binding ElementName=DefaultElement}"
in my content control tag. This sets the logical focus but not the keyboard focus
I'd rather keep the solution in xaml if possable but have tried placing the following in code behind.
Keyboard.Focus(DefaultElement);
This does not work but if I popup a message box first it does. I'm a little confused as to why.
MessageBox.Show(Keyboard.FocusedElement.ToString());
Keyboard.Focus(DefaultElement);
EDIT::::
I just placed this in my onloaded event of my user control. It seems to work but can anyone see any issues that might arrise at this priority level. I.E a circumstance when the action will never run?
Dispatcher.BeginInvoke(
DispatcherPriority.ContextIdle,
new Action(delegate()
{
Keyboard.Focus(DefaultElement);
}));
It seems that this wpf the you have to implement a workaround on a case by case basis. The solution that seemed to work best, most of the time for me was to insert the focus code inside the dispatcher when OnVisible was changed. This sets the focus not only when the View/Usercontrol loads but also if you a changing Views by way of Visibility. If you Hide and then Show a ContentControl that is mapped to your ViewModels then the Loaded event won't fire and you'll be forced to Mouse input, or tabbing (Not so good if you want to navigate your app with a remote control).
VisibilityChanged will always fire however. This is what I ended up with for my listbox.
private void ItemsFlowListBox_IsVisibleChanged(object sender, DependencyPropertyChangedEventArgs e)
{
if ((bool)e.NewValue == true)
{
Dispatcher.BeginInvoke(
DispatcherPriority.ContextIdle,
new Action(delegate()
{
ItemsFlowListBox.Focus();
ItemsFlowListBox.ScrollIntoView(ItemsFlowListBox.SelectedItem);
}));
}
}
I had the same symptom for a WPF UserControl hosted in a Winforms application. Just wanted to note I was about to try this solution when I found a normal TabIndex in the Winforms app fixed it
Per How to set which control gets the focus on application start
"The one with the minimum tab index automatically gets the focus
(assuming the TabStop property is set to true). Just set the tab
indices appropriately."
It's a tricky one with no easy answer. I'm currently doing this, although I'm not sure I like it:
public MyView()
{
InitializeComponent();
// When DataContext changes hook the txtName.TextChanged event so we can give it initial focus
DataContextChanged +=
(sender, args) =>
{
txtName.TextChanged += OnTxtNameOnTextChanged;
};
}
private void OnTxtNameOnTextChanged(object o, TextChangedEventArgs eventArgs)
{
// Setting focus will select all text in the TextBox due to the global class handler on TextBox
txtName.Focus();
// Now unhook the event handler, since it's no longer required
txtName.TextChanged -= OnTxtNameOnTextChanged;
}
And in case you're wondering what the global class handler does, it's this:
protected override void OnStartup(StartupEventArgs e)
{
...
// Register a global handler for this app-domain to select all text in a textBox when
// the textBox receives keyboard focus.
EventManager.RegisterClassHandler(
typeof (TextBox), UIElement.GotKeyboardFocusEvent,
new RoutedEventHandler((sender, args) => ((TextBox) sender).SelectAll()));
which auto selects TextBox text when receiving keyboard focus.
I have some RoutedCommands for commands like control-A, copy paste and they all work fine.
Then I added 4 more routedcommands to move object up down left and right in the canvas using arrowkeys, they sometimes works and sometime doesn't. At first I thought it was a Focus issue on the Canvas but I just found out that at the same time, all the other routedcommands like control-A works but arrowkeys doesn't.
I really have no idea what's going on here, they are identical routedcommands with different variable names, how come one works 100% of time and one only work 50% of time?
Working RoutedCommand:
_bindings.Add(new CommandBinding(DesignerCanvas.SelectAll, SelectAll_Executed));
SelectAll.InputGestures.Add(new KeyGesture(Key.A, ModifierKeys.Control));
private void SelectAll_Executed(object sender, ExecutedRoutedEventArgs e)
{
SelectionService.SelectAll();
}
Malfunctioning RoutedCommand:
_bindings.Add(new CommandBinding(DesignerCanvas.MoveDown, MoveDown_Executed));
MoveDown.InputGestures.Add(new KeyGesture(Key.Down));
private void MoveDown_Executed(object sender, ExecutedRoutedEventArgs e)
{
e.Handled = true;
var selectedItems = from item in SelectionService.CurrentSelection.OfType<DesignerItem>()
select item;
if (selectedItems.Count() > 0)
{
for (int i = 0; i < selectedItems.Count(); i++)
selectedItems.ElementAt(i).Top += Option.OptionSingleton.Sensitivity;
}
}
The malfunctioning RoutedCommand is just not firing sometimes, especially after I open some other window and come back to the canvas, then it will stop firing while other routedcommands are unaffected. Any ideas what's causing this weird behavior?
