Using trial account, initially I created a reader account and deleted it. After that I am unable to create another reader account and getting the following error. I am not able to contact the support as well. Any help is appreciated.
Number of managed accounts allowed exceeded the limit. Please contact Snowflake support.
As it says, "you need to submit a case to Snowflake support". Could you tell me why you can not connect to the support?
Go to snowflake community:
https://community.snowflake.com/s/
Register and login, and then click "submit a case". Select "I am a 30-day trial user", and validate yourself. Then you should be able to submit a case.
Related
I succesfully added a YubiKey to Snowflake MFA:
Next time I try to login I immediately get following "User is not enrolled in Duo Security. Contact your local system administrator." error:
After inputting my username and password, I expect the site to ask me to touch my YubiKey. Instead I immediately get the error described above.
How can I setup Snowflake MFA using a YubiKey security key?
Our local admin disabled my MFA and I repeated the steps and I got the same result.
Unfortunately this is not available on Snowflake side as of now.
I do agree there is a bit of confusion the fact that you are allowed to enroll with Yubikey but then fail to authenticate.
We do have an internal improvement request pending for this feature. I don't know a timeline yet but you can reach out to your Snowflake representative if you need more information.
Functionality might not be available with Snowflake, you can always enable Single Sign-on with your Identity provider and enable the yubi on the IDP end.
Snowflake has removed that "Security Key" option for all regions to avoid this problem. That option for Snowflake MFA is not supported at the moment
I am trying to obtain my production keys for my QBO app following the steps in this link
here
However, when I try to start the "App Assessment Questionnaire", I get the error message below:
You currently do not have a developer account, please click here to complete setting up your developer account. Once that is complete you will be able to access the help pages.
This is what I see, and I DO have a developer account. It won't let me continue.
Please help!
UPDATE
I see this error in the address bar:
ErrorCode=ERROR_CREATING_USER&ErrorDescription=License+Limit+Exceeded
UPDATE #2
I tried creating a brand new account, a new app, on a different PC and the same thing happened. So this is not a cache issue.
UPDATE #3
Created 2 support tickets for this issue
#00114423
#00114415
I had to use a different account to access the help site
https://help.developer.intuit.com
I've the same issue since Friday (02/18) and spent hours to figure out what's the problem.
tried from different browsers and different IP addresses
made a brand new developer account to test with it
had a 1+ hour chat session with QB support (but not developer support)
sent an email to an address received from the chat assistant
sent a feedback at https://www.surveymonkey.com/r/AppAssess
According to the browser's developer tools:
the Start questionnaire button opens this URL:
https://developers.intuit.com/app/developer/appdetail/prod/questionnaire?appId=xxxxx:UUID_of_app
then it redirects to:
https://login.salesforce.com/services/auth/sso/yyyyyyyyyyy/Intuit_Enterprise?community=https://help.developer.intuit.com
finally, SSO to salesforce fails and it redirects back to:
https://developer.intuit.com/app/developer/qbpayments/docs/qbms-payments/hosted-paypage/faqs/help-redirect?**ErrorCode=ERROR_CREATING_USER&ErrorDescription=License+Limit+Exceeded**+-+Customer+Community+Login&ProviderId=xxxxxx&startURL=%2Fs%2Fquestionnaire%3Fapp%yyyyyyyyyyyyy
So, it seems to be, QB have reached a license limit at salesforce, which prevents new logins to create and the questionnaire from to load.
And the funny part is: the same thing happens, when I tried to create a support ticket and used the "Ask a question" button at https://help.developer.intuit.com/s/
Which means, I can't start the questionnaire and can't start a ticket about the error either.
I guess, if QB developer accounts whom created support tickets previously or started the questionnarie before the license limit has been reached, they have have a SSO login account at salesforce and able to fill in the form or start new support tickets, but others are stuck because of the license limit.
If somebody have a working QB developer account and able to start a support ticket, please do it, and link this page in it.
Or maybe, we should contact salesforce support to let QB know about the license limit.
I'll give it a try.
This seems to have been fixed. I tried running the questionaire and it worked.
I have also been having this problem the last several days and had the same lack of success with QB support. The URL callback error I see is:
ErrorCode=REGISTRATION_HANDLER_ERROR&ErrorDescription=Please+sign+the+terms+of+service+before+you+login+to+community
I don't see anywhere I can sign a TOS in my account page - it's possible that in fact QBO hasn't signed a TOS with Salesforce. What a joke.
