Arrays in unix shell? - arrays

How do I create an array in unix shell scripting?

The following code creates and prints an array of strings in shell:
#!/bin/bash
array=("A" "B" "ElementC" "ElementE")
for element in "${array[#]}"
do
echo "$element"
done
echo
echo "Number of elements: ${#array[#]}"
echo
echo "${array[#]}"
Result:
A
B
ElementC
ElementE
Number of elements: 4
A B ElementC ElementE

in bash, you create array like this
arr=(one two three)
to call the elements
$ echo "${arr[0]}"
one
$ echo "${arr[2]}"
three
to ask for user input, you can use read
read -p "Enter your choice: " choice

Bourne shell doesn't support arrays. However, there are two ways to handle the issue.
Use positional shell parameters $1, $2, etc.:
$ set one two three
$ echo $*
one two three
$ echo $#
3
$ echo $2
two
Use variable evaluations:
$ n=1 ; eval a$n="one"
$ n=2 ; eval a$n="two"
$ n=3 ; eval a$n="three"
$ n=2
$ eval echo \$a$n
two

#!/bin/bash
# define a array, space to separate every item
foo=(foo1 foo2)
# access
echo "${foo[1]}"
# add or changes
foo[0]=bar
foo[2]=cat
foo[1000]=also_OK
You can read the ABS "Advanced Bash-Scripting Guide"

The Bourne shell and C shell don't have arrays, IIRC.
In addition to what others have said, in Bash you can get the number of elements in an array as follows:
elements=${#arrayname[#]}
and do slice-style operations:
arrayname=(apple banana cherry)
echo ${arrayname[#]:1} # yields "banana cherry"
echo ${arrayname[#]: -1} # yields "cherry"
echo ${arrayname[${#arrayname[#]}-1]} # yields "cherry"
echo ${arrayname[#]:0:2} # yields "apple banana"
echo ${arrayname[#]:1:1} # yields "banana"

Try this :
echo "Find the Largest Number and Smallest Number of a given number"
echo "---------------------------------------------------------------------------------"
echo "Enter the number"
read n
i=0
while [ $n -gt 0 ] #For Seperating digits and Stored into array "x"
do
x[$i]=`expr $n % 10`
n=`expr $n / 10`
i=`expr $i + 1`
done
echo "Array values ${x[#]}" # For displaying array elements
len=${#x[*]} # it returns the array length
for (( i=0; i<len; i++ )) # For Sorting array elements using Bubble sort
do
for (( j=i+1; j<len; j++ ))
do
if [ `echo "${x[$i]} > ${x[$j]}"|bc` ]
then
t=${x[$i]}
t=${x[$i]}
x[$i]=${x[$j]}
x[$j]=$t
fi
done
done
echo "Array values ${x[*]}" # Displaying of Sorted Array
for (( i=len-1; i>=0; i-- )) # Form largest number
do
a=`echo $a \* 10 + ${x[$i]}|bc`
done
echo "Largest Number is : $a"
l=$a #Largest number
s=0
while [ $a -gt 0 ] # Reversing of number, We get Smallest number
do
r=`expr $a % 10`
s=`echo "$s * 10 + $r"|bc`
a=`expr $a / 10`
done
echo "Smallest Number is : $s" #Smallest Number
echo "Difference between Largest number and Smallest number"
echo "=========================================="
Diff=`expr $l - $s`
echo "Result is : $Diff"
echo "If you try it, We can get it"

Your question asks about "unix shell scripting", but is tagged bash. Those are two different answers.
The POSIX specification for shells does not have anything to say about arrays, as the original Bourne shell did not support them. Even today, on FreeBSD, Ubuntu Linux, and many other systems, /bin/sh does not have array support. So if you want your script to work in different Bourne-compatible shells, you shouldn't use them. Alternatively, if you are assuming a specific shell, then be sure to put its full name in the shebang line, e.g. #!/usr/bin/env bash.
If you are using bash or zsh, or a modern version of ksh, you can create an array like this:
myArray=(first "second element" 3rd)
and access elements like this
$ echo "${myArray[1]}" # for bash/ksh; for zsh, echo $myArray[2]
second element
You can get all the elements via "${myArray[#]}". You can use the slice notation ${array[#]:start:length} to restrict the portion of the array referenced, e.g. "${myArray[#]:1}" to leave off the first element.
The length of the array is ${#myArray[#]}. You can get a new array containing all the indexes from an existing array with "${!myArray[#]}".
Older versions of ksh before ksh93 also had arrays, but not the parenthesis-based notation, nor did they support slicing. You could create an array like this, though:
set -A myArray -- first "second element" 3rd

