I have a bunch of *.TBC files from a very old application that runs in MS-DOS called TURBOLAB. Anyone know which DB System use files with a TBC extension.
I've tried renaming the files to *.dbf to check if they are dBase files with no luck.
Any idea?
Judging by the application and era (old MS-DOS) *.tbc is probably a fixed length binary record format written by the application's developers.
Try opening up the file in a text editor like TextPad first and if you can read the contents, if so I have a fixed length text file reader that you can adapt to your needs. If you cannot you may need to determine field lengths and data types through trial and error.
Also, are there associated files for each *.tbc? A paired file could indicate field lengths and data types (or that information could be stored at the top of a *.tbc file itself).
I Googled this: FlexPro. I hope it helps. Sounds pricey, I hope your data is worth it.
Judging by the application and era
(old MS-DOS) *.tbc is probably a fixed
length binary record format written by
the application's developers.
I think you are right. Unfortunately there are no matching file names. If each of those files is a 'table', there are like ~150 tables in this database. Too much work for such an old app. I guess my customer will have to start from scratch using my app.
Thanks anyway for your help.
Related
I have a huge 1.9 GB data file without extension I need to open and get some data from, the problem is this data file is extension-less and I need to know what extension it should be and what software I can open it with to view the data in a table.
here is the picture :
Its only 2 lines file, I already tried csv on excel but it did not work, any help ?
I have never use it but you could try this:
http://mark0.net/soft-tridnet-e.html
explained here:
http://www.labnol.org/software/unknown-file-extensions/20568/
The third "column" of that line looks 99% chance to be from php's print_r function (with newlines imploded to be able to stored on a single line).
There may not be a "format" or program to open it with if its just some app's custom debug/output log.
A quick google found a few programs to split large files into smaller units. THat may make it easier to load into something (may or may not be n++) for reading.
It shouldnt be too hard to mash out a script to read the lines and reconstitute the session "array" into a more readable format (read: vertical, not inline), but it would to be a one-off custom job, since noone other than the holder of your file would have a use for it.
I come to you completely stumped. I do some side work for a company that uses an old DOS based program to input and retrieve data. This is a legacy piece of software, and they have since moved to either QuickBooks or Outlook for all of their address or billing related needs. However there have been some changes made, and they work with this database fairly regularly. Since the computer that this software is on, is running XP (and none of the other computers in the office can run it) they're looking to phase this software out for when the computer inevitably explodes.
TLDR; I have an old .csv file (roughly two years) that has a good chunk of information on it, but again it's two years old. I have another file called ml.dat (I'm assuming masterlist.dat) that's in the same folder as this legacy software. I open it with notepad and excel and am presented with information like this:
S;Û).;PÃS;*p(â'a,µ,
The above chunk of text is recognized much less within notepad or excel. It's a lot more of the unrecognized squares.
Some of the information is actually readable however. I can for example read the occasional town name, or person's name but I'm unable to get all of the information since there's a lot missing. Perhaps the data isn't in unicode or something? I have no idea. Any suggestions? I'm ultimately trying to take this information and toss it into either quickbooks or outlook.
Please help!
Thanks
Edit: I'm guessing the file might be encrypted since .dat's are usually clear text? Any thoughts?
.DAT files can be anything, they are usually just application data. Since there is readable text, then it is very unlikely that this file is encrypted. Instead you are seeing ASCII representations of the bytes of other content. http://www.asciitable.com/ Assuming single byte values, the number 77 might appear in the file somewhere as M.
Your options:
Search for some utility to load and translate the dat file for that application.
Set up an appropriate dos emulator so you can run this application on another box, or even a virtual machine running freedos or something.
Figure out the file format and then write a program to translate the data.
For #3, you can attach a debugger to the application to trace how the file is read and written. Alternatively you can try to figure out record boundaries (if all the records are the same size, then things are a little bit easier.) Then you can use known values to try to find field boundaries. If you can find (or reverse compile) the source code, then that could also give you insight into the file format.
1 is your best bet, and #2 will buy you some time so that you don't need that original machine anymore. #3 would likely be something to outsource.
If you can find the source or file format, then you just recreate whatever data structure was dumped to the file and read the file into it.
To find which exe opens it, you can do something like:
for %f in (*.exe) do find "ml.dat" %f -c
Assuming the original application was written in C then there would be code something like this to read the first record from the file:
struct SecretData
{
int first;
double money;
char city[10];
};
FILE* input;
struct SecretData secretdata;
input = fopen("ml.dat", "rb");
fread(&data, sizeof(data), 1, input);
fclose(input);
(The file would have been written with fwrite.) Basically you need to figure out the innards of the SecretData structure to be able to read the file.
There likely wasn't a separate utility used to make the file, dumping data and reading it back from a file is relatively easy in most languages.
I have a number of files that contain data in a format I am not familiar with. All of the data files begin with the same byte sequence, presumably a file header, and the sequence is "URES". I'm assuming that these files are some kind of resource file, perhaps a collection of data or other files all embedded into one file; that's just a guess however.
Does anyone know what format this is/might be?
If so, how would I interrogate the file? Are there applications that let me open these kind of files? Do you know of any libraries or APIs that I can use to gain programmatic access the data?
Have you tried running the unix file command on it?
