I'm trying to run my wpf service with nssm service manager. The problem is that using nssm I can install service, but then when I try to start it I get the following response in terminal:
MyService: Unexpected status SERVICE_PAUSED in response to START control.
Then in EventViewer I get the following error:
Service cannot be started. The service process could not connect to the service controller
Although I can start my service using NET commands, or using VisualStudio, but this problem occurs only with nssm...
Framework:
.NET Framework 4.6.1
Any suggestions on how to fix this issue?
EDIT 1
I created sample WPF service using https://learn.microsoft.com/en-us/dotnet/framework/windows-services/walkthrough-creating-a-windows-service-application-in-the-component-designer example. And the result is still the same.
EDIT 2
I managed to get NSSM error:
Cannot start service from the command line or a debugger. A Windows Service must first be installed (using installutil.exe) and then started with the ServerExplorer, Windows Services Administrative tool or the NET START command.
I don't get how nssm works now....
I found an answer!
I was too dumb to realize that nssm is a service manager, and I tried to run with it a windows service...
All I needed to do is to make a simple console application instead of service...
You can try to make NET COMMANDS to a bat file. Then Use NSSM to make the bat file to service.
Related
An error occurred during installation: No such plugin: cloudbees-folder (While installing Jenkins suggested plugins getting the error on windows 10)
This work for me:
http://localhost:8080/restart
OR
service jenkins restart on my Ubuntu
For Windows users, restarting the Jenkins service will resolve the issue.
For that Open Task Manager (Ctrl+Sft+Esc) -> Services -> right-click on Jenkins service and choose the option restart
If you are using the Jenkin's image in Docker if you see this error just try to execute the below command:
http://localhost:8080/safeRestart
you will get a prompt do you need to restart don't click on yes just ignore then start creating your jobs by clicking on NEW, it's just a plugin
For the docker version
1-open the browser
2- write your_ip_address:your_docker_port/restart
Note: you must have the password generated by your Jenkins server
if you do have click here
As a comment suggested: always look for official images mentioned here jenkins.io/download.
I faced the same issue when using the docker image jenkins:2.60.3, it turned out that this image isn't an official one, the official images look like jenkins/jenkins:<something>, you can find them here: https://hub.docker.com/r/jenkins/jenkins
If you are behind a firewall (local or through a VPN), there's a good chance that it's failing to download files correctly.
Try installing from another location or disabling the VPN.
Or request your network admin to allow the connections.
When I initially started my server while on a VPN there were two connection failure stack traces.
I am running Jenkins on Ubuntu in AWS.
I had this initial problem after booting up the box.
Ran the following:
sudo service jenkins restart
All working for me now.
Check the Context Path in tomcat for Jenkins that you have given during deployment and then restart/safeRestart from that path.
For example: The Path in the below screenshot is "/jenkins", So the restart URL will be
http://localhost:8080/jenkins/restart OR
http://localhost:8080/jenkins/safeRestart
I just Unchecked all the plugins and clicked on the install button. After that, it successfully takes me to the inside.
Just restart the machine. It successfully worked for me.
Does anybody work with Tosca and Jenkins?
I have problems to run my batch script from Jenkins. It does not open browser, but job is finished successfully. Batch script runs normally when I try to run in on Windows, without Jenkins.
Anybody has an experience using these two tools together?
In order to use Tosca CI with Jenkins you need to:
Configure your Jenkins build project
Add an additional build step (Execute Windows batch command)
Call ToscaCIClient.exe/ToscaCIClient.jar with parameters
e.g. "PathToTosca\ToscaCI\Client\ToscaCIClient.exe" -t junit -r PathToResults\result.xml
Further information can be found here: https://support.tricentis.com/community/article.do?number=KB0012411
The issue your facing is because your running Jenkins as windows service, in this case headless execution happens technically your script is executed for other user account.
Solution
Instead of installing Jenkins host it on Apache Tomcat server
Download Jenkins war file
Copy it inside webapps folder of Tomcat
Run startup.bat
Refer-
https://www.tutorialspoint.com/jenkins/jenkins_tomcat_setup.htm
I had faced the same issue.
I am guessing your slave machine running the test has jenkins services installed as services.
Uninstall the service. (.jenkins/jenkins-slave.exe uninstall)
Use the .jnlp or slave.jar to connect the machine as a slave.
Your test should run fine after that.
If it does just create a batch file to connect the machine as slave whenever it is logged in.
I tried that. But in any case, Jenkins does not open the browser, so Tests from Execution List and I do not know why.
We use Tosca 10.
So I need to run a custom server. It worked on other machines, but not on mine (all of them are on Windows).
My input:
nssm start custom-server
Error message:
custom-server: Unexpected status SERVICE_PAUSED in response to START control.
I tried to re-start it, but got the same message.
Use the following instructions to change I/O redirects:
nssm set [SERVICE_NAME] AppStdout [APP_PATH_INSTALL]\logs\service.log
nssm set [SERVICE_NAME] AppStderr [APP_PATH_INSTALL]\logs\service-error.log
Check the service log files to find the failure.
In my case, the failure was caused by a dependency on Python libraries.
As Garric15 states it is probably your install command.
This could be for example a StdOut redirect to a path / file that does not exist on your local machine.
