I am trying to loop through a file which contains few names and search the same with two patterns in another file and echo some statements.
Like I have two files :
1.Installers.txt
2.Progress.txt
Installers.txt
abc.jar
def.jar
tef.jar
....
....
Progress.txt
abc.jar deployment started
abc.jar deployed successfully
def.jar deployment started
So my requirement is to read the Installers.txt file one line at a time and search for the 2 patterns "abc.jar deployment started" and "abc.jar deployed successfully" and report successful or else if both patterns are yet to be found to show as still in progress.
I have tried writing below but its failing at many things while doing pattern and the logic also does not look good. can someone help here.
for /F "usebackq delims=" %%a in ("Installer.txt") do (
set /A i+=1
call echo installing %%i%% : %%a
:NOTVALID
findstr /I "%%k\ in\ progress" %1%\progress.txt
If errorlevel 1 (
echo "installation still in progress.."
PING 127.0.0.1 -n 1 >NUL 2>&1 || PING ::1 -n 1 >NUL 2>&1
goto NOTVALID
) else (
set /A i+=1
echo "installation completed.."
call set array[%%i%%]=%%a
call set n=%%i%%
)
Try the below code which suite your requirement :
cls
#echo off
for /f %%g in (Installers.txt) do type Progress.txt|findstr "%%g" || echo %%g is Yet to start , still in progress
Above code will read a single line from installer and then search for that string in file Progress.txt and then print the output if it is found or not.
Related
I am new to StackOverflow. I want to run a batch file to find and replace a single string in an .ini file. I tried several solutions given on stackoverflow and other sites too.
A few of them are working - but delete my other lines having "space" or ";".
Here is the string that I want to find and change in my file RDConfigSettings.ini
CommunicationMode:1
I want it vice-versa:
if it is "CommunicationMode:1" then change it to "CommunicationMode:0"
if it is "CommunicationMode:0" then change it to "CommunicationMode:1"
Here is the whole content of my RDConfigSettings.ini file
;0 for Staging, 1 for Pre-Production, 2 for Production
RDEnviroment:2
;0 for disable, 1 for Enable
RDServiceLogs:0
;0 for disable, 1 for Enable
ClientValidation:0
;Validate Management Server Certificate -- 0 for Yes, 1 for No
ValidateCertificate:0
;Proxy Configuration -- 0 for Direct Internet Access, 1 for Access via Proxy
ProxyConfig:0
ProxyIP:[Proxy IP]
ProxyPort:[Proxy Port]
;0 for Https, 1 for Http
CommunicationMode:1
;Port Range Setting in below field
PortBegin:11100
PortEnd:11120
;ManagementServerURL
Registration:https://rdm.smartbioplus.com/rdm-device-app/registration
Keyrotation:https://rdm.smartbioplus.com/rdm-key-management-app/keyRotation
Telemetry:https://rdm.smartbioplus.com/rdm-telemetry-app/telemetry
Domain:rdm.smartbioplus.com
URL_Port:443
Could anyone help me? THis is my code:
#echo off
set "file=E:\CSC Softwares\MorphoRdServiceL0Soft\RDConfigSettings.ini"
:loop
findstr "^CommunicationMode:0$" "%file%" >nul || (
type "%file%"|repl "^CommunicationMode:1" "CommunicationMode:0" >"%file%.tmp"
move "%file%.tmp" "%file%" >nul
)
timeout 120 >nul
goto :loop
Moreover, it will be a great help if someone can add an Command with administrative rights that will stop a particular service "MORPHO_RD_Service" before replacing the string and then after replace the string, start the same service again.
You have code to switch from 1 to 0, but no code to switch from 0 to 1.
Below code alternates between 1 and 0 with each run of the loop.
I also changed to jrepl (more modern and powerful). It isn't necessary (though possible) to process piped data and redirect the result to another file. The /f switch gives the inputfile to process, the /o switch gives the outputfile. By giving it a single -, it uses the same filename as the input file (and overwrites it with the new(changed) data).
#echo off
set "file=t.txt"
:loop
findstr "^CommunicationMode:" "%file%" & REM this line for troubleshooting only
findstr "^CommunicationMode:0$" "%file%" >nul && (
call jrepl "CommunicationMode:0" "CommunicationMode:1" /f "%file%" /o -
) || (
call jrepl "CommunicationMode:1" "CommunicationMode:0" /f "%file%" /o -
)
timeout 1 >nul
goto :loop
Don't forget to adapt the data file name and the timeout to your needs.
