How to play sound if phone connects to network? - batch-file

I try to write a little batch script. It should play a sound if my phone joins my network.
#echo off
:A
ping -n 1 xxx.xxx.xxx.xx | findstr TTL && start airsiren.wav
goto A
The problem is now that if the phone is detected, it repeatedly starts the sound. But it's supposed to just play once.
Does anyone know a simple fix? Maybe with an IF condition?
I haven't been doing much with batch, but I think I got some basic knowledge.

I suggest following code:
#echo off
set "LastExitCode=1"
:Loop
%SystemRoot%\System32\ping.exe -n 1 xxx.xxx.xxx.xx | %SystemRoot%\System32\find.exe /C "TTL" >nul
if not %ErrorLevel% == %LastExitCode% set "LastExitCode=%ErrorLevel%" & if %ErrorLevel% == 0 start "Play sound" airsiren.wav
%SystemRoot%\System32\timeout.exe /T 5 /NOBREAK
if not errorlevel 1 goto Loop
PING outputs a line with TTL if there is a response on echo request and exits usually with value 0 on receiving a response and with 1 on getting no response. But PING does not always exit with 0 on a positive response which is the reason for using FIND.
FIND processes the output of PING and searches for lines containing the string TTL. FIND exits with value 0 on finding at least one line with TTL and otherwise with 1 for indicating no line found containing the search string. The output of FIND to handle STDOUT is of no interest and therefore reduced to a minimum by using option /C and redirected to device NUL.
Now the exit code of FIND is compared with an environment variable which holds last exit value of FIND initialized with value 1.
On current exit code being equal last exit code, there is no change in availability of the pinged device on network and therefore nothing to do.
Otherwise on a difference the current exit code is assigned to the environment variable for next loop run and current exit code is compared with value 0. If this second condition is true the pinged device sent the first time a positive response on echo request by PING. In this case the sound is played.
There is nothing else done on pinged device not available anymore on network, i.e. the exit code changes from 0 to 1.
Then a delay of 5 seconds is started using TIMEOUT with giving the user to break it with Ctrl+C. This reduces the processor core usage giving Windows the possibility to use the processor core for other processes and also reduces network usage when the pinged device is available at the moment on network. And of course the pinged device does not need anymore to permanently response on echo requests.
A jump to label Loop is done if TIMEOUT exited normally without a user break. Otherwise on user pressing Ctrl+C the batch file processing also ends.
TIMEOUT with parameter /NOBREAK requires Windows 7 or a later Windows version.
For understanding the used commands and how they work, open a command prompt window, execute there the following commands, and read entirely all help pages displayed for each command very carefully.
echo /?
find /?
goto /?
if /?
ping /?
set /?
start /?
timeout /?
See also single line with multiple commands using Windows batch file for an explanation of operator & and meaning of if not errorlevel 1.

This can be fixed very easily using %errorlevel% and an IF statement.
Original script by Jelle Geerts.
#ECHO OFF
:Search
ping -n 1 "xxx.xxx.xxx.xx" | findstr /r /c:"[0-9] *ms"
if %errorlevel% == 0 (
echo Device was found!
start airsiren.wav
pause.
) else (
goto Search
)

