Say that I have a file with the below format
<records count="n">
record line 1
record line 2
.
.
.
record line n
</records>
I'll have to open this file and change the value of n to another value based on some logic. After change my file should look like.
<records count="m">
record line 1
record line 2
.
.
.
record line n
</records>
I can open the file in OPEN I-O mode and change the first line using the REWRITE option to replace the first line. But I don't want to use these methods. Is there a way to achieve the same logic using OPEN INPUT and OPEN OUTPUT mode and replace the line with WRITE method.
Is there a way to achieve the same logic using OPEN INPUT and OPEN
OUTPUT mode and replace the line with WRITE method[?]
No, that would leave you with only the <records count="m"> in the file. All other records would be lost!
As long as the length of the first record is the same, after changing n to m, REWRITE is the most straight forward way to update that record.
Perhaps, if you explain why you want to use WRITE, there may be something else that could be done.
If the file is not 'too' large, read all the records into memory, change the first record, then write all the records to the file.
If the file is 'too' large, copy the file changing the first record, delete the first file, then rename the copy.
Perhaps less efficient for 'too' large, sort the file by adding a sequence number and changing the first record. This simply uses the sort file to hold the data, temporarily. Possibly a poor choice for a program to be converted.
You need to define what the limit for 'too' is.
There are non-standard routines for file access in Micro Focus, but those might be more difficult to convert.
Related
Is there a way to get a specific line inside a text file without iterating line-by-line in C?
for example I have this text file names.txt it contains the following names below;
John
James
Julia
Jasmine
and I want to access 'Julia' right away without iterating through 'John' and 'James'?, Something like, just give the index value of '2' or '3' to access 'Julia' right away.
Is there a way to do this in C?
I just want to know how because I want to deal with a very large text file something like in about 3 billion lines and I want to access a specific line in there right away and iterating line-by-line is very slow
You have to at least once iterate thru all lines. In this iteration, before reading a line, you record the position in the file and save it to an array or to another file (Usually named an index file). The file shall have a fixed record size that is good for storing the position off the line in the text file.
Later, when you want to access a give line, you either use the array to get the position (Line number is the array index) or the file (You seek into the file to offset line number of record size) and read the position. Once you get the position, you can see into the text file to that position and read the line.
Each time the text file is updated, you must reconstruct the array or index file.
There are other way to do that, but you need to better explain the context.
I'm writing a small program in C and I want to have the option of saving data to file and then reading it from that file. The data is BIG, so I want to somehow dynamically write to a file without having to create a new file and copy modified old file into it.
Here's exactly what I want to do:
In the first line, I want to have "description" of the data in the form "%s %s %s ... %s \n" where %s is a string and the n'th string describes data in n+1'th line. I want to read the 1'st line of the file, scan for corresponding "description" string, and if it is not present, append it to the first line, and the data corresponding to it after the last line of the file.
The question is - is it possible to "jump" into lines in the file without scanning all the previous lines, and can I somehow read the first line of the file and append something to it after reading? Or maybe it is not the way to go in this situation and C offers some kind of different solution?
What you want can be done using stdio and fseek(). As long as you know at what byte offset you want to go, you can overwrite and/or append anywhere in the file without reading the data before, or the data you're overwriting. What you can not easily do is insert data, i.e., open the file, split it in half and put data in between.
Not too sure if that is what you mean though...
I have opened a file using a and r+ but when I use fseek and ftell the file pointer is always 0.
My file looks like this:
1 -3
2 -8
And I want to add another line between the two but it is added in the end after the last line.
Someone in another forum said that when you open the file in append the pointer is always zero and you have to open it in r+ and if that doesn't work "you have to read the complete data and then insert the data in the variables and write it back." but I don't understand what they mean by that.
Can anyone help with inserting numbers in the middle of a file?
Thanks!
Would something like this work?
