I am using WAMP on my local machine and I'm trying to use docblox to generate documentation for a project.
When i try to run the docblox command in my command prompt for a file that has the necessary comments, I get the error message.
C:\wamp\www\wm-ppclps>docblox run -f wm-ppclps.php -t documentation
DocBlox version 0.18.1
Starting transformation of files (this could take a while depending upon the size of your project)
ERROR: The XSL writer was unable to find your XSLTProcessor; please check if you
have installed the PHP XSL extension
I have no idea why this is error message is appearing. The command creates the documentation folder, parses the source code and it produces the structure.xml file. It just won't transform the structure into an HTML file or any other readable file.
I added the PHP install directory to my system path, I installed PEAR system wide, added PEAR install directory to my system path, installed DocBlox using the docblox pear channel, I have the necessary environment variables setup. I uncommented the php.ini line to enable the php_xsl.dll extension for WAMP and restarted WAMP. When I view the phpinfo, i see that the XSL extension is enabled (XSL version 1.1.23, compiled against libxml version 2.6.32, EXSLT enabled).
Does anyone have any idea why this is happening, has come across this problem or can point me in the right direction for an answer?
The error that you are receiving means that php does not recognize the xsl extension.
Php has got a separate ini file for CLI and web; and I presume that you have enabled the xsl extension for apache only.
You can verify this by executing php -i in your command prompt and check if the xsl extension is enabled there. If not then add your dll to the right config for your WAMP.
Related
While i'm trying to start apache2, error occures:
Syntax error on line 146 of /etc/apache2/apache2.conf:
Syntax error on line 1 of /etc/apache2/mods-enabled/server.load:
Cannot load /opt/dfplatform/bin/mod_server.so into server:
libjsoncpp.so.1: cannot open shared file: No such file or directory
So apache cannot see jsoncpp library, despite it stored in /usr/lib/x86_64-linux-gnu directory, along with other libraries, which apache perfectly finds. Both apache2 and library installed via apt install recently, so it must be fresh versions.
Why does apache don't want to see this specific library? Is it really something about versions and I must install older apache2/libjsoncpp?
I attempted to install the Traffic library for the book "A Touch of Class" but was not able to compile the examples. EiffelStudio complained about a base2.ecf file.
Error code: VD00
General configuration parsing error.
What to do: fix the configuration file.
Could not open file: \base2.ecf
$EIFFELBASE2\base2.ecf
base2.ecf is found in where Windows installed Eiffel: C:\Program Files\Eiffel Software\EiffelStudio 18.11 GPL\unstable\library\base2.ecf The offending line of code seems to be this in the Traffic configuration files:
I have attempted to change this configuration file pointing directly to where the file is, using the actual path, to no avail.
Setting the variable EIFFELBASE2 might help:
set "EIFFELBASE2=C:\Program Files\Eiffel Software\EiffelStudio 18.11 GPL\unstable\library"
Then, EiffelStudio should be started from the environment where the variable is set.
(However, I wonder if this is the library to be used with the examples, or if there is another one that comes together with the examples.)
I'd like to schedule a KNIME workflow. The workflow does its job very good as long as I start it from the KNIME GUI application. When I execute the same workflow via command line, java complains that com.microsoft.sqlserver.jdbc.SQLServerDriver
could not be found (ClassNotFoundException).
I invoke it via:
"D:\Progamme\KNIME\knime.exe" -nosplash -application -consoleLog org.knime.product.KNIME_BATCH_APPLICATION -preferences="absolutepathto\preferences.epf" -workflowDir="absolutepathto\workflow"
Since the error message signals missing content in the java CLASSPATH I also tried to add the parameters
-vmargs -classpath .;"absolutepathto/sqljdbc42.jar"
But still I earn a java slap, pointing to the same error...
I also tried to run the command from within the knime.exe's directory and I also tried to add the JAR file to Preferences -> Java -> Build Path -> Classpath Variable / User Libraries (referenced via the -preference argument). But that had no effect.
Did anybody face the same problems? Maybe with other third party JARs?
It is all about a Database connector that is configured like this:
Does the integrated security maybe force a misleading error?
System spec: KNIME 3.2.2 on Windows Server 2008 R2
Update - extract from preferences file
/configuration/org.eclipse.core.net/org.eclipse.core.net.hasMigrated=true
/configuration/org.eclipse.ui.ide/MAX_RECENT_WORKSPACES=10
/configuration/org.eclipse.ui.ide/RECENT_WORKSPACES=<list of some workspaces>
/configuration/org.eclipse.ui.ide/RECENT_WORKSPACES_PROTOCOL=3
/configuration/org.eclipse.ui.ide/SHOW_RECENT_WORKSPACES=false
/configuration/org.eclipse.ui.ide/SHOW_WORKSPACE_SELECTION_DIALOG=true
Is there maybe a problem due to the fact that it is a shared KNIME instance among several users and the command line execution does not know which workspace has to be chosen? Is the workspace somehow needed and why?
