I am trying to install the latest GCC compiler on windows 7 by using "Win-builds Project". Since the company I am working for has proxy. When I run the command win-install.bat. I got an error:
http://win-builds.org/1.3.0/packages/windows_64/package_list.el:
2014-02-21 11:39:44 ERROR 407: Proxy Authentication Required.
In the batch file, I found code:
yypkg -init
yypkg -config -setpreds host=%_YY_ARCH%-w64-mingw32
yypkg -config -setpreds target=%_YY_ARCH%-w64-mingw32
sherpa -set-mirror http://win-builds.org/1.3.0/packages/windows_%_YY_BITS%
I think the yypkg.exe does the initialization work and configs sherpa and let sherpa.exe to download and install files.
My question is how can config yypkg my username and password? I did google search, but I cannot find any info about yypkg nor how to config sherpa.
[enter code here][1]Proxy set up can be done via command line
How can I set a proxy server for gem?
set http_proxy=http://your_proxy:your_port
set http_proxy=http://username:password#your_proxy:your_port
set https_proxy=https://your_proxy:your_port
set https_proxy=https://username:password#your_proxy:your_port
These command snippets need to be entered on 'cmd.exe', and before running the wget, to download files manually via portable wget as described on page:
http://win-builds.org/doku.php/download_and_installation_from_windows
few IMPORTANT Pointers, after the packages have been downloaded manually, and running the 'yypkg-1.5.0.exe'
At first the Application UI is unresponsive, DO NOT CLOSE IT
After some time, change mirror dialog appears where you would need to type/paste the Local folders location(this is the folder where files were downloaded manually)
Local folder path needs to be similar to the following where 'package_list.el.tar.xz' file resides.
file:///C:/usr/MinGW/1.5.0/packages/windows_64
after that all works fine
Related
I'd like to schedule a KNIME workflow. The workflow does its job very good as long as I start it from the KNIME GUI application. When I execute the same workflow via command line, java complains that com.microsoft.sqlserver.jdbc.SQLServerDriver
could not be found (ClassNotFoundException).
I invoke it via:
"D:\Progamme\KNIME\knime.exe" -nosplash -application -consoleLog org.knime.product.KNIME_BATCH_APPLICATION -preferences="absolutepathto\preferences.epf" -workflowDir="absolutepathto\workflow"
Since the error message signals missing content in the java CLASSPATH I also tried to add the parameters
-vmargs -classpath .;"absolutepathto/sqljdbc42.jar"
But still I earn a java slap, pointing to the same error...
I also tried to run the command from within the knime.exe's directory and I also tried to add the JAR file to Preferences -> Java -> Build Path -> Classpath Variable / User Libraries (referenced via the -preference argument). But that had no effect.
Did anybody face the same problems? Maybe with other third party JARs?
It is all about a Database connector that is configured like this:
Does the integrated security maybe force a misleading error?
System spec: KNIME 3.2.2 on Windows Server 2008 R2
Update - extract from preferences file
/configuration/org.eclipse.core.net/org.eclipse.core.net.hasMigrated=true
/configuration/org.eclipse.ui.ide/MAX_RECENT_WORKSPACES=10
/configuration/org.eclipse.ui.ide/RECENT_WORKSPACES=<list of some workspaces>
/configuration/org.eclipse.ui.ide/RECENT_WORKSPACES_PROTOCOL=3
/configuration/org.eclipse.ui.ide/SHOW_RECENT_WORKSPACES=false
/configuration/org.eclipse.ui.ide/SHOW_WORKSPACE_SELECTION_DIALOG=true
Is there maybe a problem due to the fact that it is a shared KNIME instance among several users and the command line execution does not know which workspace has to be chosen? Is the workspace somehow needed and why?
Partial Solution:
I finally managed it but I don't know exactly why it works now. What I did was to load a fresh portable version of KNIME and ran the same commands only changing the executable path to the new portable version. Before that I started the portable version once to set the workspace directory and register the database driver in preferences dialog and .ini file, nothing else, same configuration so far as the shared KNIME instance. What I am really wondering abpout is that from now on the commands are also working with the shared KNIME instance. I really don't know what caused the change that let KNIME find the driver class.
