I create a folder in the qq page side, with javamail collected on the phone side found that the folder does not exist, breakpoint debugging found the following error.
I remember before it is possible, and now qq and Tencent E-mail are not, Netease me through the way under the test, no problem
oh,my god! what happend!
20171018 Resolve the update
Well, I found qq in the web side of the establishment of the folder are stored in the default "other folder" this directory, so the full name of the folder name should be "other folder / xxxfolerName" this form, so this is not javamail problem is qq side of the problem, QQ really wonderful work
Finally, thank you all.
Related
I was integrating an external bug tracker tool “Instabug” to Kiwi but when i tried to link a bug to the test case it shows invalid bug ID error.
For setting up the external bug tracking tool i performed the following steps:
ADMIN -> Everything Else -> TEST Cases -> Bug Trackers -> Add Bug Tracker -> Filled all the Details -> Save.
The fields which i am not sure about whether i filled them correct or not are :
(a) URL format string : https%3A%2F%2Fdashboard.instabug.com%2Fapplications%2FProjectname%2Fbeta%2Fbugs
(b) RegExp for ID validation : ^\d$
I am not sure whether the connection is established between Kiwi and Instabug.
I expect to know what are the correct values of
(a) URL format string
(b) RegExp for ID validation
and if i entered the wrong or right value in the bug tracker detail then it should show the connection with the bug tracker is established or not.
Also i am not sure if i have to make any changes in the “Instabug" site?
Kindly help me with the setup of “Instabug” with Kiwi.
a) Did you set Type to LinkOnly?
b) Connection status with tracker is not yet present - see https://github.com/kiwitcms/Kiwi/issues/97
c) Post relevant docker container logs.
The title of the question may be irrelevant to what I am trying to find out. My goal is to write a test that will
A) login to Hotmail
B) Delete the junk mail in my junk folder.
Design wise I have created 2 separate test classes. TestSignInPage1.class is only testing the user login part which is working and passed.
TestJunkFolderDelete.class will go to junk mail folder and do the deletion. I understand I simply can’t use the junk delete test on its own, a user 1st needs to login to the account so I called the TestSignInPage1 class in the junk folder.
#Test
public void testJunk(){
//The part below will get my login credential from TestSignPage class
TestSignInPage1 t= new TestSignInPage1();
t.testPage1();
//The following part will handle junk folder clean operation
WebDriver driver=br.openBrowser("firefox", "https://outlook.live.com/owa/?realm=hotmail.com&path=/mail/junkemail");
JunkMail jm= PageFactory.initElements(driver, JunkMail.class);
jm.doJunkClean();
Problem: Once the login part has been executed, the junk folder delete test opens up another new browser and again asks for login information.
Question: In professional world how would you tackle this (i.e.: you will have 1 test only, is there a way to keep the same session 1 browser) etc?
So I have a lot of instant message logs/history that I want to back up from my chat client, Cisco WebEx Connect in Windows 7. These are stored under C:\Users\\AppData\Local\WebEx Connect\Archive and the file is called "myemailaddress".db3
After downloading SQLiteBrowser to open this file, I get the error:
SQLiteManager: Error in opening file "myfile".db3 - either the file is encrypted or corrupt
Exception Name: NS_ERROR_FILE_CORRUPTED
Exception Message: Component returned failure code: 0x8052000b (NS_ERROR_FILE_CORRUPTED) [mozIStorageService.openUnsharedDatabase]
The file isn't corrupted so I'm thinking perhaps it is encrypted in some way - opening the file in Notepad displays random characters like the following, with no recognisable text:
=¢^£ÍV¶»ñû‡«–
`×ÚµÏýº°ÎîÎL
Besides that file which contains the actual messages, there is another small 20kb file under the folder ConnectDB that has various config settings (such as create CacheTable) and it says on the first line (when opened in Notepad): "SQLite format 3" - so clearly this one isn't encrypted.
Is there any way to extract the data from the first file to something readable (ie, text)? It's only around 5MB in size so shouldn't be causing any memory issues.
Unfortunately I haven't found a way for decrypting this file, however if you're still able to access the messenger client and have a live account you can still export them person by person by clicking on the person in question (make sure you've got view offline people enabled if you're retriving offline user's chat history) > click on the history tab > click on "save as".
