I am having a problem getting the default WinForms Chart control to work. I have a single chart with a single area. In this area, I want to display three (3) series whose labels are on a single legend.
Each of the value arrays shown in the code below contains six (6) values.
When I run the application the chart is only showing the background with the title and the name of the FIRST series I defined, the others seem to be ignored. Also, no grid and no data points or lines are displayed. The chart is basically blank.
this.chart.SuspendLayout();
this.chart.ChartAreas.Clear();
this.chart.Series.Clear();
ChartType chartType = ChartType.Column;
// prepare the area
const string AREA_NAME = "ChartAreaBP";
ChartArea bpChartArea = new ChartArea(AREA_NAME);
bpChartArea.AxisX.LabelStyle.Format = "dd/MMM\nyyyy";
bpChartArea.AxisX.MajorGrid.LineColor = System.Drawing.Color.LightGray;
bpChartArea.AxisY.MajorGrid.LineColor = System.Drawing.Color.LightGray;
bpChartArea.BackColor = System.Drawing.Color.LimeGreen;
bpChartArea.BackGradientStyle = GradientStyle.DiagonalRight;
bpChartArea.Position.Auto = true;
bpChartArea.InnerPlotPosition.Auto = true;
this.chart.ChartAreas.Add(bpChartArea);
// prepare the values. X is Date/time all other 3 are BYTE/INT
var xvals = from x in items select x.TimeStamp;
var yvalsSys = from y in items select y.Systolic;
var yvalsDia = from y in items select y.Diastolic;
var yvalsRhy = from y in items select y.Rhythm;
// The first series, other 2 omitted from HERE for simplicity
const string SYS_SERIES = "Systolic";
Series sysBPSeries = new Series(SYS_SERIES, 4);
sysBPSeries.ChartType = chartType;
sysBPSeries.ChartArea = AREA_NAME;
sysBPSeries.XValueType = ChartValueType.Auto;
sysBPSeries.YValueType = ChartValueType.Date;
sysBPSeries.XAxisType = AxisType.Primary;
sysBPSeries.YAxisType = AxisType.Primary;
sysBPSeries.Enabled = true;
this.chart.Series.Add(sysBPSeries);
this.chart.Series[SYS_SERIES].Points.DataBindXY(xvals, yvalsSys);
// here the other two series are defined.
But when I run the application only the legend of the FIRST series is shown even though the other two are defined in the code (I omitted them from this listing) just the same way as the first series.
And as I stated above, no grid nor values are shown. However, the chart shown in design mode does show all three labels on the first and only legend and all three lines.
Related
I am having one google sheet having more than 100 rows with column of "NAME, PLACE, PHONE". I want to change /correct the phone number on specific person Ex.John in the side bar (Form.html) and the correct place & phone number to be edit in that specific row of my google sheet "Phonelist". The code.gs given below which is not working. Could you lease rectify the same?
function sidebar() {
var html = HtmlService.createHtmlOutputFromFile("Form").setTitle('Phone Details');
SpreadsheetApp.getUi().sidebar(html);
}
function result(form) {
var ss = SpreadsheetApp.getActiveSpreadsheet();
var ws = ss.getSheetByName("Phonelist");
var data = ws.getDataRange().getValues();
var name = form.name;
var place = form.place;
var phone = form.phone;
for (var i = 1; i < data.length; i++) {
if(data[i][1] == "John"){
var result = [name,place,phone];
ws.getRange(dat[i]).setValue(result);
}
}
}
It is difficult to understand what you exactly need. But there are some issues which are visible.
ws.getRange(data[i])is not valid. See docs. You need a row and a column at least, and in your case also the number of columns since your are inserting a range. Currently you only have a column. The solution is `
const startColumn = 1 // start at column A
const numberOfRows = 1 // update one row at a time
const numberOfColumns = result.length // this will be 3
ws.getRange(data[i], startColumn, numberOfRows, result.length)
.setValues(result) // setValues is correct, setValue is incorrect
The second issue is that you said that NAME is in the first column, but your test is testing against the second column. Array start at 0, i.e. the first item is actual accessed by [0]. therefore your test if(data[i][1] == "John") actually checks if the second column PLACE is equal to "John". To fix this, replace the [1] with [0], so:
if(data[i][0] == "John")
The third issue is handled in the first answer. You are using setValue() which is only to be used to set one cell. But since you are setting a number of cells at one time, you should use setValues() instead.