To transfer the data?
rewind(fp);
fscanf(fp,"%d",&ch);
fprintf(fp1,"%d",ch);
fseek(fp,1,0);
fscanf(fp,"%d",&ch);
fprintf(fp1,"%d",ch);
Like others already said, there's no easy way to insert data in the middle of a file. If you really want to do this, you can implement the following steps:
Create a second file
Copy all data before the place you want to insert to the second file
Insert the line you want to the second file
Copy the remaining data to the second file
Delete the original file
Rename the second file
Other approach is using binary files instead of text files. Although binary files are a bit harder to learn, once you understand how they work you'll see that working with them is much like working with arrays. To perform this task, for example, you'd not even need to use an auxiliary file.
There is no open mode that will allow you to "insert" data into a file at a random point. The only place you can add data without overwriting existing data is the end of the file (what you get opening with mode "a").
If you want to insert at a random position, you need to do it yourself.
One of the easier ways is to re-write the file completely (transfer the start of the old file to a new file, add your data to the new file, transfer the rest of the old file, and rename/overwrite at the end).
The hard way: you need to "shift" all the data from your insertion point to the end-of-file manually. That's not trivial to get right.
There isn't an easy way to insert data in the middle of the file. A file is basically an array of characters. To add a character in the middle, you need to copy everything following your insertion point down one location. With a file you need to read the data that follows and write it after your addition.
Generally, when you want to do something like this you create a new file. You copy the old file into it up to the point where you want to insert, then you write the data you want to insert, then you copy the rest of the old file. Finally, you rename the new file to the old file.
I am reading info (numbers) from a txt file and after that I am adding to those numbers, others I had in another file, with the same structure.
At the start of each line in the file is a number, that identifies a specific product. That code will allow me to search for the same product in the other file. In my program I have to add the other "variables" from one file to the other, and then replace it, in the same place in one of those files.
I didn't open any of those files with a or a+, I did it with r and r+ because i want to replace the information in the lines that may be in the middle of the file, and not in the end of it.
The program compiles, and runs, but when it comes to replace the info in the file, it just doesn't do anything.
How should I resolve the problem?
A program can replace (overwrite) text in the middle of the file. But the question is whether or not this should be performed.
In order to insert larger text or smaller text (and close up the gap), a new text file must be written. This is assuming the file is not fixed width. The fundamental rule is to copy all original text before the insertion to a new file. Write the new text. Finally write the remaining original text. This is a lot of work and will slow down even the simplest programs.
I suggest you design your data layout before you go any further. Also consider using a database, see my post: At what point is it worth using a database?
Your objective is to design the data to minimize duplication and data fetching.
I've got a service which runs all the time and also keeps a log file. It basically adds new lines to the log file every few seconds. I'm written a small file which reads these lines and then parses them to various actions. The question I have is how can I delete the lines which I have already parsed from the log file without disrupting the writing of the log file by the service?
Usually when I need to delete a line in a file then I open the original one and a temporary one and then I just write all the lines to the temp file except the original which I want to delete. Obviously this method will not word here.
So how do I go about deleting them ?
In most commonly used file systems you can't delete a line from the beginning of a file without rewriting the entire file. I'd suggest instead of one large file, use lots of small files and rotate them for example once per day. The old files are deleted when you no longer need them.
Can't be done, unfortunately, without rewriting the file, either in-place or as a separate file.
One thing you may want to look at is to maintain a pointer in another file, specifying the position of the first unprocessed line.
Then your process simply opens the file and seeks to that location, processes some lines, then updates the pointer.
You'll still need to roll over the files at some point lest they continue to grow forever.
I'm not sure, but I'm thinking in this way:
New Line is a char, so you must delete chars for that line + New Line char
By the way, "moving" all characters back (to overwrite the old line), is like copying each character in a different position, and removing them from their old position
So no, I don't think you can just delete a line, you should rewrite all the file.
You can't, that just isn't how files work.
It sounds like you need some sort of message logging service / library that your program could connect to in order to log messages, which could then hide the underlying details of file opening / closing etc.
If each log line has a unique identifier (or even just line number), you could simply store in your log-parsing the identifier until which you got parsing. That way you don't have to change anything in the log file.
If the log file then starts to get too big, you could switch to a new one each day (for example).