You can try of the following type :
#!/bin/bash
declare -a arr
i=0
j=0
for dir in $(find /home/rmajeti/programs -type d)
do
arr[i]=$dir
i=$((i+1))
done
while [ $j -lt $i ]
do
echo ${arr[$j]}
j=$((j+1))
done

An array can be loaded in twoways.
set -A TEST_ARRAY alpha beta gamma
or
X=0 # Initialize counter to zero.
-- Load the array with the strings alpha, beta, and gamma
for ELEMENT in alpha gamma beta
do
TEST_ARRAY[$X]=$ELEMENT
((X = X + 1))
done
Also, I think below information may help:
The shell supports one-dimensional arrays. The maximum number of array
elements is 1,024. When an array is defined, it is automatically
dimensioned to 1,024 elements. A one-dimensional array contains a
sequence of array elements, which are like the boxcars connected
together on a train track.
In case you want to access the array:
echo ${MY_ARRAY[2] # Show the third array element
gamma
echo ${MY_ARRAY[*] # Show all array elements
- alpha beta gamma
echo ${MY_ARRAY[#] # Show all array elements
- alpha beta gamma
echo ${#MY_ARRAY[*]} # Show the total number of array elements
- 3
echo ${#MY_ARRAY[#]} # Show the total number of array elements
- 3
echo ${MY_ARRAY} # Show array element 0 (the first element)
- alpha

If you want a key value store with support for spaces use the -A parameter:
declare -A programCollection
programCollection["xwininfo"]="to aquire information about the target window."
for program in ${!programCollection[#]}
do
echo "The program ${program} is used ${programCollection[${program}]}"
done
http://linux.die.net/man/1/bash "Associative arrays are created using declare -A name. "

There are multiple ways to create an array in shell.
ARR[0]="ABC"
ARR[1]="BCD"
echo ${ARR[*]}
${ARR[*]} prints all elements in the array.
Second way is:
ARR=("A" "B" "C" "D" 5 7 "J")
echo ${#ARR[#]}
echo ${ARR[0]}
${#ARR[#]} is used to count length of the array.

To read the values from keybord and insert element into array
# enter 0 when exit the insert element
echo "Enter the numbers"
read n
while [ $n -ne 0 ]
do
x[$i]=`expr $n`
read n
let i++
done
#display the all array elements
echo "Array values ${x[#]}"
echo "Array values ${x[*]}"
# To find the array length
length=${#x[*]}
echo $length

A Simple way :
arr=("sharlock" "bomkesh" "feluda" ) ##declare array
len=${#arr[*]} #determine length of array
# iterate with for loop
for (( i=0; i<len; i++ ))
do
echo ${arr[$i]}
done

In ksh you do it:
set -A array element1 element2 elementn
# view the first element
echo ${array[0]}
# Amount elements (You have to substitute 1)
echo ${#array[*]}
# show last element
echo ${array[ $(( ${#array[*]} - 1 )) ]}