Partial Solution:
I finally managed it but I don't know exactly why it works now. What I did was to load a fresh portable version of KNIME and ran the same commands only changing the executable path to the new portable version. Before that I started the portable version once to set the workspace directory and register the database driver in preferences dialog and .ini file, nothing else, same configuration so far as the shared KNIME instance. What I am really wondering abpout is that from now on the commands are also working with the shared KNIME instance. I really don't know what caused the change that let KNIME find the driver class.
Info
Because I encountered a few more problems within shared environment in KNIME command line mode, that led to undeterministic execution results, I wrote a little .NET library. This gives me more flexibility/control over the workflow execution (which returncodes and error messages occured and so on). You can find it here if you're interested: KnimeNet
I took a very minimal approach:
cd "C:\Program Files\KNIME"
.\knime -nosplash -noexit -consoleLog -reset -application org.knime.product.KNIME_BATCH_APPLICATION -workflowFile="D:\Work\Knime Workflows\Output\CMD_Test.knwf" -preferences="D:\Work\Knime Workflows\Output\CMD_Test.epf"
I am using custom Nagios plugins for the first time and am running into this error when I create a service for the plugin.
(No output on stdout) stderr: execvp(/usr/local/nagios/libexec/check_load.py, ...) failed. errno is 2: No such file or directory
The plugin works when I run it on the command line, however does not work when it runs within Nagios.
I followed these steps to get the plugin into Nagios
https://assets.nagios.com/downloads/nagiosxi/docs/Managing-Plugins-in-Nagios-XI.pdf
Here is what it looks like in the Nagios UI
The plugin is in the correct path: /usr/local/nagios/libexec and the resource.cfg file has the same path within it.
I tried two separate plugins, both which work on the command line, and the result is the same error.
The error indicates the file location is incorrect, however the plugin is in the specified directory and runs with no errors within that directory.
I am totally stumped and appreciate any help.
For anyone reading this, I solved the problem.
The first time I added the plugin, I forgot to add the python extension. When I updated the already created plugin, Nagios still threw the error.
Once I completely deleted the plugin and re-created it the 'file not found', error went away.
I faced a similar issue when I was trying to add a custom plugin ( I had custom plugins in ruby and python ).
The issue was the missing shebang line at the start of the script (which determines the script's ability to be executed like a standalone executable).
For example, if you have a python plugin custom-plugin.py then make sure this script has shebang at the start of script #!/usr/bin/env python3. Also if you have other scripts (ruby, bash etc.) make sure to add the appropriate path at the start of your scripts.
Also, check the path for plugins Nagios version. For my setup path was /usr/local/nagios/libexec/ and make sure your custom plugin is executable and has correct ownership permissions.
Sample custom template I used :
define command {
command_name check_switch_health
command_line /usr/local/nagios/libexec/check_snmp.rb --host $HOSTADDRESS$ --model "$ARG1$" --community "$ARG2$"
}
The above workaround worked for me.
I am trying to install the latest GCC compiler on windows 7 by using "Win-builds Project". Since the company I am working for has proxy. When I run the command win-install.bat. I got an error:
http://win-builds.org/1.3.0/packages/windows_64/package_list.el:
2014-02-21 11:39:44 ERROR 407: Proxy Authentication Required.
In the batch file, I found code:
yypkg -init
yypkg -config -setpreds host=%_YY_ARCH%-w64-mingw32
yypkg -config -setpreds target=%_YY_ARCH%-w64-mingw32
sherpa -set-mirror http://win-builds.org/1.3.0/packages/windows_%_YY_BITS%
I think the yypkg.exe does the initialization work and configs sherpa and let sherpa.exe to download and install files.
My question is how can config yypkg my username and password? I did google search, but I cannot find any info about yypkg nor how to config sherpa.
[enter code here][1]Proxy set up can be done via command line
How can I set a proxy server for gem?
set http_proxy=http://your_proxy:your_port
set http_proxy=http://username:password#your_proxy:your_port
set https_proxy=https://your_proxy:your_port
set https_proxy=https://username:password#your_proxy:your_port
These command snippets need to be entered on 'cmd.exe', and before running the wget, to download files manually via portable wget as described on page:
http://win-builds.org/doku.php/download_and_installation_from_windows
few IMPORTANT Pointers, after the packages have been downloaded manually, and running the 'yypkg-1.5.0.exe'
At first the Application UI is unresponsive, DO NOT CLOSE IT
After some time, change mirror dialog appears where you would need to type/paste the Local folders location(this is the folder where files were downloaded manually)
Local folder path needs to be similar to the following where 'package_list.el.tar.xz' file resides.
file:///C:/usr/MinGW/1.5.0/packages/windows_64
after that all works fine