I am using SIM900A card and currently working on AT commands.
I am trying to get caller number when I am already in another call.
In theory I should get "CLIP+ number", this only works when I am not in communication.
During a call, when someone calls me, I get "RING". I want the number of the second caller..
I got an answer, I thought someone might benefit from it.
I actually used AT+CLCC which show my calls log. From this log I extracted the number using substring.
This document helped me a lot : https://www.usr.cn/Down/Development/USR-GPRS-AT_Commnad_Set_V5.00.pdf
Related
Basically i have these two lines of code written right after each other.:
console.log(typeof (noAdsCallback));
document.write('<sc' + 'ript type="text/javascript">console.log(typeof(noAdsCallback));</scr' + 'ipt>');
The first one logs function, the second logs undefined.
Of course it's a bit trickier than that. So here is the set-up in a nutshell:
I have a so called waterfall of ad-providers. That means, I try to load some Ads, by writing (using document.write) some special tags (given to me by my ad-provider).
If the provider doesn't find an ad for me, they send back a javascript-snippet which looks like this:
if (typeof(window.noAdsCallback) === "function") noAdsCallback();
This function essentially writes the tags of the next provider, which does the same as the first one until I reach the end of the list.
This system actually works fine, doing exactly what I want it to do. Both lines given in the beginning log function.
Except if I use Google as an ad-provider. There is one thing Google does differently, which seems to mess everything up.
In Google, I cannot define a fallback-JavaScript-snippet. All I can do is provide a fallback-url. So this fallback-url (since it's loaded inside an iframe inside an iframe inside...) sends a postMessage to the top, which then calls the same noAdsCallback() method. And this too, works just fine. The message is received and the right method executed. However, already the two lines already give different results, i.e. function and undefined respectively
The next provider then fails to find the noAdsCallback() Method, when it returns, because it uses document.write to try to execute it. Somehow, the context was lost.
First hint: It works fine (i.e. both lines log function) in Chrome, but it doesn't work in FF or IE.
Second hint: It works fine, as long as context never switches, but if communication runs at any point through messaging, it get's confused.
Third hint: Using the fantastic postscribe library as mentioned below, actually solves the problem, but introduces new ones somewhere else.
Fourth hint: Debugging the window.name, before using document.write, gives the correct name, so I'm not in a random iFrame.
Finishing thoughts. I know, i know: DON'T USE DOCUMENT WRITE!! I know that. But since Adproviders use it all the time, I am forced to use it to, otherwise I get this:
Failed to execute 'write' on 'Document': It isn't possible to write into a document from an asynchronously-loaded external script unless it is explicitly opened.
In Fact, right now I'm using postscribe (https://github.com/krux/postscribe) and it works like a charm, except for one lousey provider. And the workauround solution would be, to use document.write only for this lousy provider and postscribe for all the others. But i would really like to find out what the root of the problem is.
Any Ideas, much appreciated.
I think I understood it now. Long story short: DON'T USE DOCUMENT.WRITE :)
Try postscribe, if you have to.
So in hindsight it is quite obvious, because really, anywhere you read about document.write() it says, that write() clears the whole document. And I just didn't get it, because I never saw it happening and every ad is using it, like the whole time. Plus, it seemed to work fine on Chrome. So what's going on??
Well here is what happens. As long as the document is open, which basically means while it is being written, document.write() just appends to the stream, and doesn't clear the document. And as long as I used document.write(), to append foreign ad-scripts (which may and will contain document.write()), the page does not close, hence the document stays open.
This is the reason, why adding Google to my waterfall, posed a problem: Google puts everything in iframes. So the page containing the waterfall model just sees the iframe and says: "well as far as I'm concerned, I'm done" and closes the document, while in fact, Google is still at it.
Afterwards, Google didn't find an ad, sends a postMessage to the main page, causing the next provider to be used. Who then uses document.write() and clears everything.
Everything? Not everything. Remember, it still used to work when I used Chrome? The reason for that is, Chrome just clears the HTML but leaves the Javascript intact. So on Chrome, my Javascript-waterfall worked fine, because all the JS-objects where still in place. All other browsers cleared it.
So that's it. Probably noone's gonna read it, but if you do, USE POSTSCRIBE! Now that I finally really understood document.write() and document.open() and document.close() I'm a big fan.
I am using asterisk 11.9.0 and i want to generate an outgoing call.I found that for outgoing i have to make a .call file and place it in a var/spool/asterisk/outgoing.I am following the link below
http://the-asterisk-book.com/1.6/call-file.html#call-file-parameter
my code is same as given in the above link,the above example uses only single fixed number to call.
My problem is that
i have to generate an outgoing to a number fetched from database(outgoing to new number everytime),so how to write the code of .call file for multiple numbers outgoing and how to pass these numbers fetched from database to .call file from my extensions.conf
Is there any way to do that.