Related

Loop over indices of sliced array in bash

I want to loop over the indices of an array starting on the second index. How can I do this?
I have tried:
myarray=( "test1" "test2" "test3" "test4")
for i in ${!myarray[#]:1}
do
# I only print the indices to simplify the example
echo $i
done
But doesn't work.
Obviously this works:
myarray=( "test1" "test2" "test3" "test4")
myindices=("${!myarray[#]}")
for i in ${myindices[#]:1}
do
echo $i
done
But I would like to combine everything in the for loop statement if possible.
Use the # parameter length expansion:
myarray=( "test1" "test2" "test3" "test4")
for (( i=1; i < ${#myarray[#]}; i++ ))
do
# only print the indices to simplify the example
echo $i
done
Note that the ! indirect expansion operator is evidently not compatible with substring expansion since:
echo "${!myarray[#]:2}"
Produces an error code 1 and outputs to STDERR:
bash: test1 test2 test3 test4: bad substitution
At least for current versions of bash, v.4.4 and earlier. Unfortunately man bash doesn't make it sufficiently clear that substring expansion doesn't work with indirect expansion.
I'd do it this way:
#!/usr/bin/env bash
myarray=('a' 'b' 'c' 'd')
start_index=2
# generate a null delimited list of indexes
printf '%s\0' "${!myarray[#]}" |
# slice the indexes list 2nd entry to last
cut --zero-terminated --delimiter='' --fields="${start_index}-" |
# iterate the sliced indexes list
while read -r -d '' i; do
echo "$i"
done
Output does not list first index 0 as expected:
1
2
3
Works as well with an associative array:
#!/usr/bin/env bash
typeset -A myassocarray=(["foo"]='a' ["bar"]='b' ["baz"]='c' ["qux"]='d')
start_index=2
# generate a null delimited list of indexes
printf '%s\0' "${!myassocarray[#]}" |
# slice the indexes list 2nd entry to last
cut --zero-terminated --delimiter='' --fields="${start_index}-" |
# iterate the sliced indexes list
while read -r -d '' k; do
echo "$k"
done
Output:
bar
baz
qux

How do you unset all empty array elements in bash? [duplicate]

