website needs to go live which i have placed on client server.i have gven all permissions for IIS.in web.config file i have also given SQL connection string as :
<appSettings>
<add key="ConnectionString" value="Data Source=USER\SQLEXPRESS;Initial Catalog=people_metrix;User ID=MyUser;Password=abc123"/> </appSettings>
In sql server 2005 have allowed remote connections(TCP/IP and named pipes).
but am not able to login to webasite.Username and password exist in database.
In server,firewall is on and there is no IP address(Obtains IP adress automatically).Is Login not happening due to these reasons ?
Please don't EVER use 'sa' in a connection string. EVER!
First try connecting using SQL Server Management studio with your connection string credentials (and not sa!).
Does the firewall on SQl sServer machine allow traffic on port 1433?
To allow connections to SQL Server by TCP port, perform the following steps.
Click Start | Control Panel | Network Connections
Right click on the network adapter that services inbound connections to SQL Server and select Properties
Select Advanced | Windows Firewall | Settings
Select Exceptions | Add Port
Under Name put "SQL Server" and under Port Number select 1433. Use TCP as the protocol.
Click OK to close out all dialogs.
If you're using anything other than standard TCP/IP to access SQL Server, you'll need to enable different ports. To allow RPC over Named Pipes instead of TCP, open port 445 in the same way that I described above.
See this MS support article for configuring remote connections: How to configure SQL Server 2005 to allow remote connections
You might check out connectionstrings.com
It has several connection string examples.
Related
I am using Microsoft SQL Server Management Studio 17 to connect to a remote Microsoft SQL Server database. Looking at the connection dialog of Studio 17, I don't see any port number setting. Google tells me that Studio uses port 1433 by default.
I tried to use telnet to check if port 1433 is listening on the remote server: telnet example.company.com 1433
However, the connection failed. How can I find the port used for this database connection?
You could connect SSMS to your DB, run ProcessExplorer and examine the properties of ssms.exe. On the "TCP/IP" tab you possibly find what you are asking for:
Make sure you have connectivity to the server first. Since you mentioned "remote" there could be a firewall in the way, so your solution is going to depend on your network topology.
Can you ping the server? If ping works, I would reach out to the owner of the server and verify the DB connection parameters. Maybe your IP needs to be whitelisted. Etc. Etc.
Check if the server host has inbound port 1433 enabled, and whether TCP/IP is enabled using the SQL server configuration manager. If the SQL server instance in question sits on the cloud, you might want to check the specific provider's firewall rules on the container and adjust to permit 1433 inbound connections. The port setting entirely lies on where the actual SQL server instance sits. The management studio in your remote client will not be using any port.
I forwarded port 1433 to 9082 on my server, at firewall set to allow for inbound and outbound, at SQL Server Allow Remote is ON.
But, I can't connect to my SQL Server from client.
I installed SQL Server 2012.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
Solution to problems connecting to MS SQL server with Microsoft SQL Server Management Studio if your port is forwarded
I had problem with this as well. It's been bugging me for days now. Finally I stumbled on solution on this page so I'll exclude it as screenshot:
It's not : like in all other systems, you have to put ,
First off check in the ERRORLOG the port used by SQL Server (there is no guarantee it will always listen on 1433, or if TCP is enabled at all).
In the ERRORLOG, at startup, you will find a line like this one:
In my case the port is indeed 1433 but yours may be different. If needed, you can change it using the SQL Server Configuration Manager.
Secondly, if you are forwarding a port to a different one (like your example from 1433 to 9082) you are in fact disabling the SQL Server Browser. This happens because SQL Server Browser does not know of your port forward so it will tell the clients to connect to 1433 (supposing you are allowing UDP 1434 otherwise you won't be able to reach SQL Server Browser at all).
You can connect to a SQL Instance without using the SQL Server Browser though, all you need is to specify the port in the connection string (without the instance name, if any).
For example, if your instance is called MYSERVER/INST your connection string will be something like:
User ID=*****;Password=*****;server=tcp:MYSERVER,9082
Also make sure to configure your SPNs manually otherwise Kerberos won't work.
