Related
char *cp = (char *) malloc(1);
strcpy(cp, "123456789");
puts(cp);
output is "123456789" on both gcc (Linux) and Visual C++ Express, does that mean when there is free memory, I can actually use more than what I've allocated with malloc()?
and why malloc(0) doesn't cause runtime error?
Thanks.
You've asked a very good question and maybe this will whet your appetite about operating systems. Already you know you've managed to achieve something with this code that you wouldn't ordinarily expect to do. So you would never do this in code you want to make portable.
To be more specific, and this depends entirely on your operating system and CPU architecture, the operating system allocates "pages" of memory to your program - typically this can be in the order of 4 kilobytes. The operating system is the guardian of pages and will immediately terminate any program that attempts to access a page it has not been assigned.
malloc, on the other hand, is not an operating system function but a C library call. It can be implemented in many ways. It is likely that your call to malloc resulted in a page request from the operating system. Then malloc would have decided to give you a pointer to a single byte inside that page. When you wrote to the memory from the location you were given you were just writing in a "page" that the operating system had granted your program, and thus the operating system will not see any wrong doing.
The real problems, of course, will begin when you continue to call malloc to assign more memory. It will eventually return pointers to the locations you just wrote over. This is called a "buffer overflow" when you write to memory locations that are legal (from an operating system perspective) but could potentially be overwriting memory another part of the program will also be using.
If you continue to learn about this subject you'll begin to understand how programs can be exploited using such "buffer overflow" techniques - even to the point where you begin to write assembly language instructions directly into areas of memory that will be executed by another part of your program.
When you get to this stage you'll have gained much wisdom. But please be ethical and do not use it to wreak havoc in the universe!
PS when I say "operating system" above I really mean "operating system in conjunction with privileged CPU access". The CPU and MMU (memory management unit) triggers particular interrupts or callbacks into the operating system if a process attempts to use a page that has not been allocated to that process. The operating system then cleanly shuts down your application and allows the system to continue functioning. In the old days, before memory management units and privileged CPU instructions, you could practically write anywhere in memory at any time - and then your system would be totally at the mercy of the consequences of that memory write!
No. You get undefined behavior. That means anything can happen, from it crashing (yay) to it "working" (boo), to it reformatting your hard drive and filling it with text files that say "UB, UB, UB..." (wat).
There's no point in wondering what happens after that, because it depends on your compiler, platform, environment, time of day, favorite soda, etc., all of which can do whatever they want as (in)consistently as they want.
More specifically, using any memory you have not allocated is undefined behavior. You get one byte from malloc(1), that's it.
When you ask malloc for 1 byte, it will probably get 1 page (typically 4KB) from the operating system. This page will be allocated to the calling process so as long as you don't go out of the page boundary, you won't have any problems.
Note, however, that it is definitely undefined behavior!
Consider the following (hypothetical) example of what might happen when using malloc:
malloc(1)
If malloc is internally out of memory, it will ask the operating system some more. It will typically receive a page. Say it's 4KB in size with addresses starting at 0x1000
Your call returns giving you the address 0x1000 to use. Since you asked for 1 byte, it is defined behavior if you only use the address 0x1000.
Since the operating system has just allocated 4KB of memory to your process starting at address 0x1000, it will not complain if you read/write something from/to addresses 0x1000-0x1fff. So you can happily do so but it is undefined behavior.
Let's say you do another malloc(1)
Now malloc still has some memory left so it doesn't need to ask the operating system for more. It will probably return the address 0x1001.
If you had written to more than 1 byte using the address given from the first malloc, you will get into troubles when you use the address from the second malloc because you will overwrite the data.
So the point is you definitely get 1 byte from malloc but it might be that malloc internally has more memory allocated to you process.
No. It means that your program behaves badly. It writes to a memory location that it does not own.
You get undefined behavior - anything can happen. Don't do it and don't speculate about whether it works. Maybe it corrupts memory and you don't see it immediately. Only access memory within the allocated block size.
You may be allowed to use until the memory reaches some program memory or other point at which your applicaiton will most likely crash for accessing protected memory
So many responses and only one that gives the right explanation. While the page size, buffer overflow and undefined behaviour stories are true (and important) they do not exactly answer the original question. In fact any sane malloc implementation will allocate at least in size of the alignment requirement of an intor a void *. Why, because if it allocated only 1 byte then the next chunk of memory wouldn't be aligned anymore. There's always some book keeping data around your allocated blocks, these data structures are nearly always aligned to some multiple of 4. While some architectures can access words on unaligned addresses (x86) they do incure some penalties for doing that, so allocator implementer avoid that. Even in slab allocators there's no point in having a 1 byte pool as small size allocs are rare in practice. So it is very likely that there's 4 or 8 bytes real room in your malloc'd byte (this doesn't mean you may use that 'feature', it's wrong).
EDIT: Besides, most malloc reserve bigger chunks than asked for to avoid to many copy operations when calling realloc. As a test you can try using realloc in a loop with growing allocation size and compare the returned pointer, you will see that it changes only after a certain threshold.
You just got lucky there. You are writing to locations which you don't own this leads to undefined behavior.
On most platforms you can not just allocate one byte. There is often also a bit of housekeeping done by malloc to remember the amount of allocated memory. This yields to the fact that you usually "allocate" memory rounded up to the next 4 or 8 bytes. But this is not a defined behaviour.
If you use a few bytes more you'll very likeley get an access violation.
To answer your second question, the standard specifically mandates that malloc(0) be legal. Returned value is implementation-dependent, and can be either NULL or a regular memory address. In either case, you can (and should) legally call free on the return value when done. Even when non-NULL, you must not access data at that address.
malloc allocates the amount of memory you ask in heap and then return a pointer to void (void *) that can be cast to whatever you want.
It is responsibility of the programmer to use only the memory that has been allocate.
