Here is a portion of my wpf-xaml code :
<ListBox x:Name="TestJobSuiteListBox" Grid.Row="1" ItemsSource="{Binding AvailableJobs}" MouseRightButtonDown="TestJobSuiteListBox_OnMouseRightButtonDown">
<ListBox.ItemTemplate>
<HierarchicalDataTemplate>
<ListBoxItem Content="{Binding Name}"/>
</HierarchicalDataTemplate>
</ListBox.ItemTemplate>
</ListBox>
I would like to add another listboxitem to that ListBox and I dont want it to be visible before you rightclick on the listbox. It also should not be bound to the "AvailableJobs" property.
Something like this :
<ListBox x:Name="TestJobSuiteListBox" Grid.Row="1" ItemsSource="{Binding AvailableJobs}" MouseRightButtonDown="TestJobSuiteListBox_OnMouseRightButtonDown">
<ListBox.ItemTemplate>
<HierarchicalDataTemplate>
<ListBoxItem Content="{Binding Name}"/>
</HierarchicalDataTemplate>
</ListBox.ItemTemplate>
<ListBoxItem x:Name="AddJobbListBoxItem" Visibility="Hidden"></ListBoxItem>
</ListBox>
This doesn't work, because of "itemsource must be empty problem"
Anyone have a good Idea of how I could do it ?
I don't need help with the visibility/rightclick functionality.
Thanks in advance, I hope the problem is understandable.
You can put listbox to stackPanel, and disable it's scrolling. Then add that one element also to the stackPanel under the listbox, and finally add that stackPanel to scrollViewer. Then you have listbox with AddButton.
<ScrollViewer>
<StackPanel>
<ListBox ItemsSource="{Binding AvailableJobs}"
ScrollViewer.VerticalScrollBarVisibility="Disabled">
<!-- ... -->
</ListBox>
<Button x:Name="AddJobbButton" Visibility="Collapsed" />
</StackPanel>
</ScrollViewer>
Notice that if you have lots of items in listbox, there might be some performance problems, because I'm not sure that listbox's virtualizing is working correctly if it's in stackPanel.
EDIT: of course you have to listen mouse events and set then button's visibility to visible and so on...
I think you have to use ItemTemplateSelector to achieve this functionality. You can create different DataTemplate as per your requirement in the Resources section and bind properly in the xaml. Check the answer here, it will give you the idea about the approach. Please refer this examlpe also. Hope this will help.
I want to make it so that my TabControl is vertically scrollable, but I can't seem to do it. The following sample acts as though there was no scrollviewer at all. I even tried putting the TabControl inside the scrollviewer, or putting it all in a grid and constraining the height of the grid, but nothing works.
<DataTemplate x:Key="tabControlTemplate">
<TabControl ItemsSource="{Binding guiItems}" DisplayMemberPath="Title" Height="Auto" Template="{StaticResource mainTabControlTemplateEx}">
<TabControl.ContentTemplate>
<DataTemplate>
<ScrollViewer Grid.Row="1" VerticalScrollBarVisibility="Auto" CanContentScroll="True">
<StackPanel Margin="2" HorizontalAlignment="Stretch" VerticalAlignment="Stretch">
<ItemsControl ItemsSource="{Binding guiItems }" ItemTemplateSelector="{DynamicResource templateSelector}"/>
</StackPanel>
</ScrollViewer>
</DataTemplate>
</TabControl.ContentTemplate>
</TabControl>
</DataTemplate>
The actual problem is not clear from the question.
You are not getting to see scrollviewer and the content inside is clipped? PLease confirm if that is the case.
If the problem is you are getting to see entire content taking up all the available space, and you would like to control that using scroll viewer, then you would need to set 'MaxHeight' property on Scroll Viewer. This would limit the height of your DataTemplate and would make verticall scroll bar visible if the inner content goes beyond the MaxHeight.
Hope that helps.
I have an ItemsControl in my user control with a scroll viewer around it for when it gets too big (Too big being content is larger than the viewable area of the UserControl). The problem is that the grid that it is all in just keeps expanding so that the scroll viewer never kicks in (unless I specify an exact height for the grid). See code below and thanks in advance.