I know of one file format that starts with URES. It's a data file used for Watchtower Library. I have yet to understand the format myself.
maybe its something from the Universal Resource Editor (URE) that comes with the OS/2 Toolkit? just a guess...
it is from the watchtower library files and they use meps to encode it which is thier own librarys and encryption software so to crack it would take you a long time.
just had a general question about how to approach a certain problem I'm facing. I'm fairly new to C so bear with me here. Say I have a folder with 1000+ text files, the files are not named in any kind of numbered order, but they are alphabetical. For my problem I have files of stock data, each file is named after the company's respective ticker. I want to write a program that will open each file, read the data find the historical low and compare it to the current price and calculate the percent change, and then print it. Searching and calculating are not a problem, the problem is getting the program to go through and open each file. The only way I can see to attack this is to create a text file containing all of the ticker symbols, having the program read that into an array and then run a loop that first opens the first filename in the array, perform the calculations, print the output, close the file, then loop back around moving to the second element (the next ticker symbol) in the array. This would be fairly simple to set up (I think) but I'd really like to avoid typing out over a thousand file names into a text file. Is there a better way to approach this? Not really asking for code ( unless there is some amazing function in c that will do this for me ;) ), just some advice from more experienced C programmers.
Thanks :)
Edit: This is on Linux, sorry I forgot to metion that!
Under Linux/Unix (BSD, OS X, POSIX, etc.) you can use opendir / readdir to go through the directory structure. No need to generate static files that need to be updated, when the file system has the information you want. If you only want a sub-set of stocks at a given time, then using glob would be quicker, there is also scandir.
I don't know what Win32 (Windows / Platform SDK) functions are called, if you are developing using Visual C++ as your C compiler. Searching MSDN Library should help you.
Assuming you're running on linux...
ls /path/to/text/files > names.txt
is exactly what you want.
opendir(); on linux.
http://linux.die.net/man/3/opendir
Exemple :
http://snippets.dzone.com/posts/show/5734
In pseudo code it would look like this, I cannot define the code as I'm not 100% sure if this is the correct approach...
for each directory entry
scan the filename
extract the ticker name from the filename
open the file
read the data
create a record consisting of the filename, data.....
close the file
add the record to a list/array...
> sort the list/array into alphabetical order based on
the ticker name in the filename...
You could vary it slightly if you wish, scan the filenames in the directory entries and sort them first by building a record with the filenames first, then go back to the start of the list/array and open each one individually reading the data and putting it into the record then....
Hope this helps,
best regards,
Tom.
There are no functions in standard C that have any notion of a "directory". You will need to use some kind of platform-specific function to do this. For some examples, take a look at this post from Cprogrammnig.com.
Personally, I prefer using the opendir()/readdir() approach as shown in the second example. It works natively under Linux and also on Windows if you are using Cygwin.
Approach 1) I would just have a specific directory in which I have ONLY these files containing the ticker data and nothing else. I would then use the C readdir API to list all files in the directory and iterate over each one performing the data processing that you require. Which ticker the file applies to is determined only by the filename.
Pros: Easy to code
Cons: It really depends where the files are stored and where they come from.
Approach 2) Change the file format so the ticker files start with a magic code identifying that this is a ticker file, and a string containing the name. As before use readdir to iterate through all files in the folder and open each file, ensure that the magic number is set and read the ticker name from the file, and process the data as before
Pros: More flexible than before. Filename needn't reflect name of ticker
Cons: Harder to code, file format may be fixed.
but I'd really like to avoid typing out over a thousand file names into a text file. Is there a better way to approach this?
I have solved the exact same problem a while back, albeit for personal uses :)
What I did was to use the OS shell commands to generate a list of those files and redirected the output to a text file and had my program run through them.
On UNIX, there's the handy glob function:
glob_t results;
memset(&results, 0, sizeof(results));
glob("*.txt", 0, NULL, &results);
for (i = 0; i < results.gl_pathc; i++)
printf("%s\n", results.gl_pathv[i]);
globfree(&results);
On Linux or a related system, you could use the fts library. It's designed for traversing file hierarchies: man fts,
or even something as simple as readdir
If on Windows, you can use their Directory Management API's. More specifically, the FindFirstFile function, used with wildcards, in conjunction with FindNextFile
I am building a basic POS app for my cousin's pharmacy store so that he can dump the software he is currently using and save on license cost.All the medicines name which he has painfully entered into the software have been stored in a file with .d01 extension.
What i want is a way to read the contents of the .d01 file programmatically so that i can import the name of the medicines into my app.
The s/w from which my cousin uses is built in Foxpro(coz i see a lot of .cdx,.idx,.dbf files) and the file which i want to import is with .d01 extension. when i open the file in notepad it is something like this
http://img192.imageshack.us/img192/5528/foxpro.jpg
So I assume its somekind of database table or something. So can anyone please help me in reading this file, as i am not at all aware of foxpro.
Thanks a lot in advance to all those who take out time to reply.
hey guys thank you very much for replying so promptly.. I tried the solution suggested by Otávio and it worked, i will now write a small utility to read the dbf.
It has a good chance of being just a regular .dbf file. Copy it somewhere safe, change the extension to dbf and see if you can open it from foxpro.
Although it may have .cdx files, the actual paste of the file does not appear to be a visually recognizable header format of a VFP table... even if part of a database container. The characters around each column name don't look right. It may be from another language that also utilized "Compound Indexes". I even saw an article about Sybase's IAnywhere too. If worst-case scenario, and it is determined to be a possible fixed-length per row and no dynamic column sizes, you might take the file, strip off what appears to be the header and leave just the data and stream read it in based on how many constant characters are determined for the length. yeah, brute force, but just an option. Again, it doesn't LOOK like a VFP table.
BTW, what is the name of the software he is using... I'd look into that to see if any other type of indication to its source.
It looks sort of like a DBF file - maybe Clipper or something.