Without the need for an external utility such as jrepl, which is great for some things, but not needed for such a task:
#echo off
setlocal enabledelayedexpansion
set "file=E:\CSC Softwares\MorphoRdServiceL0Soft\RDConfigSettings.ini"
for /f "tokens=1,*delims=]" %%i in ('type "%file%" ^| find /v /n "" ^& break^>"%file%"') do (
set "line=%%j"
if "!line!" == "CommunicationMode:1" (
set "line=!line:1=0!"
set "hold=!line!"
) else if "!line!" == "CommunicationMode:0" (
set "line=!line:0=1!"
set "hold=!line!"
)
echo(!line!>>"!file!"
)
echo Changed to !hold!
pause
I try to write a little batch script. It should play a sound if my phone joins my network.
#echo off
:A
ping -n 1 xxx.xxx.xxx.xx | findstr TTL && start airsiren.wav
goto A
The problem is now that if the phone is detected, it repeatedly starts the sound. But it's supposed to just play once.
Does anyone know a simple fix? Maybe with an IF condition?
I haven't been doing much with batch, but I think I got some basic knowledge.
I suggest following code:
#echo off
set "LastExitCode=1"
:Loop
%SystemRoot%\System32\ping.exe -n 1 xxx.xxx.xxx.xx | %SystemRoot%\System32\find.exe /C "TTL" >nul
if not %ErrorLevel% == %LastExitCode% set "LastExitCode=%ErrorLevel%" & if %ErrorLevel% == 0 start "Play sound" airsiren.wav
%SystemRoot%\System32\timeout.exe /T 5 /NOBREAK
if not errorlevel 1 goto Loop
PING outputs a line with TTL if there is a response on echo request and exits usually with value 0 on receiving a response and with 1 on getting no response. But PING does not always exit with 0 on a positive response which is the reason for using FIND.
FIND processes the output of PING and searches for lines containing the string TTL. FIND exits with value 0 on finding at least one line with TTL and otherwise with 1 for indicating no line found containing the search string. The output of FIND to handle STDOUT is of no interest and therefore reduced to a minimum by using option /C and redirected to device NUL.
Now the exit code of FIND is compared with an environment variable which holds last exit value of FIND initialized with value 1.
On current exit code being equal last exit code, there is no change in availability of the pinged device on network and therefore nothing to do.
Otherwise on a difference the current exit code is assigned to the environment variable for next loop run and current exit code is compared with value 0. If this second condition is true the pinged device sent the first time a positive response on echo request by PING. In this case the sound is played.
There is nothing else done on pinged device not available anymore on network, i.e. the exit code changes from 0 to 1.
Then a delay of 5 seconds is started using TIMEOUT with giving the user to break it with Ctrl+C. This reduces the processor core usage giving Windows the possibility to use the processor core for other processes and also reduces network usage when the pinged device is available at the moment on network. And of course the pinged device does not need anymore to permanently response on echo requests.
A jump to label Loop is done if TIMEOUT exited normally without a user break. Otherwise on user pressing Ctrl+C the batch file processing also ends.
TIMEOUT with parameter /NOBREAK requires Windows 7 or a later Windows version.
For understanding the used commands and how they work, open a command prompt window, execute there the following commands, and read entirely all help pages displayed for each command very carefully.
echo /?
find /?
goto /?
if /?
ping /?
set /?
start /?
timeout /?
See also single line with multiple commands using Windows batch file for an explanation of operator & and meaning of if not errorlevel 1.
This can be fixed very easily using %errorlevel% and an IF statement.
Original script by Jelle Geerts.
#ECHO OFF
:Search
ping -n 1 "xxx.xxx.xxx.xx" | findstr /r /c:"[0-9] *ms"
if %errorlevel% == 0 (
echo Device was found!
start airsiren.wav
pause.
