I am stuck while completing a trailhead, actually I want to disconnect my salesforce org from trailhead playground but its disabled, I want to refresh Salesforce Account so that I can complete my trailheads , but I am not able to disable it, can any let me how I can make that disconnect button to be enabled in trailhead Hands-On Orgs section. plz help me out I am new to salesforce.
Hand-On Org Disabled Image
I tried logging out from Trailhead and then re logging in , tried to clear cache memory , even tried to launch the org and the under Hand-Orgs section , i tried to refresh it.
Related
Just getting around to setting up some more detailed reporting in our OneLogin setup, and I'm not sure how to go about the title to this question. How would I create a new notification to alert us when a user account gets reactivated in any way and by whom it was done by?
This has been somewhat helpful, but I feel like there are more OL database values that can and/or need to be used to get what I need.
In your administration panel there is a tab for Notifications under the Activity tab. You are able to configure a email notification whenever an account is reactivated.
Upon getting the email you can log into your administration panel and view the user profile within the account to view who made the changes.
I am not an expert on the UI side of Onelogin, but I work on the engineering team. There may be an easier way to do this, but the functionality is there.
I am trying to obtain my production keys for my QBO app following the steps in this link
here
However, when I try to start the "App Assessment Questionnaire", I get the error message below:
You currently do not have a developer account, please click here to complete setting up your developer account. Once that is complete you will be able to access the help pages.
This is what I see, and I DO have a developer account. It won't let me continue.
Please help!
UPDATE
I see this error in the address bar:
ErrorCode=ERROR_CREATING_USER&ErrorDescription=License+Limit+Exceeded
UPDATE #2
I tried creating a brand new account, a new app, on a different PC and the same thing happened. So this is not a cache issue.
UPDATE #3
Created 2 support tickets for this issue
#00114423
#00114415
I had to use a different account to access the help site
https://help.developer.intuit.com
I've the same issue since Friday (02/18) and spent hours to figure out what's the problem.
tried from different browsers and different IP addresses
made a brand new developer account to test with it
had a 1+ hour chat session with QB support (but not developer support)
sent an email to an address received from the chat assistant
sent a feedback at https://www.surveymonkey.com/r/AppAssess
According to the browser's developer tools:
the Start questionnaire button opens this URL:
https://developers.intuit.com/app/developer/appdetail/prod/questionnaire?appId=xxxxx:UUID_of_app
then it redirects to:
https://login.salesforce.com/services/auth/sso/yyyyyyyyyyy/Intuit_Enterprise?community=https://help.developer.intuit.com
finally, SSO to salesforce fails and it redirects back to:
https://developer.intuit.com/app/developer/qbpayments/docs/qbms-payments/hosted-paypage/faqs/help-redirect?**ErrorCode=ERROR_CREATING_USER&ErrorDescription=License+Limit+Exceeded**+-+Customer+Community+Login&ProviderId=xxxxxx&startURL=%2Fs%2Fquestionnaire%3Fapp%yyyyyyyyyyyyy
So, it seems to be, QB have reached a license limit at salesforce, which prevents new logins to create and the questionnaire from to load.
And the funny part is: the same thing happens, when I tried to create a support ticket and used the "Ask a question" button at https://help.developer.intuit.com/s/
Which means, I can't start the questionnaire and can't start a ticket about the error either.
I guess, if QB developer accounts whom created support tickets previously or started the questionnarie before the license limit has been reached, they have have a SSO login account at salesforce and able to fill in the form or start new support tickets, but others are stuck because of the license limit.
If somebody have a working QB developer account and able to start a support ticket, please do it, and link this page in it.
Or maybe, we should contact salesforce support to let QB know about the license limit.
I'll give it a try.
This seems to have been fixed. I tried running the questionaire and it worked.
I have also been having this problem the last several days and had the same lack of success with QB support. The URL callback error I see is:
ErrorCode=REGISTRATION_HANDLER_ERROR&ErrorDescription=Please+sign+the+terms+of+service+before+you+login+to+community
I don't see anywhere I can sign a TOS in my account page - it's possible that in fact QBO hasn't signed a TOS with Salesforce. What a joke.
