Has anyone been able to get a variable record length text file (CSV) into SQL Server via SSIS?
I have tried time and again to get a CSV file into a SQL Server table, using SSIS, where the input file has varying record lengths. For this question, the two different record lengths are 63 and 326 bytes. All record lengths will be imported into the same 326 byte width table.
There are over 1 million records to import.
I have no control of the creation of the import file.
I must use SSIS.
I have confirmed with MS that this has been reported as a bug.
I have tried several workarounds. Most have been where I try to write custom code to intercept the record and I cant seem to get that to work as I want.
I had a similar problem, and used custom code (Script Task), and a Script Component under the Data Flow tab.
I have a Flat File Source feeding into a Script Component. Inside there I use code to manipulate the incomming data and fix it up for the destination.
My issue was the provider was using '000000' as no date available, and another coloumn had a padding/trim issue.
You should have no problem importing this file. Just make sure when you create the Flat File connection manager, select Delimited format, then set SSIS column length to maximum file column length so it can accomodate any data.
It appears like you are using Fixed width format, which is not correct for CSV files (since you have variable length column), or maybe you've incorrectly set the column delimiter.
Same issue. In my case, the target CSV file has header & footer records with formats completely different than the body of the file; the header/footer are used to validate completeness of file processing (date/times, record counts, amount totals - "checksum" by any other name ...). This is a common format for files from "mainframe" environments, and though I haven't started on it yet, I expect to have to use scripting to strip off the header/footer, save the rest as a new file, process the new file, and then do the validation. Can't exactly expect MS to have that out-of-the box (but it sure would be nice, wouldn't it?).
You can write a script task using C# to iterate through each line and pad it with the proper amount of commas to pad the data out. This assumes, of course, that all of the data aligns with the proper columns.
I.e. as you read each record, you can "count" the number of commas. Then, just append X number of commas to the end of the record until it has the correct number of commas.
Excel has an issue that causes this kind of file to be created when converting to CSV.
If you can do this "by hand" the best way to solve this is to open the file in Excel, create a column at the "end" of the record, and fill it all the way down with 1s or some other character.
Nasty, but can be a quick solution.
If you don't have the ability to do this, you can do the same thing programmatically as described above.
Why can't you just import it as a test file and set the column delimeter to "," and the row delimeter to CRLF?
Related
Currently I receive a daily file of around 750k rows and each row has a 3 character identifier at the start.
For each identifier, the number of columns can change but are specific to the identifier (e.g. SRH will always have 6 columns, AAA will always have 10 and so on).
I would like to be able to automate this file into an SQL table through SSIS.
This solution is currently built in MSACCESS using VBA just looping through recordsets using a CASE statement, it then writes a record to the relevant table.
I have been reading up on BULK INSERT, BCP (w/Format File) and Conditional Split in SSIS however I always seem to get stuck at the first hurdle of even loading the file in as SSIS errors due to variable column layouts.
The data file is pipe delimited and looks similar to the below.
AAA|20180910|POOL|OPER|X|C
SRH|TRANS|TAB|BARKING|FORM|C|1.026
BHP|1
*BPI|10|16|18|Z
BHP|2
*BPI|18|21|24|A
(* I have added the * to show that these are child records of the parent record, in this case BHP can have multiple BPI records underneath it)
I would like to be able to load the TXT file into a staging table, and then I can write the TSQL to loop through the records and parse them to their relevant tables (AAA - tblAAA, SRH - tblSRH...)
I think you should read each row as one column of type DT_WSTR and length = 4000 then you need to implement the same logic written using vba within a Script component (VB.NET / C#), there are similar posts that can give you some insights:
SSIS ragged file not recognized CRLF
SSIS reading LF as terminator when its set as CRLF
How to load mixed record type fixed width file? And also file contain two header
SSIS Flat File - CSV formatting not working for multi-line fileds
how to skip a bad row in ssis flat file source
I'm struggling to find a built-in way to redirect empty rows as flat file source read errors in SSIS (without resorting to a custom script task).
as an example, you could have a source file with an empty row in the middle of it:
DATE,CURRENCY_NAME
2017-13-04,"US Dollar"
2017-11-04,"Pound Sterling"
2017-11-04,"Aus Dollar"
and your column types defined as:
DATE: database time [DT_DBTIME]
CURRENCY_NAME: string [DT_STR]
with all that, package still runs and takes the empty row all the way to destination where it, naturally fails. I was to be able to catch it early and identify as a source read failure. Is it possible w/o a script task? A simple derived column perhaps but I would prefer if this could be configured at the Connection Manager / Flat File Source level.
The only way to not rely on a script task is to define your source flat file with only one varchar(max) column, chose a delimiter that is never used within and write all the content into a SQL Server staging table. You can then clean those empty lines and parse the rest to a relational output using SQL.