I hope this is of use to you.
I used the example in this page to add a user to an Active Directory group, but I get an exception with the message "Server is unwilling to process the request" when executing
dirEntry.Properties["member"].Add(userDn);
I had a similar issue where I was trying to add a member to a group. Specifically trying to add a group to a group and getting the same helpful error 'The server is unwilling to process the request' The answer provided by the OP did not work for me.
For me, the reason I was unable to add a group to my group was because the group I was trying to add members to was a 'global' scoped group whereas it needed to be a 'universal' scoped group. Hope this helps someone.
This question took me a lot of time to solve. First of all, the error message looks like a joke. Second, there is nothing more, just that message.
Anyway, I managed to fix it by:
Making sure that userDn contains the whole path (e.g., "LDAP://server-address/CN=" + userDn + ",OU=optional,DC=your-domain,DC=com". This is actually very important, if you don't supply the full path it will throw an Exception from HRESULT: 0x80005000.
Replacing dirEntry.Properties["member"].Add(userDn); by entry.Invoke("Add", new object[] { userDn });
Then I wanted to remove a user and I expected entry.Invoke("Remove", new object[] { userDn }); to work. However, this devilish AD will only work if you use lower case "remove", so entry.Invoke("remove", new object[] { userDn }); worked for me.
I got this generic error message when my path did not match the forest domain name. For example, if my forest domain name is ad.example.com, and I am trying to create a group with path CN=Users,DC=example,DC=net one has .com the other has .net - they don't line up. I would need to correct my group to match. My group path should then be CN=Users,DC=example,DC=com.
ldapwiki.com describes potential causes for "The server is unwilling to process the request". Check ExtendedErrorMessage property of your exception to figure out what applies. In my case "00002145: SvcErr: DSID-031A1254, problem 5003 (WILL_NOT_PERFORM)". The following line resolved the issue:
ent.Properties["groupType"].Value = 8;
I had missed to set groupType and so attempted to nest a universal group in a global group. Find more information on groupType attribute in ldapwiki.com
Just look out, because the start of the .properties("distinguished Name") can be different than the .properties("cn"). If the user is created with a , or ; in the .properties("cn"), the start of the .properties("distinguished Name") will be the username with \, or \;.
This can give an error if u are trying to add a user you found by use of .properties("cn") to a Group.
After many days searching i find the problem. when you add user in group you must set "distinguished Name" not LDAP path.
You must write like this:
ent.Properties["member"].Add("CN=YourUserName,OU=optional,DC=yourdomain,DC=com");
This is wrong code:
ent.Properties["member"].Add("LDAP://CN=YourUserName,OU=optional,DC=yourdomain,DC=com");
Also when you do remove mast to save this rule
ent.Properties["member"].Remove("CN=YourUserName,OU=optional,DC=yourdomain,DC=com");
P.S. ent is DirectoryEntry object of group
Greetings,
Well I am bewildered. I have been tasked with updating a PHP script that uses the BulkAPI to upsert some data into the Opportunity entity.
This is all going well except that the Bulk API is returning this error for some clearly defined custom fields:
InvalidBatch : Field name not found : cv__Acknowledged__c
And similar.
I thought I finally found the problem when I discovered the WSDL version I was using was quite old (Partner WSDL). So I promptly regenerated the WSDL. Only problem? Enterprise, Partner, etc....all of them...do not include these fields. They're all coming from the Common Ground package and start with cv_
I even tried to find them in the object explorer in Workbench as well as the schema explorer in Force.com IDE.
So, please...lend me your experience. How can I update these values?
Thanks in advance!