I am new to asterisk.
Any help would be appreciated.
You can use vicidial.org software to do that things.
Note, it is very bad idea do outboudn dialler-like app in asterisk without understanding asterisk logic and very-hi skills in programming/database.
For more info you also can use this page
http://www.voip-info.org/wiki/view/Asterisk+auto-dial+out
Might be easier using WombatDialer as it has a plain API where you can tell it what you want it to do and it will take care of the rest. We have a plain set up for outbound and it took maybe a couple of days from zero to what we have now. ViciDial would have been overkill.
On why rolling your own is not a great idea, the Wombat manual is quite clear: http://manuals.loway.ch/WD_UserManual-chunked/ch01.html#_why_was_wombatdialer_created
You could also use the AMI (Asterisk Manager Interface), would be easier to program with a deamon running in the back to control what gets dialed and the responses to those dials. Mora info here https://wiki.asterisk.org/wiki/pages/viewpage.action?pageId=4817239.
No, not another question that asks, "How can I make my messages flow like on Foursquare???"
What I want to know is, how they are getting their messages in the right order and timeframe.
Here's my situation. I have a proc that can get messages for a given day, and then return the selected result set to the web and have on the front end, my code show them and slide new ones on top. However, these "new" ones, aren't new ones, they are just the ones in the set that didn't initially fit on the page, although they "look new". Now what happens when I get to the end, and the set is empty finally...I make another call right?
Well this call is going to get, yes some ones they didn't see, but also all the ones they already saw.
What's a work around for this?
Thanks.
If you only want to show messages once, then persist the Id of the last message and use that as input into the proc on the second call, basically asking for any messages that came in since the last call.
re: Foursquare, I assume you are referring to the "recent activity" on their main page. They seem to call for 30 activities, then just cycle through them showing 11 at a time. They loop through a static list of 30. No second call that I can see.
I'm running into a strange issue on Vista with the Performance monitoring API. I'm currently using code that worked fine on XP/2k, based around PdhGetFormattedCounterValue(). I start out using PdhExpandWildCardPath to expand the counters (I'm interested in overall network statistics), the counters I'm looking at are:
\\Network Interface(*)\\Bytes Received/sec
\\Network Interface(*)\\Bytes Sent/sec
\\Processor(_Total)\\% Processor Time
The problem is that on their first call they return PDH_INVALID_DATA, I don't think this is a problem, since if I query it again I will start getting data without the error. The problem is this - while the processor time is worked exactly as expected, neither of the network interface counters are returning anything - just 0 all the time. I verified using Perfmon that they are reporting data normally, so I'm at a loss as to what might be the issue. I caught this at MS:
http://support.microsoft.com/?scid=kb%3Ben-us%3B287159&x=11&y=9
But I'm not interested in multi-language for my task, so I don't think this is relevant. I will see if I can come up with some basic code showing exactly what I'm doing, but nothing is returning anything strange, and it worked on XP/2k, so I suspect something changed under the hood. Thanks!
It turns out the issue was that the network interfaces are both wildcards, whereas the Processor one is actually already rolled up by the performance monitoring. What I didn't realize was that it PdhExpandWildCardPath didn't return something directly usable by PdhAddCounter. By this I mean that if ExpandWildCard returns 3 expanded matches, they come back as a null separated strings - I understood this, but I had assumed that AddCounter would be effectively create a counter containing all three. Nope, reality is I needed to break up each path and request it individually from AddCounter, then roll up the results manually when I get them.
Hopefully this helps someone else to avoid the same mistake I made with less frustration. ;)
When you take your first look at an Oracle database, one of the first questions is often "where's the alert log?". Grid Control can tell you, but its often not available in the environment.
I posted some bash and Perl scripts to find and tail the alert log on my blog some time back, and I'm surprised to see that post still getting lots of hits.
The technique used is to lookup background_dump_dest from v$parameter. But I only tested this on Oracle Database 10g.
Is there a better approach than this? And does anyone know if this still works in 11g?
Am sure it will work in 11g, that parameter has been around for a long time.
Seems like the correct way to find it to me.
If the background_dump_dest parameter isn't set, the alert.log will be put in $ORACLE_HOME/RDBMS/trace
Once you've got the log open, I would consider using File::Tail or File::Tail::App to display it as it's being written, rather than sleeping and reading. File::Tail::App is particularly clever, because it will detect the file being rotated and switch, and will remember where you were up to between invocations of your program.
I'd also consider locking your cache file before using it. The race condition may not bother you, but having multiple people try to start your program at once could result in nasty fights over who gets to write to the cache file.
However both of these are nit-picks. My brief glance over your code doesn't reveal any glaring mistakes.