We have Salesforce prod/live account, where we needed to add DocuSign.
While clicking the DocuSign tab under Saleforce tab "DocuSign Admin",
we are getting error message like this: "Sorry you do not have access to this page".
Also in the Layout Tab, adding Remote URL is not working.
If i add "Send with DocuSign" with any object like Account and click that button, it giving authentication error message like this:
Can anyone help/guide me to find out the issue and resolve.
Got response from DocuSign Support team about this issue.
Hi Yousuf,
Welcome to the DocuSign Support Community!
It sounds like you have a trial DocuSign account. If that's the case, DocuSign Services that are available for a Free Trial may not include or allow access to all features or functions.
If you have further questions, please let us know.
Thank you.
Donna
DocuSign Support Community Moderator
https://docusigncommunity.force.com/CSP_Answers?question=9061W000000boYb
While trying to use the query editor in developer console.
"SELECT ID FROM ACCOUNT"
It throws an erorr saying "This session is not valid for use with the REST API".
Any idea what excatly tthe issue here. Earlier it workerd fine.
The same problem when i click on "Open" dialog of developer console and select objects.
"CANNOT LOAD OBjects.This session is not valid for use with the REST API"
I ran into this same issue, where I could open Visualforce pages, Apex, etc but it would give me the error "This session is not valid for use with the REST API" any time I tried to use the Query Editor or create a new Trigger (which needs the object list) via the Developer Console. I tried every browser, flushing cookies, logging in as other users, etc with the same results.
I found that our org has API white listing enabled (https://help.salesforce.com/HTViewHelpDoc?id=security_control_client_access.htm&language=en_US) which blocks the API calls access unless explicitly granted.
From the Salesforce Documentation
"Contact Salesforce to enable API Client Whitelisting. After it’s enabled, all client access is restricted until explicitly allowed by the administrator. This restriction might block access to applications that your users are already using. Before you enable this feature, you should configure and approve connected apps for any client applications you want users to continue using, or give the users a profile or permission set with “Use Any API Client” enabled."
So adding the "Use Any API Client" permission set to your user profile should fix the issue.
To do this via a Permission Set, you can go to Setup > Users > Permission Sets and create a new one. Add a System Permission of 'Use Any API Client'.
There may be a way to enable API access for the Developer Console via whitelisting or the app settings but I was not able to easily find a way. You would definitely want to test whatever functionality you are creating with a user that does not have that permission enabled.
This is happening because of connected app is not configured correctly.
On 'API (Enable OAuth Settings)' panel, move 'Access and manage your data (api)' option from left to right of Selected OAuth Scopes field and then save the setting.
Wait for few minute and then try. It should work.
Looks like just the session is expired. Did you try to close developer console, relogin to your SF sandbox and open developer console again?
Create a Permission Set, and add a System Permission of 'Use Any API Client'.
And associate this permission set to users. It will solve the problem.
Ive been advised by Docusign to post here.
I have 4 clients who I've installed the Docusign for Salesforce App for. I've followed the installation instructions and every time I end up with the same error. When it comes to entering my Salesforce credentials it says they are wrong or I have not added the trusted network. I know the credentials are correct and I have entered the trusted network. I've tried various things like using security token in the password, configuring at the docusign end. Nothing works, Docusign don't know what the issue is, I've also raised a case with Salesforce and they can't help. I can't understand why an App on the app exchange can't get passed configuration and noone can help! Hopefully someone here can help. Thanks
The DocuSignAPI tag on Stack Overflow is used for api development and integration questions normally, however I will try to address your issue...
First off, if you could update your question with a screenshot of the error and screen you are on when you receive the error that would help isolate the issue.
With that in mind, what screen are you on? Are you on the screen that's titled "Connect DocuSign to Salesforce"? Even though you've mentioned I just want to double check that you are entering your Salesforce user credentials and not your DocuSign credentials.
Next, what environment are you selecting? And what type of DocuSign account do you have? You need to make sure that you are pointing to an environment where you have an existing account. For instance, if you have a DocuSign demo account but you are pointing to Production during the install, you might get that error.