After I query through my database using Neo4J, I get a bunch of disjoint subgraphs like 'islands of nodes'.
What I want though is to get the most recent node for each 'island' (I have date values on each node).
How do I go about doing that?
Firstly you need to calculate yours islands like you said.
To di it yYou can check the neo4j-graph-algo with the procedure algo.unionFind : https://neo4j-contrib.github.io/neo4j-graph-algorithms/#_community_detection_connected_components
Then for each of your island, you have to order the nodes and take the first one.
Related
I am using AWS Neptune and I have to modify a certain property of a set of EDGEs with specific values. I also need this done in a single transaction. In AWS Neptune, manual transaction logic using tx.commit() and tx.rollback() is not supported. Which means I have to do this operation in a single traversal.
If I was to modify properties of vertices instead of edges, I could have got it done with a query similar to the following one:
g.V(<id 1>).property('name', 'Marko').V(<id 2>).property('name', 'Stephen');
This is because it is possible to select vertices by id in mid traversal, i.e. the GraphTraversal class has V(String ... vertexIds) as a member function.
But this is not the same for the case of edges. I am not able to select edges this way because E(String ... edgeIds) is not a member function of the GraphTraversal class.
Can somebody suggest the correct way I can solve this problem?
Thank you.
Amazon Neptune engine 1.0.1.0.200463.0 added Support for Gremlin Sessions to enable executing multiple Gremlin traversals in a single transaction.
However, you can do it also with a single query like this:
g.E('id1', 'id2', 'id3').coalesce(
has(id, 'id1').property('name','marko'),
has(id, 'id2').property('name','stephan'),
has(id, 'id3').property('name','vadas'))
You can get the same result as a mid traversal E() using V().outE().hasId(<list of IDs>)
I am using Gremlin/Tinkerpop 3 to query a graph stored in TitanDB.
The graph contains user vertices with properties, for example, "description", and edges denoting relationships between users.
I want to use Gremlin to obtain 1) users by properties and 2) the number of relationships (in this case of any kind) to some other user (e.g., with id = 123). To realize this, I make use of the match operation in Gremlin 3 like so:
g.V().match('user',__.as('user').has('description',new P(CONTAINS,'developer')),
__.as('user').out().hasId(123).values('name').groupCount('a').cap('a').as('relationships'))
.select()
This query works fine, unless there are multiple user vertices returned, for example, because multiple users have the word "developer" in their description. In this case, the count in relationships is the sum of all relationships between all returned users and the user with id 123, and not, as desired, the individual count for every returned user.
Am I doing something wrong or is this maybe an error?
PS: This question is related to one I posted some time ago about a similar query in Tinkerpop 2, where I had another issue: How to select optional graph structures with Gremlin?
Here's the sample data I used:
graph = TinkerGraph.open()
g = graph.traversal()
v123=graph.addVertex(id,123,"description","developer","name","bob")
v124=graph.addVertex(id,124,"description","developer","name","bill")
v125=graph.addVertex(id,125,"description","developer","name","brandy")
v126=graph.addVertex(id,126,"description","developer","name","beatrice")
v124.addEdge('follows',v125)
v124.addEdge('follows',v123)
v124.addEdge('likes',v126)
v125.addEdge('follows',v123)
v125.addEdge('likes',v123)
v126.addEdge('follows',v123)
v126.addEdge('follows',v124)
My first thought, was: "Do we really need match step"? Secondarily, of course, I wanted to write this in TP3 fashion and not use a lambda/closure. I tried all manner of things in the first iteration and the closest I got was stuff like this from Daniel Kuppitz:
gremlin> g.V().as('user').local(out().hasId(123).values('name')
.groupCount()).as('relationships').select()
==>[relationships:[:]]
==>[relationships:[bob:1]]
==>[relationships:[bob:2]]
==>[relationships:[bob:1]]
so here we used local step to restrict the traversal within local to the current element. This works, but we lost the "user" tag in the select. Why? groupCount is a ReducingBarrierStep and paths are lost after those steps.
Well, let's go back to match. I figured I could try to make the match step traverse using local:
gremlin> g.V().match('user',__.as('user').has('description','developer'),
gremlin> __.as('user').local(out().hasId(123).values('name').groupCount()).as('relationships')).select()
==>[relationships:[:], user:v[123]]
==>[relationships:[bob:1], user:v[124]]
==>[relationships:[bob:2], user:v[125]]
==>[relationships:[bob:1], user:v[126]]
Ok - success - that's what we wanted: no lambdas and local counts. But, it still left me feeling like: "Do we really need match step"? That's when Mr. Kuppitz closed in on the final answer which makes copious use of the by step:
gremlin> g.V().has('description','developer').as("user","relationships").select().by()
.by(out().hasId(123).values("name").groupCount())
==>[user:v[123], relationships:[:]]
==>[user:v[124], relationships:[bob:1]]
==>[user:v[125], relationships:[bob:2]]
==>[user:v[126], relationships:[bob:1]]
As you can see, by can be chained (on some steps). The first by groups by vertex and the second by processes the grouped elements with a "local" groupCount.
