i have MYOB installed on one computer and that system crush due to virus, i got all myob data and program files.
problem is i don't have installer for MYOB, i lost it.
i copy all the myob folder to c:\program files\myob
and try to run myob, its giving MYOB ERROR 9004
after i search on net i found that i need to create these registry entries which i did
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Software\MYOB Technology]
[HKEY_LOCAL_MACHINE\Software\MYOB Technology\AU]
[HKEY_LOCAL_MACHINE\Software\MYOB Technology\AU\MSC]
[HKEY_LOCAL_MACHINE\Software\MYOB Technology\AU\MSC\3.0]
"JavaHome"="C:\\Program Files\\MYOB\\Common\\JRE"
now program run and after getting user name & password it give error initialization error.
does any one have idea how to run myob on system without installing it.
Thanks
are you copying all folders, this error seems that you are missing some files/ folders.
check all the folders and files.
Make sure you also copy and paste over the MYOB file in your Program files, as well as the MYOBVersion as this is where the licence is!
The best answer will depend on which product and version you have installed and for the most accurate detail you're best reaching out to support directly.
For products like AccountRight Live you can easily re-install the software on the new computer. You can get fresh copies of the installers from the product downloads section of your my.myob.com login.
Individual company files (.myox for AccountRight Live) can be copied to the new computer and then opened (in much the same way you would install Microsoft Word and then open a Word .docx document) noting that each file is linked to the serial number.
And lastly on a note of personal advice: run a patched anti-virus on the new machine :)
Related
I am trying to install DB2 ibm data server client(version 11.1), silent install in my windows server. i am using response file for the installation. I gave the path in response file to install in D drive, but still it is installing in C drive only. the command i was using is: msiexec /i "MSI path" /q /l*v "log file path" RSP_FILE_PATH="response file path".
Check the following:
Installing Db2 products and features using a response
Some notes on MSI customization in general below.
And a link to the most commonly used library of packaging tips contributed by packagers:
https://www.itninja.com/software-library/company/ibm
Different Designs: The exact mechanism used to redirect a folder like that depends on the design of the application and the setup from the vendor, they often do something very non-standard so reverse engineering their solution fully or slightly is usually neccessary.
Itninja.com: Maybe have a look if you can find the software here in the itninja.com "software tips" section: https://www.itninja.com/software-library/company/ibm - this is a collection of comments people have made who have packaged and deployed the software in question - either unsuccessfully or successfully. I can't really tell what the exact product name is, please check.
Download: If you have a download link that is publicly accessible I can have a quick look at the MSI to determine how it is set up. Please be aware that it is much better to install an MSI directly via normal configuration mechanisms (setting public properties and / or creating a transform - sample here) than to run a setup.exe with response file (which sometimes is the only possibility depending on the overall deployment design).
How to make better use of MSI files
A couple of quick overviews:
How to parameterize msi file from electron builder
MSI Repackaging - free tool
And some further links for reference:
Change the value of a MSI property loaded from a DLL using a MSI transform
How to run an installation in /silent mode with adjusted settings
I have created a GUI and Database for my company. I am trying to alpha test the program. I made the program so that everyone would place it on their C drive so that the file paths would stay consistent. When I email the zip folder to everyone it adds an extra folder that is causing errors to the file path (I believe the error occurs during extraction?). Does anyone know a good way to prevent this from happening? Thanks!
Although "xcopy deployment" is a valid method to deploy programs, it can come with complications, as you have discovered. Instead, you can create an actual installer program which is much more versatile.
For a lead-in on making an installer you can read Create MSI installer in Visual Studio 2017.
Make sure that the program uses locations as given in the Environment.SpecialFolder Enumeration so that it is automatically adapted for any (properly-configured) Windows installation.
Other installers are available, e.g. Inno Setup, which may offer simpler or more detailed configuration of some options like replacing or keeping older files, or installing prerequisites like a required framework version.
I have created a winform application and programmatically trying to attach the database when an application runs first time. Unfortunately in windows 7 i always got an error. Please view the screenshot below it tells the whole story. Now my question is that how can i get rid from this error, is there any way to automatically give required rights on the folder where the application installs?. I want to permanently resolve this error and need smooth attachment. Anyone please help.
Please view the error below. Thanks in advance
Try ALTER DATABASE MyDatabaseName SET READ_WRITE
More informations here on This forum
Edit
This was asked by someone else
If you put your database in your own subdirectory of the directory returned by Environment.GetFolderPath(Environment.SpecialFolder.LocalApplicationData then the user will have read/write access to it.
See Environment.SpecialFolder Enumeration to determine if a different location would be more suitable, e.g. ApplicationData if you need it to roam or CommonApplicationData if you need all users of the computer to use it.
Edit: I found a slightly more extensive version of this answer: Where Should I Store my Data and Configuration Files if I Target Multiple OS Versions?, please also see the articles it links to.
I know this answer is somehow late, but I believe people always face the same problems so my case is worth to be shared.
tl;dr = Change the permission of deployed files manually or using icacls command.
Actually I use InstallForge for packing and deploying my application(s).
No matter what setup creator is used, when the application is installed to a non-system folder ( e.g. D:\ ) the program works perfectly and the database is readable/writable.