Look in the Application event log for errors where the source is nssm around the time you installed the service.
The reason is because firewall is blocking the software which you are running as a service, start first software separately, it will ask you to add to firewall exclusions , then you can use it via nssm
Some scenario
App directory not provided or doesn't exist
nssm nssm set xyz-service AppDirectory "D:\Work\ShoppingKart"
File which is given for service may be corrupted (rebuild code)
The application trying to run is not proper or corrupted. Try to run without windows service once.
Program (.exe) file path not found (in this case look for the solution, or else give full path, if java not found even if it is there in env, just add full path)
I solved it by using no mws (Managed Windows Service?) release,
ex.
gogs_0.12.10_windows_amd64 works
gogs_0.12.10_windows_amd64_mws not working
The issue for me was there had been a Java update on my machine. The JAVA_HOME environment variable was now pointing to an invalid directory (i.e. the old Java version). Just needed to update the JAVA_HOME path and restart the solr services to fix it.
I was attempting to configure rclone as a windows 10 service. I fixed it including the rclone.conf archive inside the rclone folder.
In my case, the problem was that after the service was installed using nssm.exe, the program name was changed. This caused service to always go to paused state after start or restart the service, using either services.msc or nssm.exe command line.
Editing service nssm.exe startup parameters solved the problem for me.
I have few Ordered tests which I execute locally using the VSTEST.CONSOLE.EXE In a batch file. I want to launch this batch file from remote system on about 15 VMs. I have the desktop active on all the VMs and user under which these test cases need to be executed are also same as the user logged in. When I try to execute the batch file using the PSExec it throws an error and dosent launch the tests the error shown is as below
C:\TestRunningFolder>vstest.console.exe C:\BuildsFolder\BVTTests.orderedtest /Settings:C:\BuildsFolder\QuestCodedUI.testsettings /Logger:trx
Microsoft (R) Test Execution Command Line Tool Version 12.0.30723.0
Copyright (c) Microsoft Corporation. All rights reserved.
starting test execution, please wait...
Warning: Warning: Test Run deployment issue: The assembly or module 'UiaComWrapp
r' directly or indirectly referenced by the test container 'c:\BuildsFolder\questcodedui.dll' was not found.Error: Test host process
exited unexpectedly.
Error: Failed to queue test run 'testuser#RemoteMachine 2015-05-14 15:57:49':
Unable to start the agent process.
Please let me know how can I execute the CodedUI tests on remote machine without using the TestAgent/Controller. Is it possible Via WMI ?. Anyone tried and succeeded please let me know.
Update : I was able to get past this issue by copying the required files in the folder. Now I am trying to launch the CodedUI tests using the PSExec.exe on remote system. I have remote desktop active and when I try to launch the batch file using the command line and it just gives me a message as shown below. PSEXEC.EXE \RemoteMachinename -i "c\users\testuser\desktop\Runtests.bat" when I do that it returns with error code 1 and tests are not started yet. I tried searching for solution I couldn't find anything that is usefull.
For the above mentioned scenario, please copy all the dependency dll (eg : Microsoft.Visualstudio.Qualitytools.CodeduiTest etc.) to the folder where your build dll (projectname.dll) file is copied. Make sure that you are using correct version of vstest that supports the version of the VS you are using. For example, if your code is builded using VS 2015, you have to use vstest.console.exe that comes with Test Agent 2015/Test Agent 2013 Update 5. This trick worked for me. Please let me know whether this works for you. Regards.
I am trying to install the latest GCC compiler on windows 7 by using "Win-builds Project". Since the company I am working for has proxy. When I run the command win-install.bat. I got an error:
http://win-builds.org/1.3.0/packages/windows_64/package_list.el:
2014-02-21 11:39:44 ERROR 407: Proxy Authentication Required.
In the batch file, I found code:
yypkg -init
yypkg -config -setpreds host=%_YY_ARCH%-w64-mingw32
yypkg -config -setpreds target=%_YY_ARCH%-w64-mingw32
sherpa -set-mirror http://win-builds.org/1.3.0/packages/windows_%_YY_BITS%
I think the yypkg.exe does the initialization work and configs sherpa and let sherpa.exe to download and install files.
My question is how can config yypkg my username and password? I did google search, but I cannot find any info about yypkg nor how to config sherpa.
[enter code here][1]Proxy set up can be done via command line
How can I set a proxy server for gem?
set http_proxy=http://your_proxy:your_port
set http_proxy=http://username:password#your_proxy:your_port
set https_proxy=https://your_proxy:your_port
set https_proxy=https://username:password#your_proxy:your_port
These command snippets need to be entered on 'cmd.exe', and before running the wget, to download files manually via portable wget as described on page:
http://win-builds.org/doku.php/download_and_installation_from_windows
few IMPORTANT Pointers, after the packages have been downloaded manually, and running the 'yypkg-1.5.0.exe'
At first the Application UI is unresponsive, DO NOT CLOSE IT
After some time, change mirror dialog appears where you would need to type/paste the Local folders location(this is the folder where files were downloaded manually)
Local folder path needs to be similar to the following where 'package_list.el.tar.xz' file resides.
file:///C:/usr/MinGW/1.5.0/packages/windows_64
after that all works fine