You can find more details on how to compose the right connection string here: SqlConnection.ConnectionString Property.
try config your router first. after all connect. Btw, already enable TCP/IP #sql yet or not?make sure open port for sql.
check on sql configuration enable or not for open connection
check firewall open or not
check router open or not
check connection lag or not(if network). local no need
make sure sql browser and agent run(for xp if not xp just enable sql browser)
if not all there maybe you wrong installation. if for network work install local/system. not network(this for attach #server cluster)
I have opened up port 1433 on my firewall, but every time I try and connect to my remote SQL Database with SQL Server Management Console I receive (Microsoft SQL Server, Error: 53)
https://social.technet.microsoft.com/wiki/contents/articles/2102.how-to-troubleshoot-connecting-to-the-sql-server-database-engine.aspx
http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx
Enable remote connections for SQL Server Express 2012
Short Answer
Check Firewall
Check Service is Running
Check TCP/IP is Enabled
Check SQL Server Properties "Allow Remote Connections"
Check if the SQL Server is on a restricted subnet
Then Run these if Those Do not Resolve
Right-click on TCP/IP and select Properties.
Verify that, under IP2, the IP Address is set to the computer's IP address on the local subnet.
Scroll down to IPAll.
Make sure that TCP Dynamic Ports is blank.
Make sure that TCP Port is set to 1433.
If you have a named instance then you must have the SQL Server Browser Service enabled
The browser service runs on port UDP 1434 and this must be allowed through your firewall
Hail Mary Pass if this is Still not Resolved
Go to the client machine, and run cliconfg.exe If named pipes is listed first, demote it, and promote TCP/IP.
check if the firewall is blocking the named pipes port, which usually is 445
What you need to do is go into SQL Server Configuration Manager where SQL Server is installed.
In the Start Menu, under the Microsoft SQL Server folder, open the Configuration Tools folder and select SQL Server Configuration Manager.
In the Config Manager, click the arrow next to SQL Server Network Configuration, then click on "Protocols for {Instance}". {Instance} will be your install, if it's the default instance it will be MSSQLSERVER.
On the right side, make sure that TCP/IP is "Enabled". Double click TCP/IP, in the window that opens, change the drop down to "Yes".
Here is the how to fix it and gain your connectivity back:
Click WindowsKey + R and enter services.msc
Once Services opens scroll down and locate service SQL Server
Highlight the service and click START
Wait for the service to start and retry to connect to your MSSQL instance
It should now work again and you will be able to connect to your MSSQL instance and run queries.
I have solved this problem. Please refer to this thread: http://social.technet.microsoft.com/Forums/forefront/en-US/d2624655-e6ff-4947-b1a8-a2edcffd8a21/denied-connection-netbios-session-protocol#68321990-4ac4-46fa-b7f8-9e0ded3234bb
In detail: I was receiving the following error from ISA when trying to connect from my SBS 2003 Server to my offsite MSSQL Database Provider via SQL Server Management Studio:
Denied Connection
Log type: Firewall service
Status: A packet generated on the local host was rejected because its source IP address is assigned to one network adapter and its destination IP address is reachable through another network adapter.
Rule:
Source: Local Host ( 192.168.1.1:29859)
Destination: External (...:139)
Protocol: NetBios Session
I have figured this out. I had to add "Local Host" as one of the sources for the ISA Rule that I had initially created to allow SQL Server Management Console connections in the first place. That rule was allowing "Internal" sources but not the Local Host (127.0.01), which is needed for this scenario.
in SSMS while opening give the server name as your_Hostname\your_sqlservername (give both the names as applicable instead of local or just only servername) it works fine.
I could ping my Virtual Machine SQL server but couldn't connect to it.
I disabled my wired and wireless NICs and then it connected !
Initial Attempt
I have an Azure VM with Windows Server 2012, on which I just installed SQL Server 2012 Express Database Engine component. Then, I followed the instructions here to connect remotely with SQL Server Management Studio.
Create a TCP endpoint for the virtual machine
Open TCP ports in the Windows firewall
Configure SQL Server to listen on the TCP protocol
Configure SQL Server for mixed mode authentication
Create SQL Server authentication logins
Determine the DNS name of the virtual machine
Connect to the Database Engine from another computer
After step seven I received the following error:
A network related or instance-specific error occurred while
establishing a connection to SQL Server. The server was not found or
was not accessible. Verify that the instance name is correct and that
SQL Server is configured to allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
(Microsoft SQL Server, Error: 53)
What else do I need to configure before connecting remotely?
Troubleshooting
I have been following the troubleshooting instructions here. Each blockquote below is a step described that that link.
Confirm the instance of the SQL Server Database Engine is installed
and running.
Done. We installed SQL Server Express, and it is running as a named instance called SQLEXPRESS.
If you are attempting to connect to a named instance, make sure the
SQL Server Browser service is running.
Done. We followed the steps here to turn on the SQL Server Browser service.
Get the IP Address of the computer.
Done. We will use these later for testing connectivity and maybe for setting up a static port for SQLEXPRESS.
