I have installed ColdFusion 2021 and can access the administrator at the following URL: http://127.0.0.1:8500/CFIDE/administrator/index.cfm
I have created a site and set up the datasource, but I can't preview it in a browser. I keep getting a 404 error — The page you are trying to access can not be displayed. Please try again or notify the administrator. When I look at my DSN settings, it's default to port 1433, not 8500. When I click 'verify' for the datasource, nothing happens. The status is blank. What am I overlooking?
This is the URL I'm using to test (folder name/file name): http://localhost:8500/mysite/addAgent.cfm
Thank you.
The port 8500 for the Coldfusion administrator has it's own webserver built in.
The CF admin will only serve it's own pages. You usually need a separate webserver that talks to Coldfusion with a handler. IIS, Apache, etc. Try removing the port for your own custom pages. Think of it as a separate site.
It looks like you are confusing at least 3 concepts.
You can get to the CF admin. That is a good thing.
Inside the CF admin is the DSN Settings. That is just a normal CF admin page. Port 1433 is how SQL Server communicates with systems external to it, like ColdFusion. Port 1433 is not a page.
ColdFusion has a built in server. Are you looking for the directory that ColdFusion uses for its built in server, cf_root/cfusion/wwwroot You can just add a subdirectory and file as needed.
Related
I cannot access anymore the planon application using the link provided in Tellit (http://prod478.prod.telenet.be:18070/startpage/PROD/START).
I get this error message in my browser:
enter image description here
Tried restarting VPN (Palo Alto), different browsers, incognito mode, restarting laptop, ...
Found out the problem is the app has been migrated to a server which is not accessible through VPN.
You need to access it through Remote Desktop.
One possible way to achieve this is go to this link : https://rdweb.wvd.microsoft.com/arm/webclient
then yo can use the provided Edge browser to browse to the Planon app.
However in order to do so, you need to request one additional TIM right:
(A) AVD - AG - PRD - Digital Solutions (Groups Azure Virtual Desktop)
I had also asked this one PA_Planon (Groups SSL VPN), but suppose it was not useful anymore as VPN access is not allowed.
I've a vps with plesk running, all it's working fine except for sending email.
Most of the email remain in the queue and a first look to the maillog is show that the receiver refused since the server fqdn is not correct.
I've searched around the plesk panel, but maybe I'm missing somenthing...is a parameter configurable only via console?
Depends on the version of Plesk you are using! Versions < 10 don't have an explicit settings in the panel and you have to configure it via hostname command. Versions >= 10 has a handy field in the settings.
This question may be a dublicate, but no recent post leads to a working answer for my case.
I have a Sharepoint 2013 running on a Windows Server 2012. Following issue appeared:
I made a new Site-Collection as wiki. Everything (links,...) works fine on the server but when I want to access the wiki from outside (not localhost) the server runs in a 404 Not found error.
http://localhost/sites/wiki/Pages/Home.aspx - works fine(localhost)
http://10.38.0.15/sites/wiki/Pages/Home.aspx - doesn't work.
I checked the IIS settings, all servers are up and running. The log file has no errors in it.
Does anyone know, how to solve this problem?
thx
Jürgen
The most common cause for this is that you don't have the IIS host header configured correctly. The 404 will appear because you are hitting a different IIS web site and not the one you intended to.
If you go into IIS Manager and click on "Sites" in the right hand pane there will be a column called bindings and a column called ID.
IIS will check in the order of ID for the first site that matches. Make sure the default site is stopped. If you see bindings that look like the following:
ID 1: Bindings: *:80
ID 2: Bindings: www.yoursite.com:80
www.othersite.com will match ID 1. Any other site that doesn't specify a port or https: will be directed to ID 2. You need to ensure that the site you are trying to access matches your bindings. The "www.yoursite.com" is added to the site via "New Web Application" in SharePoint. There is a field called Host: in Central Administration. This should match what you are typing from inside and outside the server. If you need the site to respond to multiple names, you need to extend the web application.
Assuming you used the default of claims authentication, here are the instructions for that:
http://technet.microsoft.com/en-us/library/gg276325.aspx
I am not sure if this is still required in Server 2012, but disabling the loopback check might also help, although this usually results in a 401, and repeated attempts to log in. Here are the instructions for that.
http://support.microsoft.com/kb/896861
Сheck the alternate access mapping in SharePoint administrator.