I need to remove an element from an array in bash shell.
Generally I'd simply do:
array=("${(#)array:#<element to remove>}")
Unfortunately the element I want to remove is a variable so I can't use the previous command.
Down here an example:
array+=(pluto)
array+=(pippo)
delete=(pluto)
array( ${array[#]/$delete} ) -> but clearly doesn't work because of {}
Any idea?
The following works as you would like in bash and zsh:
$ array=(pluto pippo)
$ delete=pluto
$ echo ${array[#]/$delete}
pippo
$ array=( "${array[#]/$delete}" ) #Quotes when working with strings
If need to delete more than one element:
...
$ delete=(pluto pippo)
for del in ${delete[#]}
do
array=("${array[#]/$del}") #Quotes when working with strings
done
Caveat
This technique actually removes prefixes matching $delete from the elements, not necessarily whole elements.
Update
To really remove an exact item, you need to walk through the array, comparing the target to each element, and using unset to delete an exact match.
array=(pluto pippo bob)
delete=(pippo)
for target in "${delete[#]}"; do
for i in "${!array[#]}"; do
if [[ ${array[i]} = $target ]]; then
unset 'array[i]'
fi
done
done
Note that if you do this, and one or more elements is removed, the indices will no longer be a continuous sequence of integers.
$ declare -p array
declare -a array=([0]="pluto" [2]="bob")
The simple fact is, arrays were not designed for use as mutable data structures. They are primarily used for storing lists of items in a single variable without needing to waste a character as a delimiter (e.g., to store a list of strings which can contain whitespace).
If gaps are a problem, then you need to rebuild the array to fill the gaps:
for i in "${!array[#]}"; do
new_array+=( "${array[i]}" )
done
array=("${new_array[#]}")
unset new_array
You could build up a new array without the undesired element, then assign it back to the old array. This works in bash:
array=(pluto pippo)
new_array=()
for value in "${array[#]}"
do
[[ $value != pluto ]] && new_array+=($value)
done
array=("${new_array[#]}")
unset new_array
This yields:
echo "${array[#]}"
pippo
This is the most direct way to unset a value if you know it's position.
$ array=(one two three)
$ echo ${#array[#]}
3
$ unset 'array[1]'
$ echo ${array[#]}
one three
$ echo ${#array[#]}
2
This answer is specific to the case of deleting multiple values from large arrays, where performance is important.
The most voted solutions are (1) pattern substitution on an array, or (2) iterating over the array elements. The first is fast, but can only deal with elements that have distinct prefix, the second has O(n*k), n=array size, k=elements to remove. Associative array are relative new feature, and might not have been common when the question was originally posted.
For the exact match case, with large n and k, possible to improve performance from O(nk) to O(n+klog(k)). In practice, O(n) assuming k much lower than n. Most of the speed up is based on using associative array to identify items to be removed.
Performance (n-array size, k-values to delete). Performance measure seconds of user time
N K New(seconds) Current(seconds) Speedup
1000 10 0.005 0.033 6X
10000 10 0.070 0.348 5X
10000 20 0.070 0.656 9X
10000 1 0.043 0.050 -7%
As expected, the current solution is linear to N*K, and the fast solution is practically linear to K, with much lower constant. The fast solution is slightly slower vs the current solution when k=1, due to additional setup.
The 'Fast' solution: array=list of input, delete=list of values to remove.
declare -A delk
for del in "${delete[#]}" ; do delk[$del]=1 ; done
# Tag items to remove, based on
for k in "${!array[#]}" ; do
[ "${delk[${array[$k]}]-}" ] && unset 'array[k]'
done
# Compaction
array=("${array[#]}")
Benchmarked against current solution, from the most-voted answer.
for target in "${delete[#]}"; do
for i in "${!array[#]}"; do
if [[ ${array[i]} = $target ]]; then
unset 'array[i]'
fi
done
done
array=("${array[#]}")
Here's a one-line solution with mapfile:
$ mapfile -d $'\0' -t arr < <(printf '%s\0' "${arr[#]}" | grep -Pzv "<regexp>")
Example:
$ arr=("Adam" "Bob" "Claire"$'\n'"Smith" "David" "Eve" "Fred")
$ echo "Size: ${#arr[*]} Contents: ${arr[*]}"
Size: 6 Contents: Adam Bob Claire
Smith David Eve Fred
$ mapfile -d $'\0' -t arr < <(printf '%s\0' "${arr[#]}" | grep -Pzv "^Claire\nSmith$")
$ echo "Size: ${#arr[*]} Contents: ${arr[*]}"
Size: 5 Contents: Adam Bob David Eve Fred
This method allows for great flexibility by modifying/exchanging the grep command and doesn't leave any empty strings in the array.
Partial answer only
To delete the first item in the array
unset 'array[0]'
To delete the last item in the array
unset 'array[-1]'
To expand on the above answers, the following can be used to remove multiple elements from an array, without partial matching:
ARRAY=(one two onetwo three four threefour "one six")
TO_REMOVE=(one four)
TEMP_ARRAY=()
for pkg in "${ARRAY[#]}"; do
for remove in "${TO_REMOVE[#]}"; do
KEEP=true
if [[ ${pkg} == ${remove} ]]; then
KEEP=false
break
fi
done
if ${KEEP}; then
TEMP_ARRAY+=(${pkg})
fi
done
ARRAY=("${TEMP_ARRAY[#]}")
