I am hosting windowsforms control in WPF popup. Problems below:
If i make StaysOpen=False i can't interact with winform control. StaysOpen to false is required because when clicked outsidet the Popup region, it should close.
if i make StaysOpen=True i can interact with winform control but when i click outside the area of popup, it is not getting closed.
I tried setting StaysOpen=true in MouseEnter of popup and StaysOpen=False in MouseLeave, but MouseLeave fires as and when mouse is over winform control resulting in unexpected behaviour.
I even tried IsMouseCaptureWithin property of popup and found it does not work with winforms (i guess its a bug in framework).
Another problem, i was trying to close popup when root main form (which is windows form) is deactivated (pressed Alt+Tab), but this event (deactivate) is fired even when i enter into one of the controls in windowshostControl in popup.
Desired Behaviour:
should be able to host and interact with winform control in wpf popup.
on clicking on outside the area of popup, popup should close.
Appreciate any inputs.
Thanks.
I've had many problems with the defacto-standard popups in WPF, because they are in fact a new window with their own handle. This means if you drag your application around the screen, the popup stays put (it doesn't move with your window). It also means your popup has some strange behaviors and doesn't interact with your application in ways other controls normally do.
I've created 2 decorator classes to address this problem:
PopupDecorator.cs and
TimeoutPopupDecorator.cs
It's pretty simple to use:
Add a namespace declaration for the new popup classes. i.e.
xmlns:dday_wpf="clr-namespace:DDay.WPF"
Surround the area you want the popup to be able to be displayed with the decorator. i.e.
<dday_wpf:PopupDecorator x:Name="popup">
<dday_wpf:PopupDecorator.Popup>
... contents of popup go here ...
</dday_wpf:PopupDecorator.Popup>
... contents of panel go here ...
</dday_wpf:PopupDecorator>
It works pretty much identically to a normal Popup from that moment on.
This may not solve all your problems, but hopefully it helps.
This sounds a bit like my problem launching a modeless winform control from a WPF form.
Check out my question Why is my WPF textbox "kinda" readonly?.
The just being, based on what Doug said about popups being a window with its own handle, makes this applicable.
Related
I'm developing a custom control which has a button that opens a popup.
When that popup contains another instance of my custom control (which also has a button that opens another popup, e.g. a calendar) some problems occur.
The second (nested) popup won't act as suspected. Clicks don't work, won't close, when parent popup is closed.
Are there any specific best practices when using nested popups?
I had the same issue. We have a custom DropDownSubsetSelector control in our wpf controls library. This control has a Popup in its control template with StaysOpen="False". Today I had to put this control on a custom view that is located inside wpf's Popup control with StaysOpen="False" and was wondered of this unexpected nested Popups behaviour. My workaround for this issue was to inspect Microsoft's source code of a classical ComboBox control. You can find it here Combobox Source. As you can see its behaviour on a Popup control is exactly the same you expect from Popup being located on another Popup, and it's template has Popup inside (dropdown for selectable Items).
You must subscribe to events MouseDownEvent and LostMouseCaptureEvent and deal with mouse capturing for proper handling of MouseDownEvent outside of Popup control's area. Inspect and just copy some source code for your nested ExtendedPopup. You can inherit it from classical Popup.
Hi I have a WPF application with various UserControls that contain key functionality. I want to be able to show say a FileManager UserControl in a tab on the main application, or have a dialog pop up when required, that contains the same UserControl.
It seemed like a good idea to create a modal Window and set its Content to the FileManager Usercontrol. But when I am finished with it, I am not sure how to close the containing Window, using a button on the UserControl. Is there an elegant way of doing this without having to store a reference to the Window in the UserControl?
Thanks for any advice!
Create an Event which is called when the respective button on the user control is clicked. That way, the containing control can react to the event in the appropriate manner. For example, a dialog could just close itself.
Is closing a window something that is integral to the functionality of the control in all the contexts where the control is hosted? E.g Does closing a window apply to the case where the control is hosted in a tab of the main app?
If not then you might be better off separating window closing code out of the UserControl in into the window/dialog that is hosting it - using events or whatever to tie the two together.
I have some simple code for popping up a "dialog"-like thing over part of my application window. The idea is, the user must dismiss the dialog before continuing to work with that part of the page.
This works by hovering a large semi-transparent rectangle over the part of the page that is supposed to be disabled - which does a nice enough job of blocking clicks to the region. You see this sort of thing a lot in WPF and Web apps, I think.
The problem I have is, the user can still reach all those juicy blocked controls by tabbing to them using the keyboard. "No problem", I hear you say, "just set the IsEnabled on the panel to false, thereby blocking keyboard access".
Unfortunately, disabling the controls:
Doesn't look very nice
Tends to have unintended consequences with custom styles and bindings further down the tree
So, is there a better way to disable a part of the page, without setting the "IsEnabled" property, such that it doesn't change the visual appearance of any of the controls?
Thanks,
Mark
Can you put your "dialog" XAML in a popup window? Then, call ShowDialog() on the window to make it a modal window? If you don't want your popup to look like a standard window, you could always syle it to remove borders, etc.
I solved this by subscribing to the PreviewGotKeyboardFocus event, from the parent element in the tree, and then handling the event such that focus never gets passed to the children.
Also, I had to explicitly remove focus from the "disabled" controls as well, of course.
I have an ActiveX control inside a WinForms user control. My WinForms app loves it!
Now, moving over to WPF, I use the user control in a WindowsFormsHost control. Works great..., but I want to treat this control as a single element so the user can neatly hit TAB over the existing WPF controls AND this user control NOT to 'go inside' it. i.e. just treat it as a single control like all the others.
I think what i need is the ability to trap the keys, and in the event handler simply move focus to the next control in the sequence, but I can't seem to trap any keyboard input. Ive tried the WPF PreviewKey.. events and the like, but once the tabbing gets to the control, it seems to stay inside it and WPF events are ignored.
I couldnt find anything on this in many WPF books and the net. Can anyone suggest a way ?
Thanks,
Jack.
Can't you create some sort of a filter by doing a preview mouse down on the panel or window (whatever is the parent of your controls), this way the panel will catch it before the user control and you should set e.handled to true, and if the user control raised the tab event, keep pushing the focus until you get another control. Preview and e.Handled=ture should solve the problem.
From what I understand, the popup exists within it's own visual tree. However, I've noticed a few properties, Clip and ClipToBounds. What I am wanting to do is Visually clip a popup at the right and bottom edges of a window regardless of the fact that the popup is independent of the bounds of the window. I'm not using XAML, but if somebody knows how to do it in XAML, then that's fine. I can get to the main window using System.Windows.Application.Current.MainWindow. Is it possible from this to get a value that I can use to clip the popup? I'm assuming that if there is a value that I can use, then I would be able to bind the clipping of the popup to that value. This is really not necessary since after the popup initially opens, if the window gets moved or resized, the popup closes. So I would really only need to clip the popup when it opens. The reason I would like to do this is because although I am using a popup, I don't want it to appear as a popup that exists outside of the window. FYI this is for a popup calendar for a custom datebox. Any ideas, as well as clarification of misconceptions that I may have, would be greatly appreciated.
Furthermore, the popup can be launched from a user control that is not directly on the Main Window. So in that case it would be easier to use a popup. As apposed to a UC inside the XAML
I know this is a year old post, but in case any others come here looking for answers... If you don't need the popup to be outside of your window, why use a popup at all? It'd be far easier to simply use a control in a canvas (for instance) and control it via its Visibility property. Then you'd automagically get your clipping.