I have standalone SQL Server 2019 Developer Edition installed on my machine. I am able to use pymssql to connect to it and write data in. Using this method to connect:
conn = pymssql.connect(
host='my_host',
user="airbyte_reader",
port = 1433,
password = '******',
database = "my_db")
#arranged like this for Stack's readability, not to infuriate people.
Then my Airbyte container is running on the same machine and I can see the UI on my localhost:8000. When I try to create a SQL Server source it requires
Database
Host
Password
Port
Username
I've confirmed in SQL Server Configuration Manager that TCP/IP is enabled, and that dynamic port allocation is off, and that the static port is set to 1433. Using a user login I created I'm able to login through SQL Server Management Studio. However, when I provide Airbyte that same user, password, port, host, and database. It gives me this error message when connecting:
Could not connect with provided configuration. Error: Cannot create
PoolableConnectionFactory (The TCP/IP connection to the host
my_host, port 1433 has failed. Error: "my_host. Verify the
connection properties. Make sure that an instance of SQL Server is
running on the host and accepting TCP/IP connections at the port. Make
sure that TCP connections to the port are not blocked by a
firewall.".)
Not sure what else I can troubleshoot here, but according to the symptoms above anyone know what's going on?
(Also this is just for testing out Airbyte this isn't an actual architecture or solution)
With help from #AlwaysLearning
If you have this issue, first make sure you're using a user that can authenticate via SQL Server Authentication.
Then from SQL Server Configuration Manager get the IPv4 address and use that in the field for "host" in the airbyte UI.
Related
I have 2 PC's on my at-home network and when I use this Microsoft connect utility trick to test database connection, I can connect to the database in SQL Server Express on the PC that SQL Server Express is installed on with no problem.
But when I using the same utility trick on the other PC and try to test the same database connection, I get an error
Test connection failed because of an error in initializing provider. [DBNETLIB][ConnectionOpen server does not exist or access denied
I have Norton Security Suite on the PC where SQL Server Express is installed on, and added a rule to open port 1433 and even disabled "Smart Firewall" and get the same error. I even added a DB user (Used in .UDL utility shown below) with all rights, same error. Any ideas on a way to fix this?
By default SQL Express doesn't have TCP/IP enabled, and by default listens on a dynamic port when it is enabled. You can use SQL Server Configuration Manager to both enable TCP/IP and disable dynamic ports and configure SQL Server to listen on port 1433.
And once you do you can connect with just the hostname. No port number or \SQLEXPRESS required.
Background
I have a SQL Server database on my machine, using mixed mode auth and SQL users setup on the database and mapped. When connecting via .NET app, I am able to use both windows auth and sql auth without issues. However when connecting via AWS Schema Migration tool, I am not able to connect.
Checks done:-
SQL Server Browser Service running
Port mapping left to default (1433)
TCP/IP pipeline enabled
Done both sql and windows auth
Instance name given via ##servername command as per SCT doc
Windows user given dbo and serveradmin permissions at global level
and also granted Login and DB engine connect
Ignoring the port no
Ignoring the instance name
Unable to check firewall as both SQL and tool running on same machine
Using same SCT config, I can connect to SQL Server elsewhere so drivers seem to be working.
Log message below
When only localhost provided
com.amazon.sct.dbloader.DbLoaderHandledException: Connection wasn't established. Check connection properties.
java.util.concurrent.ExecutionException: com.amazon.sct.dbloader.DbLoaderHandledException: Connection wasn't established. Check connection properties.
When name provided for machine and instance
Connection to 'jdbc:sqlserver://localhost\DESKTOP-N01JO12:1433' wasn't established. ERROR: code: 0; message: The TCP/IP connection to the host localhost, port 1433 has failed. Error: "Connection refused: connect. Verify the connection properties. Make sure that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port. Make sure that TCP connections to the port are not blocked by a firewall.".
LOADER ERROR Error chain:
The TCP/IP connection to the host localhost, port 1433 has failed. Error: "Connection refused: connect. Verify the connection properties. Make sure that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port. Make sure that TCP connections to the port are not blocked by a firewall."
Screenshots
For AWS SCT can access SQL server, the following conditions need to be satisfied:
DB has login account and user
User have to has admin role
SQL server authentication enabled
TCP/IP cho SQL server enabled
1. DB has login account and user
You can reference in this link:
https://www.guru99.com/sql-server-create-user.html
2. User have to has admin role
You can reference in this link: https://tableplus.com/blog/2018/10/how-to-create-user-with-admin-access-in-sql-server.html
3. SQL server authentication enabled
You can reference in this link:
SqlServer: Login failed for user
Note: Remember to restart SQL server
4. TCP/IP cho SQL server enabled
You can reference in this link: https://www.youtube.com/watch?v=p9mv2RP6Tck
==> Conclusion
I see you do all the think above
Here is my connection information for SQL server on my EC2 windows server
(I can't embed picture because I don't have enough reputation point)
Perhaps you should write connection information like me
Hope this help!