unset TEMP_ARRAY
This will result in an array containing:
(two onetwo three threefour "one six")
Here's a (probably very bash-specific) little function involving bash variable indirection and unset; it's a general solution that does not involve text substitution or discarding empty elements and has no problems with quoting/whitespace etc.
delete_ary_elmt() {
local word=$1 # the element to search for & delete
local aryref="$2[#]" # a necessary step since '${!$2[#]}' is a syntax error
local arycopy=("${!aryref}") # create a copy of the input array
local status=1
for (( i = ${#arycopy[#]} - 1; i >= 0; i-- )); do # iterate over indices backwards
elmt=${arycopy[$i]}
[[ $elmt == $word ]] && unset "$2[$i]" && status=0 # unset matching elmts in orig. ary
done
return $status # return 0 if something was deleted; 1 if not
}
array=(a 0 0 b 0 0 0 c 0 d e 0 0 0)
delete_ary_elmt 0 array
for e in "${array[#]}"; do
echo "$e"
done
# prints "a" "b" "c" "d" in lines
Use it like delete_ary_elmt ELEMENT ARRAYNAME without any $ sigil. Switch the == $word for == $word* for prefix matches; use ${elmt,,} == ${word,,} for case-insensitive matches; etc., whatever bash [[ supports.
It works by determining the indices of the input array and iterating over them backwards (so deleting elements doesn't screw up iteration order). To get the indices you need to access the input array by name, which can be done via bash variable indirection x=1; varname=x; echo ${!varname} # prints "1".
You can't access arrays by name like aryname=a; echo "${$aryname[#]}, this gives you an error. You can't do aryname=a; echo "${!aryname[#]}", this gives you the indices of the variable aryname (although it is not an array). What DOES work is aryref="a[#]"; echo "${!aryref}", which will print the elements of the array a, preserving shell-word quoting and whitespace exactly like echo "${a[#]}". But this only works for printing the elements of an array, not for printing its length or indices (aryref="!a[#]" or aryref="#a[#]" or "${!!aryref}" or "${#!aryref}", they all fail).
So I copy the original array by its name via bash indirection and get the indices from the copy. To iterate over the indices in reverse I use a C-style for loop. I could also do it by accessing the indices via ${!arycopy[#]} and reversing them with tac, which is a cat that turns around the input line order.
A function solution without variable indirection would probably have to involve eval, which may or may not be safe to use in that situation (I can't tell).
Using unset
To remove an element at particular index, we can use unset and then do copy to another array. Only just unset is not required in this case. Because unset does not remove the element it just sets null string to the particular index in array.
declare -a arr=('aa' 'bb' 'cc' 'dd' 'ee')
unset 'arr[1]'
declare -a arr2=()
i=0
for element in "${arr[#]}"
do
arr2[$i]=$element
((++i))
done
echo "${arr[#]}"
echo "1st val is ${arr[1]}, 2nd val is ${arr[2]}"
echo "${arr2[#]}"
echo "1st val is ${arr2[1]}, 2nd val is ${arr2[2]}"
Output is
aa cc dd ee
1st val is , 2nd val is cc
aa cc dd ee
1st val is cc, 2nd val is dd
Using :<idx>
We can remove some set of elements using :<idx> also. For example if we want to remove 1st element we can use :1 as mentioned below.
declare -a arr=('aa' 'bb' 'cc' 'dd' 'ee')
arr2=("${arr[#]:1}")
echo "${arr2[#]}"
echo "1st val is ${arr2[1]}, 2nd val is ${arr2[2]}"
Output is
bb cc dd ee
1st val is cc, 2nd val is dd
http://wiki.bash-hackers.org/syntax/pe#substring_removal
${PARAMETER#PATTERN} # remove from beginning
${PARAMETER##PATTERN} # remove from the beginning, greedy match
${PARAMETER%PATTERN} # remove from the end
${PARAMETER%%PATTERN} # remove from the end, greedy match
In order to do a full remove element, you have to do an unset command with an if statement. If you don't care about removing prefixes from other variables or about supporting whitespace in the array, then you can just drop the quotes and forget about for loops.
See example below for a few different ways to clean up an array.
options=("foo" "bar" "foo" "foobar" "foo bar" "bars" "bar")
# remove bar from the start of each element
options=("${options[#]/#"bar"}")
# options=("foo" "" "foo" "foobar" "foo bar" "s" "")
# remove the complete string "foo" in a for loop
count=${#options[#]}
for ((i = 0; i < count; i++)); do
if [ "${options[i]}" = "foo" ] ; then
unset 'options[i]'
fi
done
# options=( "" "foobar" "foo bar" "s" "")
# remove empty options
# note the count variable can't be recalculated easily on a sparse array
for ((i = 0; i < count; i++)); do
# echo "Element $i: '${options[i]}'"
if [ -z "${options[i]}" ] ; then
unset 'options[i]'
fi
done
# options=("foobar" "foo bar" "s")
# list them with select
echo "Choose an option:"
PS3='Option? '
select i in "${options[#]}" Quit
do
case $i in
Quit) break ;;
*) echo "You selected \"$i\"" ;;
esac
done
Output
Choose an option:
1) foobar
2) foo bar
3) s
4) Quit
Option?
Hope that helps.
There is also this syntax, e.g. if you want to delete the 2nd element :
array=("${array[#]:0:1}" "${array[#]:2}")