Info
Because I encountered a few more problems within shared environment in KNIME command line mode, that led to undeterministic execution results, I wrote a little .NET library. This gives me more flexibility/control over the workflow execution (which returncodes and error messages occured and so on). You can find it here if you're interested: KnimeNet
I took a very minimal approach:
cd "C:\Program Files\KNIME"
.\knime -nosplash -noexit -consoleLog -reset -application org.knime.product.KNIME_BATCH_APPLICATION -workflowFile="D:\Work\Knime Workflows\Output\CMD_Test.knwf" -preferences="D:\Work\Knime Workflows\Output\CMD_Test.epf"
So I need to run a custom server. It worked on other machines, but not on mine (all of them are on Windows).
My input:
nssm start custom-server
Error message:
custom-server: Unexpected status SERVICE_PAUSED in response to START control.
I tried to re-start it, but got the same message.
Use the following instructions to change I/O redirects:
nssm set [SERVICE_NAME] AppStdout [APP_PATH_INSTALL]\logs\service.log
nssm set [SERVICE_NAME] AppStderr [APP_PATH_INSTALL]\logs\service-error.log
Check the service log files to find the failure.
In my case, the failure was caused by a dependency on Python libraries.
As Garric15 states it is probably your install command.
This could be for example a StdOut redirect to a path / file that does not exist on your local machine.
Look in the Application event log for errors where the source is nssm around the time you installed the service.
The reason is because firewall is blocking the software which you are running as a service, start first software separately, it will ask you to add to firewall exclusions , then you can use it via nssm
Some scenario
App directory not provided or doesn't exist
nssm nssm set xyz-service AppDirectory "D:\Work\ShoppingKart"
File which is given for service may be corrupted (rebuild code)
The application trying to run is not proper or corrupted. Try to run without windows service once.
Program (.exe) file path not found (in this case look for the solution, or else give full path, if java not found even if it is there in env, just add full path)
I solved it by using no mws (Managed Windows Service?) release,
ex.
gogs_0.12.10_windows_amd64 works
gogs_0.12.10_windows_amd64_mws not working
The issue for me was there had been a Java update on my machine. The JAVA_HOME environment variable was now pointing to an invalid directory (i.e. the old Java version). Just needed to update the JAVA_HOME path and restart the solr services to fix it.
I was attempting to configure rclone as a windows 10 service. I fixed it including the rclone.conf archive inside the rclone folder.
In my case, the problem was that after the service was installed using nssm.exe, the program name was changed. This caused service to always go to paused state after start or restart the service, using either services.msc or nssm.exe command line.
Editing service nssm.exe startup parameters solved the problem for me.
I got a Mesosphere-EE, and install on fedora 23 server (kernel 4.4)with:
$bash dcos_generate_config.ee.sh --web –v
then output:
Running mesosphere/dcos-genconf docker with BUILD_DIR set to/home/mesos-ee/genconf
Usage of loopback devices is strongly discouraged for production use.Either use `--storage-opt dm.thinpooldev` or use `--storage-opt
dm.no_warn_on_loop_devices=true` to suppress this warning.
07:53:46:: Logger set to DEBUG
07:53:46:: ====> Starting DCOS installer in web mode
07:53:46:: DCOS Installer v1
07:53:46:: Starting server ('0.0.0.0', 9000)
Then I start firefox though vnc, the vnc is on root. then:
07:53:57:: Root page requested. 07:53:57:: Serving/usr/local/lib/python3.4/site-packages/dcos_installer/templates/index.html
07:53:58:: Request for configuration type made.
07:53:58::Configuration file not found, /genconf/config.yaml. Writing new onewith all defaults.
07:53:58:: Error handling request
PermissionError: [Errno 13] Permission denied: '/genconf/config.yaml'
But I already have a genconf/config.yaml, it look like:
bootstrap_url: http://<bootstrap_public_ip>:<your_port>
cluster_name: '<cluster-name>'
exhibitor_storage_backend: zookeeper
exhibitor_zk_hosts: <host1>:2181,<host2>:2181,<host3>:2181
exhibitor_zk_path: /dcos
master_discovery: static
master_list:
- <master-private-ip-1>
- <master-private-ip-2>
- <master-private-ip-3>
superuser_username: <username>
superuser_password_hash: <hashed-password>
resolvers:
- 8.8.8.8
- 8.8.4.4
I do not know what’s going on. If you have any idear, please let me know, thank you very much!