My solution:
#echo off &:: modem_tester_xp+.bat
REM original https://www.elektroda.pl/rtvforum/topic2917839.html
setlocal EnableDelayedExpansion
rem set connection name (for newer than Win XP) from Network Connections (preferred name doesn't have space)
set _connection_name=internet
rem make file which close this script
echo #echo.^>"%~dpn0.exit"^&#del /q "%%~f0">"%~dp0close_%~nx0"
for /f "tokens=2-4 delims==." %%a in ('wmic os get Version /value ^|find "="') do if "%%~c" neq "" set "_system_version=%%~a.%%~b"
set "_con_ip="
set "_my_ip.last="
:start
::-n (seconds+1)
ping 127.0.0.1 >nul -n 3
set "_my_ip="
if not defined _con_ip call :get_con_ip "%_connection_name%"
if defined _con_ip for /f "tokens=3-5 delims= " %%p in ('route print ^|find " 0.0.0.0 "') do if "%%~r" neq "" if /i "%%~p"=="%_con_ip%" ( set "_my_ip=%%~p" ) else if /i "%%~q"=="%_con_ip%" set "_my_ip=%%~q"
rem if connection lost clean variable _my_ip.last
if not defined _my_ip (
set "_con_ip="
set "_my_ip.last="
) else if /i "%_my_ip%" neq "%_my_ip.last%" (
rem remember last connection addres
set "_my_ip.last=%_my_ip%"
call :2run
)
if not exist "%~dpn0.exit" goto start
del /q "%~dpn0.exit"
endlocal
goto :eof
:get_con_ip &::ConnectionName:return variable _con_ip
if "%_system_version%"=="5.1" (
rem XP find modem address
for /f "tokens=2 delims== " %%a in ('netsh diag show gateway WAN* ^|find "." ^|find "="') do if "!_con_ip!"=="" set "_con_ip=%%~a"
) else (
rem if newer works like win7, if not: if "%_system_version%"=="6.1" (rem Windows 7
if "%~1" neq "" for /f "tokens=1,4* delims= " %%n in ('netsh interface ipv4 show interfaces ^|find /i "%~1"') do if "!_con_ip!"=="" if /i "%%~p"=="%~1" for /f "tokens=1* delims=:" %%i in ('netsh interface ipv4 show addresses %%~n ^|find "." ^|find /i "ip"') do if "!_con_ip!"=="" set "_con_ip=%%~j"
if "!_con_ip!" neq "" set "_con_ip=!_con_ip: =!"
)
goto :eof
:2run
rem run external
rem start "modem started" /min /b cmd /c "echo %date% %time% '%_my_ip%'&pause"
start airsiren.wav

There are two problems with your code
Your code will unconditionally goes to the beginning even after the phone is connected, so it repeats playing the sound. You could use ... && (start airsiren.wav & goto :EOF) to terminate the batch file or use another label other than :EOF to do something else. But this doesn't give you the option to keep monitoring the phone for disconnection and re-connection.
You have to check the setting of the default media player (Typically Windows Media Player) and make sure that it is not set to continuously loop or repeat the media. Also it is overkill and somewhat inconvenient to launch a full fledged media player just for playing back a short notification sound, and usually you have to close the media player afterwards.
So this is the code I propose which solves the above mentioned obstacles by providing the option to continuously monitor the phone's connection status and also provide a more programmatic way to play the notification sound in a self contained player by using a hybrid BAT/JSCript solution.
#if (#Code)==(#BatchScript) /* Hybrid BAT/JScript line */
#echo off
setlocal EnableExtensions DisableDelayedExpansion
set #PlaySound=start "" /b cscript //nologo //e:JScript "%~f0"
set "SoundFile.Connect=%SystemRoot%\media\ringout.wav"
set "SoundFile.Disconnect=?"
set "GenFail.Localized.Text=General failure"
:: set to 0 to disable continuous connection monitoring
set "ContinuousMonitoring=1"
set "PhoneIP=xxx.xxx.xxx.xxx"
set "Timeout=3000"
setlocal EnableDelayedExpansion
set "CheckGeneralFailure=1"
echo [%TIME%] Waiting for connection...
:WaitForConnection
ping -n 1 %PhoneIP% -w %Timeout% | findstr "TTL" >nul && (
echo [!TIME!] Phone Connected.
!#PlaySound! "!SoundFile.Connect!"
if %ContinuousMonitoring% NEQ 0 goto :MonitorConnection
goto :EOF
) || (
if !CheckGeneralFailure! NEQ 0 (
ping -n 1 %PhoneIP% -w 100 | findstr /i /c:"%GenFail.Localized.Text%" >nul && (
ping -n 1 -w %Timeout% 127.255.255.255 >nul
(call,) %= Set errorlevel to 0 =%
) || set "CheckGeneralFailure=0"
)
goto :WaitForConnection
)
:MonitorConnection
ping -n 1 %PhoneIP% | findstr "TTL" >nul && (
ping -n 1 -w %Timeout% 127.255.255.255 >nul
goto :MonitorConnection
) || (
echo [!TIME!] Phone Disconnected.
echo [!TIME!] Waiting for connection...
set "CheckGeneralFailure=1"
REM Play another sound for disconnect?
goto :WaitForConnection
)
goto :EOF
/*** End of batch code ***/
#end
/*** JScript Sound Player ***/
var wmpps = {
Undefined : 0,
Stopped : 1,
Paused : 2,
Playing : 3,
ScanForward : 4,
ScanReverse : 5,
Buffering : 6,
Waiting : 7,
MediaEnded : 8,
Transitioning : 9,
Ready : 10,
Reconnecting : 11,
Last : 12
};
var SoundFile;
if (WScript.Arguments.length) SoundFile = WScript.Arguments(0);
var WaitCount = 0;
var objPlayer = new ActiveXObject("WMPlayer.OCX.7");
with(objPlayer) {
URL = SoundFile;
settings.volume = 100;
settings.setMode("loop", false);
controls.play();
while(playState == wmpps.Transitioning) {
WaitCount+=1;
if (WaitCount > 200) break;
WScript.Sleep(10);
}
if (playState == wmpps.Playing) {
while(playState != wmpps.Stopped) WScript.Sleep(1000);
}
close();
}

