When I run the ioslate.c file I get the error:
unable to read .replit:
unable to decode .replit: toml: cannot load TOML value of type map[string]interface {} into a Go string
help?
Related
After booting SWUpdate yocto-generated image for the first time, executing swupdate results in error message:
Error parsing configuration file: 'globals' section missing, exiting.
I tried to strictly follow SWUpdate's documentation, but it gets short when it comes to yocto integration. I'm using meta-swupdate, meta-swupdate-boards, and meta-openembedded layers together with poky example repository all at Kirkstone tag, building via bitbake update-image and having modyfied local.conf as:
MACHINE ??= "raspberrypi4-64"
ENABLE_UART = "1"
RPI_USE_U_BOOT = "1"
IMAGE_FSTYPES = "wic ext4.gz"
PREFERRED_PROVIDER_u-boot-fw-utils = "libubootenv"
IMAGE_INSTALL:append = " swupdate"
Is there anything else I need to modify to generate the configuration file and be able to run SWUpdate binary properly?
Side question: In the documentation, it's recommended to append swupdate-www to achieve a better web server. However, if I append it, there is no swupdate-www binary inside the `/usr/bin' directory.
As with other recipes folders the recipes-support/swupdate/swupdate/raspberrypi4-64 folder was missing inside the meta-swupdate-boards layer. Therefore, an empty config file was always generated. After adding this folder and all related files, strongly inspired by raspberrypi3 folder, the error was gone and swupdate -h provided the expected output.
There was also one new error during build process thrown by yocto. It was related to missing systemd requirement and was solved by adding:
DISTRO_FEATURES_append = " systemd"
to local.conf
I'm trying to initialize MongoDB from a tutorial and I had to write the following code:
mongod --directoryperdb --dbpath C:\mongodb\data\db --logpath C:\mongodb\log\mongo.db --logappend --install
After I type it, it gives me the following error:
2018-02-27T21:11:20.978-0800 F CONTROL [main] Failed global initialization: FileNotOpen: Failed to open "C:\mongodb\log\mongo.db"
I don't have the directory "log" but nor does the guy in the tutorial, so I'm a little confused what might be the problem.
The problem was that I didn't have the files "log" and "data", and inside of data the file "db". You have to create those files manually in order for it to work.
I need to open my system monitor in the QTCreator, but when I try to do it I obtain the following error message:
/home/arakul/sysmon.sgrd: 2: /home/arakul/sysmon.sgrd: Syntax error: newline unexpected
I am trying to open the system monitor by using the following command:
execlp("/home/arakul/sysmon.sgrd","",NULL);
Sorry for my stupid question. I must use command ksysguard with parametrs.
system("ksysguard --desktopfile sysmon.sgrd");
Hello I have tried to build an application and send it to an android build but am getting an build error.
This is a small snippet of exception in error log that I got when I put the build onto the server.
Unknown source file : UNEXPECTED TOP-LEVEL EXCEPTION:
Unknown source file : java.lang.RuntimeException: Exception parsing classes
Unknown source file : at com.android.dx.command.dexer.Main.processClass(Main.java:752)
Unknown source file : at com.android.dx.command.dexer.Main.processFileBytes(Main.java:718)
Unknown source file : at com.android.dx.command.dexer.Main.access$1200(Main.java:85)
Unknown source file : at com.android.dx.command.dexer.Main$FileBytesConsumer.processFileBytes(Main.java:1645)
Unknown source file : at com.android.dx.cf.direct.ClassPathOpener.processArchive(ClassPathOpener.java:284)
Unknown source file : at com.android.dx.cf.direct.ClassPathOpener.processOne(ClassPathOpener.java:166)
Unknown source file : at com.android.dx.cf.direct.ClassPathOpener.process(ClassPathOpener.java:144)
Unknown source file : at com.android.dx.command.dexer.Main.processOne(Main.java:672)
Unknown source file : at com.android.dx.command.dexer.Main.processAllFiles(Main.java:574)
Unknown source file : at com.android.dx.command.dexer.Main.runMonoDex(Main.java:311)
Unknown source file : at com.android.dx.command.dexer.Main.run(Main.java:277)
Unknown source file : at com.android.dx.command.dexer.Main.main(Main.java:245)
Unknown source file : at com.android.dx.command.Main.main(Main.java:106)
Unknown source file : Caused by: com.android.dx.cf.iface.ParseException: bad class file magic (cafebabe) or version (0034.0000)
Unknown source file : at com.android.dx.cf.direct.DirectClassFile.parse0(DirectClassFile.java:472)
Unknown source file : at com.android.dx.cf.direct.DirectClassFile.parse(DirectClassFile.java:406)
Unknown source file : at com.android.dx.cf.direct.DirectClassFile.parseToInterfacesIfNecessary(DirectClassFile.java:388)
Unknown source file : at com.android.dx.cf.direct.DirectClassFile.getMagic(DirectClassFile.java:251)
Unknown source file : at com.android.dx.command.dexer.Main.parseClass(Main.java:764)
Unknown source file : at com.android.dx.command.dexer.Main.access$1500(Main.java:85)
Unknown source file : at com.android.dx.command.dexer.Main$ClassParserTask.call(Main.java:1684)
Unknown source file : at com.android.dx.command.dexer.Main.processClass(Main.java:749)
Unknown source file : ... 12 more
Unknown source file : 1 error; aborting
:preDexDebug FAILED
:preDexDebug (Thread[Daemon worker,5,main]) completed. Took 56.932 secs.
Starting process 'command '/usr/java/jdk1.7.0_67/bin/java''. Working directory: /tmp/build2186746778357232766xxx/Starter Command: /usr/java/jdk1.7.0_67/bin/java -Xmx2048M -Dfile.encoding=UTF-8 -Duser.country=US -Duser.language=en -Duser.variant -cp /home/ec2-user/android-sdk/build-tools/23.0.1/lib/dx.jar com.android.dx.command.Main --dex --verbose --force-jumbo --num-threads=4 --output /tmp/build2186746778357232766xxx/Starter/build/intermediates/pre-dexed/debug/classes-050c44252ac48b6fb75508d313fd95ce08e1abcc.jar /tmp/build2186746778357232766xxx/Starter/build/intermediates/exploded-aar/com.google.android.gms/play-services-gcm/8.3.0/jars/classes.jar
FAILURE: Build failed with an exception.
Please find the attached error log
This was due to us changing the behavior of Google Play Services. We are looking to redeploy the change with a slightly more conservative approach so we would still need the error log to confirm exactly what went wrong.
same happen for me
Log
com.codename1.social.GoogleImpl.init();
^
symbol: class GoogleImpl
location: package com.codename1.social
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
1 error
:compileReleaseJavaWithJavac FAILED
:compileReleaseJavaWithJavac (Thread[Daemon worker,5,main]) completed. Took 21.094 secs.
I use file:consult function to read data from config file of my application. But some times i got error: {badmatch,{error,system_limit}} How can i avoid this?
I read about ERL_MAX_PORTS, but i haven't this variable:
echo $ERL_MAX_PORTS
i got empty string. How i can correctly set ERL_MAX_PORTS or can i find other methods to avoid this error?
Thank you