This approach is not very clean and a takes lot more effort than using a script task to dump empty lines or ones not matching a pattern. It isn't that hard to create a transformation with the script component
This being said, my advise is to document a clear interface description and distribute it to all clients using your interface. Handle all files that throw an error while reading the flat file and send a mail with the file to the responsible client with information that it doesn't follow the interface rules and needs to be fixed.
Just imagine the flat file is manually generated, even worse using something like excel, you will struggle with wrong file encoding, missing columns, non ascii characters, wrong date format etc.
You will be working on handling all exceptions caused by quality issues.
Just add a Conditional Split component, and use the following expression to split rows
[DATE] == ""
And connect the default output connector to the destination
References
Conditional Split Transformation
I need to import sheets which look like the following:
March Orders
***Empty Row
Week Order # Date Cust #
3.1 271356 3/3/10 010572
3.1 280353 3/5/10 022114
3.1 290822 3/5/10 010275
3.1 291436 3/2/10 010155
3.1 291627 3/5/10 011840
The column headers are actually row 3. I can use an Excel Sourch to import them, but I don't know how to specify that the information starts at row 3.
I Googled the problem, but came up empty.
have a look:
the links have more details, but I've included some text from the pages (just in case the links go dead)
http://social.msdn.microsoft.com/Forums/en-US/sqlintegrationservices/thread/97144bb2-9bb9-4cb8-b069-45c29690dfeb
Q:
While we are loading the text file to SQL Server via SSIS, we have the
provision to skip any number of leading rows from the source and load
the data to SQL server. Is there any provision to do the same for
Excel file.
The source Excel file for me has some description in the leading 5
rows, I want to skip it and start the data load from the row 6. Please
provide your thoughts on this.
A:
Easiest would be to give each row a number (a bit like an identity in
SQL Server) and then use a conditional split to filter out everything
where the number <=5
http://social.msdn.microsoft.com/Forums/en/sqlintegrationservices/thread/947fa27e-e31f-4108-a889-18acebce9217
Q:
Is it possible during import data from Excel to DB table skip first 6 rows for example?
Also Excel data divided by sections with headers. Is it possible for example to skip every 12th row?
A:
YES YOU CAN. Actually, you can do this very easily if you know the number columns that will be imported from your Excel file. In
your Data Flow task, you will need to set the "OpenRowset" Custom
Property of your Excel Connection (right-click your Excel connection >
Properties; in the Properties window, look for OpenRowset under Custom
Properties). To ignore the first 5 rows in Sheet1, and import columns
A-M, you would enter the following value for OpenRowset: Sheet1$A6:M
(notice, I did not specify a row number for column M. You can enter a
row number if you like, but in my case the number of rows can vary
from one iteration to the next)
AGAIN, YES YOU CAN. You can import the data using a conditional split. You'd configure the conditional split to look for something in
each row that uniquely identifies it as a header row; skip the rows
that match this 'header logic'. Another option would be to import all
the rows and then remove the header rows using a SQL script in the
database...like a cursor that deletes every 12th row. Or you could
add an identity field with seed/increment of 1/1 and then delete all
rows with row numbers that divide perfectly by 12. Something like
that...
http://social.msdn.microsoft.com/Forums/en-US/sqlintegrationservices/thread/847c4b9e-b2d7-4cdf-a193-e4ce14986ee2
Q:
I have an SSIS package that imports from an Excel file with data
beginning in the 7th row.
Unlike the same operation with a csv file ('Header Rows to Skip' in
Connection Manager Editor), I can't seem to find a way to ignore the
first 6 rows of an Excel file connection.
I'm guessing the answer might be in one of the Data Flow
Transformation objects, but I'm not very familiar with them.
A:
Question Sign in to vote 1 Sign in to vote rbhro, actually there were
2 fields in the upper 5 rows that had some data that I think prevented
the importer from ignoring those rows completely.
Anyway, I did find a solution to my problem.
In my Excel source object, I used 'SQL Command' as the 'Data Access
Mode' (it's drop down when you double-click the Excel Source object).
From there I was able to build a query ('Build Query' button) that
only grabbed records I needed. Something like this: SELECT F4,
F5, F6 FROM [Spreadsheet$] WHERE (F4 IS NOT NULL) AND (F4
<> 'TheHeaderFieldName')
Note: I initially tried an ISNUMERIC instead of 'IS NOT NULL', but
that wasn't supported for some reason.
In my particular case, I was only interested in rows where F4 wasn't
NULL (and fortunately F4 didn't containing any junk in the first 5
rows). I could skip the whole header row (row 6) with the 2nd WHERE
clause.
So that cleaned up my data source perfectly. All I needed to do now
was add a Data Conversion object in between the source and destination
(everything needed to be converted from unicode in the spreadsheet),
and it worked.