Related

Batch file to edit .ini file but do not delete blank space

I am new to StackOverflow. I want to run a batch file to find and replace a single string in an .ini file. I tried several solutions given on stackoverflow and other sites too.
A few of them are working - but delete my other lines having "space" or ";".
Here is the string that I want to find and change in my file RDConfigSettings.ini
CommunicationMode:1
I want it vice-versa:
if it is "CommunicationMode:1" then change it to "CommunicationMode:0"
if it is "CommunicationMode:0" then change it to "CommunicationMode:1"
Here is the whole content of my RDConfigSettings.ini file
;0 for Staging, 1 for Pre-Production, 2 for Production
RDEnviroment:2
;0 for disable, 1 for Enable
RDServiceLogs:0
;0 for disable, 1 for Enable
ClientValidation:0
;Validate Management Server Certificate -- 0 for Yes, 1 for No
ValidateCertificate:0
;Proxy Configuration -- 0 for Direct Internet Access, 1 for Access via Proxy
ProxyConfig:0
ProxyIP:[Proxy IP]
ProxyPort:[Proxy Port]
;0 for Https, 1 for Http
CommunicationMode:1
;Port Range Setting in below field
PortBegin:11100
PortEnd:11120
;ManagementServerURL
Registration:https://rdm.smartbioplus.com/rdm-device-app/registration
Keyrotation:https://rdm.smartbioplus.com/rdm-key-management-app/keyRotation
Telemetry:https://rdm.smartbioplus.com/rdm-telemetry-app/telemetry
Domain:rdm.smartbioplus.com
URL_Port:443
Could anyone help me? THis is my code:
#echo off
set "file=E:\CSC Softwares\MorphoRdServiceL0Soft\RDConfigSettings.ini"
:loop
findstr "^CommunicationMode:0$" "%file%" >nul || (
type "%file%"|repl "^CommunicationMode:1" "CommunicationMode:0" >"%file%.tmp"
move "%file%.tmp" "%file%" >nul
)
timeout 120 >nul
goto :loop
Moreover, it will be a great help if someone can add an Command with administrative rights that will stop a particular service "MORPHO_RD_Service" before replacing the string and then after replace the string, start the same service again.
You have code to switch from 1 to 0, but no code to switch from 0 to 1.
Below code alternates between 1 and 0 with each run of the loop.
I also changed to jrepl (more modern and powerful). It isn't necessary (though possible) to process piped data and redirect the result to another file. The /f switch gives the inputfile to process, the /o switch gives the outputfile. By giving it a single -, it uses the same filename as the input file (and overwrites it with the new(changed) data).
#echo off
set "file=t.txt"
:loop
findstr "^CommunicationMode:" "%file%" & REM this line for troubleshooting only
findstr "^CommunicationMode:0$" "%file%" >nul && (
call jrepl "CommunicationMode:0" "CommunicationMode:1" /f "%file%" /o -
) || (
call jrepl "CommunicationMode:1" "CommunicationMode:0" /f "%file%" /o -
)
timeout 1 >nul
goto :loop
Don't forget to adapt the data file name and the timeout to your needs.
Without the need for an external utility such as jrepl, which is great for some things, but not needed for such a task:
#echo off
setlocal enabledelayedexpansion
set "file=E:\CSC Softwares\MorphoRdServiceL0Soft\RDConfigSettings.ini"
for /f "tokens=1,*delims=]" %%i in ('type "%file%" ^| find /v /n "" ^& break^>"%file%"') do (
set "line=%%j"
if "!line!" == "CommunicationMode:1" (
set "line=!line:1=0!"
set "hold=!line!"
) else if "!line!" == "CommunicationMode:0" (
set "line=!line:0=1!"
set "hold=!line!"
)
echo(!line!>>"!file!"
)
echo Changed to !hold!
pause