<UserControl x:Class="BusinessObjectCreationWizard.View.TableSelectionPageView"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
<GroupBox FontWeight="Bold" Height="300px"
Header="Tables"
Padding="2">
<ScrollViewer>
<ItemsControl FontWeight="Normal"
ItemsSource="{Binding Path=AvailableTables}">
<ItemsControl.ItemTemplate>
<DataTemplate>
<CheckBox Content="{Binding Path=DisplayName}"
IsChecked="{Binding Path=IsSelected}"
Margin="2,3.5" />
</DataTemplate>
</ItemsControl.ItemTemplate>
</ItemsControl>
</ScrollViewer>
</GroupBox>
</UserControl>
This user control is loaded here
<Border Background="White" Grid.Column="1" Grid.Row="0">
<HeaderedContentControl Content="{Binding Path=CurrentPage}"
Header="{Binding Path=CurrentPage.DisplayName}" />
</Border>
I would like to not specify the height.
If you remove the Height from your GroupBox (which, as far as I understand, is what you want to do), then it will fill its container, unless there's a panel upstream that imposes its own sizing rules.
I used this simplified version of your XAML. I removed the template and the binding, and hard-coded some items, to make this stand alone; those changes won't affect the way layout is done.
<Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation">
<GroupBox FontWeight="Bold" Header="Tables" Padding="2">
<ScrollViewer>
<ItemsControl FontWeight="Normal">
<TextBlock>Foo</TextBlock>
<TextBlock>Bar</TextBlock>
<TextBlock>Baz</TextBlock>
</ItemsControl>
</ScrollViewer>
</GroupBox>
</Window>
Run it, and you'll see that the content does indeed size to fit the window, and the scrollbar only enables when the window gets too small to see all three items. I believe this is what you want.
So the problem is most likely one of the parent panels, one you're not showing in your sample XAML. The problem you describe could occur if your GroupBox appears inside a StackPanel:
<Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation">
<StackPanel>
<GroupBox FontWeight="Bold" Header="Tables" Padding="2">
<ScrollViewer>
<ItemsControl FontWeight="Normal">
<TextBlock>Foo</TextBlock>
<TextBlock>Bar</TextBlock>
<TextBlock>Baz</TextBlock>
</ItemsControl>
</ScrollViewer>
</GroupBox>
</StackPanel>
</Window>
Now the GroupBox appears at the top of the Window, sized to exactly fit its contents. If you shrink the Window enough, the GroupBox will be cut off -- because it's sized to fit its content, not its container. This sounds like the problem you're describing.
The reason is that StackPanel asks its children what their ideal height is (based on their content), and uses that height. Without StackPanel (or something similar), the default is to respect the control's VerticalAlignment, and if that's set to the default value of Stretch, then the control is stretched to fill its parent. This means it won't be taller than its parent, which sounds like what you want.
Solution: remove the StackPanel (or whatever else is causing you problems) and use something else. Depending on what you're trying to accomplish, you might have better luck with a DockPanel or a Grid. Hard to tell without knowing more about your layout.
Edit: Okay, it looks like the problem is indeed the HeaderedContentControl parent -- but not directly. HeaderedContentControl isn't a panel, so it doesn't do any layout of its own (and its descendant, GroupBox, doesn't have this same problem). The problem is its default template -- which includes a StackPanel. The good news is, you're free to use a different template, let's say one with a DockPanel instead:
<Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
<HeaderedContentControl>
<HeaderedContentControl.Style>
<Style TargetType="{x:Type HeaderedContentControl}">
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type HeaderedContentControl}">
<DockPanel>
<ContentPresenter ContentSource="Header" DockPanel.Dock="Top"/>
<ContentPresenter/>
</DockPanel>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</HeaderedContentControl.Style>
<GroupBox FontWeight="Bold" Header="Tables" Padding="2">
<ScrollViewer>
<ItemsControl FontWeight="Normal">
<TextBlock>Foo</TextBlock>
<TextBlock>Bar</TextBlock>
<TextBlock>Baz</TextBlock>
</ItemsControl>
</ScrollViewer>
</GroupBox>
</HeaderedContentControl>
</Window>
If you leave off the <HeaderedContentControl.Style> part, this reproduces your problem; but with the style in place, it allows the GroupBox to fill its container, so the ScrollViewer will get a scrollbar when you want it to.
If the previous answer doesn't fix the problem, you could also try binding the Width, Height of your grid to the ActualWidth, ActualHeight of your parent UserControl. Something like:
<UserControl
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
x:Class="WpfApplication.UserControl1"
x:Name="UserControl">
<Grid Height="{Binding ElementName=UserControl, Path=ActualHeight}"
Width="{Binding ElementName=UserControl, Path=ActualWidth}" />
In this case you aren't setting an explicit width and height but you are limiting the Grids width/height to the constraints of the UserControl it sits in.
