Related
I have a table with several indexes. All of them contain an specific integer column.
I'm moving to mysql 5.1 and about to partition the table by this column.
Do I still have to keep this column as key in my indexes or I can remove it since partitioning will take care of searching only in the relevant keys data efficiently without need to specify it as key?
Partition field must be part of index so the answer is that I kave to keep the partitioning column in my index.
Partitioning will only slice the values/ranges of that index into separate partitions according to how you set it up. You'd still want to have indexes on that column so the index can be used after partition pruning has been done.
Keep in mind there's a big impact on how many partitions you can have, if you have an integer column with only 4 distinct values in it, you might create 4 partitions, and an index would likely not benefit you much depending on your queries.
If you got 10000 distinct values in your integer column, you hit system limits if you try to create 10k partitions - you'll have to partition on large ranges (e.g. 0-1000,1001-2000, etc.) in such a case you'll benefit from an index (again depending on how you query the tables)
Typically, the databases are designed as below to allow multiple types for an entity.
Entity Name
Type
Additional info
Entity name can be something like account number and type could be like savings,current etc in a bank database for example.
Mostly, type will be some kind of string. There could be additional information associated with an entity type.
Normally queries will be posed like this.
Find account numbers of this particular type?
Find account numbers of type X, having balance greater than 1 million?
To answer these queries, query analyzer will scan the index if the index is associated with a particular column. Otherwise, it will do a full scan of all the rows.
I am thinking about the below optimization.
Why not we store the hash or integral value of each column data in the actual table such that the ordering property is maintained, so that it will be easy for comparison.
It has below advantages.
1. Table size will be lot less because we will be storing small size values for each column data.
2. We can construct a clustered B+ tree index on the hash values for each column to retrieve the corresponding rows matching or greater or smaller than some value.
3. The corresponding values can be easily retrieved by having B+ tree index in the main memory and retrieving the corresponding values.
4. Infrequent values will never need to retrieved.
I am still having more optimizations in my mind. I will post those based on the feedback to this question.
I am not sure if this is already implemented in database, this is just a thought.
Thank you for reading this.
-- Bala
Update:
I am not trying to emulate what the database does. Normally indexes are created by the database administrator. I am trying to propose a physical schema by having indexes on all the fields in the database, so that database table size is reduced and its easy to answer few queries.
Updates:(Joe's answer)
How does adding indexes to every field reduce the size of the database? You still have to store all of the true values in addition to the hash; we don't just want to query for existence but want to return the actual data.
In a typical table, all the physical data will be stored. But now by generating a hash value on each column data, I am only storing the hash value in the actual table. I agree that its not reducing the size of the database, but its reducing the size of the table. It will be useful when you don't need to return all the column values.
Most RDBMSes answer most queries efficiently now (especially with key indices in place). I'm having a hard time formulating scenarios where your database would be more efficient and save space.
There can be only one clustered index on a table and all other indexes have to unclustered indexes. With my approach I will be having clustered index on all the values of the database. It will improve query performance.
Putting indexes within the physical data -- that doesn't really make sense. The key to indexes' performance is that each index is stored in sorted order. How do you propose doing that across any possible field if they are only stored once in their physical layout? Ultimately, the actual rows have to be sorted by something (in SQL Server, for example, this is the clustered index)?
The basic idea is that instead of creating a separate table for each column for efficient access, we are doing it at the physical level.
Now the table will look like this.
Row1 - OrderedHash(Column1),OrderedHash(Column2),OrderedHash(Column3)
Google for "hash index". For example, in SQL Server such an index is created and queried using the CHECKSUM function.
This is mainly useful when you need to index a column which contains long values, e.g. varchars which are on average more than 100 characters or something like that.
How does adding indexes to every field reduce the size of the database? You still have to store all of the true values in addition to the hash; we don't just want to query for existence but want to return the actual data.
Most RDBMSes answer most queries efficiently now (especially with key indices in place). I'm having a hard time formulating scenarios where your database would be more efficient and save space.
Putting indexes within the physical data -- that doesn't really make sense. The key to indexes' performance is that each index is stored in sorted order. How do you propose doing that across any possible field if they are only stored once in their physical layout? Ultimately, the actual rows have to be sorted by something (in SQL Server, for example, this is the clustered index)?
I don't think your approach is very helpful.
Hash values only help for equality/inequality comparisons, but not less than/greater than comparisons, compared to pretty much every database index.