Better way to use findstr to get packet loss, batch

Looking to use findstr to get it to find "0% loss" after a ping command.
Perhaps an array of anything up to "50% loss".
This is for checking and ensuring a connection to the internet is 100% established before launching something online.
Currently it's structured:
ping %ip% -n 3 -w 3000 | findstr "0% loss"
pause
goto Starting
It's currently ignoring findstr and no matter what it refuses to find what I'm looking for
Ideally it would flow like:
ping %ip% -n 3 -w 3000 | findstr "0% loss" || goto Echo
pause
goto Starting
:echo
Could not find "0% loss"
pause
And I have tried that, it will go to echo, but even with 100% connection so it's clearly just not operating how I'd like it to.
Is there a better way to find % packet loss?
Or
Is there a better way to test internet connection, given ping doesn't work when a device is totally offline.
The search string you are looking for is too broad. When you check findstr for "0% loss", you are inadvertently picking up "100% loss" as well. Fortunately, ping puts the packet loss in parentheses, so you can simply include the open parenthesis in the search string.
#echo off
title Restart
color 0A
cls
:start
Cls
set ip=www.google.com
:Pingcheck
echo Checking ping..
timeout /t 3
ping %ip% -n 5 -w 3000 | findstr /C:"(0% loss" || goto Loss
pause
:NoLoss
echo We found 0 packet loss, at %ip% on %date% at %time%
pause
goto start
:Loss
echo We found some packet loss.
pause
I've also changed the name of the :Echo label because echo is already a command and having it also be a label would be confusing.
You can also check ping status with wmi. The advantage to this method is that it'll goto :fail on the first failure, and not continue its lost cause of completing 5 ping attempts, while also providing a simple way to preserve the average response time. It uses set /a to check whether the result of the wmi query contains a numeric value. If it does, pass. If not, fail.
#echo off & setlocal
set "host=www.google.com"
echo Pinging %host%...
for /L %%I in (1,1,5) do (
for /f "delims=" %%x in (
'wmic path win32_pingstatus where "address='%host%' and timeout=3000"^
get ResponseTime /value ^| find "="'
) do (
2>NUL set /a "%%x, avg += ResponseTime" || goto fail
)
)
set /a "avg /= 5"
echo 0%% packet loss. Woo. Average response time was %avg%ms.
exit /b
:fail
echo Aw snap. Packet loss.

Second instance of batch loop does not run

I am trying to create a DOS batch script on my Windows 7 machine. I want to execute file 123456.bat, which contains the following command and parameters:
call **startSelenium.bat** 55 someSuiteName suite-someSuite.html development 1 1 10 10
That script calls into the startSelenium.bat script below:
Setlocal EnableDelayedExpansion
SET TimeStamp=
FOR /f "tokens=1-4 delims=/ " %%i in ("%date%") do set datestr=%%l%%j%%k
FOR /f "tokens=1-4 delims=.: " %%i in ("%time%") do set timestr=%%i%%j%%k%%l
SET TimeStamp=%datestr%%timestr%
set a=2
set b=0
set /a c=%a%+%b%
FOR /l %%t IN (1, 1, %c%) do (
call :SEARCHPORT %%t
echo %startPort%
Start java -jar C:\Selenium\2\selenium-server-standalone-2.47.1.jar -port %startPort% -singleWindow -userExtensions C:\selenium\2\user-extensions.js -firefoxProfileTemplate "c:\selenium\2\ffprofiles\2rc" -htmlSuite "*chrome" "https://www.google.com" "Z:\selenium\2\environment\%4\suites\%3" "u:\results\%4\result-%1-%computername%-1234-%TimeStamp%.htm"
timeout /t 10
)
GOTO :EOF
:SEARCHPORT
netstat -o -n -a | find "LISTENING" | find ":%startPort% " > NUL
if "%ERRORLEVEL%" equ "0" (
set /a startPort +=1
GOTO :SEARCHPORT
) ELSE (
set freePort=%startPort%
echo %startPort%
GOTO :EOF
When I run the script, the first instance of the java applications runs with a free Windows port that the SEARCHPORT subroutine found; however, the second instance pops up and quits immediately. I suspect the code is using the same variable from the first time it went through the FOR loop instead of getting a new unused port number.
What am I doing wrong? I copied various parts of this code from other sources. I am obviously a nube, so plain English would be helpful. :)
You have got an delayed expansion issue.
You already enabled delayed expansion, but you don't use it. You have to replace %startPort% with !startPort! inside your for /l loop.