After working with neo4j and now coming to the point of considering to make my own entity manager (object manager) to work with the fetched data in the application, i wonder about neo4j's output format.
When i run a query it's always returned as tabular data. Why is this??
Sure tables keep a big place in data and processing, but it seems so strange that a graph database can only output in this format.
Now when i want to create an object graph in my application i would have to hydrate all the objects and this is not really good for performance and doesn't leverage true graph performace.
Consider MATCH (A)-->(B) RETURN A, B when there is one A and three B's, it would return:
A B
1 1
1 2
1 3
That's the same A passed down 3 times over the database connection, while i only need it once and i know this before the data is fetched.
Something like this seems great http://nigelsmall.com/geoff
a load2neo is nice, a load-from-neo would also be nice! either in the geoff format or any other formats out there https://gephi.org/users/supported-graph-formats/
Each language could then implement it's own functions to create the objects directly.
To clarify:
Relations between nodes are lost in tabular data
Redundant (non-optimal) format for graphs
Edges (relations) and vertices (nodes) are usually not in the same table. (makes queries more complex?)
Another consideration (which might deserve it's own post), what's a good way to model relations in an object graph? As objects? or as data/method inside the node objects?
#Kikohs
Q: What do you mean by "Each language could then implement it's own functions to create the objects directly."?
A: With an (partial) graph provided by the database (as result of a query) a language as PHP could provide a factory method (in C preferably) to construct the object graph (this is usually an expensive operation). But only if the object graph is well defined in a standard format (because this function should be simple and universal).
Q: Do you want to export the full graph or just the result of a query?
A: The result of a query. However a query like MATCH (n) OPTIONAL MATCH (n)-[r]-() RETURN n, r should return the full graph.
Q: you want to dump to the disk the subgraph created from the result of a query ?
A: No, existing interfaces like REST are prefered to get the query result.
Q: do you want to create the subgraph which comes from a query in memory and then request it in another language ?
A: no i want the result of the query in another format then tabular (examples mentioned)
Q: You make a query which only returns the name of a node, in this case, would you like to get the full node associated or just the name ? Same for the edges.
A: Nodes don't have names. They have properties, labels and relations. I would like enough information to retrieve A) The node ID, it's labels, it's properties and B) the relation to other nodes which are in the same result.
Note that the first part of the question is not a concrete "how-to" question, rather "why is this not possible?" (or if it is, i like to be proven wrong on this one). The second is a real "how-to" question, namely "how to model relations". The two questions have in common that they both try to find the answer to "how to get graph data efficiently in PHP."
#Michael Hunger
You have a point when you say that not all result data can be expressed as an object graph. It reasonable to say that an alternative output format to a table would only be complementary to the table format and not replacing it.
I understand from your answer that the natural (rawish) output format from the database is the result format with duplicates in it ("streams the data out as it comes"). I that case i understand that it's now left to an alternative program (of the dev stack) to do the mapping. So my conclusion on neo4j implementing something like this:
Pro's - not having to do this in every implementation language (of the application)
Con's - 1) no application specific mapping is possible, 2) no performance gain if implementation language is fast
"Even if you use geoff, graphml or the gephi format you have to keep all the data in memory to deduplicate the results."
I don't understand this point entirely, are you saying that these formats are no able to hold deduplicated results (in certain cases)?? So infact that there is no possible textual format with which a graph can be described without duplication??
"There is also the questions on what you want to include in your output?"
I was under the assumption that the cypher language was powerful enough to specify this in the query. And so the output format would have whatever the database can provide as result.
"You could just return the paths that you get, which are unique paths through the graph in themselves".
Useful suggestion, i'll play around with this idea :)
"The dump command of the neo4j-shell uses the approach of pulling the cypher results into an in-memory structure, enriching it".
Does the enriching process fetch additional data from the database or is the data already contained in the initial result?
There is more to it.
First of all as you said tabular results from queries are really commonplace and needed to integrate with other systems and databases.
Secondly oftentimes you don't actually return raw graph data from your queries, but aggregated, projected, sliced, extracted information out of your graph. So the relationships to the original graph data are already lost in most of the results of queries I see being used.