You can sometiems use very inclusive class event handlers to trace the route of an event:
EventManager.RegisterClassHandler(typeof(FrameworkElement), CommandManager.CanExecuteEvent,
new CanExecuteRoutedEventHandler((s, e) => Debug.WriteLine("CanExecute: " + s)), true);
EventManager.RegisterClassHandler(typeof(FrameworkElement), CommandManager.ExecutedEvent,
new CanExecuteRoutedEventHandler((s, e) => Debug.WriteLine("Executed:" + s)), true);
EventManager.RegisterClassHandler(typeof(FrameworkElement), CommandManager.ExecutedEvent,
new CanExecuteRoutedEventHandler((s, e) => Debug.WriteLine("KeyDown:" + s)), true);
In your case the KeyDown may be handled before it reaches the command binding or the CanExecute event may not reach it for some other reason.
Hopefully this will help you debug the problem
This may be due to the fact that the key you are using is the "Down" key. I suspect that if you used a different key, it would work.
Some controls consume the arrow keys and pageup/pagedown keys. For example, TextBox does this. If your Canvas is in a scrollviewer, the scrollviewer might be eating it.
There are two workarounds for this:
Add a binding to the control that is eating the key gesture.
Handle KeyPreview for the Canvas (or any parent of the control that is eating the keystroke) and execute the command from there.
The answer to this question shows how you can do #2 without writing specific code in the KeyPreview handler for each command.
It turns out that it was a focus issue, I just set the focus to the canvas whenever mouse enters, now it's sort of fixed. Thanks everybody for answering.
So basically, I have a bunch of TextBoxes that the user gets to fill out. I've got a button that I want to keep disabled until all the TextBoxes have had text entered in them. Here is a sample XAML TextBox that I'm using:
<TextBox Name="DelayedRecallScore" TextInput="CheckTextBoxFilled" Width="24" />
And here is the function that I'm trying to trigger:
//Disables the OK button until all score textboxes have content
private void CheckTextBoxFilled(object sender, RoutedEventArgs e)
{
/*
foreach (TextBox scorebox in TextBoxList)
{
if (string.IsNullOrEmpty(scorebox.Text))
{
Ok_Button.IsEnabled = false;
return;
}
}
Ok_Button.IsEnabled = true;
*/
MessageBox.Show("THIS MAKES NO SENSE");
}
The MessageBox is not showing up when TextInput should be getting triggered. As an experiment I tried triggering CheckTextBoxFilled() on PreviewTextInput, and it worked fine then, meaning that for whatever reason, the function just isn't getting called. I also have a validation function that is triggered by PreviewTextInput, which works as it should. At first I thought PreviewTextInput might somehow be interfering with TextInput, so I took PreviewTextInput off the TextBox, but that hasn't managed to fix anything. I'm completely befuddled by why this might happen, so any help would be appreciated.
Your handler for the TextInput event is not fired because the TextBox is handling the event. You could try using the TextChanged event instead, since really you just want to know when characters were added or removed from the TextBox.
InitializeComponent();
textbox.AddHandler(TextBox.TextInputEvent,
new TextCompositionEventHandler(TextBox_TextInput_1),
true);
Use "PreviewTextInput" instead, it will work.
Create a new class derived from TextBox. In the new class override the OnTextInput method. Your OnTextInput method will get called before the TextBox gets it.
I have a UserControl which contains a TextBox. When my main window loads I want to set the focus to this textbox so I added Focusable="True" GotFocus="UC_GotFocus" to the UserControls definition and FocusManager.FocusedElement="{Binding ElementName=login}" to my main windows definition. In the UC_GotFocus method i simply call .Focus() on the control i want to focus on but this doesn't work.
All i need to do is have a TextBox in a UserControl receive focus when the application starts.
Any help would be appreciated, thanks.
I recently fixed this problem for a login splash screen that is being displayed via a storyboard when the main window is first loaded.
I believe there were two keys to the fix. One was to make the containing element a focus scope. The other was to handle the Storyboard Completed event for the storyboard that was triggered by the window being loaded.