) else (
goto Search
)
My solution:
#echo off &:: modem_tester_xp+.bat
REM original https://www.elektroda.pl/rtvforum/topic2917839.html
setlocal EnableDelayedExpansion
rem set connection name (for newer than Win XP) from Network Connections (preferred name doesn't have space)
set _connection_name=internet
rem make file which close this script
echo #echo.^>"%~dpn0.exit"^&#del /q "%%~f0">"%~dp0close_%~nx0"
for /f "tokens=2-4 delims==." %%a in ('wmic os get Version /value ^|find "="') do if "%%~c" neq "" set "_system_version=%%~a.%%~b"
set "_con_ip="
set "_my_ip.last="
:start
::-n (seconds+1)
ping 127.0.0.1 >nul -n 3
set "_my_ip="
if not defined _con_ip call :get_con_ip "%_connection_name%"
if defined _con_ip for /f "tokens=3-5 delims= " %%p in ('route print ^|find " 0.0.0.0 "') do if "%%~r" neq "" if /i "%%~p"=="%_con_ip%" ( set "_my_ip=%%~p" ) else if /i "%%~q"=="%_con_ip%" set "_my_ip=%%~q"
rem if connection lost clean variable _my_ip.last
if not defined _my_ip (
set "_con_ip="
set "_my_ip.last="
) else if /i "%_my_ip%" neq "%_my_ip.last%" (
rem remember last connection addres
set "_my_ip.last=%_my_ip%"
call :2run
)
if not exist "%~dpn0.exit" goto start
del /q "%~dpn0.exit"
endlocal
goto :eof
:get_con_ip &::ConnectionName:return variable _con_ip
if "%_system_version%"=="5.1" (
rem XP find modem address
for /f "tokens=2 delims== " %%a in ('netsh diag show gateway WAN* ^|find "." ^|find "="') do if "!_con_ip!"=="" set "_con_ip=%%~a"
) else (
rem if newer works like win7, if not: if "%_system_version%"=="6.1" (rem Windows 7
if "%~1" neq "" for /f "tokens=1,4* delims= " %%n in ('netsh interface ipv4 show interfaces ^|find /i "%~1"') do if "!_con_ip!"=="" if /i "%%~p"=="%~1" for /f "tokens=1* delims=:" %%i in ('netsh interface ipv4 show addresses %%~n ^|find "." ^|find /i "ip"') do if "!_con_ip!"=="" set "_con_ip=%%~j"
if "!_con_ip!" neq "" set "_con_ip=!_con_ip: =!"
)
goto :eof
:2run
rem run external
rem start "modem started" /min /b cmd /c "echo %date% %time% '%_my_ip%'&pause"
start airsiren.wav
There are two problems with your code
Your code will unconditionally goes to the beginning even after the phone is connected, so it repeats playing the sound. You could use ... && (start airsiren.wav & goto :EOF) to terminate the batch file or use another label other than :EOF to do something else. But this doesn't give you the option to keep monitoring the phone for disconnection and re-connection.
You have to check the setting of the default media player (Typically Windows Media Player) and make sure that it is not set to continuously loop or repeat the media. Also it is overkill and somewhat inconvenient to launch a full fledged media player just for playing back a short notification sound, and usually you have to close the media player afterwards.
So this is the code I propose which solves the above mentioned obstacles by providing the option to continuously monitor the phone's connection status and also provide a more programmatic way to play the notification sound in a self contained player by using a hybrid BAT/JSCript solution.
#if (#Code)==(#BatchScript) /* Hybrid BAT/JScript line */
#echo off
setlocal EnableExtensions DisableDelayedExpansion
set #PlaySound=start "" /b cscript //nologo //e:JScript "%~f0"
set "SoundFile.Connect=%SystemRoot%\media\ringout.wav"
set "SoundFile.Disconnect=?"
set "GenFail.Localized.Text=General failure"
:: set to 0 to disable continuous connection monitoring
set "ContinuousMonitoring=1"
set "PhoneIP=xxx.xxx.xxx.xxx"
set "Timeout=3000"
setlocal EnableDelayedExpansion
set "CheckGeneralFailure=1"
echo [%TIME%] Waiting for connection...
:WaitForConnection
ping -n 1 %PhoneIP% -w %Timeout% | findstr "TTL" >nul && (
echo [!TIME!] Phone Connected.
!#PlaySound! "!SoundFile.Connect!"
if %ContinuousMonitoring% NEQ 0 goto :MonitorConnection
goto :EOF
) || (
if !CheckGeneralFailure! NEQ 0 (
ping -n 1 %PhoneIP% -w 100 | findstr /i /c:"%GenFail.Localized.Text%" >nul && (
ping -n 1 -w %Timeout% 127.255.255.255 >nul
(call,) %= Set errorlevel to 0 =%
) || set "CheckGeneralFailure=0"
)
goto :WaitForConnection
)
:MonitorConnection
ping -n 1 %PhoneIP% | findstr "TTL" >nul && (
ping -n 1 -w %Timeout% 127.255.255.255 >nul
goto :MonitorConnection
) || (
echo [!TIME!] Phone Disconnected.