Even with (in)equality hash functions do not offer 100% guarantee of having given you the right answer, as hash collisions can happen, so you will still have to fetch and compare the original value - boom, you just lost what you wanted to save.
You can have the rows in a table ordered only one way at a time. So if you have an application where you have to order rows differently in different queries (e.g. query A needs a list of customers ordered by their name, query B needs a list of customers ordered by their sales volume), one of those queries will have to access the table out-of-order.
If you don't want the database to have to work around colums you do not use in a query, then use indexes with extra data columns - if your query is ordered according to that index, and your query only uses columns that are in the index (coulmns the index is based on plus columns you have explicitly added into the index), the DBMS will not read the original table.
Etc.
Is it a good idea to index varchar columns only used in LIKE opertations? From what I can read from query analytics I get from the following query:
SELECT * FROM ClientUsers WHERE Email LIKE '%niels#bosmainter%'
I get an "Estimated subtree cost" of 0.38 without any index and 0.14 with an index. Is this a good metric to use for anlayzing if a query has been optimized with an index?
Given the data 'abcdefg'
WHERE Column1 LIKE '%cde%' --can't use an index
WHERE Column1 LIKE 'abc%' --can use an index
WHERE Column1 Like '%defg' --can't use an index, but see note below
Note: If you have important queries that require '%defg', you could use a persistent computed column where you REVERSE() the column and then index it. Your can then query on:
WHERE Column1Reverse Like REVERSE('defg')+'%' --can use the persistent computed column's index
In my experience the first %-sign will make any index useless, but one at the end will use the index.
To answer the metrics part of your question: The type of index/table scan/seek being performed is a good indicator for knowing if an index is being (properly) used. It's usually shown topmost in the query plan analyzer.
The following scan/seek types are sorted from worst (top) to best (bottom):
Table Scan
Clustered Index Scan
Index Scan
Clustered Index Seek
Index Seek
As a rule of thumb, you would normally try to get seeks over scans whenever possible. As always, there are exceptions depending on table size, queried columns, etc. I recommend doing a search on StackOverflow for "scan seek index", and you'll get a lot of good information about this subject.
Good day,
In SQL Server 2005, I have a table numerous columns, including a few boolean (bit) columns. For example,
table 'Person' has columns ID and columns HasItem1, HasItem2, HasItem3, HasItem4. This table is kinda large, so I would like to create indexes to get faster search results.
I know that is not I good idea to create an index on a bit column, so I thought about using a index with all of the bit columms. However, the thing is, all of these bit columns may or may not be in the query. Since the order of the indexed columns are important in an index, and that I don't know which ones will be used in the query, how should I handle this?
BTW, there is already clustered index that I can't remove.
I would suggest that this is probably not a good idea. Trying to index fields with very low cardinality will generally not make queries faster and you have the overhead of maintaining the index as well.
If you generally search for one of your bit fields with another field then a composite index on the two fields would probably benefit you.
If you were to create a composite index on the bit fields then this would help but only if the composite fields at the beginning of the index were provided. If you do not include the 1st value within the composite index then the index will probably not be used at all.
If, as an example bita was used in 90% of your queries and bitd in 70% and bits b and c in 20% then a composite index on (bita, bitd, bitb, bitc) would probably yield some benefit but for at least 10% of your queries and possibly even 40% the index would most likely not be used.
The best advice is probably to try it with the same data volumes and data cardinality and see what the Execution plan says.
I don't know a lot of specifics on sql server, but in general indexing a column that has non-unique data is not very effective. In some RDBMS systems, the optimizer will ignore indexes that are less than a certain percent unique anyway, so the index may as well not even exist.
Using a composite, or multi-column index can help, but only in particular cases where the filter constraints are in the same order that the index was built in. If you index includes 'field1, field2' and you are searching for 'field2, field1' or some other combination, the index may not be used. You could add an index for each of the particular search cases that you want to optimize, that is really all I can think of that you could do. And in the case that your data is not very unique, even after considering all of the bit fields, the index may be ignored anyway.
For example, if you have 3 bit fields, you are only segmenting your data into 8 distinct groups. If you have a reasonable number of rows in the table, segmenting it by 8 isn't going to be very effective.
Odds are it will be easier for SQL to query the large table with the person_id and item_id and BitValue then it will be to search a single table with Item1, Item2, ... ItemN.
