Kinect DK Create Recording - azurekinect
Just received the new Kinect DK and installed the SDK on a W10 machine, then run
C:\temp>k4arecorder.exe -l 5 output.mkv
libusb: error [winusbx_open] could not open device \\.\USB#VID_045E&PID_097C#000041292112#{A5DCBF10-6530-11D2-901F-00C04FB951ED} (interface 0): [5] Access is denied.
[2019-07-03 16:53:10.760] [error] [t=9816] D:\a\1\s\extern\Azure-Kinect-Sensor-SDK\src\usbcommand\usbcommand.c (305): find_libusb_device(). Unable to open LIBUSB at index 0
[2019-07-03 16:53:10.761] [error] [t=9816] D:\a\1\s\extern\Azure-Kinect-Sensor-SDK\src\depth_mcu\depth_mcu.c (68): usb_cmd_create(USB_DEVICE_DEPTH_PROCESSOR, device_index, NULL, &depthmcu->usb_cmd) returned failure in depthmcu_create()
[2019-07-03 16:53:10.762] [error] [t=9816] D:\a\1\s\extern\Azure-Kinect-Sensor-SDK\src\sdk\k4a.c (129): depthmcu_create(index, &device->depthmcu) returned failure in k4a_device_open()
Runtime error: k4a_device_open() failed
Runtime error: k4a_device_get_serialnum(device, serial_number_buffer, &serial_number_buffer_size) returned 1
The cmd window was started in Admin mode, as was the viewer. Seems I cannot record on W10, but it works as described in Ubuntu 18.04. Seems it's an access condition, but not sure where.
the reason you cannot open the device is because you connected it to the wrong port. Check out https://learn.microsoft.com/en-us/azure/Kinect-dk/troubleshooting#usb3-host-controller-compatibility and try to connect the device to a different USB port.
We are working to try to make this error clearer. Access denied from libusb could also be due to the handle already being in use by another instance. On Windows you may also have the camera disabled (either you our a company policy). Check Settings -> Privacy for the global camera state.
Related
Using MSAL in CloudShell
I've validated the MSAL auth path using the desktop PowerShell 5.1 and 7.0 applications. However, all of the authentication paths which worked on the desktop are not working in CloudShell - PS /home/michael/CSTest/0.0.2/MicrosoftTeams> connect-microsoftteams Connect-MicrosoftTeams: One or more errors occurred. (Unable to open a web page using xdg-open. See inner exception for details. Possible causes for this error are: xdg-open is not installed or it cannot find a way to open an url - make sure you can open a web page by invoking from a terminal: xdg-open https://www.bing.com ) Connect-MicrosoftTeams: Unable to open a web page using xdg-open. See inner exception for details. Possible causes for this error are: xdg-open is not installed or it cannot find a way to open an url - make sure you can open a web page by invoking from a terminal: xdg-open https://www.bing.com Connect-MicrosoftTeams: No such file or directory Connect-MicrosoftTeams: One or more errors occurred. (Unable to open a web page using xdg-open. See inner exception for details. Possible causes for this error are: xdg-open is not installed or it cannot find a way to open an url - make sure you can open a web page by invoking from a terminal: xdg-open https://www.bing.com ) PS /home/michael/CSTest/0.0.2/MicrosoftTeams> connect-microsoftteams -UseDeviceAuthentication To sign in, use a web browser to open the page https://microsoft.com/devicelogin and enter the code BRZPG2UNE to authenticate. Connect-MicrosoftTeams: One or more errors occurred. (Windows Data Protection API (DPAPI) is not supported on this platform.) Connect-MicrosoftTeams: Windows Data Protection API (DPAPI) is not supported on this platform. Connect-MicrosoftTeams: One or more errors occurred. (Windows Data Protection API (DPAPI) is not supported on this platform.) PS /home/michael/CSTest/0.0.2/MicrosoftTeams> connect-microsoftteams -AccountId miluong#microsoft.com Connect-MicrosoftTeams: One or more errors occurred. (Federated service at https://msft.sts.microsoft.com/adfs/services/trust/13/windowstransport returned error: ) Connect-MicrosoftTeams: Federated service at https://msft.sts.microsoft.com/adfs/services/trust/13/windowstransport returned error: Connect-MicrosoftTeams: Federated service at https://msft.sts.microsoft.com/adfs/services/trust/13/windowstransport returned error: Connect-MicrosoftTeams: One or more errors occurred. (Federated service at https://msft.sts.microsoft.com/adfs/services/trust/13/windowstransport returned error: ) How do I enable support for managed identity? How do I get interactive auth flow to work without xdg-open? Currently CloudShell does not install xdg-open Is there a recommended path to try to acquire a token without DPAPI? CloudShell works in a Linux environment and DPAPI only supports Windows. Do you know of any PS modules which use MSAL that are working in CloudShell?
xdg-open does not work and is not planned to be supported in CloudShell The DPAPI error was because I was trying to protect the token by encrypting it at rest Integrated Windows Authentication is not a supported workflow in CloudShell because it's a Linux based environment.
Error - Failed to register Fiddler as the system proxy
When I try to run FiddleApplication.Startup(startupConfig) FiddlerCoreStartupSettings startupSettings = newFiddlerCoreStartupSettingsBuilder() .ListenOnPort(0) .RegisterAsSystemProxy() .DecryptSSL() .Build(); FiddlerApplication.Startup(startupSettings); In my log events I see: Starting FiddlerCore/4.6.20191.7809 (NoSAZ)... ** LogString: !WARNING: The DefaultLAN Gateway information could not be obtained. ** NotifyUser: Error - Failed to register Fiddler as the system proxy. I'm running the process as administrator. Note: When I run the normal Fiddler UI application everything works fine. Even running an older FiddlerCore version (2.3) is able to register itself as the system proxy. P.S - I also see a warning in Visual Studio - "Please use Telerik.NetworkConnections.NetworkConnectionsManager to register the FiddlerCore Proxy as the system proxy." But I couldn't find any documentation/examples using NetworkConnectionsManager and I couldn't figure out how to use it.