I have a button which creates other buttons based on the class Clip seen below. Those newly created buttons are added to an array and stored in a plist.
class Clip: Encodable, Decodable {
var name: String = ""
var xCoordinate: Int = 100
var yCoordinate: Int = 300
// more parameter will be added later on e.g color, scale etc..
}
Each button can be moved around the view and the new x & y coordinates are stored in a plist.
#objc func handlePan(sender: UIPanGestureRecognizer){
let uIViewSelected = sender.view!
switch sender.state {
case .began, .changed :
moveViewWithPan(view: uIViewSelected, sender: sender)
break
case .ended:
//Finds the position when the button is no longer being dragged
let x = Int(uIViewSelected.center.x)
let y = Int(uIViewSelected.center.y)
//clipArray[0] need to be the corresponding clicked button e.g clipArray[2]
clipArray[0].xCoordinate = x
clipArray[0].yCoordinate = y
saveData()
break
default:
break
}
}
The above works only if I create one button. When more buttons are added, the above lines only change the first clip from the array. I need a way to update the value to the correct button clicked.
How can identify the array position of the click button as I am creating all them programmatically? At the moment I am placing at value 0 of the clipArray.
clipArray[0].xCoordinate = x
clipArray[0].yCoordinate = y
I am not even sure if using a plist is the best way to store the buttons in the first place.
Any help or documentation would be much appreciated.
Thanks
Following from dfd response, I added tags to each button which are created and it solved the issue for now.
let x = Int(uIViewSelected.center.x)
let y = Int(uIViewSelected.center.y)
//clipArray.append(clip)
var tagNo = uIViewSelected.tag
clipArray[tagNo].xCoordinate = x
clipArray[tagNo].yCoordinate = y
I'm trying to create a script that will automatically format a selection based on the formatting of a table in another sheet. The idea is that a user can define a table style for header, rowOdd and rowEven in the Formats sheet, then easily apply it to a selected table using the script.
I've managed to get it working, but only by applying one type of formatting (background colour).
I based my code for reading the code into an array on this article.
As you will hopefully see from my code below, I am only able to read one formatting property into my array.
What I would like to do is read all formatting properties into the array, then apply them to the range in one go. I'm new to this so sorry if my code is a mess!
function formatTable() {
var activeRange = SpreadsheetApp.getActiveSpreadsheet().getActiveRange(); //range to apply formatting to
var arr = new Array(activeRange.getNumRows());
var tableStyleSheet = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("Formats"); //location of source styles
var tableColours = {
header: tableStyleSheet.getRange(1, 1, 1).getBackground(),
rowEven: tableStyleSheet.getRange(2, 1, 1).getBackground(),
rowOdd: tableStyleSheet.getRange(3, 1, 1).getBackground()
}
for (var x = 0; x < activeRange.getNumRows(); x++) {
arr[x] = new Array(activeRange.getNumColumns());
for (var y = 0; y < activeRange.getNumColumns(); y++) {
x == 0 ? arr[x][y] = tableColours.header :
x % 2 < 1 ? arr[x][y] = tableColours.rowOdd : arr[x][y] = tableColours.rowEven;
Logger.log(arr);
}
}
activeRange.setBackgrounds(arr);
}
Thanks!
I might be wrong but based from the list of methods given in Class Range, feature to save or store formatting details currently do not exist yet.
However, you may want to try using the following:
copyFormatToRange(gridId, column, columnEnd, row, rowEnd) or copyFormatToRange(sheet, column, columnEnd, row, rowEnd) wherein it copies the formatting of the range to the given location.
moveTo(target) wherein it cuts and paste (both format and values) from this range to the target range.
Did you know that you can get all of the different formatting elements for a range straight into an array?
E.g.
var backgrounds = sheet.getRange("A1:D50").getBackgrounds();
var fonts = sheet.getRange("A1:D50").getFontFamilies();
var fontcolors = sheet.getRange("A1:D50").getFontColors();
etc.
