I have a flask app that used to run with python3.5 on apache2.
I am now trying to change it to run on 3.6 (i have sone type hinting in my code that is only supported on 3.6).
I have installed the module for python3.6, but when tried to restart apache and run my app, it fails.
When running
mod_wsgi-express module-location
I have the python3.5 version
/usr/local/lib/python3.5/dist-packages/mod_wsgi/server/mod_wsgi-py35.cpython-35m-x86_64-linux-gnu.so
The same file also existis on my server in python3.6 dir.
I also changed my $PATH to run python3.6 as a default for python.
How can I tell apache to run on python3.6 and not on 3.5?
WOHA! It's working!
I uninstalled the mod_wsgi (sudo apt get remove libapache2-mod-wsgi).
Then, Installed the module via pip specifically to python3.6 (python3.6 -m pip install mod_wsgi), but at this point the apache still ran python3.5.I added to the apache configuration file (in ubunutu 16.4 the file is located at: /etc/apache2/apache2.conf and /usr/local/lib64/python3.6/site-packages/mod_wsgi/server/mod_wsgi-py36.cpython-36m-x86_64-linux-gnu.so for RHEL/CentOS 7) the followings:
LoadModule wsgi_module "/usr/local/lib/python3.6/dist-packages/mod_wsgi/server/mod_wsgi-py36.cpython-36m-x86_64-linux-gnu.so"
and
WSGIPythonHome "/usr" and that did the trick.
I weeped a lot of tears over this issue, finding the apache2.conf file etc, so hopefully this will be helpful to anyone.
The LoadModule solution worked for me. However, I found it easiest to first ensure
a2dismod wsgi as provided by the default apache2 module. I spent 3 days looking at various solutions and answers and reviewing Graham's WSGI guide.
What I did in my case is was to remove python 3.6 from Django env and re-install python 3.5 and it worked.
Related
i need help. currently i want to use PHP redis on my macOS from this repo https://github.com/phpredis/phpredis
because there are many error when i direct clone from that repository, i decided to choose install the phpredis use MacPorts.
my specification mac is
macOS Cataline v 10.15.7
PHP 7.3.11
i'm using XAMPP 7.4.12
after i install the macPorts i did run this command
sudo port install php73-redis
the installation was good and no error. after that i restart my apache and also restart my mac.. but when i check on phpinfo() no function redis..
i also check on my file /opt/local/var/db/php73/redis.ini also contain extension=redis.so
what is missing from my steps? i still not able to set the PHPredis after that. please help
I attempted to upgrade my tcms-api library from 5.0 to 5.3 using:
pip install tcms-api --upgrade
on a Windows 10 machine, I saw a lot of errors when trying to install the dependent package of kerberos. Even though this is old, I saw a similar set of errors. The package installation failed since the kerberos package isn't supported on Windows and I was left at tcms-api 5.0.
Please file a bug against https://github.com/kiwitcms/tcms-api.
We can do a quick fix by providing 2 package names:
tcms-api and tcms-api[kerberos]
The first one will not install the kerberos package.
The proposed workaround makes sense but changing the underlying kerberos implementation needs careful testing which isn't a quick job.
OTOH https://github.com/kiwitcms/python-social-auth-kerberos uses gssapi which seems to be the latest and most actively maintained implementation of Kerberos for Python. There is an open issue to migrate to that in tcms-api so you can contribute if you want.
As a workaround, I was able to do the following (caveat: I haven't extensively tested my installation yet):
Clone the tcms-api repo from GitHub
Edit setup.py to change the install_requires line to use 'kerberos-sspi' rather than 'kerberos'
Install the following pip packages: Setuptools, Wheel, Twine
CD to repo folder and run: python setup.py bdist_wheel
That creates a package under the dist folder
Run pip install dist\tcms_api-5.3-py3-none-any.whl
Celebrate successful package install
The steps were modified from this page.
Update:
I confirmed the things I need the API to do work with my custom package (create and update test runs). However, I'm in a situation where I don't need to specifically harden my Kiwi instance using kerberos authentication.