I don't know about 2005 but in SQL Server 2000 (From Books Online):
"Columns of type bit cannot have indexes on them."
How about using checksum?
Add a int field named mysum to your table and execute this
UPDATE checksumtest SET mysum = CHECKSUM(hasitem1,hasitem2,hasitem3,hasitem4)
Now you have a value that represents the combination of bits.
Do the same checksum calc in your search query and match on mysum.
This may speed things up.
You should revisit the design of your database. Instead of having a table with fields HasItem1 to HasItem#, you should create a bridge entity, and a master Items table if you don't have one. The bridge entity (table), person_items, would have (a minimum of) two fields: person_id and item_id.
Designing the database this way doesn't lock you in to a database that only handles N number of items based on column definitions. You can add as many items as you want to a master Items table, and associate as many of them as you need with as many people as you need.
As a follow up to "What are indexes and how can I use them to optimise queries in my database?" where I am attempting to learn about indexes, what columns are good index candidates? Specifically for an MS SQL database?
After some googling, everything I have read suggests that columns that are generally increasing and unique make a good index (things like MySQL's auto_increment), I understand this, but I am using MS SQL and I am using GUIDs for primary keys, so it seems that indexes would not benefit GUID columns...
Indexes can play an important role in query optimization and searching the results speedily from tables. The most important step is to select which columns are to be indexed. There are two major places where we can consider indexing: columns referenced in the WHERE clause and columns used in JOIN clauses. In short, such columns should be indexed against which you are required to search particular records. Suppose, we have a table named buyers where the SELECT query uses indexes like below:
SELECT
buyer_id /* no need to index */
FROM buyers
WHERE first_name='Tariq' /* consider indexing */
AND last_name='Iqbal' /* consider indexing */
Since "buyer_id" is referenced in the SELECT portion, MySQL will not use it to limit the chosen rows. Hence, there is no great need to index it. The below is another example little different from the above one:
SELECT
buyers.buyer_id, /* no need to index */
country.name /* no need to index */
FROM buyers LEFT JOIN country
ON buyers.country_id=country.country_id /* consider indexing */
WHERE
first_name='Tariq' /* consider indexing */
AND
last_name='Iqbal' /* consider indexing */
According to the above queries first_name, last_name columns can be indexed as they are located in the WHERE clause. Also an additional field, country_id from country table, can be considered for indexing because it is in a JOIN clause. So indexing can be considered on every field in the WHERE clause or a JOIN clause.
The following list also offers a few tips that you should always keep in mind when intend to create indexes into your tables:
Only index those columns that are required in WHERE and ORDER BY clauses. Indexing columns in abundance will result in some disadvantages.
Try to take benefit of "index prefix" or "multi-columns index" feature of MySQL. If you create an index such as INDEX(first_name, last_name), don’t create INDEX(first_name). However, "index prefix" or "multi-columns index" is not recommended in all search cases.
Use the NOT NULL attribute for those columns in which you consider the indexing, so that NULL values will never be stored.
Use the --log-long-format option to log queries that aren’t using indexes. In this way, you can examine this log file and adjust your queries accordingly.
The EXPLAIN statement helps you to reveal that how MySQL will execute a query. It shows how and in what order tables are joined. This can be much useful for determining how to write optimized queries, and whether the columns are needed to be indexed.
Update (23 Feb'15):
Any index (good/bad) increases insert and update time.
Depending on your indexes (number of indexes and type), result is searched. If your search time is gonna increase because of index then that's bad index.
Likely in any book, "Index Page" could have chapter start page, topic page number starts, also sub topic page starts. Some clarification in Index page helps but more detailed index might confuse you or scare you. Indexes are also having memory.
Index selection should be wise. Keep in mind not all columns would require index.
Some folks answered a similar question here: How do you know what a good index is?
Basically, it really depends on how you will be querying your data. You want an index that quickly identifies a small subset of your dataset that is relevant to a query. If you never query by datestamp, you don't need an index on it, even if it's mostly unique. If all you do is get events that happened in a certain date range, you definitely want one. In most cases, an index on gender is pointless -- but if all you do is get stats about all males, and separately, about all females, it might be worth your while to create one. Figure out what your query patterns will be, and access to which parameter narrows the search space the most, and that's your best index.
Also consider the kind of index you make -- B-trees are good for most things and allow range queries, but hash indexes get you straight to the point (but don't allow ranges). Other types of indexes have other pros and cons.