Azkaban Execute error
Got following Error when Executing flow. Error submitting flow bar. azkaban.executor.ExecutorManagerException: org.apache.http.conn.HttpHostConnectException: Connect to localhost:10000 [localhost/127.0.0.1, localhost/0:0:0:0:0:0:0:1] failed: Connection refused (Connection refused) I changed some lines in azkaban.properties. default.timezone.id=Asia/Tokyo jetty.port=8081 executor.port=10000 azkaban using azkaban-solo-server.
It looks as though the azkaban-web-server is not able to contact the azkaban-exec-server. The azkaban executor is a separate process from the azkaban web interface and uses a separate configuration. Firstly, confirm that the executor is running and listening on the correct port. eg. for a non-windows environment: $ ps -elf | grep azkaban-exec-server If it's not running, then it will need to be started. If it is running, then you need to ensure that the listening port of the executor is the same as the executor port configured in the azkaban-web-server azkaban.properties. You can do this by checking the -Dexecutorport argument to the running azkaban-exec-server process or by checking the executor.port value in the azkaban-exec-server azkaban.properties. If this value differs from the executor.port value in the azkaban-web-server azkaban.properties then you need to ensure that the values match (either by modifying executor.port in the azkaban-web-server or azkaban-exec-server azkaban.properties) and that the relevant service(s) get restarted following any configuration changes.
Error : DEP6100 : The following unexpected error occurred during bootstrapping stage 'Connecting to the device '
Error : DEP6100 : The following unexpected error occurred during bootstrapping stage 'Connecting to the device '30F105C9-681E-420b-A277-7C086EAD8A4E'.': DeviceException - Windows Phone IP over USB Transport (IpOverUsbSvc) is not running. Retry after starting Windows Phone IP over USB Transport (IpOverUsbSvc) from the services management console. ParkeerplaatsenApp Severity Code Description Project File Line Error Error : DEP6200 : Bootstrapping 'Device' failed. Device cannot be found. Windows Phone IP over USB Transport (IpOverUsbSvc) is not running. Retry after starting Windows Phone IP over USB Transport (IpOverUsbSvc) from the services management console. ParkeerplaatsenApp These are the errors I get when trying to run my Project on my Windows 10 pc. It's a application about parking spots if this should matter.
I recently had that problem and found that this can have several fixes. First try check if you have that service installed, open PowerShell window and type: Get-Service -Name *USB* Status Name DisplayName Stopped IpOverUsbSvc Windows Phone IP over USB Transport... If you get answer that service is installed but stopped restart it. Start-Service IpOverUsbSvc If no answer try to install windows phone 8 SDK, restart computer try to check again if service is installed then if it is you can continue with debug. If no try to input this registry values to your system registry. Copy paste this below and save as a 'reg' file. Then double click and add, restart computer, check if you have service. Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\IpOverUsbSvc] "DisplayName"="Windows Phone IP over USB Transport (IpOverUsbSvc)" "Description"="Enables communication between Windows Phone SDK and Windows Phone device. If the service is stopped, application deployment and debugging will fail on device." "Type"=dword:00000010 "Start"=dword:00000002 "ErrorControl"=dword:00000000 "ImagePath"=hex(2):22,00,43,00,3a,00,5c,00,50,00,72,00,6f,00,67,00,72,00,61,00,\ 6d,00,20,00,46,00,69,00,6c,00,65,00,73,00,20,00,28,00,78,00,38,00,36,00,29,\ 00,5c,00,43,00,6f,00,6d,00,6d,00,6f,00,6e,00,20,00,46,00,69,00,6c,00,65,00,\ 73,00,5c,00,4d,00,69,00,63,00,72,00,6f,00,73,00,6f,00,66,00,74,00,20,00,53,\ 00,68,00,61,00,72,00,65,00,64,00,5c,00,50,00,68,00,6f,00,6e,00,65,00,20,00,\ 54,00,6f,00,6f,00,6c,00,73,00,5c,00,43,00,6f,00,72,00,65,00,43,00,6f,00,6e,\ 00,5c,00,31,00,31,00,2e,00,30,00,5c,00,62,00,69,00,6e,00,5c,00,49,00,70,00,\ 4f,00,76,00,65,00,72,00,55,00,73,00,62,00,53,00,76,00,63,00,2e,00,65,00,78,\ 00,65,00,22,00,00,00 "ObjectName"="LocalSystem" If this also didn't help yuu check if you have executable under directory: C:\Program Files (x86)\Common Files\Microsoft Shared\Phone Tools\CoreCon\11.0\bin\IpOverUsbSvc.exe Try to install service from normal command prompt using installutil program like this. installutil IpOverUsbSvc.exe Hope that helps.
X11: Start desktop manager inside daemon
What I'm trying to do: Make screenshots of desktop and running program (Firefox Webdriver with Selenium, if it's important) in daemon (celeryd) in auto mode. And I need desktop manager to be running, this is mandatory requirement. Currently I'm trying to use Fluxbox but I can switch to any other manager. Current progress: I can start X-server (Xvfb) in daemon and start Selenium Webdriver. Fluxbox start succeeds when I try to make it from terminal, but fails in daemon with following errors in log: Can't create directory Failed to load database: Failed to load database:/init Retrying with: /etc/X11/fluxbox/init I tried to specify init-file directly, but Can't create directory error still exists and Fluxbox fails to start. This might be daemon-mode restriction. Question: Is it possible to run any desktop manager inside daemon? If yes, then how can I do this?