Clif
Screenshots to prove I have the correct access:
EDIT -- Here is my code:
require_once 'soapclient/SforcePartnerClient.php';
require_once 'BulkApiClient.php';
$mySforceConnection = new SforcePartnerClient();
$mySoapClient = $mySforceConnection->createConnection(APP.'plugins'.DS.'salesforce_bulk_api_client'.DS.'vendors'.DS.'soapclient'.DS.'partner.wsdl.xml');
$mylogin = $mySforceConnection->login('redacted#redacted.com', 'redactedSessionredactedPassword');
$myBulkApiConnection = new BulkApiClient($mylogin->serverUrl, $mylogin->sessionId);
$job = new JobInfo();
$job->setObject('Opportunity');
$job->setOpertion('upsert');
$job->setContentType('CSV');
$job->setConcurrencyMode('Parallel');
$job->setExternalIdFieldName('Id');
$job = $myBulkApiConnection->createJob($job);
$batch = $myBulkApiConnection->createBatch($job, $insert);
$myBulkApiConnection->updateJobState($job->getId(), 'Closed');
$times = 1;
while($batch->getState() == 'Queued' || $batch->getState() == 'InProgress')
{
$batch = $myBulkApiConnection->getBatchInfo($job->getId(), $batch->getId());
sleep(pow(1.5, $times++));
}
$batchResults = $myBulkApiConnection->getBatchResults($job->getId(), $batch->getId());
echo "Number of records processed: " . $batch->getNumberRecordsProcessed() . "\n";
echo "Number of records failed: " . $batch->getNumberRecordsFailed() . "\n";
echo "stateMessage: " . $batch->getStateMessage() . "\n";
if($batch->getNumberRecordsFailed() > 0 || $batch->getNumberRecordsFailed() == $batch->getNumberRecordsProcessed())
{
echo "Failures detected. Batch results:\n".$batchResults."\nEnd batch.\n";
}
And lastly, an example of the CSV data being sent:
"Id","AccountId","Amount","CampaignId","CloseDate","Name","OwnerId","RecordTypeId","StageName","Type","cv__Acknowledged__c","cv__Payment_Type__c","ER_Acknowledgment_Type__c"
"#N/A","0018000000nH16fAAC","100.00","70180000000nktJ","2010-10-29","Gary Smith $100.00 Single Donation 10/29/2010","00580000001jWnq","01280000000F7c7AAC","Received","Individual Gift","Not Acknowledged","Credit Card","Email"
"#N/A","0018000000nH1JtAAK","30.00","70180000000nktJ","2010-12-20","Lisa Smith $30.00 Single Donation 12/20/2010","00580000001jWnq","01280000000F7c7AAC","Received","Individual Gift","Not Acknowledged","Credit Card","Email"
After 2 weeks, 4 cases, dozens of e-mails and phone calls, 3 bulletin board posts, and 1 Stackoverflow question, I finally got a solution.
The problem was quite simple in the end. (which makes all of that all the more frustrating)
As stated, the custom fields I was trying to update live in the Convio Common Ground package. Apparently our install has 2 licenses for this package. None of the licenses were assigned to my user account.
It isn't clear what is really gained/lost by not having the license other than API access. As the rest of this thread demonstrates, I was able to see and update the fields in every other way.
If you run into this, you can view the licenses on the Manage Packages page in Setup. Drill through to the package in question and it should list the users who are licensed to use it.
Thanks to SimonF's professional and timely assistance on the Developer Force bulletin boards:
http://boards.developerforce.com/t5/Perl-PHP-Python-Ruby-Development/Bulk-API-So-frustrated/m-p/232473/highlight/false#M4713
I really think this is a field level security issue. Is the field included in the opportunity layout for that user profile? Field level security picks the most restrictive option, so if you seem to have access from the setup screen but it's not included in the layout, I don't think the system will give you access.
If you're certain that your user's profile has FLS access to the fields and the assigned layouts include the fields, then I'd suggest looking into the definition of the package in question. I know the bulk API allows use of fields in managed packages normally (I've done this).
My best guess at this point is that your org has installed multiple versions of this package over time. Through component deprecation, it's possible the package author deprecated these custom fields. Take a look at two places once you've logged into salesforce:
1.) The package definition page. It should have details about what package version was used when the package was first installed and what package version you're at now.
2.) The page that has WSDL generation links. If you choose to generate the enterprise WSDL, you should be taken to a page that has dropdown elements that let you select which package version to use. Try fiddling with those to see if you can get the fields to show up.
These are just guesses. If you find more info, let me know, and I can try to provide additional guidance.