It should be something like this:
http://yourservername default
http://10.10.1.30:80 internet
http:// so on ..
I followed the installation guide for an Apache Web Policy Agent, but it always results in an endless redirect loop between web and application server. Firefox says "The page isn't redirecting properly" and Chrome thinks that "This webpage has a redirect loop". The setup is an Apache 2 on port 80 with a small demo app and a Web Policy Agent, and a Tomcat 7 server on port 8080 with an OpenAM server (the former OpenSSO from Sun):
App URL http://hostname.example.com:80/ (App and Agent, running on Apache 2.2.16)
OpenAM Server URL http://hostname.example.com:8080/openam (running on Tomcat 7.0.12)
The Live HTTP Header Firefox plugin shows that the policy agent and the OpenAM server (i.e. the Apache and Tomcat servers) redirect to each other, although the server sets the SSO Token Cookie correctly. The name of the SSO Token Cookie has the default value "iPlanetDirectoryPro". Any idea how to solve the problem?
After a whole week I finally figured it out, with the help of Stackoverflow and the OpenAM Mailing list. There were two main problems: missing log files and missing cookie domains. Installing the OpenAM server and the Web Policy Agent is difficult, there are a lot of log files and many different configuration options. If you select the wrong options, it won't work. It is impossible to make it work without knowing what is going on, which can only be determined by a suitable log file.
Missing Log for Web Policy Agent : The log level must be set in the "Java properties" files. There are two "Java Properties" files for the Web Policy Agent, OpenSSOAgentBootstrap.properties and OpenSSOAgentConfiguration.properties. The log and debug level which is named com.sun.identity.agents.config.debug.level can and must be defined in both (!) files, and it should be set to the high level, all:4 or all:5. The format is important. Even if you do this, the AgentConfiguration.properties file is only used when the agent is not working in centralized config mode. The profile must be set to "local".
Missing Cookie Domain: Do not forget to enter the right Cookie Domain during the setup of the OpenAM server in the beginning, or add it afterwards if it is missing. On the OpenAM server, go to Configuration > System > Platform and change the Cookie Domain Value to your domain (for instace .example.com) if it is missing. Otherwise the browser will lose your cookie during the redirect process. Somehow I had an empty entry for the cookie domain at the OpenAM server, I guess a forgot a dot (example.com instead of .example.com) so that it was invalid (or something like that).
This troubleshooting site was helpful to locate the problem.
#0x4a6f4672, Your post was absolutely helpful . Some more to add to your answer. The following changes is what i had to do in the config to make it running, at-least getting it running it for alfresco.
com.sun.identity.agents.config.user.mapping.mode=USER_ID(Dont use HTTP_HEADER)
com.sun.identity.agents.config.user.attribute.name=uid
com.sun.identity.agents.config.user.principal=true(Dont use false)
com.sun.identity.agents.config.user.token=SsoUserHeader(Keep it as per what is specified in you application- in my case alfresco)
Now you are not running the Agent in centralised mode but in local mode the setting which is specified for profile attribute can be only set via property file so add the following.
com.sun.identity.agents.config.profile.attribute.fetch.mode=HTTP_HEADER
com.sun.identity.agents.config.profile.attribute.mapping[uid]=SsoUserHeader(whatever you want the header to come in browser as)
As told by 0x4a6f4672, it is difficult to debug and unless you are in local mode , so switch to local mode immediately and start tracing the logs and make the property changes accordingly.
I have a VPS hosting service. First of all, I installed bind9 and everything that my main website works just fine. Now, I bought another domain and set its nameserver address&ip to my website ones.
I added a configuration file of that site like '/etc/apache2/sites-available/www.example.com' and I did 'a2ensite www.example.com' to enable the website to apache2. After one, when I reloaded my server, I see '000default' and 'www.example.com' in my '/etc/apache2/sites-enabled/' directory.
I have thought I am done with settings, but I still cannot connect to the domain example.com. I think I have read it somewhere that I have to set up 'zone' thing which I did when I was setting dns.
For example,
zone "example.com" IN {
type master;
file "example.zone";
allow-update { none; };
};
Is this correct? If so, what are the things that I need to do afteron?
I can see a very descriptive answer here It includes everything from hosting multiple domains to even getting sub domains up on the same VPS.