I have dataflow task in a for each loop in a SSIS package. It dumps data into a ole db destination which is a Sql Server database. It works successfully for about nine iterations in the for-each loop, and then errors out on the tenth:
Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.
The AcquireConnection method call to the connection manager xxxxx failed with error code 0xC0202009.
TCP Only one usage of each socket address protocol/network address/port is normally permitted.
Just to clarify , I am not changing any connections dynamically.
Try changing the RetainSameConnection property on the Connection Manager from false to true. You can find this property by right-clicking the connection manager and then clicking Properties.
Related
I'm new to SSIS. I have tried to use the ODBC connection manager that was already in the list to extract the source data, but failed with the following error message:
The AcquireConnection method call to the connection manager failed with error code 0xC0014009.
The ODBC connection manager is connected to IBM informix.
I have referred to the existing projects and found that they all used the same connection manager and it works fine.
I have tried the 'Test Connection' and it went well. But when I execute the package, error came out.
What could be the possible reason that I can't use the existing connection manager?
I have SSIS package that grabs excel file and load it to sql table .i get the following error when i run it. I have tried to make run on 64 bit to false. That did not work
i also have installed 64 bit access driver engin . That did not help either.
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at ABC [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Failure creating file.".
Failure creating file
This error is thrown when the Excel connection manager cannot access to the chosen path, it might be caused by:
You are using a network path / try replacing with a local path
it might be pointed to your local server, but when it is deployed to another server it will throw error
you do not have permission to access the selected path from the account that is running the SSIS
path does not exists
I had the same error, to fix it I specified the IP of the shared folder instead of FQDN.
I had the same error too, my files are save in a folder OneDrive.
I fix the error by moving the files out from Onerive
I am facing an issue while deploying my SSIS packages to a target machine.
I have done the deployment through an indirect XML configuration. I use one parent package which invokes all the other child packages in loading a data warehouse. Child packages acquire the database connections via a parent package variable. Thus an isolated child package is not executable.
In this setup the flow works perfectly in my development machine. But when I try to deploy it to another one some packages run and populate the tables while others with the same configurations fail. I have made the "Delay Validation" property to true in all the child packages as well.
Follwing are the errors I get in order:
Error 17 Validation error. Extract and Populate Data to DimRetailer: DimRetailer: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for ODBC Drivers" Hresult: 0x80004005 Description: "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified". DimRetailer.dtsx 0 0
Error 18 Validation error. Extract and Populate Data to DimRetailer: Extract and Populate Data to DimRetailer: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Con_XONTRDDATAMART_OLEDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. DimRetailer.dtsx 0 0
Error 19 Validation error. DimRetailer Connection manager "Con_XONTRDDATAMART_OLEDB": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for ODBC Drivers" Hresult: 0x80004005 Description: "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified". DimRetailer.dtsx 0 0
Error 20 Validation error. Extract and Populate Data to DimRetailer Expire Old SCD2 Rows [617]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Con_XONTRDDATAMART_OLEDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. DimRetailer.dtsx 0 0
What I can not realize is why some packages run alright while others fail which share the same connections.
Additionally, the final deployment will be on a server with a 64 bit OS, are there any steps I should specifically take to make the deployment run smoothly?
Thank you very much for any contribution, in advance.
I have a setup similar to yours. However, what i share to child packages is a connection string. It might be worth a try if you are still facing the same issue
I have an SSIS package that imports an excel spreadsheet into an SQL Server 2008 database.
I have an Excel connection in the Connection Managers tab and it points to an Excel file on my local computer.
But when I open the Excel Source in Data Flow, if I try to view columns or change the "Name of Excel sheet:" I get this error.
Error at LoadMasterData [Connection manager "SourceConnectionExcel"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
Error at Data Flow Task 1 [Source - Sheet1$ [1]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
The package was saved from SQL Server Management Studio using Import Data. When I run the package it works fine but I want to be able to specify the spreadsheet name as a variable. When I change the option to specify the sheet name as a variable, it won't let me close the window with the "OK" button, and just keeps giving me the same error as above.
Has anyone experienced this behaviour before that can help me get this working?
Thanks
Are you running on 32bit or 64bit? if you're on 64bit you need to know that there are no providers for Excel - you'll have to enforce the package to not use 64bit. Right click project, properties, debugging: Run64BitRuntime - set to false.
I'm trying to get transactions working under SSIS (SQL Server Integration Services 2005) and Oracle with no luck. I'm using Oracle 10g.
I have created a Sequence Container, set its TransactionOption to "Required" and put inside it a DataFlow Task with TransactionOption = "Supported".
The server running SSIS has the MSDTC service running.
The DataFlow Task has, as source, a SQL Server OLEDB connection and as target an Oracle OLEDB connection.
When trying to execute it, I get the following errors:
Error: 0xC001402C at MediaMarketAnnullamento, Connection manager "ITMASORASVIL:1521/SVILUPPO.EDP": The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D01B "The Transaction Manager is not available.".
Error: 0xC0202009 at MediaMarketAnnullamento, Connection manager "ITMASORASVIL:1521/SVILUPPO.EDP": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8004D01B.
Error: 0xC020801C at 9999 - Insert_MAGAZZZINO_MM_SHOW, MAGAZZINO_MM_SHOW_SSIS [2187]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ITMASORASVIL:1521/SVILUPPO.EDP" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC004701A at 9999 - Insert_MAGAZZZINO_MM_SHOW, DTS.Pipeline: component "MAGAZZINO_MM_SHOW_SSIS" (2187) failed the pre-execute phase and returned error code 0xC020801C.
Information: 0x40043009 at 9999 - Insert_MAGAZZZINO_MM_SHOW, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at 9999 - Insert_MAGAZZZINO_MM_SHOW, DTS.Pipeline: "component "MAGAZZINO_MM_SHOW_SSIS" (2187)" wrote 0 rows.
Task failed: 9999 - Insert_MAGAZZZINO_MM_SHOW
Information: 0x4001100C at 9999 - Insert_MAGAZZZINO_MM_SHOW: Aborting the current distributed transaction.
Information: 0x4001100C at Insert su Oracle: Aborting the current distributed transaction.
SSIS package "MediaMarketAnnullamento.dtsx" finished: Failure.
Any help?
Thanks
EDIT:
I just discovered that the server running Oracle is not, as I thought, Windows based but IBM ICS. I don't know if this is relevant.
Looks like it may be a problem with MSDTC permissions this MS blog post might help to debug it. Also I'm assuming that the permissions on the Oracle server are set correctly see this MS kb article for help with this.
Is this doc of any use?
http://msdn.microsoft.com/en-us/library/aa344212.aspx