Writing (and even reading in protected environment) where you are not supposed can cause all sort of random problems at execution time. If you are lucky your program crash immediately with an exception and you can quite easily find the bug and fix it. If you aren't lucky it will crash randomly or produce unexpected behaviors.
For the Murphy's Law, "Anything that can go wrong, will go wrong" and as a corollary of that, "It will go wrong at the right time, producing the most large amount of damage".
It is sadly true. The only way to prevent that, is to avoid that in the language that you can actually do something like that.
Modern languages do not allow the programmer to do write in memory where he/she is not supposed (at least doing standard programming). That is how Java got a lot of its traction. I prefer C++ to C. You can still make damages using pointers but it is less likely. That is the reason why Smart Pointers are so popular.
In order to fix these kind of problems, a debug version of the malloc library can be handy. You need to call a check function periodically to sense if the memory was corrupted.
When I used to work intensively on C/C++ at work, we used Rational Purify that in practice replace the standard malloc (new in C++) and free (delete in C++) and it is able to return quite accurate report on where the program did something it was not supposed. However you will never be sure 100% that you do not have any error in your code. If you have a condition that happen extremely rarely, when you execute the program you may not incur in that condition. It will eventually happen in production on the most busy day on the most sensitive data (according to Murphy's Law ;-)
It could be that you're in Debug mode, where a call to malloc will actually call _malloc_dbg. The debug version will allocate more space than you have requested to cope with buffer overflows. I guess that if you ran this in Release mode you might (hopefully) get a crash instead.
You should use new and delete operators in c++... And a safe pointer to control that operations doesn't reach the limit of the array allocated...
There is no "C runtime". C is glorified assembler. It will happily let you walk all over the address space and do whatever you want with it, which is why it's the language of choice for writing OS kernels. Your program is an example of a heap corruption bug, which is a common security vulnerability. If you wrote a long enough string to that address, you'd eventually overrun the end of the heap and get a segmentation fault, but not before you overwrote a lot of other important things first.
When malloc() doesn't have enough free memory in its reserve pool to satisfy an allocation, it grabs pages from the kernel in chunks of at least 4 kb, and often much larger, so you're probably writing into reserved but un-malloc()ed space when you initially exceed the bounds of your allocation, which is why your test case always works. Actually honoring allocation addresses and sizes is completely voluntary, so you can assign a random address to a pointer, without calling malloc() at all, and start working with that as a character string, and as long as that random address happens to be in a writable memory segment like the heap or the stack, everything will seem to work, at least until you try to use whatever memory you were corrupting by doing so.
strcpy() doesn't check if the memory it's writing to is allocated. It just takes the destination address and writes the source character by character until it reaches the '\0'. So, if the destination memory allocated is smaller than the source, you just wrote over memory. This is a dangerous bug because it is very hard to track down.
puts() writes the string until it reaches '\0'.
My guess is that malloc(0) only returns NULL and not cause a run-time error.
My answer is in responce to Why does printf not seg fault or produce garbage?
From
The C programming language by Denis Ritchie & Kernighan
typedef long Align; /* for alignment to long boundary */
union header { /* block header */
struct {
union header *ptr; /* next block if on free list */
unsigned size; /* size of this block */
} s;
Align x; /* force alignment of blocks */
};
typedef union header Header;
The Align field is never used;it just forces each header to be aligned on a worst-case boundary.
In malloc,the requested size in characters is rounded up to the proper number of header-sized units; the block that will be allocated contains
one more unit, for the header itself, and this is the value recorded in the
size field of the header.
The pointer returned by malloc points at the free space, not at the header itself.
The user can do anything with the space requested, but if anything is written outside of the allocated space the list is likely to be scrambled.
-----------------------------------------
| | SIZE | |
-----------------------------------------
| |
points to |-----address returned touser
next free
block
-> a block returned by malloc
In statement
char* test = malloc(1);
malloc() will try to search consecutive bytes from the heap section of RAM if requested bytes are available and it returns the address as below
--------------------------------------------------------------
| free memory | memory in size allocated for user | |
----------------------------------------------------------------
0x100(assume address returned by malloc)
test
So when malloc(1) executed it won't allocate just 1 byte, it allocated some extra bytes to maintain above structure/heap table. you can find out how much actual memory allocated when you requested only 1 byte by printing test[-1] because just to before that block contain the size.
char* test = malloc(1);
printf("memory allocated in bytes = %d\n",test[-1]);
If the size passed is zero, and ptr is not NULL then the call is equivalent to free.
char *cp = (char *) malloc(1);
strcpy(cp, "123456789");
puts(cp);
output is "123456789" on both gcc (Linux) and Visual C++ Express, does that mean when there is free memory, I can actually use more than what I've allocated with malloc()?
and why malloc(0) doesn't cause runtime error?
Thanks.
You've asked a very good question and maybe this will whet your appetite about operating systems. Already you know you've managed to achieve something with this code that you wouldn't ordinarily expect to do. So you would never do this in code you want to make portable.
To be more specific, and this depends entirely on your operating system and CPU architecture, the operating system allocates "pages" of memory to your program - typically this can be in the order of 4 kilobytes. The operating system is the guardian of pages and will immediately terminate any program that attempts to access a page it has not been assigned.
malloc, on the other hand, is not an operating system function but a C library call. It can be implemented in many ways. It is likely that your call to malloc resulted in a page request from the operating system. Then malloc would have decided to give you a pointer to a single byte inside that page. When you wrote to the memory from the location you were given you were just writing in a "page" that the operating system had granted your program, and thus the operating system will not see any wrong doing.
The real problems, of course, will begin when you continue to call malloc to assign more memory. It will eventually return pointers to the locations you just wrote over. This is called a "buffer overflow" when you write to memory locations that are legal (from an operating system perspective) but could potentially be overwriting memory another part of the program will also be using.