I'm trying to connect to the sql server that has been created on Azure using SQL management studio, but i'm getting the following error.
Error message: An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
I have enabled the client IP in the SQL server firewall settings.
Please let me know if anything else need to be taken cared. Thank you
To resolve this error, try one of the following actions:
Make sure that you have configured the firewall on the computer to allow this instance of SQL Server to accept connections. That is, If you are trying to connect from within a corporate network, outbound traffic over port 1433 may not be allowed by your network's firewall. If so, you cannot connect to your Azure SQL Database server unless your IT department opens port 1433. On the Azure Side, you also need to check if the NSG (associated with that subnet the Azure SQL server sitting in) allows the client IP with the specific port 1433.
Add the client IP in the SQL server firewall settings if you enable a server-level firewall.
Telnet the current IP of your Azure SQL Database server with the port to verify the network connection.
Ensure the server name you are connecting to is correct.
Check that your own firewall allows your connection across the internet to the instance.
Typically if it was the Azure firewall side, it would prompt you to add your IP to the firewall rules, provided you're connecting with an admin account.
This cause by network restriction in your lan. you can try by switching your network connnection. It worked for me.
I forwarded port 1433 to 9082 on my server, at firewall set to allow for inbound and outbound, at SQL Server Allow Remote is ON.
But, I can't connect to my SQL Server from client.
I installed SQL Server 2012.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
Solution to problems connecting to MS SQL server with Microsoft SQL Server Management Studio if your port is forwarded
I had problem with this as well. It's been bugging me for days now. Finally I stumbled on solution on this page so I'll exclude it as screenshot:
It's not : like in all other systems, you have to put ,
First off check in the ERRORLOG the port used by SQL Server (there is no guarantee it will always listen on 1433, or if TCP is enabled at all).
In the ERRORLOG, at startup, you will find a line like this one:
In my case the port is indeed 1433 but yours may be different. If needed, you can change it using the SQL Server Configuration Manager.
Secondly, if you are forwarding a port to a different one (like your example from 1433 to 9082) you are in fact disabling the SQL Server Browser. This happens because SQL Server Browser does not know of your port forward so it will tell the clients to connect to 1433 (supposing you are allowing UDP 1434 otherwise you won't be able to reach SQL Server Browser at all).
You can connect to a SQL Instance without using the SQL Server Browser though, all you need is to specify the port in the connection string (without the instance name, if any).
For example, if your instance is called MYSERVER/INST your connection string will be something like:
User ID=*****;Password=*****;server=tcp:MYSERVER,9082
Also make sure to configure your SPNs manually otherwise Kerberos won't work.
You can find more details on how to compose the right connection string here: SqlConnection.ConnectionString Property.
try config your router first. after all connect. Btw, already enable TCP/IP #sql yet or not?make sure open port for sql.
check on sql configuration enable or not for open connection
check firewall open or not
check router open or not
check connection lag or not(if network). local no need
make sure sql browser and agent run(for xp if not xp just enable sql browser)
if not all there maybe you wrong installation. if for network work install local/system. not network(this for attach #server cluster)
Initial Attempt
I have an Azure VM with Windows Server 2012, on which I just installed SQL Server 2012 Express Database Engine component. Then, I followed the instructions here to connect remotely with SQL Server Management Studio.
Create a TCP endpoint for the virtual machine
Open TCP ports in the Windows firewall
Configure SQL Server to listen on the TCP protocol
Configure SQL Server for mixed mode authentication
Create SQL Server authentication logins
Determine the DNS name of the virtual machine
Connect to the Database Engine from another computer
After step seven I received the following error:
A network related or instance-specific error occurred while
establishing a connection to SQL Server. The server was not found or
was not accessible. Verify that the instance name is correct and that
SQL Server is configured to allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
(Microsoft SQL Server, Error: 53)
What else do I need to configure before connecting remotely?
Troubleshooting
I have been following the troubleshooting instructions here. Each blockquote below is a step described that that link.
Confirm the instance of the SQL Server Database Engine is installed
and running.
Done. We installed SQL Server Express, and it is running as a named instance called SQLEXPRESS.
If you are attempting to connect to a named instance, make sure the
SQL Server Browser service is running.
Done. We followed the steps here to turn on the SQL Server Browser service.
Get the IP Address of the computer.
Done. We will use these later for testing connectivity and maybe for setting up a static port for SQLEXPRESS.
10.241.62.155
fe80::45c:8c29:e19f:f78b%15
Get the TCP port number used by SQL Server.
Done. The SQL Server Management Studio server logs showed that the server was listening on port 49169.
Enable Protocols
Done. We had already enabled TCP/IP in the configuration manager, but we restarted the SQL Server Service just in case.