Disable Selinux!
Configure SELINUX=disabled in the /etc/selinux/config file and then reboot!
Be ensure the selinux is disabled by the command getenforce.
$ getenforce
Disabled
zhe.
Correctly installing the enterprise edition depends on the correct system prerequisites. Anyway I suppose you're still on the bootstrap node so I will give you some path to succed in your current task.
Run the script as root or as a user issuing sudo dcos_generate_config.ee.sh
The script will also generate the config file automatically; if you want to use your own configuration file then create a folder named genconf and put it inside before running the script. You should changes the values inside <> with your specific configuration. If you need more help for your specific case send me an email to infofs2 at gmail.com
I'm working through a test GAE Java project which was working fine but I decided to look at adding GWT to the same project. I then decided to stick with the GAE stuff I was learning and decided to remove GWT. The problem is I can't now deploy to the development server as it gives the following in the Eclipse console pane. Anyone know please how I can reset appropriate settings to how my project had them originally?
terminated test [Web Application] C:\Program
Files\Java\jdk1.6.0_37\bin\javaw.exe Usage:
[options]
Options: --help, -h Show this help message and exit.
--server=SERVER The server to use to determine the latest -s SERVER SDK version. --address=ADDRESS The address of the interface on the local machine -a ADDRESS
to bind to (or 0.0.0.0 for all interfaces). --port=PORT
The port number to bind to on the local machine. -p PORT
--sdk_root=DIR Overrides where the SDK is located. --disable_update_check Disable the check for newer SDK versions. --generated_dir=DIR Set the directory where generated files are created. --jvm_flag=FLAG Pass FLAG as a JVM argument. May
be repeated to
supply multiple flags.
I seem to have found my own answer through setting up a new dummy gae project and having a poke around, found that the 'Run As' > 'Run Configurations...' > '(x)= Arguments' > 'Program arguments' had an additional port defined prior to the rest of the argument beginning '--port=8888'. I removed the mention of '-codeServerPort 9997 ' and it now deploys to dev server and appears to be working as before.
eg
new dummy project: --port=8888 "C:\Users\tech1\SSD Storage\Eclipse Projects\workspace\dummy\war"
project that wouldn't deploy to dev server: -codeServerPort 9997 --port=8888 "C:\Users\tech1\SSD Storage\Eclipse Projects\workspace\test\war"
I faced the same issue and you know what, Workaround is just pretty simple.
I created one new appengine project with only one jsp in WAR and 'Run As' > 'Run Configurations...' >Server Tab -> Unchecked then checked Run Built-In server and then checked Automatically select any port.
Server started ..on some fishy 25334 port..i stopped that using red button on Console Terminal.
then i changed it back to 8888 and WHOA project Ran.... :)
Then i did the same with old project. deleted this new one and all is working as expected.
I am using WAMP on my local machine and I'm trying to use docblox to generate documentation for a project.
When i try to run the docblox command in my command prompt for a file that has the necessary comments, I get the error message.
C:\wamp\www\wm-ppclps>docblox run -f wm-ppclps.php -t documentation
DocBlox version 0.18.1
Starting transformation of files (this could take a while depending upon the size of your project)
ERROR: The XSL writer was unable to find your XSLTProcessor; please check if you
have installed the PHP XSL extension
I have no idea why this is error message is appearing. The command creates the documentation folder, parses the source code and it produces the structure.xml file. It just won't transform the structure into an HTML file or any other readable file.
I added the PHP install directory to my system path, I installed PEAR system wide, added PEAR install directory to my system path, installed DocBlox using the docblox pear channel, I have the necessary environment variables setup. I uncommented the php.ini line to enable the php_xsl.dll extension for WAMP and restarted WAMP. When I view the phpinfo, i see that the XSL extension is enabled (XSL version 1.1.23, compiled against libxml version 2.6.32, EXSLT enabled).
Does anyone have any idea why this is happening, has come across this problem or can point me in the right direction for an answer?
The error that you are receiving means that php does not recognize the xsl extension.
Php has got a separate ini file for CLI and web; and I presume that you have enabled the xsl extension for apache only.
You can verify this by executing php -i in your command prompt and check if the xsl extension is enabled there. If not then add your dll to the right config for your WAMP.