echo [!TIME!] Waiting for connection...
set "CheckGeneralFailure=1"
REM Play another sound for disconnect?
goto :WaitForConnection
)
goto :EOF
/*** End of batch code ***/
#end
/*** JScript Sound Player ***/
var wmpps = {
Undefined : 0,
Stopped : 1,
Paused : 2,
Playing : 3,
ScanForward : 4,
ScanReverse : 5,
Buffering : 6,
Waiting : 7,
MediaEnded : 8,
Transitioning : 9,
Ready : 10,
Reconnecting : 11,
Last : 12
};
var SoundFile;
if (WScript.Arguments.length) SoundFile = WScript.Arguments(0);
var WaitCount = 0;
var objPlayer = new ActiveXObject("WMPlayer.OCX.7");
with(objPlayer) {
URL = SoundFile;
settings.volume = 100;
settings.setMode("loop", false);
controls.play();
while(playState == wmpps.Transitioning) {
WaitCount+=1;
if (WaitCount > 200) break;
WScript.Sleep(10);
}
if (playState == wmpps.Playing) {
while(playState != wmpps.Stopped) WScript.Sleep(1000);
}
close();
}
AIMS:
Learn how to use empty variables in a FOR LOOP routine in a batch file.
PROBLEM:
I am using whether a variable is defined or not to determine the appropriate subroutine in my script; 2 variables defined == go do something. One is defined but not the other == do something else. Both not defined == something else again.
The script checks for C$ access and the presence of a certain file within the C$ of a text file list of networked PC's. If both criteria are met by 2 variables having data set, a simple xcopy updates the file in question by going to a certain subroutine and then the LOOP moves to the next PC on the network to try and do the same.
If there is an issue I want to use the variables in an empty state to then do something else; for example report to text file that c$ was not accessible or the file was missing meaning bad install etc.
However on my 2 test machines I am breaking the folder paths to trip the error reporting routines and finding something strange I can't fix without writing more lines of code. In my text file I have 2 PC's listed a few times e.g.
PC1
PC2
PC1
PC2
PC1
PC2
PC1 has a broken file path to test error logging
PC2 All fine to test file update process
When I run the script PC1 gets reported as having a problem and logs correctly.
PC2 all is fine and the update happens fine. BUT THEN it hits PC1 again, but seems to think [even though file path still broken] that it is OKAY --as if the variable is remembered from the previous loop and of course tries to update and has problems.
Here is the code I was trying to get to work using empty variable
#echo off
color 0E
pushd %~dp0
setlocal EnableDelayedExpansion
for /f "usebackq tokens=*" %%i in ("%~dp0hostnames.txt") do (
rem Test Access Admin Shares C$
if exist "\\%%i\C$\Windows\System32" set dollar=yes
rem Test Installation Integrity
if exist "\\%%i\C$\ProgramData\config.cfg" set install=ok
echo %%i
echo !dollar!
echo !install!
pause
IF !dollar!==yes IF !install!==ok (call :updatecfg %%i)
IF !dollar!==yes IF [!install!]==[] (call :installerror %%i)
IF [!dollar!]==[] (call :errorshare %%i)
)
echo THE END
pause
exit
:updatecfg
CLS
XCOPY "%~dp0config.cfg" /Y "\\%1\C$\ProgramData" & echo %1 Update Config.cfg Succeeded! & echo %1 Update Succeeded! >>"%~dp0logpass.txt"
ping 127.0.0.1 -n 3 >nul
goto :eof
:errorshare
CLS
echo.
echo %1 Has C$ Access Issues [Logging] & echo %1 Has C$ Access Issues >>"%~dp0logfail.txt"
ping 127.0.0.1 -n 3 >nul
goto :eof
:installerror
CLS
echo.
echo %1 Cannot Find Config.cfg^!^! [Logging] & echo %1 Cannot Find Config.cfg^!^! Not Installed or Configured^? >>"%~dp0logfail.txt"
ping 127.0.0.1 -n 4 >nul
goto :eof
If I add if not exist entried to the 2 at the start and have them set something when there is a problem then this works fine. But I'd like to know if this the right way to do this or should I also be able to use empty variables. I am nearly there it's just that they are not clearing properly per loop.
Many thanks.