Whereas when the application is installed in [Program Files] folder or [Program Files (X86)] folder, Windows takes a preventive security measurement and sets file permission to be only [Read] and [Read & Execute].
I think Windows Vista and later versions of Windows have this behavior.
You can check that by right-clicking the installed file and going to properties then Security tab.
The files I installed on D:\ had Full-Control permission while, as I mentioned, the ones on C:\ had only Read & Execute permissions.
You won't notice the difference when you install a normal program on C:\ because you might not be writing data on a file or a database. But in case of database deployment, the file has to be writable.
Finally, the solution for this case was telling InstallForge to change file permissions at the end of the installation using icacls commands :
icacls "C:\MyApp\MyDB.mdf" /Grant Everyone:F
icacls "C:\MyApp\MyDB_log.ldf" /Grant Everyone:F
In my case, it is okay to give everyone full-control on the database files, but you might need a customized solution for your case so please refer to :
http://ss64.com/nt/icacls.html
You can tell your setup creator to run those commands, or you can put them together in a batch file and run it after the installation.
I used to install Neo4j 2.0.0-M05 as windows service, this worked great. With 2.0.0-RC1 it doesn't any more.
Intro
With 2.0.0-RC1 I can download an installer. Seems that this installer does not have an option to install Neo4j as service. Also it doesn't let you set some directories (I like everything in C:\apache\neo4j); some stuff is being stored in my user directory. And it doesn't remember the location of the database. So that leaves the zip as only real alternative, though the zip file comes in only one version while the installer comes in 32bits and 64bits??
Anyway now trying with the zip package I have to run a .bat file just as before (i'm used to this). But when i try install, i get:
C:\apache\neo4j\bin>Neo4jInstaller.bat install
"WARNING: this installer is deprecated and may not be the optimal way to install Neo4j on your system."
"Please see the Neo4j Manual for up to date information on installing Neo4j."
Press any key to continue
Two things are weird.
It's the only option to install neo4j as service, so how can it be deprecated?
Press any key to continue only response to the enter key.
Problem
Continuing on the the real problem:
Press any key to continue
[SC] CreateService SUCCESS
[SC] StartService FAILED 87:
The parameter is incorrect.
Workaround
I removed the .bat files from 2.0.0-RC1 and copied the 2.0.0-M05 bat files over to the new version. It seems to start the new version without a problem.
Thanks for the feedback. There are open github issues related to much of this, which we'll clean up before going to GA. Even then, your conclusion is correct, that for now installation as a service requires downloading the .zip distribution. We'll make that more clear in the download page.
Generally, installation as a windows service is something we're working to improve. I'd love to chat with you a bit about your particular deployment scenario. Please drop me a line at andreas#neotechnology.com.
Best,
Andreas
Whenever I open one of the Quantum Grid demos in Delphi XE Pro (on Windows 7 32-bit), the following error is displayed for every table (I think) in the project:
error message http://www.tranglos.com/img/qgerror.png
The message is:
Network initialization failed.
File or directory does not exist.
File: C:\PDOXUSRS.NET
Permission denied.
Directory: C:\.
I understand permission issues writing to c:\, but the result is that while I can build and run the demo projects, no data is displayed, which makes the demos rather useless. And what kind of database writes its configuration to c:\ directory in the 21st century anyway? :) (Yes, I know very little about Paradox databases, but I won't ever be using one either. I just want to learn how to use the grid.)
Using BDE Administrator I've tried changing the Paradox "NET DIR" value to a folder with write permissions on the C drive. Result: now the database tables cannot find their data:
Path not found.
File: C:..\..\Data\GENRES.DB.
...and the unhelpfully truncated path gives no indication where the files are expected to be.
Is there a way to work around the problem so that the demos can load their sample data correctly?
Did you install the BDE correctly? It should use the DBDEMOS files. Do you see such an alias in the BDE administration utility? Can you open that database in one of the Delphi demos?
The BDE is not a XXI century database, it was developed twenty years ago and never upgraded lately. It's an obsolete tecnology, but because it comes still with every release of Delphi with a known database it is still often used in demos because nothing new has to be installed.
Anyway that file is not its configuration file. It's a sharing lock file to allow more than one user to use the database concurrently. Because it is a file based database without a central server, it has to use such kind of shared files. Usually its position is changed to a network share, but it defaults to C:\ for historical reasons.
Anyway it's not only the BDE still attempting to write in the prong directories. I still see a full bunch of applications attempting to write to C:\ (especially logs) or other read-only positions.
Using BDE Admin to change the location for PDOXUSRS.NET helped, but it wasn't sufficient. DevExpress did the right thing in specifying a relative folder for the data location, and the relative folder seems perfectly allright, but for some reason the DB can't find it.
Solution: under the \Demos\ folder find all the *.dfm files that contain the string
..\..\Data
and replace that string with the absolute path to the demos folder. That done, all the demos open correctly.
I know this message from our own applications. It has to do with security measures introduced with Windows Vista. The operating system trying to protect critical files denies access to them. There is a method how to bypass this mechanism without compromising security. Try to run your application in compatibility mode. When application is running in compatibility mode, read / write operations from / to system folders are redirected to "safe" directories located in C:\Users[Current User]\AppData\Local\VirtualStore.
More info on http://www.windowsecurity.com/articles/Protecting-System-Files-UAC-Virtualization-Part1.html.