If you continue to learn about this subject you'll begin to understand how programs can be exploited using such "buffer overflow" techniques - even to the point where you begin to write assembly language instructions directly into areas of memory that will be executed by another part of your program.
When you get to this stage you'll have gained much wisdom. But please be ethical and do not use it to wreak havoc in the universe!
PS when I say "operating system" above I really mean "operating system in conjunction with privileged CPU access". The CPU and MMU (memory management unit) triggers particular interrupts or callbacks into the operating system if a process attempts to use a page that has not been allocated to that process. The operating system then cleanly shuts down your application and allows the system to continue functioning. In the old days, before memory management units and privileged CPU instructions, you could practically write anywhere in memory at any time - and then your system would be totally at the mercy of the consequences of that memory write!
No. You get undefined behavior. That means anything can happen, from it crashing (yay) to it "working" (boo), to it reformatting your hard drive and filling it with text files that say "UB, UB, UB..." (wat).
There's no point in wondering what happens after that, because it depends on your compiler, platform, environment, time of day, favorite soda, etc., all of which can do whatever they want as (in)consistently as they want.
More specifically, using any memory you have not allocated is undefined behavior. You get one byte from malloc(1), that's it.
When you ask malloc for 1 byte, it will probably get 1 page (typically 4KB) from the operating system. This page will be allocated to the calling process so as long as you don't go out of the page boundary, you won't have any problems.
Note, however, that it is definitely undefined behavior!
Consider the following (hypothetical) example of what might happen when using malloc:
malloc(1)
If malloc is internally out of memory, it will ask the operating system some more. It will typically receive a page. Say it's 4KB in size with addresses starting at 0x1000
Your call returns giving you the address 0x1000 to use. Since you asked for 1 byte, it is defined behavior if you only use the address 0x1000.
Since the operating system has just allocated 4KB of memory to your process starting at address 0x1000, it will not complain if you read/write something from/to addresses 0x1000-0x1fff. So you can happily do so but it is undefined behavior.
Let's say you do another malloc(1)
Now malloc still has some memory left so it doesn't need to ask the operating system for more. It will probably return the address 0x1001.
If you had written to more than 1 byte using the address given from the first malloc, you will get into troubles when you use the address from the second malloc because you will overwrite the data.
So the point is you definitely get 1 byte from malloc but it might be that malloc internally has more memory allocated to you process.
No. It means that your program behaves badly. It writes to a memory location that it does not own.
You get undefined behavior - anything can happen. Don't do it and don't speculate about whether it works. Maybe it corrupts memory and you don't see it immediately. Only access memory within the allocated block size.
You may be allowed to use until the memory reaches some program memory or other point at which your applicaiton will most likely crash for accessing protected memory
So many responses and only one that gives the right explanation. While the page size, buffer overflow and undefined behaviour stories are true (and important) they do not exactly answer the original question. In fact any sane malloc implementation will allocate at least in size of the alignment requirement of an intor a void *. Why, because if it allocated only 1 byte then the next chunk of memory wouldn't be aligned anymore. There's always some book keeping data around your allocated blocks, these data structures are nearly always aligned to some multiple of 4. While some architectures can access words on unaligned addresses (x86) they do incure some penalties for doing that, so allocator implementer avoid that. Even in slab allocators there's no point in having a 1 byte pool as small size allocs are rare in practice. So it is very likely that there's 4 or 8 bytes real room in your malloc'd byte (this doesn't mean you may use that 'feature', it's wrong).
EDIT: Besides, most malloc reserve bigger chunks than asked for to avoid to many copy operations when calling realloc. As a test you can try using realloc in a loop with growing allocation size and compare the returned pointer, you will see that it changes only after a certain threshold.
You just got lucky there. You are writing to locations which you don't own this leads to undefined behavior.
On most platforms you can not just allocate one byte. There is often also a bit of housekeeping done by malloc to remember the amount of allocated memory. This yields to the fact that you usually "allocate" memory rounded up to the next 4 or 8 bytes. But this is not a defined behaviour.
If you use a few bytes more you'll very likeley get an access violation.
To answer your second question, the standard specifically mandates that malloc(0) be legal. Returned value is implementation-dependent, and can be either NULL or a regular memory address. In either case, you can (and should) legally call free on the return value when done. Even when non-NULL, you must not access data at that address.
malloc allocates the amount of memory you ask in heap and then return a pointer to void (void *) that can be cast to whatever you want.
It is responsibility of the programmer to use only the memory that has been allocate.
Writing (and even reading in protected environment) where you are not supposed can cause all sort of random problems at execution time. If you are lucky your program crash immediately with an exception and you can quite easily find the bug and fix it. If you aren't lucky it will crash randomly or produce unexpected behaviors.
For the Murphy's Law, "Anything that can go wrong, will go wrong" and as a corollary of that, "It will go wrong at the right time, producing the most large amount of damage".
It is sadly true. The only way to prevent that, is to avoid that in the language that you can actually do something like that.
Modern languages do not allow the programmer to do write in memory where he/she is not supposed (at least doing standard programming). That is how Java got a lot of its traction. I prefer C++ to C. You can still make damages using pointers but it is less likely. That is the reason why Smart Pointers are so popular.
In order to fix these kind of problems, a debug version of the malloc library can be handy. You need to call a check function periodically to sense if the memory was corrupted.
When I used to work intensively on C/C++ at work, we used Rational Purify that in practice replace the standard malloc (new in C++) and free (delete in C++) and it is able to return quite accurate report on where the program did something it was not supposed. However you will never be sure 100% that you do not have any error in your code. If you have a condition that happen extremely rarely, when you execute the program you may not incur in that condition. It will eventually happen in production on the most busy day on the most sensitive data (according to Murphy's Law ;-)
It could be that you're in Debug mode, where a call to malloc will actually call _malloc_dbg. The debug version will allocate more space than you have requested to cope with buffer overflows. I guess that if you ran this in Release mode you might (hopefully) get a crash instead.