This storyboard makes the username and password canvas visible and then fades into being 100% opaque. The key is that the username control was not visible until the storyboard ran and therefore that control could not get keyboard focus until it was visible. What threw me off for awhile was that it had "focus" (i.e. focus was true, but as it turns out this was only logical focus) and I did not know that WPF had the concept of both logical and keyboard focus until reading Kent Boogaart's answer and looking at Microsoft's WPF link text
Once I did that the solution for my particular problem was straightforward:
1) Make the containing element a focus scope
<Canvas FocusManager.IsFocusScope="True" Visibility="Collapsed">
<TextBox x:Name="m_uxUsername" AcceptsTab="False" AcceptsReturn="False">
</TextBox>
</Canvas>
2) Attach a Completed Event Handler to the Storyboard
<Storyboard x:Key="Splash Screen" Completed="UserNamePassword_Storyboard_Completed">
...
</Storyboard>
and
3) Set my username TextBox to have the keyboard focus in the storyboard completed event handler.
void UserNamePassword_Storyboard_Completed(object sender, EventArgs e)
{
m_uxUsername.Focus();
}
Note that calling item.Focus() results in the call Keyboard.Focus(this), so you don't need to call this explicitly. See this question about the difference between Keyboard.Focus(item) and item.Focus.
Its stupid but it works:
Pop a thread that waits a while then comes back and sets the focus you want. It even works within the context of an element host.
private void ListView_SelectionChanged(object sender, SelectionChangedEventArgs e)
{
System.Threading.ThreadPool.QueueUserWorkItem(
(a) =>
{
System.Threading.Thread.Sleep(100);
someUiElementThatWantsFocus.Dispatcher.Invoke(
new Action(() =>
{
someUiElementThatWantsFocus.Focus();
}));
}
);
}
Just recently I had a list-box that housed some TextBlocks. I wanted to be able to double click on the text block and have it turn into a TextBox, then focus on it and select all the text so the user could just start typing the new name (Akin to Adobe Layers)
Anyway, I was doing this with an event and it just wasn't working. The magic bullet for me here was making sure that I set the event to handled. I figure it was setting focus, but as soon as the event went down the path it was switching the logical focus.
The moral of the story is, make sure you're marking the event as handled, that might be your issue.
“When setting initial focus at application startup, the element to
receive focus must be connected to a PresentationSource and the
element must have Focusable and IsVisible set to true. The recommended
place to set initial focus is in the Loaded event handler"
(MSDN)
Simply add a "Loaded" event handler in the constructor of your Window (or Control), and in that event handler call the Focus() method on the target control.
public MyWindow() {
InitializeComponent();
this.Loaded += new RoutedEventHandler(MyWindow_Loaded);
}
void MyWindow_Loaded(object sender, RoutedEventArgs e) {
textBox.Focus();
}
since i tried a fuzquat's solution and found it the most generic one, i thought i'd share a different version, since some complained about it looking messy. so here it is:
casted.Dispatcher.BeginInvoke(new Action<UIElement>(x =>
{
x.Focus();
}), DispatcherPriority.ApplicationIdle, casted);
no Thread.Sleep, no ThreadPool. Clean enough i hope.
UPDATE:
Since people seem to like pretty code:
public static class WpfExtensions
{
public static void BeginInvoke<T>(this T element, Action<T> action, DispatcherPriority priority = DispatcherPriority.ApplicationIdle) where T : UIElement
{
element.Dispatcher.BeginInvoke(priority, action);
}
}
now you can call it like this:
child.BeginInvoke(d => d.Focus());
WPF supports two different flavors of focus:
Keyboard focus
Logical focus
The FocusedElement property gets or sets logical focus within a focus scope. I suspect your TextBox does have logical focus, but its containing focus scope is not the active focus scope. Ergo, it does not have keyboard focus.
So the question is, do you have multiple focus scopes in your visual tree?
I found a good series of blog posts on WPF focus.
Part 1: It’s Basically Focus
Part 2: Changing WPF focus in code
Part 3: Shifting focus to the first available element in WPF
They are all good to read, but the 3rd part specifically deals with setting focus to a UI element in a UserControl.
Set your user control to Focusable="True" (XAML)
Handle the GotFocus event on your control and call yourTextBox.Focus()
Handle the Loaded event on your window and call yourControl.Focus()
I have a sample app running with this solution as I type. If this does not work for you, there must be something specific to your app or environment that causes the problem. In your original question, I think the binding is causing the problem.