which is in fact the concatenation of 2 tabs. The first from the index 0 to the index 1 (exclusive) and the 2nd from the index 2 to the end.
POSIX shell script does not have arrays.
So most probably you are using a specific dialect such as bash, korn shells or zsh.
Therefore, your question as of now cannot be answered.
Maybe this works for you:
unset array[$delete]
What I do is:
array="$(echo $array | tr ' ' '\n' | sed "/itemtodelete/d")"
BAM, that item is removed.
This is a quick-and-dirty solution that will work in simple cases but will break if (a) there are regex special characters in $delete, or (b) there are any spaces at all in any items. Starting with:
array+=(pluto)
array+=(pippo)
delete=(pluto)
Delete all entries exactly matching $delete:
array=(`echo $array | fmt -1 | grep -v "^${delete}$" | fmt -999999`)
resulting in
echo $array -> pippo, and making sure it's an array:
echo $array[1] -> pippo
fmt is a little obscure: fmt -1 wraps at the first column (to put each item on its own line. That's where the problem arises with items in spaces.) fmt -999999 unwraps it back to one line, putting back the spaces between items. There are other ways to do that, such as xargs.
Addendum: If you want to delete just the first match, use sed, as described here:
array=(`echo $array | fmt -1 | sed "0,/^${delete}$/{//d;}" | fmt -999999`)
Actually, I just noticed that the shell syntax somewhat has a behavior built-in that allows for easy reconstruction of the array when, as posed in the question, an item should be removed.
# let's set up an array of items to consume:
x=()
for (( i=0; i<10; i++ )); do
x+=("$i")
done
# here, we consume that array:
while (( ${#x[#]} )); do
i=$(( $RANDOM % ${#x[#]} ))
echo "${x[i]} / ${x[#]}"
x=("${x[#]:0:i}" "${x[#]:i+1}")
done
Notice how we constructed the array using bash's x+=() syntax?
You could actually add more than one item with that, the content of a whole other array at once.
In ZSH this is dead easy (note this uses more bash compatible syntax than necessary where possible for ease of understanding):
# I always include an edge case to make sure each element
# is not being word split.
start=(one two three 'four 4' five)
work=(${(#)start})
idx=2
val=${work[idx]}
# How to remove a single element easily.
# Also works for associative arrays (at least in zsh)
work[$idx]=()
echo "Array size went down by one: "
[[ $#work -eq $(($#start - 1)) ]] && echo "OK"
echo "Array item "$val" is now gone: "
[[ -z ${work[(r)$val]} ]] && echo OK
echo "Array contents are as expected: "
wanted=("${start[#]:0:1}" "${start[#]:2}")
[[ "${(j.:.)wanted[#]}" == "${(j.:.)work[#]}" ]] && echo "OK"
echo "-- array contents: start --"
print -l -r -- "-- $#start elements" ${(#)start}
echo "-- array contents: work --"
print -l -r -- "-- $#work elements" "${work[#]}"
Results:
Array size went down by one:
OK
Array item two is now gone:
OK
Array contents are as expected:
OK
-- array contents: start --
-- 5 elements
one
two
three
four 4
five
-- array contents: work --
-- 4 elements
one
three
four 4
five
To avoid conflicts with array index using unset - see https://stackoverflow.com/a/49626928/3223785 and https://stackoverflow.com/a/47798640/3223785 for more information - reassign the array to itself: ARRAY_VAR=(${ARRAY_VAR[#]}).
#!/bin/bash
ARRAY_VAR=(0 1 2 3 4 5 6 7 8 9)
unset ARRAY_VAR[5]
unset ARRAY_VAR[4]
ARRAY_VAR=(${ARRAY_VAR[#]})
echo ${ARRAY_VAR[#]}
A_LENGTH=${#ARRAY_VAR[*]}
for (( i=0; i<=$(( $A_LENGTH -1 )); i++ )) ; do
echo ""
echo "INDEX - $i"
echo "VALUE - ${ARRAY_VAR[$i]}"
done
exit 0
[Ref.: https://tecadmin.net/working-with-array-bash-script/ ]
How about something like:
array=(one two three)
array_t=" ${array[#]} "
delete=one
array=(${array_t// $delete / })
unset array_t
#/bin/bash
echo "# define array with six elements"
arr=(zero one two three 'four 4' five)
echo "# unset by index: 0"
unset -v 'arr[0]'
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
arr_delete_by_content() { # value to delete
for i in ${!arr[*]}; do
[ "${arr[$i]}" = "$1" ] && unset -v 'arr[$i]'
done
}
echo "# unset in global variable where value: three"
arr_delete_by_content three
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
echo "# rearrange indices"
arr=( "${arr[#]}" )
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
delete_value() { # value arrayelements..., returns array decl.
local e val=$1; new=(); shift
for e in "${#}"; do [ "$val" != "$e" ] && new+=("$e"); done
declare -p new|sed 's,^[^=]*=,,'
}
echo "# new array without value: two"
declare -a arr="$(delete_value two "${arr[#]}")"
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
delete_values() { # arraydecl values..., returns array decl. (keeps indices)
declare -a arr="$1"; local i v; shift
for v in "${#}"; do
for i in ${!arr[*]}; do
[ "$v" = "${arr[$i]}" ] && unset -v 'arr[$i]'
done
done
declare -p arr|sed 's,^[^=]*=,,'
}
echo "# new array without values: one five (keep indices)"
declare -a arr="$(delete_values "$(declare -p arr|sed 's,^[^=]*=,,')" one five)"
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
# new array without multiple values and rearranged indices is left to the reader