You should use new and delete operators in c++... And a safe pointer to control that operations doesn't reach the limit of the array allocated...
There is no "C runtime". C is glorified assembler. It will happily let you walk all over the address space and do whatever you want with it, which is why it's the language of choice for writing OS kernels. Your program is an example of a heap corruption bug, which is a common security vulnerability. If you wrote a long enough string to that address, you'd eventually overrun the end of the heap and get a segmentation fault, but not before you overwrote a lot of other important things first.
When malloc() doesn't have enough free memory in its reserve pool to satisfy an allocation, it grabs pages from the kernel in chunks of at least 4 kb, and often much larger, so you're probably writing into reserved but un-malloc()ed space when you initially exceed the bounds of your allocation, which is why your test case always works. Actually honoring allocation addresses and sizes is completely voluntary, so you can assign a random address to a pointer, without calling malloc() at all, and start working with that as a character string, and as long as that random address happens to be in a writable memory segment like the heap or the stack, everything will seem to work, at least until you try to use whatever memory you were corrupting by doing so.
strcpy() doesn't check if the memory it's writing to is allocated. It just takes the destination address and writes the source character by character until it reaches the '\0'. So, if the destination memory allocated is smaller than the source, you just wrote over memory. This is a dangerous bug because it is very hard to track down.
puts() writes the string until it reaches '\0'.
My guess is that malloc(0) only returns NULL and not cause a run-time error.
My answer is in responce to Why does printf not seg fault or produce garbage?
From
The C programming language by Denis Ritchie & Kernighan
typedef long Align; /* for alignment to long boundary */
union header { /* block header */
struct {
union header *ptr; /* next block if on free list */
unsigned size; /* size of this block */
} s;
Align x; /* force alignment of blocks */
};
typedef union header Header;
The Align field is never used;it just forces each header to be aligned on a worst-case boundary.
In malloc,the requested size in characters is rounded up to the proper number of header-sized units; the block that will be allocated contains
one more unit, for the header itself, and this is the value recorded in the
size field of the header.
The pointer returned by malloc points at the free space, not at the header itself.
The user can do anything with the space requested, but if anything is written outside of the allocated space the list is likely to be scrambled.
-----------------------------------------
| | SIZE | |
-----------------------------------------
| |
points to |-----address returned touser
next free
block
-> a block returned by malloc
In statement
char* test = malloc(1);
malloc() will try to search consecutive bytes from the heap section of RAM if requested bytes are available and it returns the address as below
--------------------------------------------------------------
| free memory | memory in size allocated for user | |
----------------------------------------------------------------
0x100(assume address returned by malloc)
test
So when malloc(1) executed it won't allocate just 1 byte, it allocated some extra bytes to maintain above structure/heap table. you can find out how much actual memory allocated when you requested only 1 byte by printing test[-1] because just to before that block contain the size.
char* test = malloc(1);
printf("memory allocated in bytes = %d\n",test[-1]);
If the size passed is zero, and ptr is not NULL then the call is equivalent to free.
char *cp = (char *) malloc(1);
strcpy(cp, "123456789");
puts(cp);
output is "123456789" on both gcc (Linux) and Visual C++ Express, does that mean when there is free memory, I can actually use more than what I've allocated with malloc()?
and why malloc(0) doesn't cause runtime error?
Thanks.
You've asked a very good question and maybe this will whet your appetite about operating systems. Already you know you've managed to achieve something with this code that you wouldn't ordinarily expect to do. So you would never do this in code you want to make portable.
To be more specific, and this depends entirely on your operating system and CPU architecture, the operating system allocates "pages" of memory to your program - typically this can be in the order of 4 kilobytes. The operating system is the guardian of pages and will immediately terminate any program that attempts to access a page it has not been assigned.
malloc, on the other hand, is not an operating system function but a C library call. It can be implemented in many ways. It is likely that your call to malloc resulted in a page request from the operating system. Then malloc would have decided to give you a pointer to a single byte inside that page. When you wrote to the memory from the location you were given you were just writing in a "page" that the operating system had granted your program, and thus the operating system will not see any wrong doing.
The real problems, of course, will begin when you continue to call malloc to assign more memory. It will eventually return pointers to the locations you just wrote over. This is called a "buffer overflow" when you write to memory locations that are legal (from an operating system perspective) but could potentially be overwriting memory another part of the program will also be using.
If you continue to learn about this subject you'll begin to understand how programs can be exploited using such "buffer overflow" techniques - even to the point where you begin to write assembly language instructions directly into areas of memory that will be executed by another part of your program.
When you get to this stage you'll have gained much wisdom. But please be ethical and do not use it to wreak havoc in the universe!
PS when I say "operating system" above I really mean "operating system in conjunction with privileged CPU access". The CPU and MMU (memory management unit) triggers particular interrupts or callbacks into the operating system if a process attempts to use a page that has not been allocated to that process. The operating system then cleanly shuts down your application and allows the system to continue functioning. In the old days, before memory management units and privileged CPU instructions, you could practically write anywhere in memory at any time - and then your system would be totally at the mercy of the consequences of that memory write!
No. You get undefined behavior. That means anything can happen, from it crashing (yay) to it "working" (boo), to it reformatting your hard drive and filling it with text files that say "UB, UB, UB..." (wat).
There's no point in wondering what happens after that, because it depends on your compiler, platform, environment, time of day, favorite soda, etc., all of which can do whatever they want as (in)consistently as they want.
More specifically, using any memory you have not allocated is undefined behavior. You get one byte from malloc(1), that's it.
When you ask malloc for 1 byte, it will probably get 1 page (typically 4KB) from the operating system. This page will be allocated to the calling process so as long as you don't go out of the page boundary, you won't have any problems.
Note, however, that it is definitely undefined behavior!