However, there's no way to get all of the formatting in one call unfortunately, so you have to handle each element separately. Then you can apply all of the formats in one go:
targetRng.setFontColors(fontcolors);
targetRng.setBackgrounds(backgrounds);
and so on.
I have a grid for terminals, What I want to do now is to display the selected terminals into another grid. I am able to get the selected terminals with this code:
var sel = scope.getTerminalGrid().getSelectionModel().getSelection();
var user = scope.getProfinfo().getForm().getValues();
for(var i=0; i < sel.length; i++)
{
var terminals = sel[i].data;
}
You can simply get the data (in your case above its the 'sel' variable) and then load it in the second grid store.
Something like that:
var sel = scope.getTerminalGrid().getSelectionModel().getSelection();
var selRecords = sel.getSelection();
var secondGrid = scope.getMySecondGrid();
var secondStore = secondGrid.getStore();
secondGrid.removeAll(); //Clear the data
secondGrid.add(selRecords);
Of course, I separated all in a lot of variables, you can abstract some of them.
you can do it multiple ways, one is with a drag and drop grid group, another is grabbing the grid of second store like so .
var secondGrid = scope.getMySecondGrid()
secondGrid.getStore()
the store is the powerful underlying data structure of the grid. You can then load any data you want in there.
EDIT I rewrote my question to make it more understandable after the conversation below with Tony (thanks!).
GOAL Render multiple line graphs (let's say 2) in the same chart. The charts have different x/y value pairs. For one x-value, I do not know both y-values.
I am using Silverlight. The classes available for this are SerialChart and LineGraph. The data source for both graphs is the same and is set at the SerialChart level. The name of the property for the x-axis is also defined there for both graphs (CategoryValueMemberPath).
As suggested by the amCharts documentation, we need to create objects that have a property for the category axis (x-axis) and then one property per graph. Let's call them "Graph1" and "Graph2". So the data source looks something like this:
List<MyClass> data = new List<MyClass>()
{
new MyClass() { Category = 0.1, Graph1 = 0.14, Graph2 = ??? }
,new MyClass() { Category = 0.15, Graph1 = ???, Graph2 = 0.05 }
,new MyClass() { Category = 0.2, Graph1 = 0.35, Graph2 = ??? }
,new MyClass() { Category = 0.18, Graph1 = ???, Graph2 = 0.12 }
... and so on ...
}
PROBLEM What am I supposed to do about the "???" values? I do not have the actual value for that graph for that category value.
If I do not set a value, the default value of 0.0 is assumed and it draws a spike to the x-axis. If I set the previously known Graph1/Graph2 value, then it creates a horizontal connection where there is not supposed to be one. I am basically altering the graph which leads to a wrong result.
So how do I solve this? I am getting the feeling that amCharts do not support this scenario.
You need to add two 'value' axes, one in the X direction and one in the Y direction (imagine, like a bubble chart).
// AXES
// X
var xAxis = new AmCharts.ValueAxis();
xAxis.position = "bottom";
xAxis.gridAlpha = 0.1;
xAxis.autoGridCount = true;
chart.addValueAxis(xAxis);
// Y
var yAxis = new AmCharts.ValueAxis();
yAxis.position = "left";
yAxis.gridAlpha = 0.1;
yAxis.autoGridCount = true;
chart.addValueAxis(yAxis);
Merge all your data points into one array with a common X axis field name ('x' in my example) and for points on line 1, add a property of 'line1' with its value, and for points on line 2, add a property of 'line2'.
For example, your data would look like this:
var chartData = [
{x:0.1,line1:0.25},
{x:0.246,line1:0.342},
{x:0.12,line2:0.16},
{x:0.3,line2:0.485}
];
Then add a 'graph' for each line to your chart specifying where to get the value from in the object array.
// GRAPHS
var graph = new AmCharts.AmGraph();
graph.xField = "x";
graph.yField = "line1";
graph.lineAlpha = 1;
graph.lineColor = '#FF9E01';
chart.addGraph(graph);
var graph2 = new AmCharts.AmGraph();
graph2.xField = "x";
graph2.yField = "line2";
graph.lineAlpha = 1;
graph2.lineColor = '#9EFF01';
chart.addGraph(graph2);
I've put all this into a Fiddle for you - http://jsfiddle.net/64EWx/