Array in Bash: Displaying all elements of array

echo "Enter N " # enter N for number of inputs for the loop
read N # reading the N
#using c-style loop
for((i=1;i<=N;i++))
do
read -a arr # arr is the name of the array
done
echo ${arr[*]} # 1
echo ${arr[#]} # 2
Tried all the ways to display all the elements of the array but not getting the desired output. It's displaying the last element of the array.
To be able to populate an array in loop use:
arr+=("$var")
Full code:
read -p 'Enter N: ' N
arr=() # initialize an array
# loop N times and append into array
for((i=1;i<=N;i++)); do
read a && arr+=("$a")
done
you are reading the data in an array arr and trying to print array
You keep redefining array with read -a. The code should be written like this instead:
#!/bin/bash
echo "Enter N " # enter N for number of inputs for the loop
read N # reading the N
#using c-style loop
declare -a array
for((i=1;i<=N;i++))
do
read array[$i] # arr is the name of the array
done
echo ${array[*]} # 1
echo ${array[#]} # 2
There are probably better ways to doing this. I just wanted to show how to fix your current code.
Example run
$ bash ./dummy.sh
Enter N
2
3
4
3 4
3 4
Hopefully this help other's who have the same issues.
Display all contents of the array in the shell:
"${arr[*]}"
Cleaning up your script (not sure what your intention was, though):
read -p "Enter N " N # User inputs the number of entries for the array
ARR=() # Define empty array
#using c-style loop
for ((i=1;i<=N;i++))
do
read -p "Enter array element number $N: " ADD # Prompt user to add element
ARR+=($ADD) # Actually add the new element to the array.
done
echo "${ARR[*]}" # Display all array contents in a line.
I found a similar solution from #choroba at: How to echo all values from array in bash

bad array subscript error in associative array

I am trying to create a dictionary program in Bash with the following options : 1. Add a word
2. Update meaning
3. Print dictionary
4. Search a word
5. Search by keyword
For the same, I am creating 2 associative arrays, 1 to store the word - meaning and other to store words-keyword.
The problem is I am not able to store values in the array. Everytime I try to do it, it gives me an error
dict[$word]: bad array subscript
Here is the code for part 1
echo
echo -n "Enter a word : "
read $word
echo
echo -n "Enter it's meaning : "
read $meaning
echo
echo -n "Enter some keywords(with space in between) to describe the word : "
read $keyword
dict[$word]=$meaning
keywords[$word]=$keyword
;;
I also tried inserting the following code to remove new line as suggested in some posts but ended up with same result.
word=`echo $word | grep -s '\n'`
keyword=`echo $keyword | grep -s '\n'`
Have also tried the following way :
dict["$word"]="$meaning"
keywords["$word"]="$keyword"
;;
Output :
dict[$word]: bad array subscript
When reading a variable you preface the variable name with a $ (or wrap in $( and )).
When assigning a value to a variable you do not preface the variable name with a $.
In your example your 3x echo/read sessions are attempting to assign values to your variables, but you've prefaced your variables with $, which means your variables are not getting set as you expect; this in turn could be generating your error because $word is not set/defined (depends on version of bash).
You should be able to see what I mean with the following code snippet:
unset word
echo
echo -n "Enter a word : "
read $word
echo ".${word}."
What do you get as ouput? .. ? .<whatever_you_typed_in>. ?
You may also have a problem with your associative arrays (depending on bash version); as George has mentioned, you should play it safe and explicitly declare your associative arrays.
I would suggest editing your input script like such (remove leading $ on your read variables; explicitly declaring your associative arrays):
echo
echo -n "Enter a word : "
read word
echo
echo -n "Enter it's meaning : "
read meaning
echo
echo -n "Enter some keywords(with space in between) to describe the word : "
read keyword
# print some debug messages:
echo "word=.${word}."
echo "meaning=.${meaning}."
echo "keyword=.${keyword}."
# declare arrays as associative
declare -A dict keywords
# assign values to arrays
dict[$word]=$meaning
keywords[$word]=$keyword
# verify array indexes and values
echo "dict index(es) : ${!dict[#]}"
echo "dict value(s) : ${dict[#]}"
echo "keywords index(es): ${!keywords[#]}"
echo "keywords value(s) : ${keywords[#]}"
In my bash 4.4 , this is not raising any error but is not working correctly either:
$ w="one";m="two";d["$w"]="$m";declare -p d
declare -a d=([0]="two")
It is obvious that bash determines array d as a normal array and not as an associative array.
On the contrary, this one works fine:
$ w="one";m="two";declare -A d;d["$w"]="$m";declare -p d
declare -A d=([one]="two" )
According to bash manual, you need first to declare -A an array in order to be used as an associative one.