Consider the following (hypothetical) example of what might happen when using malloc:
malloc(1)
If malloc is internally out of memory, it will ask the operating system some more. It will typically receive a page. Say it's 4KB in size with addresses starting at 0x1000
Your call returns giving you the address 0x1000 to use. Since you asked for 1 byte, it is defined behavior if you only use the address 0x1000.
Since the operating system has just allocated 4KB of memory to your process starting at address 0x1000, it will not complain if you read/write something from/to addresses 0x1000-0x1fff. So you can happily do so but it is undefined behavior.
Let's say you do another malloc(1)
Now malloc still has some memory left so it doesn't need to ask the operating system for more. It will probably return the address 0x1001.
If you had written to more than 1 byte using the address given from the first malloc, you will get into troubles when you use the address from the second malloc because you will overwrite the data.
So the point is you definitely get 1 byte from malloc but it might be that malloc internally has more memory allocated to you process.
No. It means that your program behaves badly. It writes to a memory location that it does not own.
You get undefined behavior - anything can happen. Don't do it and don't speculate about whether it works. Maybe it corrupts memory and you don't see it immediately. Only access memory within the allocated block size.
You may be allowed to use until the memory reaches some program memory or other point at which your applicaiton will most likely crash for accessing protected memory
So many responses and only one that gives the right explanation. While the page size, buffer overflow and undefined behaviour stories are true (and important) they do not exactly answer the original question. In fact any sane malloc implementation will allocate at least in size of the alignment requirement of an intor a void *. Why, because if it allocated only 1 byte then the next chunk of memory wouldn't be aligned anymore. There's always some book keeping data around your allocated blocks, these data structures are nearly always aligned to some multiple of 4. While some architectures can access words on unaligned addresses (x86) they do incure some penalties for doing that, so allocator implementer avoid that. Even in slab allocators there's no point in having a 1 byte pool as small size allocs are rare in practice. So it is very likely that there's 4 or 8 bytes real room in your malloc'd byte (this doesn't mean you may use that 'feature', it's wrong).
EDIT: Besides, most malloc reserve bigger chunks than asked for to avoid to many copy operations when calling realloc. As a test you can try using realloc in a loop with growing allocation size and compare the returned pointer, you will see that it changes only after a certain threshold.
You just got lucky there. You are writing to locations which you don't own this leads to undefined behavior.
On most platforms you can not just allocate one byte. There is often also a bit of housekeeping done by malloc to remember the amount of allocated memory. This yields to the fact that you usually "allocate" memory rounded up to the next 4 or 8 bytes. But this is not a defined behaviour.
If you use a few bytes more you'll very likeley get an access violation.
To answer your second question, the standard specifically mandates that malloc(0) be legal. Returned value is implementation-dependent, and can be either NULL or a regular memory address. In either case, you can (and should) legally call free on the return value when done. Even when non-NULL, you must not access data at that address.
malloc allocates the amount of memory you ask in heap and then return a pointer to void (void *) that can be cast to whatever you want.
It is responsibility of the programmer to use only the memory that has been allocate.
Writing (and even reading in protected environment) where you are not supposed can cause all sort of random problems at execution time. If you are lucky your program crash immediately with an exception and you can quite easily find the bug and fix it. If you aren't lucky it will crash randomly or produce unexpected behaviors.
For the Murphy's Law, "Anything that can go wrong, will go wrong" and as a corollary of that, "It will go wrong at the right time, producing the most large amount of damage".
It is sadly true. The only way to prevent that, is to avoid that in the language that you can actually do something like that.
Modern languages do not allow the programmer to do write in memory where he/she is not supposed (at least doing standard programming). That is how Java got a lot of its traction. I prefer C++ to C. You can still make damages using pointers but it is less likely. That is the reason why Smart Pointers are so popular.
In order to fix these kind of problems, a debug version of the malloc library can be handy. You need to call a check function periodically to sense if the memory was corrupted.
When I used to work intensively on C/C++ at work, we used Rational Purify that in practice replace the standard malloc (new in C++) and free (delete in C++) and it is able to return quite accurate report on where the program did something it was not supposed. However you will never be sure 100% that you do not have any error in your code. If you have a condition that happen extremely rarely, when you execute the program you may not incur in that condition. It will eventually happen in production on the most busy day on the most sensitive data (according to Murphy's Law ;-)
It could be that you're in Debug mode, where a call to malloc will actually call _malloc_dbg. The debug version will allocate more space than you have requested to cope with buffer overflows. I guess that if you ran this in Release mode you might (hopefully) get a crash instead.
You should use new and delete operators in c++... And a safe pointer to control that operations doesn't reach the limit of the array allocated...
There is no "C runtime". C is glorified assembler. It will happily let you walk all over the address space and do whatever you want with it, which is why it's the language of choice for writing OS kernels. Your program is an example of a heap corruption bug, which is a common security vulnerability. If you wrote a long enough string to that address, you'd eventually overrun the end of the heap and get a segmentation fault, but not before you overwrote a lot of other important things first.
When malloc() doesn't have enough free memory in its reserve pool to satisfy an allocation, it grabs pages from the kernel in chunks of at least 4 kb, and often much larger, so you're probably writing into reserved but un-malloc()ed space when you initially exceed the bounds of your allocation, which is why your test case always works. Actually honoring allocation addresses and sizes is completely voluntary, so you can assign a random address to a pointer, without calling malloc() at all, and start working with that as a character string, and as long as that random address happens to be in a writable memory segment like the heap or the stack, everything will seem to work, at least until you try to use whatever memory you were corrupting by doing so.
strcpy() doesn't check if the memory it's writing to is allocated. It just takes the destination address and writes the source character by character until it reaches the '\0'. So, if the destination memory allocated is smaller than the source, you just wrote over memory. This is a dangerous bug because it is very hard to track down.
puts() writes the string until it reaches '\0'.
My guess is that malloc(0) only returns NULL and not cause a run-time error.
My answer is in responce to Why does printf not seg fault or produce garbage?