10.241.62.155
fe80::45c:8c29:e19f:f78b%15
Get the TCP port number used by SQL Server.
Done. The SQL Server Management Studio server logs showed that the server was listening on port 49169.
Enable Protocols
Done. We had already enabled TCP/IP in the configuration manager, but we restarted the SQL Server Service just in case.
Testing TCP/IP Connectivity
Done. We used tcping.exe to test connectivity (cmd ping doesn't work quickly with Azure.) We were able to connect to port 80.
tcping.exe buddha.cloudapp.net > successful
tcping.exe buddha.cloudapp.net 80 > successful
Testing a Local Connection
Done. We used sqlcmd.exe from the command prompt and were able to connect locally via TCP with a username and password.
sqlcmd -S Buddha\SQLEXPRESS (success via shared memory protocol)
sqlcmd -S tcp:Buddha\SQLEXPRESS (success via TCP)
sqlcmd -S tcp:Buddha\SQLEXPRESS -U sa -P (success via TCP with username)
sqlcmd -S tcp:10.241.62.155\SQLEXPRESS -U sa -P (success with internal IP)
Opening a Port in the Firewall
We opened the port on which we SQLEXPRESS listens. The server logs (above) showed that SQLEXPRESS was listening on port 49169, but this is just one of many dynamic ports, and we wanted to set up the static port 1435.
Use WF.msc to create an inbound TCP rule for port 1435.
Use Azure Management Portal to create a TCP endpoint for port 1435.
The troubleshooting instructions also say:
If you are connecting to a named instance or a port other than TCP
port 1433, you must also open the UDP port 1434 for the SQL Server
Browser service.
Since we are connecting SQLEXPRESS (a named instance), we needed to open port 1434 for UDP.
Use WF.msc to create an inbound UCP rule for port 1434.
Use Azure Management Portal to create a UDP endpoint for port 1434
Further research about connecting to named instances revealed dynamic port issues. The reason why we are using port 1435 (static) instead of port 49169 (one of many effective options.)
Instances of SQL Server Express, SQL Server Compact, and named
instances of the Database Engine use dynamic ports. To configure these
instances to use a specific port, see Configure a Server to Listen on
a Specific TCP Port (SQL Server Configuration Manager). and
here.
Done. We went to SQL Configuration Manager > SQL Server Network Configuration > Protocols for SQLEXPRESS > TCP/IP, we did the following.
Protocol Tab > Listen All > NO.
IP Addresses Tab > for each listed address
Enabled > Yes
TCP Dynamic Ports > Blank (delete the zero)
TCP Port > 1435 (or your choice)
After restarting the SQLEXPRESS service, we again looked in the SQL Server Management Studio logs, and found that the Server is Listening on port 1435!!! Hooray!
Testing the Connection
Done. We opened SQL Server Management Studio on our local (non-Azure) computer and connected.
buddha.cloudapp.net,1435 OR buddha.cloudapp.net\SQLEXPRESS
sa
password
Success.
Here are the three web pages on which we found the answer. The most difficult part was setting up static ports for SQLEXPRESS.
Provisioning a SQL Server Virtual Machine on Windows Azure. These initial instructions provided 25% of the answer.
How to Troubleshoot Connecting to the SQL Server Database Engine. Reading this carefully provided another 50% of the answer.
How to configure SQL server to listen on different ports on different IP addresses?. This enabled setting up static ports for named instances (eg SQLEXPRESS.) It took us the final 25% of the way to the answer.