I've installed gcloud by following the instructions on:
https://cloud.google.com/sdk/docs/quickstart-debian-ubuntu
gcloud is in my path at /usr/bin/gcloud, but the package doesn't seem to have dev_appserver.py in my path. Is it installed? How do I run it?
Platform: Ubuntu 16.04
Edit: By running dpkg -L google-cloud-sdk I've found it at /usr/lib/google-cloud-sdk/bin/dev_appserver.py but when I try to run it I get:
This action requires the installation of components: [app-engine-
python]
You cannot perform this action because this Cloud SDK installation is
managed by an external package manager. If you would like to get the
Also not sure why it wasn't added to my path.
I know the original question concerns Ubuntu, but I just wanted to share some notes for macOS/OS X in case it's helpful for someone else.
I installed the google-cloud-sdk via Homebrew-Cask and overlooked the caveats note:
brew cask install google-cloud-sdk
After installing the SDK cask, I installed the Python App Engine component, as #Rodney Jonace mentioned:
gcloud components install -q app-engine-python
Going back to the caveats note mentioned above, I appended the following the my ~/.zshrc file:
source $(brew --prefix)/Caskroom/google-cloud-sdk/latest/google-cloud-sdk/path.zsh.inc
source $(brew --prefix)/Caskroom/google-cloud-sdk/latest/google-cloud-sdk/completion.zsh.inc
Opening a new terminal tab, I was able to call the extra Python App Engine scripts (e.g., dev_appserver.py) and use the Zsh completions. Hope that helps!
The following articles were also useful:
http://www.javatronic.fr/tips/2014/10/17/installing_google_cloud_sdk_on_ubuntu_with_oh-my-zsh.html
http://www.rainbowbreeze.it/how-to-setup-a-google-app-engine-python-environment-on-mac-osx-using-homebrew/
The google-cloud-sdk deb package comes with the built-in component manager disabled, which is preventing that copy of dev_appserver.py from working through gcloud. If you update your apt-cache, you can install the google-cloud-sdk-app-engine-python and/or google-cloud-sdk-app-engine-java packages that have just started to be published. Directions here:
https://cloud.google.com/sdk/downloads#apt-get
I am trying to install CKAN on my local computer using Ubuntu 14.04 LTS.
I followed the instructions for installing from source found here and I try to check if solr is running by visiting http://localhost:8983/solr/.
I can see that Jetty is running because when I visit http://localhost:8983 I see that it is up.
I added the jdk as follows:
JAVA_HOME=/usr/lib/jvm/java-1.6.0-openjdk-amd64
I am getting a 500 error when i try to open the solr page:
HTTP ERROR 500
Problem accessing /solr/index.jsp. Reason:
JSP support not configured
Powered by Jetty://
Any ideas? Should I redo the whole thing from the start?
Edit/Update
I just couldn't do anything with this installation. The bigger problem was that installation files were meshed up! I tried to install tomcat/solr instead of jetty/solr and things went sour. So I just created a VM and did a fresh install there. For anyone interested I did a tomcat/solr installation following this and a CKAN installation following this (with out of course the solr instructions). Also, for some reason the CKAN installation has commented out the solr URL, so even if it is right, I had to delete the comment.
A fix has been documented by #mstantoncook here [2939] & [1651] How to solr-jetty JSP support
Note the last comment, sudo service jetty restart
It's a Jetty BUG on Ubuntu 14.04!
There is nothing wrong with Ckan itself.
Actually, there is a bug in the libjetty-extra-java package (version 6.1.26 and newer) in Ubuntu 14.04. The bug was introduced after Jetty (in Ubuntu) has changed it's dependences from libtomcat6-java to libtomcat7-java.
You can get more info about this bug in Ubuntu Launchpad: Bug #1508562 "Broken symlinks for JSP support in libjetty-extra-java version 6.1.26-1ubuntu1.1".
The bug is already fixed on Debian, and I'm hope it will be solved in Ubuntu 14.04 soon.
There are workarounds that may work for your case
I proposed some workarounds in this bug report, and since they can be useful for the Ckan users, I'll also replicate them here.