Splitting line of text into array at bash

I have a bunch of files named jtn216_<n>.o<m> where n and m are integer. The first one is assigned by me and the second one by the system. I need to check the last line at each file. I ran this to split that line into array
for i in {361..380}; do
v=$(tail -n 1 jtn216_$i.o*)
IFS=' ' read -ra line <<< "$v"
echo $line $v
done
3499200 3499200 87650.5574975270 13.6931802555886
1014400 1014400 87947.4382620423 13.9208064005841
3475800 3475800 87779.1695691355 13.8939964916376
3479200 3479200 87459.7284508034 13.7824644675699
3827800 3827800 87868.7538056652 13.8792123626210
2551600 2551600 87615.6417285010 13.8700006744178
3818400 3818400 87872.1788028955 13.8942371285402
3476800 3476800 87842.0543708163 13.9170342642747
3481800 3481800 87670.5841054385 13.8808556469308
2559200 2559200 87800.6530231416 13.8874423695824
3841600 3841600 87804.3972028423 13.8657419719638
916400 916400 87776.1342228681 13.8622746230494
3839000 3839000 87662.8185016707 13.8576498806465
3835200 3835200 87933.6917697832 14.0007327053153
3482000 3482000 88323.3509854563 13.9453990979062
3485400 3485400 87657.5078357100 13.8478805156354
3484800 3484800 87757.3379321554 13.8215034461609
3475400 3475400 87970.4729449120 13.9605031841208
3481800 3481800 87612.4211302676 13.8327950845915
2319400 2319400 87521.5669854330 13.8383953325475
I expected line to be an array not the first value from v. What am I doing wrong?
I think you're just printing line wrongly. Try echo "${line[#]}" instead.
You should address the contents of the array variable $line well e.g.
echo "${line[0]}"
echo "${line[*]}" # converts to a single string
echo "${line[#]}" # converts to multiple elements i.e. multiple arguments for echo
When an array variable is addressed without an index it would be just equivalent to getting the first element.
What bash calls "arrays" are really just a list of words (a list that can't even be nested). So if you simply output the array using echo, you're just asking it to output a list of arguments to echo. Consider:
echo foo bar # 'foo bar\n'
echo -n foo bar # 'foo bar'
x=( -n foo bar )
echo "${x[#]}" # 'foo bar'
If you output an array's name without any index or # or * component, you will get the first word* in that array:
echo "$x" # foo
So when you do echo $line $v what you're really saying is
echo ${line[0]} $v
Here's what you probably want:
for i in {361..380}; do
tail -n 1 jtn216_$i.o* | { # Pipe to a compound command to preserve assignments from read
IFS=' ' read -ra line
printf '[ '
printf '%s ' "${line[#]}"
printf ']\n'
}
done
Then you should see
[ 3499200 87650.5574975270 13.6931802555886 ]
[ 1014400 87947.4382620423 13.9208064005841 ]
[ 3475800 87779.1695691355 13.8939964916376 ]
…
*Wordsplit again since you didn't use quotes.
Try the following, if you want to get last line as array:
v=(`tail -n 1 jtn216_$i.o*`)
UPDATED
To accumulate line as array use:
v=(`tail -n 1 jtn216_$i.o*`)
line+=(${v[#]})
To output whole array:
${line[#]} or ${line[*]}
To count number of array elements:
${#line[#]} or ${#line[*]}

Resources