I hope this helps.
After having a 'WPF Initial Focus Nightmare' and based on some answers on stack, the following proved for me to be the best solution.
First, add your App.xaml OnStartup() the followings:
EventManager.RegisterClassHandler(typeof(Window), Window.LoadedEvent,
new RoutedEventHandler(WindowLoaded));
Then add the 'WindowLoaded' event also in App.xaml :
void WindowLoaded(object sender, RoutedEventArgs e)
{
var window = e.Source as Window;
System.Threading.Thread.Sleep(100);
window.Dispatcher.Invoke(
new Action(() =>
{
window.MoveFocus(new TraversalRequest(FocusNavigationDirection.First));
}));
}
The threading issue must be use as WPF initial focus mostly fails due to some framework race conditions.
I found the following solution best as it is used globally for the whole app.
Hope it helps...
Oran
I converted fuzquat's answer to an extension method. I'm using this instead of Focus() where Focus() did not work.
using System;
using System.Threading;
using System.Windows;
namespace YourProject.Extensions
{
public static class UIElementExtension
{
public static void WaitAndFocus(this UIElement element, int ms = 100)
{
ThreadPool.QueueUserWorkItem(f =>
{
Thread.Sleep(ms);
element.Dispatcher.Invoke(new Action(() =>
{
element.Focus();
}));
});
}
}
}
I've noticed a focus issue specifically related to hosting WPF UserControls within ElementHosts which are contained within a Form that is set as an MDI child via the MdiParent property.
I'm not sure if this is the same issue others are experiencing but you dig into the details by following the link below.
Issue with setting focus within a WPF UserControl hosted within an ElementHost in a WindowsForms child MDI form
I don't like solutions with setting another tab scope for UserControl. In that case, you will have two different carets when navigating by keyboard: on the window and the another - inside user control. My solution is simply to redirect focus from user control to inner child control. Set user control focusable (because by default its false):
<UserControl ..... Focusable="True">
and override focus events handlers in code-behind:
protected override void OnGotFocus(RoutedEventArgs e)
{
base.OnGotFocus(e);
MyTextBox.Focus();
}
protected override void OnGotKeyboardFocus(KeyboardFocusChangedEventArgs e)
{
base.OnGotKeyboardFocus(e);
Keyboard.Focus(MyTextBox);
}
What did the trick for me was the FocusManager.FocusedElement attribute. I first tried to set it on the UserControl, but it didn't work.
So I tried putting it on the UserControl's first child instead:
<UserControl x:Class="WpfApplication3.UserControl1"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
<Grid FocusManager.FocusedElement="{Binding ElementName=MyTextBox, Mode=OneWay}">
<TextBox x:Name="MyTextBox"/>
</Grid>
... and it worked! :)
I have user control - stack panel with two text boxes.The text boxes were added in contructor, not in the xaml. When i try to focus first text box, nothing happend.
The siggestion with Loaded event fix my problem. Just called control.Focus() in Loaded event and everthing.
Assuming you want to set focus for Username textbox, thus user can type in directly every time it shows up.
In Constructor of your control:
this.Loaded += (sender, e) => Keyboard.Focus(txtUsername);
After trying combinations of the suggestions above, I was able to reliably assign focus to a desired text box on a child UserControl with the following. Basically, give focus to the child control and have the child UserControl give focus to its TextBox. The TextBox's focus statement returned true by itself, however did not yield the desired result until the UserControl was given focus as well. I should also note that the UserControl was unable to request focus for itself and had to be given by the Window.
For brevity I left out registering the Loaded events on the Window and UserControl.
Window
private void OnWindowLoaded(object sender, RoutedEventArgs e)
{
ControlXYZ.Focus();
}
UserControl
private void OnControlLoaded(object sender, RoutedEventArgs e)
{
TextBoxXYZ.Focus();
}
I set it in the PageLoaded() or control loaded, but then I'm calling WCF async service and doing stuff that seems to lose the focus. I have to to set it at the end of all the stuff I do. That's fine and all, but sometimes I make changes to the code and then I forget that I'm also setting the cursor.
I had same problem with setting keyboard focus to canvas in WPF user control.
My solution
In XAML set element to Focusable="True"
In element_mousemove event create simple check:
if(!element.IsKeyBoardFocused)
element.Focus();
In my case it works fine.