The only time that people need / use the raw graph data is when to export subgraph-data from the database as a query result.
The problem of doing that as a de-duplicated graph is that the db has to fetch all the result data data in memory first to deduplicate, extract the needed relationships etc.
Normally it just streams the data out as it comes and uses little memory with that.
Even if you use geoff, graphml or the gephi format you have to keep all the data in memory to deduplicate the results (which are returned as paths with potential duplicate nodes and relationships).
There is also the questions on what you want to include in your output? Just the nodes and rels returned? Or additionally all the other rels between the nodes that you return? Or all the rels of the returned nodes (but then you also have to include the end-nodes of those relationships).
You could just return the paths that you get, which are unique paths through the graph in themselves:
MATCH p = (n)-[r]-(m)
WHERE ...
RETURN p
Another way to address this problem in Neo4j is to use sensible aggregations.
E.g. what you can do is to use collect to aggregate data per node (i.e. kind of subgraphs)
MATCH (n)-[r]-(m)
WHERE ...
RETURN n, collect([r,type(r),m])
or use the new literal map syntax (Neo4j 2.0)
MATCH (n)-[r]-(m)
WHERE ...
RETURN {node: n, neighbours: collect({ rel: r, type: type(r), node: m})}
The dump command of the neo4j-shell uses the approach of pulling the cypher results into an in-memory structure, enriching it and then outputting it as cypher create statement(s).
A similar approach can be used for other output formats too if you need it. But so far there hasn't been the need.
If you really need this functionality it makes sense to write a server-extension that uses cypher for query specification, but doesn't allow return statements. Instead you would always use RETURN *, aggregate the data into an in-memory structure (SubGraph in the org.neo4j.cypher packages). And then render it as a suitable format (e.g. JSON or one of those listed above).
These could be a starting points for that:
https://github.com/jexp/cypher-rs
https://github.com/jexp/cypher_websocket_endpoint
https://github.com/neo4j-contrib/rabbithole/blob/master/src/main/java/org/neo4j/community/console/SubGraph.java#L123
There are also other efforts, like GraphJSON from GraphAlchemist: https://github.com/GraphAlchemist/GraphJSON
And the d3 json format is also pretty useful. We use it in the neo4j console (console.neo4j.org) to return the graph visualization data that is then consumed by d3 directly.
I've been working with neo4j for a while now and I can tell you that if you are concerned about memory and performances you should drop cypher at all, and use indexes and the other graph-traversal methods instead (e.g. retrieve all the relationships of a certain type from or to a start node, and then iterate over the found nodes).
As the documentation says, Cypher is not intended for in-app usage, but more as a administration tool. Furthermore, in production-scale environments, it is VERY easy to crash the server by running the wrong query.
In second place, there is no mention in the docs of an API method to retrieve the output as a graph-like structure. You will have to process the output of the query and build it.
That said, in the example you give you say that there is only one A and that you know it before the data is fetched, so you don't need to do:
MATCH (A)-->(B) RETURN A, B
but just
MATCH (A)-->(B) RETURN B
(you don't need to receive A three times because you already know these are the nodes connected with A)
or better (if you need info about the relationships) something like
MATCH (A)-[r]->(B) RETURN r
I'm using an MDX query to pull information to support a set of reports. A high degree of detail is required for the reports so they take some time to generate. To speed up the access time we pull the data we need and store it in a flat Oracle table and then connect to the table in Excel. This makes the reports refresh in seconds instead of minutes.
Previously the MDX was generated and run by department for 100 departments and then for a number of other filters. All this was done in VB.Net. The requirements for filters have grown to the point where this method is not sustainable (and probably isn't the best approach regardless).
I've built the entire dataset into one MDX query that works perfectly. One of my sets that I cross join includes members from three different levels of hierarchy, it looks like this:
(
Descendants([Merch].[Merch CHQ].[All], 2),
Descendants([Merch].[Merch CHQ].[All], 3),
[Merch].[Merch CHQ].[Department].&[1].Children
)
The problem for me is in our hierarchy (which I can't change), each group (first item) and each department (second item) have the same structure to their naming, ie 15-DeptName and it's confusing to work with.
To address it I added a member:
MEMBER
[Measures].[Merch Level] AS
(
[Merch].[Merch CHQ].CurrentMember.Level.Name
)
Which returns what type the member is and it works perfectly.
The problem is that it updates for every member so none of the rows get filtered by NON BLANK, instead of 65k rows I have 130k rows which will hurt my access performance.
Can my query be altered to still filter out the non blanks short of using IIF to check each measurement for null?