From
The C programming language by Denis Ritchie & Kernighan
typedef long Align; /* for alignment to long boundary */
union header { /* block header */
struct {
union header *ptr; /* next block if on free list */
unsigned size; /* size of this block */
} s;
Align x; /* force alignment of blocks */
};
typedef union header Header;
The Align field is never used;it just forces each header to be aligned on a worst-case boundary.
In malloc,the requested size in characters is rounded up to the proper number of header-sized units; the block that will be allocated contains
one more unit, for the header itself, and this is the value recorded in the
size field of the header.
The pointer returned by malloc points at the free space, not at the header itself.
The user can do anything with the space requested, but if anything is written outside of the allocated space the list is likely to be scrambled.
-----------------------------------------
| | SIZE | |
-----------------------------------------
| |
points to |-----address returned touser
next free
block
-> a block returned by malloc
In statement
char* test = malloc(1);
malloc() will try to search consecutive bytes from the heap section of RAM if requested bytes are available and it returns the address as below
--------------------------------------------------------------
| free memory | memory in size allocated for user | |
----------------------------------------------------------------
0x100(assume address returned by malloc)
test
So when malloc(1) executed it won't allocate just 1 byte, it allocated some extra bytes to maintain above structure/heap table. you can find out how much actual memory allocated when you requested only 1 byte by printing test[-1] because just to before that block contain the size.
char* test = malloc(1);
printf("memory allocated in bytes = %d\n",test[-1]);
If the size passed is zero, and ptr is not NULL then the call is equivalent to free.
char *cp = (char *) malloc(1);
strcpy(cp, "123456789");
puts(cp);
output is "123456789" on both gcc (Linux) and Visual C++ Express, does that mean when there is free memory, I can actually use more than what I've allocated with malloc()?
and why malloc(0) doesn't cause runtime error?
Thanks.
You've asked a very good question and maybe this will whet your appetite about operating systems. Already you know you've managed to achieve something with this code that you wouldn't ordinarily expect to do. So you would never do this in code you want to make portable.
To be more specific, and this depends entirely on your operating system and CPU architecture, the operating system allocates "pages" of memory to your program - typically this can be in the order of 4 kilobytes. The operating system is the guardian of pages and will immediately terminate any program that attempts to access a page it has not been assigned.
malloc, on the other hand, is not an operating system function but a C library call. It can be implemented in many ways. It is likely that your call to malloc resulted in a page request from the operating system. Then malloc would have decided to give you a pointer to a single byte inside that page. When you wrote to the memory from the location you were given you were just writing in a "page" that the operating system had granted your program, and thus the operating system will not see any wrong doing.
The real problems, of course, will begin when you continue to call malloc to assign more memory. It will eventually return pointers to the locations you just wrote over. This is called a "buffer overflow" when you write to memory locations that are legal (from an operating system perspective) but could potentially be overwriting memory another part of the program will also be using.
If you continue to learn about this subject you'll begin to understand how programs can be exploited using such "buffer overflow" techniques - even to the point where you begin to write assembly language instructions directly into areas of memory that will be executed by another part of your program.
When you get to this stage you'll have gained much wisdom. But please be ethical and do not use it to wreak havoc in the universe!
PS when I say "operating system" above I really mean "operating system in conjunction with privileged CPU access". The CPU and MMU (memory management unit) triggers particular interrupts or callbacks into the operating system if a process attempts to use a page that has not been allocated to that process. The operating system then cleanly shuts down your application and allows the system to continue functioning. In the old days, before memory management units and privileged CPU instructions, you could practically write anywhere in memory at any time - and then your system would be totally at the mercy of the consequences of that memory write!
No. You get undefined behavior. That means anything can happen, from it crashing (yay) to it "working" (boo), to it reformatting your hard drive and filling it with text files that say "UB, UB, UB..." (wat).
There's no point in wondering what happens after that, because it depends on your compiler, platform, environment, time of day, favorite soda, etc., all of which can do whatever they want as (in)consistently as they want.
More specifically, using any memory you have not allocated is undefined behavior. You get one byte from malloc(1), that's it.
When you ask malloc for 1 byte, it will probably get 1 page (typically 4KB) from the operating system. This page will be allocated to the calling process so as long as you don't go out of the page boundary, you won't have any problems.
Note, however, that it is definitely undefined behavior!
Consider the following (hypothetical) example of what might happen when using malloc:
malloc(1)
If malloc is internally out of memory, it will ask the operating system some more. It will typically receive a page. Say it's 4KB in size with addresses starting at 0x1000
Your call returns giving you the address 0x1000 to use. Since you asked for 1 byte, it is defined behavior if you only use the address 0x1000.
Since the operating system has just allocated 4KB of memory to your process starting at address 0x1000, it will not complain if you read/write something from/to addresses 0x1000-0x1fff. So you can happily do so but it is undefined behavior.
Let's say you do another malloc(1)
Now malloc still has some memory left so it doesn't need to ask the operating system for more. It will probably return the address 0x1001.
If you had written to more than 1 byte using the address given from the first malloc, you will get into troubles when you use the address from the second malloc because you will overwrite the data.
So the point is you definitely get 1 byte from malloc but it might be that malloc internally has more memory allocated to you process.
No. It means that your program behaves badly. It writes to a memory location that it does not own.
You get undefined behavior - anything can happen. Don't do it and don't speculate about whether it works. Maybe it corrupts memory and you don't see it immediately. Only access memory within the allocated block size.