The fact that you're getting an error from the Names Pipes Provider tells us that you're not using the TCP/IP protocol when you're trying to establish the connection. Try adding the "tcp" prefix and specifying the port number:
tcp:name.cloudapp.net,1433
I too struggled with something similar. My guess is your actual problem is connecting to a SQL Express instance running on a different machine. The steps to do this can be summarized as follows:
Ensure SQL Express is configured for SQL Authentication as well as Windows Authentication (the default). You do this via SQL Server Management Studio (SSMS) Server Properties/Security
In SSMS create a new login called "sqlUser", say, with a suitable password, "sql", say. Ensure this new login is set for SQL Authentication, not Windows Authentication. SSMS Server Security/Logins/Properties/General. Also ensure "Enforce password policy" is unchecked
Under Properties/Server Roles ensure this new user has the "sysadmin" role
In SQL Server Configuration Manager SSCM (search for SQLServerManagerxx.msc file in Windows\SysWOW64 if you can't find SSCM) under SQL Server Network Configuration/Protocols for SQLExpress make sure TCP/IP is enabled. You can disable Named Pipes if you want
Right-click protocol TCP/IP and on the IPAddresses tab, ensure every one of the IP addresses is set to Enabled Yes, and TCP Port 1433 (this is the default port for SQL Server)
In Windows Firewall (WF.msc) create two new Inbound Rules - one for SQL Server and another for SQL Browser Service. For SQL Server you need to open TCP Port 1433 (if you are using the default port for SQL Server) and very importantly for the SQL Browser Service you need to open UDP Port 1434. Name these two rules suitably in your firewall
Stop and restart the SQL Server Service using either SSCM or the Services.msc snap-in
In the Services.msc snap-in make sure SQL Browser Service Startup Type is Automatic and then start this service
At this point you should be able to connect remotely, using SQL Authentication, user "sqlUser" password "sql" to the SQL Express instance configured as above. A final tip and easy way to check this out is to create an empty text file with the .UDL extension, say "Test.UDL" on your desktop. Double-clicking to edit this file invokes the Microsoft Data Link Properties dialog with which you can quickly test your remote SQL connection
I am using MS Server 2008 with MSSQL 2008-R2 as database server.
Each time for some work i have to login to server via Remote connection.I tried to configure
the SQL Server remote connection on, followed the following steps....
1.Created Inbound and outbound rules for tcp port 1433.
2.In sqlserver configuration manager ,all is set for IP address and POrt no properties.
3.Set the SqlServer instance for remote connections.
But still its not working.
Also when i checked port 1433 for tcp on local computer it is shown closed.
thanks in advance.......
Probably port 1433 is disabled, so enable it using MS WIndows firewall.
or just use
netsh firewall set portopening protocol = TCP port = 1433 name = SQLPort mode = ENABLE scope = SUBNET profile = CURRENT
Probably MS SQL Server Browser Service is not running. So go to Services and start it.
or just execute under Run menu
%windir%\system32\services.msc
Probably TCP/IP channel is disabled under SQL Server 2008/2014 Configuration Manager. SO go there and enable all TCP/IP options.
Just in case at the same place (SQL Server 2008/2014 Configuration Manager) make sure you have 1433 port.
Make sure that SQL server is configured to allow remote connections. Use MS SQL Management Studio and right click on the top node which server itself.
In the SQL Server Configuration Manager->SQL Server Network Configuration->Protocols, check that named pipes and tcp/ip are enabled.
If that doesn't work then it may be your firewall blocking it, try this link: http://msdn.microsoft.com/en-us/library/cc646023.aspx
This may be useful too:
http://support.microsoft.com/kb/287932
If named pipes and TCP/IP access are already enabled in SQL Server Configuration Manager, then you need to either add a rule for UDP port 1434, or a rule for sqlbrowser.exe so that the SSMS client can talk to the SQL Server Browser service.
I actually see people having this problem surprisingly often so I wrote up an explanation here: http://blog.dereenigne.com/microsoft-sql-server-dynamic-ports-windows-firewall-and-you/
If you're trying to connect to an SQL Server Express instance as is my case right now... it doesn't use port 1433 by default. One must check the IpAll => TCP Dynamic Ports in Sql Server Configuration Manager. Mine is 52848.
After entering the correct port 52848 in DbSchema app (the one I'm trying to use), it connected successfully.
Check the following screenshot:
This is the way to go:
The default SQL Server express installation does not enable TCP
network protocols, so here are some steps to take to be able to
communicate with SQL Server Express. These steps should be similar for
MS SQL Server Express 2017, 2016, 2014, 2012, 2008, and 2005.
Launch the SQL Server Configuration Manager. It should be in the Start -> Programs -> Microsoft SQL Server 2005 -> Configuration Tools start menu option.
Select the SQL Server 2005 Network Configuration tab. There should be a Protocols for SQLExpress option, and one of the protocols should be TCP IP.
Enable the TCP IP protocol if it is not enabled.
The default port for SQL Express may not be 1433. To find the port it is listening on, right-click on the TCP IP protocol and scroll all the way down to the IP All heading. There should be a section called TCP Dynamic Ports. This should list the port SQL Express is listening on. You can then put this value into the port field when adding the connection profile via RazorSQL.
Make sure to restart SQL Express before trying to connect.
Text kindly reproduced from:
https://razorsql.com/docs/support_sqlserver_express.html
I had multiple NICs in my server. When I went to SQL Server Network Configuration -> TCP/IP and right clicked for properties there was a list of the NICs and at the bottom was the open port for my SQLEXPRESS. It was not 1433..... I do not know if there is a default but mine was in the 49,000 s.