I had the same issue, after reading this response I replaced all StackPanels with Grids in UserControl. It resolved the Scrollbar issue.
Try removing the grid entirely and setting the HorizontalAlignment and VerticalAlignment directly on the GroupBox. If a layoutpanel has only one child, it's often redundant... this migth be true in your case.
If that doesn't work... what's the parent of your grid control?
Why not just use a listbox instead of an itemscontrol, that has a built in scrollviewer.
They are different. If you do not want to have the items selectable, then don't use a ListBox. It is going to be heavier, and will also have the deselect a selection everytime the user clicks on an entry. Just put the ItemsControl in a ScrollViewer
I had the same problema with ListBox, it wasn't expanding and the scroll viewer didn't appear. I solved it as follows:
<UserControl x:Class="TesteView"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
<Grid MaxHeight="710">
....
....
<StackPanel>
<ListBox MaxHeight="515"
ScrollViewer.HorizontalScrollBarVisibility="Hidden"
ScrollViewer.VerticalScrollBarVisibility="Auto"
ItemsSource="{Binding Path=Teste,Mode=TwoWay}">
....
....
</ListBox>
</StackPanel>
</Grid>
</UserControl>
I have a Windows Phone 7 Silverlight application that has a listbox and within the item template it binds another listbox.
<ListBox x:Name="CouponsGrouping">
<ListBox.ItemTemplate>
<DataTemplate>
<StackPanel>
<TextBlock Text="Expires" />
<ListBox ItemsSource="{Binding Coupons}" Margin="0,10,0,0">
<ListBox.ItemTemplate>
<DataTemplate>
<StackPanel>
<HyperlinkButton Content="{Binding StoreName}" HorizontalAlignment="Left"/>
<TextBlock Text="{Binding CouponText}" Style="{StaticResource PhoneTextNormalStyle}" />
<TextBlock Text="{Binding CouponType}" Style="{StaticResource PhoneTextNormalStyle}" />
<Button Content="Press me" />
</StackPanel>
</DataTemplate>
</ListBox.ItemTemplate>
</ListBox>
</StackPanel>
</DataTemplate>
</ListBox.ItemTemplate>
</ListBox>
When I try to scroll (click and drag) the list from within the inner listbox the parent listbox doesn't scroll. If I scroll by clicking on the "Expires" texbox it scrolls fine. How can I make it so that when I scroll the inner listbox the parent listbox scrolls instead.
Thanks, in advance.
On your child listbox add ScrollViewer.VerticalScrollBarVisibility="Disabled". This prevents the undesired scrolling behavior.
Hey Jonas - Kevin from Tampa, actually I was just looking up this same question. I don't think this is really a poor UX based upon usage. What I did to resolve this was to actually use a grid rather than a stack panel for the data template of the outer ListBox. Then after I put the nested ListBox in the outer DataTemplate, I put a Rectangle with a transparent fill. You just need to make sure your Rectangle is tall and wide enough to mask the inner ListBox. My nested ListBox only has 2-3-4 items so it's really not an issue.
Make sense?
I have a ListBox in a grid that gets databound when the page loads... pretty straightforward. The problem I'm having is that, after the box is databound, I can scroll... but not all the way to the bottom of the list. It stops an item or two short and won't let me scroll anymore. Here's the listbox XAML:
<Grid x:Name="ContentGrid" Grid.Row="2">
<ListBox x:Name="lbFeed" ItemsSource="{Binding Items}" SelectionChanged="lbFeed_SelectionChanged" VerticalAlignment="Top" Width="480">
<ListBox.ItemTemplate>
<DataTemplate x:Key="MyDataTemplate">
<StackPanel Orientation="Vertical" Width="430">
<TextBlock Text="Some text" TextAlignment="Center" />
</StackPanel>
</DataTemplate>
</ListBox.ItemTemplate>
</ListBox>
</Grid>
I can post more code, but I'm still getting my feet wet in XAML and I'm not sure what might be causing this. If you need more context, let me know and I'll add it here.
This is a known issue at this stage of ctp release if you happen to have rows that are not fixed height. If this is the case you will likely notice your scrolling is a bit jittery too. Fix the height of your content for now if this is the case for your app and all is resolved.