When using the graph explorer I am able to get results from some of the API's. However not able to get when requesting for reports
For Example, this works perfectly fine;
https://graph.microsoft.com/v1.0/users
However, calling the below report related request results in an error "We do not recognize this tenant ID ... Please double-check the tenant ID and try again." I am facing this issue for any such call for reports.
https://graph.microsoft.com/v1.0/reports/getOffice365ActiveUserDetail(period='D90')
Is there some issue with App Registration which is causing this? The error message for checking the TenantID is totally misleading as the token is same in both the cases and I am not doing anything different between the two calls. Would appreciate any guidance.
Try checking these.
Try the request after giving some time like 48 hrs approximately as
it might take a little time for the tenant id to propagate across all
the instances and reflect in Microsoft graph api.
Check if you have given valid tenant ID
check tenant expiration (as admin account)
Else check if required permissions are set.
Reports.Read.All permission is needed to call this API.Refer Microsoft
Graph permissions
Please add the Delegated permisson /the Application permission and test it again. See Microsoft Graph v1.0 | Microsoft Docs
If that’s done already check if admin consent is provided .
( Reports.Read.All permission allows an app to read all service
usage reports without a signed-in user. Make sure to check if you
granted the permission(by clicking Grant Permissions from admin
account).
See reports-permissions
References:
Similar thread
concept-reporting-api
Update:
This error may occur when the usage report is not ready .Because if
the tenant is new , it might take sometime( upto 48 hours) for
the report service to pick it up and start generating reports.
You must be able to test it manually from O365 Admin
Portal.Portal.office.com -> Admin Tab -> Show all -> Reports ->
Usage
Other wise , you may contact support to raise a request.
While trying to access online meeting in order to get the start and end time of the meetings.i am getting below error.
Any help is highly appreciated. Thanks
Note : I am able to create the meeting and access it but I want to record the meeting start and end time too.Sometimes the error is ID is malformed althrough I am using the meeting ID returned from the Graph only which is being created.
Please try /me/onlineMeetings/{meetingId}.
Microsoft Graph Explorer users Delegated permission, which mainly takes effect on /me endpoint. If you want to use /users/{userId}/onlineMeetings/{meetingId} , make sure /users/{userId} is the current signed-in user.
Please don't query the online meeting of other users. It is only supported by Application permission.
The required Delegated permissions are OnlineMeetings.Read, OnlineMeetings.ReadWrite.
You can add them like this:
Writing this post because I could not locate much content on troubleshooting specifically for connecting a Salesforce Sandbox as a connected Zapier account.
First troubleshoot issue is that you must select that you wish to connect to a sandbox account from the "advanced options" feature by doing as follows
1) From Zapier dashboard, nagivate to "Connected Accounts"
2) use the search bar with text "add new account", to find Salesforce, selecting this will open a pop-up, you must select "advanced options" and then select "sandbox, instead of production.
Secondly, I had an issue with Privilege error and could not locate a soluton on the forums. Here was my solution -
1) Zapier would constantly default to connecting to an old sandbox. To cause Zapier to allow me the option of selecting a new sandbox, I had to log out of both, Zapier and all Salesforce sandboxes and Productions.
2) Once I logged onto the desired sandbox, I had an error stating I did not have the privileges to perform my requested action, despite being an admin. It turned out the new custom objects I had made in Sandbox did not have any users down as having read/write authorization and even though it was only two custom objects, this was enough to trigger a rejection for the whole Zapier-Sandbox account linking. I made a permission set for the new objects, assigned them to all users and allowed all read/write access (note, use more appropriate security settings for your organisation). This finally fixed the issue and I could now test zaps on my Sandbox.
First troubleshoot issue is that you must select that you wish to connect to a sandbox account from the "advanced options" feature by doing as follows
1) From Zapier dashboard, nagivate to "Connected Accounts" 2) use the search bar with text "add new account", to find Salesforce, selecting this will open a pop-up, you must select "advanced options" and then select "sandbox, instead of production.
Secondly, I had an issue with Privilege error and could not locate a soluton on the forums. Here was my solution -
1) Zapier would constantly default to connecting to an old sandbox. To cause Zapier to allow me the option of selecting a new sandbox, I had to log out of both, Zapier and all Salesforce sandboxes and Productions.
2) Once I logged onto the desired sandbox, I had an error stating I did not have the privileges to perform my requested action, despite being an admin. It turned out the new custom objects I had made in Sandbox did not have any users down as having read/write authorization and even though it was only two custom objects, this was enough to trigger a rejection for the whole Zapier-Sandbox account linking. I made a permission set for the new objects, assigned them to all users and allowed all read/write access (note, use more appropriate security settings for your organisation). This finally fixed the issue and I could now test zaps on my Sandbox.