Good luck!
It all depends on what queries you expect to ask about the tables. If you ask for all rows with a certain value for column X, you will have to do a full table scan if an index can't be used.
Indexes will be useful if:
The column or columns have a high degree of uniqueness
You frequently need to look for a certain value or range of values for
the column.
They will not be useful if:
You are selecting a large % (>10-20%) of the rows in the table
The additional space usage is an issue
You want to maximize insert performance. Every index on a table reduces insert and update performance because they must be updated each time the data changes.
Primary key columns are typically great for indexing because they are unique and are often used to lookup rows.
Any column that is going to be regularly used to extract data from the table should be indexed.
This includes:
foreign keys -
select * from tblOrder where status_id=:v_outstanding
descriptive fields -
select * from tblCust where Surname like "O'Brian%"
The columns do not need to be unique. In fact you can get really good performance from a binary index when searching for exceptions.
select * from tblOrder where paidYN='N'
In general (I don't use mssql so can't comment specifically), primary keys make good indexes. They are unique and must have a value specified. (Also, primary keys make such good indexes that they normally have an index created automatically.)
An index is effectively a copy of the column which has been sorted to allow binary search (which is much faster than linear search). Database systems may use various tricks to speed up search even more, particularly if the data is more complex than a simple number.
My suggestion would be to not use any indexes initially and profile your queries. If a particular query (such as searching for people by surname, for example) is run very often, try creating an index over the relevate attributes and profile again. If there is a noticeable speed-up on queries and a negligible slow-down on insertions and updates, keep the index.
(Apologies if I'm repeating stuff mentioned in your other question, I hadn't come across it previously.)
It really depends on your queries. For example, if you almost only write to a table then it is best not to have any indexes, they just slow down the writes and never get used. Any column you are using to join with another table is a good candidate for an index.
Also, read about the Missing Indexes feature. It monitors the actual queries being used against your database and can tell you what indexes would have improved the performace.
Your primary key should always be an index. (I'd be surprised if it weren't automatically indexed by MS SQL, in fact.) You should also index columns you SELECT or ORDER by frequently; their purpose is both quick lookup of a single value and faster sorting.
The only real danger in indexing too many columns is slowing down changes to rows in large tables, as the indexes all need updating too. If you're really not sure what to index, just time your slowest queries, look at what columns are being used most often, and index them. Then see how much faster they are.
Numeric data types which are ordered in ascending or descending order are good indexes for multiple reasons. First, numbers are generally faster to evaluate than strings (varchar, char, nvarchar, etc). Second, if your values aren't ordered, rows and/or pages may need to be shuffled about to update your index. That's additional overhead.
If you're using SQL Server 2005 and set on using uniqueidentifiers (guids), and do NOT need them to be of a random nature, check out the sequential uniqueidentifier type.
Lastly, if you're talking about clustered indexes, you're talking about the sort of the physical data. If you have a string as your clustered index, that could get ugly.
A GUID column is not the best candidate for indexing. Indexes are best suited to columns with a data type that can be given some meaningful order, ie sorted (integer, date etc).
It does not matter if the data in a column is generally increasing. If you create an index on the column, the index will create it's own data structure that will simply reference the actual items in your table without concern for stored order (a non-clustered index). Then for example a binary search can be performed over your index data structure to provide fast retrieval.
It is also possible to create a "clustered index" that will physically reorder your data. However you can only have one of these per table, whereas you can have multiple non-clustered indexes.
The ol' rule of thumb was columns that are used a lot in WHERE, ORDER BY, and GROUP BY clauses, or any that seemed to be used in joins frequently. Keep in mind I'm referring to indexes, NOT Primary Key
Not to give a 'vanilla-ish' answer, but it truly depends on how you are accessing the data
It should be even faster if you are using a GUID.
Suppose you have the records
100
200
3000
....
If you have an index(binary search, you can find the physical location of the record you are looking for in O( lg n) time, instead of searching sequentially O(n) time. This is because you dont know what records you have in you table.
Best index depends on the contents of the table and what you are trying to accomplish.
Taken an example A member database with a Primary Key of the Members Social Security Numnber. We choose the S.S. because the application priamry referes to the individual in this way but you also want to create a search function that will utilize the members first and last name. I would then suggest creating a index over those two fields.
You should first find out what data you will be querying and then make the determination of which data you need indexed.