You may be allowed to use until the memory reaches some program memory or other point at which your applicaiton will most likely crash for accessing protected memory
So many responses and only one that gives the right explanation. While the page size, buffer overflow and undefined behaviour stories are true (and important) they do not exactly answer the original question. In fact any sane malloc implementation will allocate at least in size of the alignment requirement of an intor a void *. Why, because if it allocated only 1 byte then the next chunk of memory wouldn't be aligned anymore. There's always some book keeping data around your allocated blocks, these data structures are nearly always aligned to some multiple of 4. While some architectures can access words on unaligned addresses (x86) they do incure some penalties for doing that, so allocator implementer avoid that. Even in slab allocators there's no point in having a 1 byte pool as small size allocs are rare in practice. So it is very likely that there's 4 or 8 bytes real room in your malloc'd byte (this doesn't mean you may use that 'feature', it's wrong).
EDIT: Besides, most malloc reserve bigger chunks than asked for to avoid to many copy operations when calling realloc. As a test you can try using realloc in a loop with growing allocation size and compare the returned pointer, you will see that it changes only after a certain threshold.
You just got lucky there. You are writing to locations which you don't own this leads to undefined behavior.
On most platforms you can not just allocate one byte. There is often also a bit of housekeeping done by malloc to remember the amount of allocated memory. This yields to the fact that you usually "allocate" memory rounded up to the next 4 or 8 bytes. But this is not a defined behaviour.
If you use a few bytes more you'll very likeley get an access violation.
To answer your second question, the standard specifically mandates that malloc(0) be legal. Returned value is implementation-dependent, and can be either NULL or a regular memory address. In either case, you can (and should) legally call free on the return value when done. Even when non-NULL, you must not access data at that address.
malloc allocates the amount of memory you ask in heap and then return a pointer to void (void *) that can be cast to whatever you want.
It is responsibility of the programmer to use only the memory that has been allocate.
Writing (and even reading in protected environment) where you are not supposed can cause all sort of random problems at execution time. If you are lucky your program crash immediately with an exception and you can quite easily find the bug and fix it. If you aren't lucky it will crash randomly or produce unexpected behaviors.
For the Murphy's Law, "Anything that can go wrong, will go wrong" and as a corollary of that, "It will go wrong at the right time, producing the most large amount of damage".
It is sadly true. The only way to prevent that, is to avoid that in the language that you can actually do something like that.
Modern languages do not allow the programmer to do write in memory where he/she is not supposed (at least doing standard programming). That is how Java got a lot of its traction. I prefer C++ to C. You can still make damages using pointers but it is less likely. That is the reason why Smart Pointers are so popular.
In order to fix these kind of problems, a debug version of the malloc library can be handy. You need to call a check function periodically to sense if the memory was corrupted.
When I used to work intensively on C/C++ at work, we used Rational Purify that in practice replace the standard malloc (new in C++) and free (delete in C++) and it is able to return quite accurate report on where the program did something it was not supposed. However you will never be sure 100% that you do not have any error in your code. If you have a condition that happen extremely rarely, when you execute the program you may not incur in that condition. It will eventually happen in production on the most busy day on the most sensitive data (according to Murphy's Law ;-)
It could be that you're in Debug mode, where a call to malloc will actually call _malloc_dbg. The debug version will allocate more space than you have requested to cope with buffer overflows. I guess that if you ran this in Release mode you might (hopefully) get a crash instead.
You should use new and delete operators in c++... And a safe pointer to control that operations doesn't reach the limit of the array allocated...
There is no "C runtime". C is glorified assembler. It will happily let you walk all over the address space and do whatever you want with it, which is why it's the language of choice for writing OS kernels. Your program is an example of a heap corruption bug, which is a common security vulnerability. If you wrote a long enough string to that address, you'd eventually overrun the end of the heap and get a segmentation fault, but not before you overwrote a lot of other important things first.
When malloc() doesn't have enough free memory in its reserve pool to satisfy an allocation, it grabs pages from the kernel in chunks of at least 4 kb, and often much larger, so you're probably writing into reserved but un-malloc()ed space when you initially exceed the bounds of your allocation, which is why your test case always works. Actually honoring allocation addresses and sizes is completely voluntary, so you can assign a random address to a pointer, without calling malloc() at all, and start working with that as a character string, and as long as that random address happens to be in a writable memory segment like the heap or the stack, everything will seem to work, at least until you try to use whatever memory you were corrupting by doing so.
strcpy() doesn't check if the memory it's writing to is allocated. It just takes the destination address and writes the source character by character until it reaches the '\0'. So, if the destination memory allocated is smaller than the source, you just wrote over memory. This is a dangerous bug because it is very hard to track down.
puts() writes the string until it reaches '\0'.
My guess is that malloc(0) only returns NULL and not cause a run-time error.
My answer is in responce to Why does printf not seg fault or produce garbage?
From
The C programming language by Denis Ritchie & Kernighan
typedef long Align; /* for alignment to long boundary */
union header { /* block header */
struct {
union header *ptr; /* next block if on free list */
unsigned size; /* size of this block */
} s;
Align x; /* force alignment of blocks */
};
typedef union header Header;
The Align field is never used;it just forces each header to be aligned on a worst-case boundary.
In malloc,the requested size in characters is rounded up to the proper number of header-sized units; the block that will be allocated contains
one more unit, for the header itself, and this is the value recorded in the
size field of the header.
The pointer returned by malloc points at the free space, not at the header itself.
The user can do anything with the space requested, but if anything is written outside of the allocated space the list is likely to be scrambled.
-----------------------------------------
| | SIZE | |
-----------------------------------------
| |
points to |-----address returned touser
next free
block
-> a block returned by malloc
In statement
char* test = malloc(1);
malloc() will try to search consecutive bytes from the heap section of RAM if requested bytes are available and it returns the address as below
--------------------------------------------------------------
| free memory | memory in size allocated for user | |
----------------------------------------------------------------
0x100(assume address returned by malloc)
test
So when malloc(1) executed it won't allocate just 1 byte, it allocated some extra bytes to maintain above structure/heap table. you can find out how much actual memory allocated when you requested only 1 byte by printing test[-1] because just to before that block contain the size.
char* test = malloc(1);
printf("memory allocated in bytes = %d\n",test[-1]);
If the size passed is zero, and ptr is not NULL then the call is equivalent to free.