Testing TCP/IP Connectivity
Done. We used tcping.exe to test connectivity (cmd ping doesn't work quickly with Azure.) We were able to connect to port 80.
tcping.exe buddha.cloudapp.net > successful
tcping.exe buddha.cloudapp.net 80 > successful
Testing a Local Connection
Done. We used sqlcmd.exe from the command prompt and were able to connect locally via TCP with a username and password.
sqlcmd -S Buddha\SQLEXPRESS (success via shared memory protocol)
sqlcmd -S tcp:Buddha\SQLEXPRESS (success via TCP)
sqlcmd -S tcp:Buddha\SQLEXPRESS -U sa -P (success via TCP with username)
sqlcmd -S tcp:10.241.62.155\SQLEXPRESS -U sa -P (success with internal IP)
Opening a Port in the Firewall
We opened the port on which we SQLEXPRESS listens. The server logs (above) showed that SQLEXPRESS was listening on port 49169, but this is just one of many dynamic ports, and we wanted to set up the static port 1435.
Use WF.msc to create an inbound TCP rule for port 1435.
Use Azure Management Portal to create a TCP endpoint for port 1435.
The troubleshooting instructions also say:
If you are connecting to a named instance or a port other than TCP
port 1433, you must also open the UDP port 1434 for the SQL Server
Browser service.
Since we are connecting SQLEXPRESS (a named instance), we needed to open port 1434 for UDP.
Use WF.msc to create an inbound UCP rule for port 1434.
Use Azure Management Portal to create a UDP endpoint for port 1434
Further research about connecting to named instances revealed dynamic port issues. The reason why we are using port 1435 (static) instead of port 49169 (one of many effective options.)
Instances of SQL Server Express, SQL Server Compact, and named
instances of the Database Engine use dynamic ports. To configure these
instances to use a specific port, see Configure a Server to Listen on
a Specific TCP Port (SQL Server Configuration Manager). and
here.
Done. We went to SQL Configuration Manager > SQL Server Network Configuration > Protocols for SQLEXPRESS > TCP/IP, we did the following.
Protocol Tab > Listen All > NO.
IP Addresses Tab > for each listed address
Enabled > Yes
TCP Dynamic Ports > Blank (delete the zero)
TCP Port > 1435 (or your choice)
After restarting the SQLEXPRESS service, we again looked in the SQL Server Management Studio logs, and found that the Server is Listening on port 1435!!! Hooray!
Testing the Connection
Done. We opened SQL Server Management Studio on our local (non-Azure) computer and connected.
buddha.cloudapp.net,1435 OR buddha.cloudapp.net\SQLEXPRESS
sa
password
Success.
Here are the three web pages on which we found the answer. The most difficult part was setting up static ports for SQLEXPRESS.
Provisioning a SQL Server Virtual Machine on Windows Azure. These initial instructions provided 25% of the answer.
How to Troubleshoot Connecting to the SQL Server Database Engine. Reading this carefully provided another 50% of the answer.
How to configure SQL server to listen on different ports on different IP addresses?. This enabled setting up static ports for named instances (eg SQLEXPRESS.) It took us the final 25% of the way to the answer.
The fact that you're getting an error from the Names Pipes Provider tells us that you're not using the TCP/IP protocol when you're trying to establish the connection. Try adding the "tcp" prefix and specifying the port number:
tcp:name.cloudapp.net,1433
I too struggled with something similar. My guess is your actual problem is connecting to a SQL Express instance running on a different machine. The steps to do this can be summarized as follows:
Ensure SQL Express is configured for SQL Authentication as well as Windows Authentication (the default). You do this via SQL Server Management Studio (SSMS) Server Properties/Security
In SSMS create a new login called "sqlUser", say, with a suitable password, "sql", say. Ensure this new login is set for SQL Authentication, not Windows Authentication. SSMS Server Security/Logins/Properties/General. Also ensure "Enforce password policy" is unchecked
Under Properties/Server Roles ensure this new user has the "sysadmin" role
In SQL Server Configuration Manager SSCM (search for SQLServerManagerxx.msc file in Windows\SysWOW64 if you can't find SSCM) under SQL Server Network Configuration/Protocols for SQLExpress make sure TCP/IP is enabled. You can disable Named Pipes if you want
Right-click protocol TCP/IP and on the IPAddresses tab, ensure every one of the IP addresses is set to Enabled Yes, and TCP Port 1433 (this is the default port for SQL Server)
In Windows Firewall (WF.msc) create two new Inbound Rules - one for SQL Server and another for SQL Browser Service. For SQL Server you need to open TCP Port 1433 (if you are using the default port for SQL Server) and very importantly for the SQL Browser Service you need to open UDP Port 1434. Name these two rules suitably in your firewall
Stop and restart the SQL Server Service using either SSCM or the Services.msc snap-in
In the Services.msc snap-in make sure SQL Browser Service Startup Type is Automatic and then start this service
At this point you should be able to connect remotely, using SQL Authentication, user "sqlUser" password "sql" to the SQL Express instance configured as above. A final tip and easy way to check this out is to create an empty text file with the .UDL extension, say "Test.UDL" on your desktop. Double-clicking to edit this file invokes the Microsoft Data Link Properties dialog with which you can quickly test your remote SQL connection