My first suggestion is not to accept a file in that format. Excel files to be imported should always start with column header rows. Send it back to whoever provides it to you and tell them to fix their format. This works most of the time.
We provide guidance to our customers and vendors about how files must be formatted before we can process them and it is up to them to meet the guidlines as much as possible. People often aren't aware that files like that create a problem in processing (next month it might have six lines before the data starts) and they need to be educated that Excel files must start with the column headers, have no blank lines in the middle of the data and no repeating the headers multiple times and most important of all, they must have the same columns with the same column titles in the same order every time. If they can't provide that then you probably don't have something that will work for automated import as you will get the file in a differnt format everytime depending on the mood of the person who maintains the Excel spreadsheet. Incidentally, we push really hard to never receive any data from Excel (only works some of the time, but if they have the data in a database, they can usually accomodate). They also must know that any changes they make to the spreadsheet format will result in a change to the import package and that they willl be charged for those development changes (assuming that these are outside clients and not internal ones). These changes must be communicated in advance and developer time scheduled, a file with the wrong format will fail and be returned to them to fix if not.
If that doesn't work, may I suggest that you open the file, delete the first two rows and save a text file in a data flow. Then write a data flow that will process the text file. SSIS did a lousy job of supporting Excel and anything you can do to get the file in a different format will make life easier in the long run.
My first suggestion is not to accept a file in that format. Excel files to be imported should always start with column header rows. Send it back to whoever provides it to you and tell them to fix their format. This works most of the time.
Not entirely correct.
SSIS forces you to use the format and quite often it does not work correctly with excel
If you can't change he format consider using our Advanced ETL Processor.
You can skip rows or fields and you can validate the data the way you want.
http://www.dbsoftlab.com/etl-tools/advanced-etl-processor/overview.html
Sky is the limit
You can just use the OpenRowset property you can find in the Excel Source properties.
Take a look here for details:
SSIS: Read and Export Excel data from nth Row
Regards.
I wrote an SSIS package which imports data from a fixed record length flat file into a SQL table. Within a single file, the record length is constant, but different files may have different record lengths. Each record ends with a CR/LF. How can I make it detect where the end of the record is, and use that length when importing it?
You can use a script task. Pass a ReadWriteVariable into the script task. Let's call the ReadWriteVariable intLineLength. In the script task code, detect the location of the CR/LF and write it to intLineLength. Use the intLineLength ReadWriteVariable in following package steps to import the data.
Here is an article with some good examples: script-task-to-dynamically-build-package-variables
Hope this helps.
This may not work for everyone, but what I ended up doing was simply setting it to a delimited flat file and setting CR/LF as the row delimiter, and leaving the column delimiter and text qualifier blank. This won't work if you actually need to have it split out columns in the import, but I was already using a Derived Column task to do the actual column splitting, because my column positions are variable, so it worked fine.
I have a huge amount of trouble loading spreadsheets into a SQL Server database.
Currently, I'm using an SSIS package to load the data and I have had to make lots of adjustments to get the data to load:
All numbers must be formatted as text (otherwise they don't load properly).
Sometimes numbers must be preceded with single quote (') to get them to load.
If a column has a mix of number cells and text cells, the text cells must come first in the file (otherwise only numbers load and text comes in as NULL).
If a user changes a column name the file will not load.
If a user changes a tab name the file won't load.
If a user adds a new column (even at the end of a sheet) the file won't load.
Extra sheets in the file is not a problem, thankfully!
Dates seem sensitive whether or not they will load properly.
Connection strings to the Excel file must include "IMEX=1" or things are worse.
Scheduled SSIS jobs must be run as 32-bit even on 64-bit system.
I've been loading the data (usually 200,000-500,000 rows per file) into a table with all fields defined as nvarchar. Then, when loaded I transfer that data in the next step of the SSIS package to the working table with typed data fields.
All of the requirements that I must put on the user for how to format the Excel file is really a pain. We usually have to send the file back multiple times until all the formatting issues are correct before the file will load. I'd like to eliminate this thrash.
I know I'm not the only one that is facing this type of problem. So, I must ask...
What is a better alternative to Excel for loading data into a SQL Server database?
Or, am I going about this the wrong way? Should I be using something other than SSIS to load Excel spreadsheets?
You can try OpenRowSet:
SELECT *
INTO SomeTable
From OpenRowSet('Microsoft.Jet.OLEDB.4.0',
'Excel 8.0;Database=\\servername\c$\filename.xls;HDR=YES;IMEX=1', [Sheet2$])
Not really a SQL answer, but an easy one:
You could require the users to copy and paste data to an excel spreadsheet where everything but the data fields to be included are locked. This will prevent many of the pain points described.