....
for /f "usebackq delims=" %%i in ("%~dp0hostnames.txt") do (
rem Clear variables for each iteration
set "dollar="
set "install="
rem Test Access Admin Shares C$
if exist "\\%%i\C$\Windows\System32" set "dollar=yes"
rem Test Installation Integrity
if exist "\\%%i\C$\ProgramData\config.cfg" set "install=ok"
if defined dollar (
if defined install (
call :updatecfg %%i
) else (
call :installerror %%i
)
) else (
call :errorshare %%i
)
)
....
or
....
for /f "usebackq delims=" %%i in ("%~dp0hostnames.txt") do (
rem Test Access Admin Shares C$
if exist "\\%%i\C$\Windows\System32" ( set "dollar=yes" ) else ( set "dollar=" )
rem Test Installation Integrity
if exist "\\%%i\C$\ProgramData\config.cfg" ( set "install=ok" ) else ( set "install=" )
if defined dollar (
if defined install (
call :updatecfg %%i
) else (
call :installerror %%i
)
) else (
call :errorshare %%i
)
)
....
In any case, you should ensure the variables have the adecuated value before taking a decision based on their content.
Been wrecking my brain all night trying to figure out why this isn't working, but one of my variables isn't releasing on the next iteration of my loop and I can't figure out why... The first pass of the loop seems to work fine, but the next iteration, the first variable gets locked and the script connects to the system that's already been configured.
I've been staring at this for a while now and no matter how I approach it, it still behaves badly. :/ The purpose is to read a text-string of a given file, and use it to modify (via Find and Replace (fnr.exe)) another file with several instances of the required data. I didn't have alot of luck with 'findstr' replacing so many instances of the text required so I went with a tool I've used before that seemed to work really well in it's previous scripting application...
Truth be told, I find myself stumbling with even the most basic code a lot of times, so any kind soul willing to impart some wisdom/assistance would be greatly appreciated!
Thanks in advance...
#ECHO ON
setlocal enabledelayedexpansion
> "%~dp0report.log" ECHO Batch Script executed on %DATE% at %TIME%
rem read computer list line by line and do
FOR /F %%A in (%~dp0workstations.txt) do (
SET lwn=
SET WKSTN=%%A
rem connect to workstation and read lwn.txt file
pushd "\\%WKSTN%\c$\"
IF ERRORLEVEL 0 (
FOR /F %%I in (\\%wkstn%\c$\support\lwn.txt) DO (
SET LWN=%%I
%~dp0fnr.exe --cl --dir "\\%WKSTN%\c$\support\folder\config" --fileMask "file.xml" --find "21XXXX" --replace "%%I"
IF ERRORLEVEL 0 ECHO Station %LWN%,Workstation %WKSTN%,Completed Successfully >> %~dp0report.log
IF ERRORLEVEL 1 ECHO Station %LWN%,Workstation %WKSTN%, A READ/WRITE ERROR OCCURRED >> %~dp0report.log
echo logwrite error 1 complete
popd
)
)
IF ERRORLEVEL 1 (
ECHO ,,SYSTEM IS OFFLINE >> %~dp0report.log
)
popd
set wkstn=
set lwn=
echo pop d complete
)
msg %username% Script run complete...
eof
The ! notation must be used on all variables that are changed inside the loop.
C:>type looptest.bat
#ECHO OFF
setlocal enabledelayedexpansion
rem read computer list line by line and do
FOR /F %%A in (%~dp0workstations.txt) do (
SET WKSTN=%%A
ECHO WKSTN is set to %WKSTN%
ECHO WKSTN is set to !WKSTN!
pushd "\\!WKSTN!\c$\"
ECHO After PUSHD, ERRORLEVEL is set to %ERRORLEVEL%
ECHO After PUSHD, ERRORLEVEL is set to !ERRORLEVEL!
IF !ERRORLEVEL! NEQ 0 (
ECHO ,,SYSTEM IS OFFLINE
) ELSE (
ECHO Host !WKSTN! is available
)
popd
)
EXIT /B 0
The workstations.txt file contained the following. (I should not give out actual host names.)
LIVEHOST1
DEADHOST1
LIVEHOST2
The output is...
C:>call looptest.bat
WKSTN is set to
WKSTN is set to LIVEHOST1
After PUSHD, ERRORLEVEL is set to 0
After PUSHD, ERRORLEVEL is set to 0
Host LIVEHOST1 is available
WKSTN is set to
WKSTN is set to DEADHOST1
The network path was not found.