Trying to understand answers to my question
what happens when tried to free memory allocated by heap manager, which allocates more than asked for?
I wrote this function and puzzled by its output
int main(int argc,char **argv){
char *p,*q;
p=malloc(1);
strcpy(p,"01234556789abcdefghijklmnopqrstuvwxyz"); //since malloc allocates atleast 1 byte
q=malloc(2);
// free(q);
printf("q=%s\n",q);
printf("p=%s\n",p);
return 0;
}
Output
q=vwxyz
p=01234556789abcdefghijklm!
Can any one explain this behavior? or is this implementation specific?
also if free(q) is uncommented, I am getting SIGABRT.
You are copying more bytes to *p than you have allocated, overwriting whatever might have been at the memory locations after the allocated space.
When you then call malloc again, it takes a part of memory it knows to be unused at the moment (which happens to be a few bytes after *p this time), writes some bookkeeping information there and returns a new pointer to that location.
The bookkeeping information malloc writes happens to start with a '!' in this run, followed by a zero byte, so your first string is truncated. The new pointer happens point to the end of the memory you overwrote before.
All this is implementation specific and might lead to different results each run or depending on the phase of the moon. The second call to malloc() would also absolutely be in its right to just crash the program in horrible ways (especially since you might be overwriting memory that malloc uses internally).
You are just being lucky this time: this is an undefined behavior and don't count on it.
Ususally, but depending on the OS, memory is allocated in "pages" (i.e. multiple bytes). Malloc() on the other hand allocates memory from those "pages" in a more "granular" way: there is "overhead" associated with each allocation being managed through malloc.
The signal you are getting from free is most probably related to the fact that you mess up the memory management by writing past what you were allocated with p i.e. writing on the overhead information used by the memory manager to keep track of memory blocks etc.
This is a classical heap overflow. p has only 1 byte, but the heap manager pads the allocation (32 bytes in your case). q is allocated right after p, so it naturally gets the next available spot. For example if the address of p is 0x1000, the adress that gets assigned to q is 0x1020. This explains why q points to part of the string.
The more interesting question is why p is only "01234556789abcdefghijklm" and not "01234556789abcdefghijklmnopqrstuvwxyz". The reason is that memory manager uses the gaps between allocation for its internal bookkeeping. From a memory manager perspective the memory layout is as following:
p D q
where D is internal data structure of memory manager (0x1010 to 0x1020 in our example). While allocating memory for q, the heap manager writes its stuff to the bookkeeping area (0x1010 to 0x1020). A byte is changed to 0 truncates the string since it is treated as NULL terminator.
THE VALUE OF "p":
you allocated enough space to fit this: ""
[[ strings are null terminated, remember? you don't see it, but it's there -- so that's one byte used up. ]]
but you are trying to store this: "01234556789abcdefghijklmnopqrstuvwxyz"
the result, therefore, is that the "stuff" starting with "123.." is being stored beyond the memory you allocated -- possibly writing over other "stuff" elsewhere. as such your results will be messy, and as "jidupont" said you're lucky that it doesn't just crash.
OUTPUT OF PRINTING [BROKEN] "p"
as said, you've written way past the end of "p"; but malloc doesn't know this. so when you asked for another block of memory for "q", maybe it gave you the memory following what it gave you for "p"; and maybe it aligned the memory (typical) so it's pointer is rounded up to some nice number; and then maybe it uses some of this memory to store bookkeeping information you're not supposed to be concerned with. but you don't know, do you? you're not supposed to know either -- you're just not supposed to write to memory that you haven't allocated yourself!
and the result? you see some of what you expected -- but it's truncated! because ... another block was perhaps allocated IN the memory you used (and used without permission, i might add), or something else owned that block and changed it, and in any case some values were changed -- resulting in: "01234556789abcdefghijklm!". again, lucky that things didn't just explode.
FREEING "q"
if you free "q", then try to access it -- as you are doing by trying to print it -- you will (usually) get a nasty error. this is well deserved. you shouldn't uncomment that "free(q)". but you also shouldn't try to print "q", because you haven't put anything there yet! for all you know, it might contain gibberish, and so print will continue until it encounters a NULL -- which may not happen until the end of the world -- or, more likely, until your program accesses yet more memory that it shouldn't, and crashes because the OS is not happy with you. :)
It shouldn't be that puzzling that intentionally misusing these functions will give nonsensical results.
Two consecutive mallocs are not guaranteed to give you two consecutive areas of memory. malloc may choose to allocate more than the amount of memory you requested, but not less if the allocation succeeds. The behavior of your program when you choose to overwrite unallocated memory is not guaranteed to be predictable.
This is just the way C is. You can easily misuse the returned memory areas from malloc and the language doesn't care. It just assumes that in a correct program you will never do so, and everything else is up for grabs.
Malloc is a function just like yours :)
There is a lot of malloc implementations so i won't go into useless details.
At the first call malloc it asks memory to the system. For the example let's say 4096 which is the standard memory page size which is good. So you call malloc asking for 1 byte. The function malloc will asks 4096 bytes to the system. Next, it will use a small part of this memory to store internal data such the positions of the available blocks. Then it will cut one part of this block and send it back to you.
An internal algorithm will trys to reuse the blocks after a call to free to avoid re-asking memory to the system.
So with this little explanation you can now understand why you code is working.
You are writing in the memory asked my malloc to the system. This comportment doesn't bother the system because you stay in the memory allocated for your processes. The problem is you can't know for sure that you are not writing on critical parts of your software memory. This kind off error are called buffer overflow and are causing most of the "mystical bugs".
The best way to avoid them is to use valgrind on linux. This soft will tell you if you are writing or reading where you are not supposed to.
It that clear enough ?
I suggest reading this introduction.
Pointers And Memory
It helped me understand the difference between stack and heap allocation, very good introduction.