All of them consist on use both jetty and libtomcat7-java, but adding/replacing some classes (code ported from libtomcat6, in put in the jsp-2.1-6.0.2.jar file) to the Jetty classpath.
I don't know if they have some problem. Use them at your own risk!
Workaround 1 - Install the fix package proposed by vshn
I found this workaround here: https://github.com/ckan/ckan/pull/2966
In short:
wget https://launchpad.net/~vshn/+archive/ubuntu/solr/+files/solr-jetty-jsp-fix_1.0.2_all.deb
dpkg -i solr-jetty-jsp-fix_1.0.2_all.deb
service jetty restart
This will install a JSP jar that works (the file will be named jsp-2.1-6.0.2.jar, but it contains classes ported from libtomcat6).
Workaround 2 - Manually install the JSP jar
Download the same JAR file that the DEB package above would install.
wget https://bugs.launchpad.net/ubuntu/+source/jetty/+bug/1508562/+attachment/4785985/+files/jsp-2.1-6.0.2.jar
Now, move it to a proper location inside the Jetty config dir. I did it this way:
mkdir /etc/jetty/extra-jars
mv jsp-2.1-6.0.2.jar /etc/jetty/extra-jars
And add a line like this one in the Jetty start.config file:
echo "/etc/jetty/extra-jars/jsp-2.1-6.0.2.jar" >> /etc/jetty/start.config
And:
service jetty restart
Correct solution
The correct solution is to wait for the Ubuntu Team solution. However, while waiting for this fix, you can use any of the previous workarounds (I prefer the last one).
I hope they help you!
Try this steps:
sudo mv jsp-2.1-6.0.2.jar /usr/share/jetty/lib/.
change own:
sudo chown root:root /usr/share/jetty/lib/jsp-2.1-6.0.2.jar
finally restart jetty:
sudo service jetty restart
I followed this steps and now I can see localhost:8983/solr and localhost/solr/admin
In Ubuntu 14.04 this can be fixed with:
cd /tmp
wget https://launchpad.net/~vshn/+archive/ubuntu/solr/+files/solr-jetty-jsp-fix_1.0.2_all.deb
sudo dpkg -i solr-jetty-jsp-fix_1.0.2_all.deb
sudo service jetty restart
Following http://docs.ckan.org/en/ckan-1.6/solr-setup.html#single-solr-instance
(this one a bit old, but worked perfect for me )
You will have to edit /etc/profile and add this line to the end such as this to the end (adjusting the path for your machine’s jdk install:
JAVA_HOME=/usr/lib/jvm/java-6-openjdk-amd64/ (or other version)
then
export JAVA_HOME
sudo service jetty start
I'm trying to install mod_perl on Centos 5.5 with Plesk. Does this already come with mod_perl? I'm not showing anything in the $ENV{MOD_PERL} variable.
I tried installing it via cpan (install mod_perl2) with this:
Please provide a full path to 'apxs' executable
which I don't know. So I skip it and then I am asked:
Please provide the location of the Apache directory:
Searched though I have, I can't seem to find it. No apache folder with ap_release.h.
Where would I find this or is there a better way to install it via plesk?
Thanks,
Jonathan
I was able to get mod_perl2 installed by:
>> yum install perl-devel
>> cpan
>> install YAML
>> install mod_perl2
Then, I configured it thanks to this: http://www.server-world.info/en/note?os=CentOS_6&p=httpd&f=9
I added a new <Directory> for my web site in case there would be a conflict with plesk.
/cgi-bin runs regular perl scripts
/mod-perl runs my scripts using mod_perl2... the $ENV{MOD_PERL} variable does exist here!
#oleg - thanks for your help, a2enmod perl does not work in CentOS
The Perl Support check box in Plesk doesn't seem to have any effect what-so-ever.
Does this already come with mod_perl?
Yes. Check any domain's hosting settings.
also you can check:
rpm -qa | grep perl
and I'm definitely recommend you use Plesk on Centos 6, because most things will be easier.