After PUSHD, ERRORLEVEL is set to 0
After PUSHD, ERRORLEVEL is set to 1
,,SYSTEM IS OFFLINE
WKSTN is set to
WKSTN is set to LIVEHOST2
After PUSHD, ERRORLEVEL is set to 0
After PUSHD, ERRORLEVEL is set to 0
Host LIVEHOST2 is available
Although your code have several issues, the main one is the use of % instead of ! when you access the value of variables modified inside a for loop (although you already have the "enabledelayedexpansion" part in setlocal command). However, I noted that you sometimes use the FOR replaceable parameter (like in --replace "%%I") and sometimes you use the variable with the same value (%LWN%), so a simpler solution in your case would be to replace every %VAR% with its corresponding %%A for parameter.
I inserted this modification in your code besides a couple small changes that make the code simpler and clearer.
#ECHO ON
setlocal
> "%~dp0report.log" ECHO Batch Script executed on %DATE% at %TIME%
rem Read computer list line by line and do
FOR /F %%A in (%~dp0workstations.txt) do (
rem Connect to workstation and read lwn.txt file
pushd "\\%%A\c$\"
IF NOT ERRORLEVEL 1 (
FOR /F "usebackq" %%I in ("\\%%A\c$\support\lwn.txt") DO (
%~dp0fnr.exe --cl --dir "\\%%A\c$\support\folder\config" --fileMask "file.xml" --find "21XXXX" --replace "%%I"
IF NOT ERRORLEVEL 1 (
ECHO Station %%I,Workstation %%A,Completed Successfully >> %~dp0report.log
) ELSE (
ECHO Station %%I,Workstation %%A, A READ/WRITE ERROR OCCURRED >> %~dp0report.log
echo logwrite error 1 complete
)
)
) ELSE (
ECHO ,,SYSTEM IS OFFLINE >> %~dp0report.log
)
popd
echo pop d complete
)
msg %username% Script run complete...
I have a list of computers that I want to make some things according to tcp connection status.
I'm trying to check tcp connection and if errorlog is "1" so write line to log and skip to next computer.
The problem is that when a computer has no tcp connection the goto skip_action command takes the script to the end and exit and the other computers in the list left unprocessed.
I have also tried to use goto :eof and it terminates the script unexpected.
ipst.txt file:
1 10.1.1.10
3 10.1.3.10
8 10.1.3.10
This is the batch file code:
#echo off
setlocal enabledelayedexpansion
set computerslist=ipst.txt
for /f "usebackq tokens=1,2" %%A in ("%Computerslist%") do (
cls
set Station_Num=%%A
set Comp_IP=%%B
ping !Comp_IP! -n 1 | findstr "TTL"
if !errorlevel!==1 (
echo Station !Station_Num! .... !Comp_IP! ..................... No Communication.>>%log%
goto skip_action
)
echo Getting Administrator Credentials:
net use \\!Comp_IP! /USER:WORKGROUP\****** ******
echo.
xcopy file.txt \\!Comp_IP!\c\temp\
echo Disconneting Session From Remote Computer :
net use \\!Comp_IP! /DELETE /YES
:skip_action
echo end of working on !Station_Num!
)
echo end of script
The problem here is that GOTO cancels the for loop.
But you can simply enclose your action in an ELSE block
for /f "usebackq tokens=1,2" %%A in ("%Computerslist%") do (
cls
set Station_Num=%%A
set Comp_IP=%%B
ping !Comp_IP! -n 1 | findstr "TTL"
if !errorlevel!==1 (
echo Station !Station_Num! .... !Comp_IP! ..................... No Communication.>>%log%
) Else (
echo Getting Administrator Credentials:
net use \\!Comp_IP! /USER:WORKGROUP\****** ******
echo.
xcopy file.txt \\!Comp_IP!\c\temp\
echo Disconneting Session From Remote Computer :
net use \\!Comp_IP! /DELETE /YES
)
echo end of working on !Station_Num!
)
General form of if - else statement
If condition (
Statements
) else (
Statements to be executed if condition is not met
)
Make your call from the loop
You can have a function ping .. and parse variable references to it .. the preceding code could also be rendered as %%a and %%b being the first and second argument respectively -- in your function call ...
Call :pingcomputers %%a %%b
This way you avoid set altogether
:pingcomputers
Rem Pinging computer %~1
Ping %~2 ¦ find "reply"
If errorlevel 1 goto failed
(Actions to be performed if ping wa successful)
Assuming that your script has a label failed and actions to.be performed if error level is not 0 ..
Not much of a script but hope it helps ...