You can specify Null for your member based on your main measure like:
MEMBER
[Measures].[Merch Level] AS
IIf(IsEmpty([Measures].[Normal Measure]),null,[Merch].[Merch CHQ].CurrentMember.Level.Name)
That way it will only generate when there is data. You can go further and add additional dimensions to the empty check if you need to get more precise.
Background:
I need to store the following data in a database:
osm nodes with tags;
osm edges with weights (that is an edge between two nodes extracted from 'way' from an .osm file).
Nodes that form edges, which are in the same 'way' sets should have the same tags as those ways, i.e. every node in a 'way' set of nodes which is a highway should have a 'highway' tag.
I need this structure to easily generate a graph based on various filters, e.g. a graph consisting only of nodes and edges which are highways, or a 'foot paths' graph, etc.
Problem:
I have not heard about the spatial index before, so I just parsed an .osm file into a MySQL database:
all nodes to a 'nodes' table (with respective coordinates columns) - OK, about 9,000,000 of rows in my case:
(INSERT INTO nodes VALUES [pseudocode]node_id,lat,lon[/pseudocode];
all ways to an 'edges' table (usually one way creates a few edges) - OK, about 9,000,000 of rows as well:
(INSERT INTO edges VALUES [pseudocode]edge_id,from_node_id,to_node_id[/pseudocode];
add tags to nodes, calculate weights for edges - Problem:
Here is the problematic php script:
$query = mysql_query('SELECT * FROM edges');
$i=0;
while ($res = mysql_fetch_object($query)) {
$i++;
echo "$i\n";
$node1 = mysql_query('SELECT * FROM nodes WHERE id='.$res->from);
$node1 = mysql_fetch_object($node1);
$tag1 = $node1->tags;
$node2 = mysql_query('SELECT * FROM nodes WHERE id='.$res->to);
$node2 = mysql_fetch_object($node2);
$tag2 = $node2->tags;
mysql_query('UPDATE nodes SET tags="'.$tag1.$res->tags.'" WHERE nodes.id='.$res->from);
mysql_query('UPDATE nodes SET tags="'.$tag2.$res->tags.'" WHERE nodes.id='.$res->to);`
Nohup shows the output for 'echo "$i\n"' each 55-60 seconds (which can take more than 17 years to finish if the size of the 'edges' table is more than 9,000,000 rows, like in my case).
Htop shows a /usr/bin/mysqld process which takes 40-60% of CPU.
The same problem exists for the script which tries to calculate the weight (the distance) of an edge (select all edges, take an edge, then select two nodes of this edge from 'nodes' table, then calculate the distance, then update the edges table).
Question:
How can I make this SQL updates faster? Should I tweak any of MySQL config settings? Or should I use PostgreSQL with PostGIS extension? Should I use another structure for my data? Or should I somehow utilize the spatial index?
If I understand you right there is two things to discuss.
First, your idea of putting the highway-tag on the start and stop nodes. A node can have more than one edge connected, where to put the tag from the second edge? Or third or fourth if it is a crossing? The reason the highway tag is putted in the edges table in the first place is that from a relational point of view that is where it belongs.
Second, to get the whole table and process it outside the database is not the right way. What a relational database is really good at is taking care of this whole process.
I have not worked with mysql, and I fully agree that you will probably get a lot more fun if migrating to PostGIS since PostGIS has a lot better spatial capabilities (even if you don't need any spatial capabilities for this particular task) from what I have heard.
So if we ignore the first problem and just for showing the concept say that there is only two edges connected to one node and that each node has two tag-fields. tag1 and tag2. Then it could look something like this in PostGIS:
UPDATE nodes set tag1=edges.tags from edges where nodes.id=edges.from;
UPDATE nodes set tag2=edges.tags from edges where nodes.id=edges.to;
If you disable the indexes that should be very fast.
Again,
if I have understood you right.
PostgreSQL
Openstreetmap itself uses PostgreSQL, so I guess that's recommended.
See: http://wiki.openstreetmap.org/wiki/PostgreSQL
You can see OSM's database schema at: http://wiki.openstreetmap.org/wiki/Database_Schema
So you can use the same fields, fieldtypes and indexes that OSM uses for maximum compatibility.
MySQL
If you want to import .osm files into a MySQL database, have a look at:
http://wiki.openstreetmap.org/wiki/OsmDB.pm
Here you will find perl code that will create MySQL tables, parse a OSM file and import it into your MySQL database.
Making it faster
If you are updating in bulk, you don't need to update the indexes after every update.
You can just disable the indexes, do all your updates and re-enable the index.
I'm guessing that should be a whole lot faster.
Good luck