Batch to pattern matching in a loop

I am trying to loop through a file which contains few names and search the same with two patterns in another file and echo some statements.
Like I have two files :
1.Installers.txt
2.Progress.txt
Installers.txt
abc.jar
def.jar
tef.jar
....
....
Progress.txt
abc.jar deployment started
abc.jar deployed successfully
def.jar deployment started
So my requirement is to read the Installers.txt file one line at a time and search for the 2 patterns "abc.jar deployment started" and "abc.jar deployed successfully" and report successful or else if both patterns are yet to be found to show as still in progress.
I have tried writing below but its failing at many things while doing pattern and the logic also does not look good. can someone help here.
for /F "usebackq delims=" %%a in ("Installer.txt") do (
set /A i+=1
call echo installing %%i%% : %%a
:NOTVALID
findstr /I "%%k\ in\ progress" %1%\progress.txt
If errorlevel 1 (
echo "installation still in progress.."
PING 127.0.0.1 -n 1 >NUL 2>&1 || PING ::1 -n 1 >NUL 2>&1
goto NOTVALID
) else (
set /A i+=1
echo "installation completed.."
call set array[%%i%%]=%%a
call set n=%%i%%
)
Try the below code which suite your requirement :
cls
#echo off
for /f %%g in (Installers.txt) do type Progress.txt|findstr "%%g" || echo %%g is Yet to start , still in progress
Above code will read a single line from installer and then search for that string in file Progress.txt and then print the output if it is found or not.

What is wrong with goto command in for loop?

I have a list of computers that I want to make some things according to tcp connection status.
I'm trying to check tcp connection and if errorlog is "1" so write line to log and skip to next computer.
The problem is that when a computer has no tcp connection the goto skip_action command takes the script to the end and exit and the other computers in the list left unprocessed.
I have also tried to use goto :eof and it terminates the script unexpected.
ipst.txt file:
1 10.1.1.10
3 10.1.3.10
8 10.1.3.10
This is the batch file code:
#echo off
setlocal enabledelayedexpansion
set computerslist=ipst.txt
for /f "usebackq tokens=1,2" %%A in ("%Computerslist%") do (
cls
set Station_Num=%%A
set Comp_IP=%%B
ping !Comp_IP! -n 1 | findstr "TTL"
if !errorlevel!==1 (
echo Station !Station_Num! .... !Comp_IP! ..................... No Communication.>>%log%
goto skip_action
)
echo Getting Administrator Credentials:
net use \\!Comp_IP! /USER:WORKGROUP\****** ******
echo.
xcopy file.txt \\!Comp_IP!\c\temp\
echo Disconneting Session From Remote Computer :
net use \\!Comp_IP! /DELETE /YES
:skip_action
echo end of working on !Station_Num!
)
echo end of script
The problem here is that GOTO cancels the for loop.
But you can simply enclose your action in an ELSE block
for /f "usebackq tokens=1,2" %%A in ("%Computerslist%") do (
cls
set Station_Num=%%A
set Comp_IP=%%B
ping !Comp_IP! -n 1 | findstr "TTL"
if !errorlevel!==1 (
echo Station !Station_Num! .... !Comp_IP! ..................... No Communication.>>%log%
) Else (
echo Getting Administrator Credentials:
net use \\!Comp_IP! /USER:WORKGROUP\****** ******
echo.
xcopy file.txt \\!Comp_IP!\c\temp\
echo Disconneting Session From Remote Computer :
net use \\!Comp_IP! /DELETE /YES
)
echo end of working on !Station_Num!
)
General form of if - else statement
If condition (
Statements
) else (
Statements to be executed if condition is not met
)
Make your call from the loop
You can have a function ping .. and parse variable references to it .. the preceding code could also be rendered as %%a and %%b being the first and second argument respectively -- in your function call ...
Call :pingcomputers %%a %%b
This way you avoid set altogether
:pingcomputers
Rem Pinging computer %~1
Ping %~2 ¦ find "reply"
If errorlevel 1 goto failed
(Actions to be performed if ping wa successful)
Assuming that your script has a label failed and actions to.be performed if error level is not 0 ..
Not much of a script but hope it helps ...

Resources