Converting int to char in C - c

Question

Right now I am trying to convert an int to a char in C programming. After doing research, I found that I should be able to do it like this:
int value = 10;
char result = (char) value;
What I would like is for this to return 'A' (and for 0-9 to return '0'-'9') but this returns a new line character I think.
My whole function looks like this:
char int2char (int radix, int value) {
if (value < 0 || value >= radix) {
return '?';
}
char result = (char) value;
return result;
}

Answer 1

to convert int to char you do not have to do anything
char x;
int y;
/* do something */
x = y;
only one int to char value as the printable (usually ASCII) digit like in your example:
const char digits[] = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ";
int inttochar(int val, int base)
{
return digits[val % base];
}
if you want to convert to the string (char *) then you need to use any of the stansdard functions like sprintf, itoa, ltoa, utoa, ultoa .... or write one yourself:
char *reverse(char *str);
const char digits[] = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ";
char *convert(int number, char *buff, int base)
{
char *result = (buff == NULL || base > strlen(digits) || base < 2) ? NULL : buff;
char sign = 0;
if (number < 0)
{
sign = '-';
}
if (result != NULL)
{
do
{
*buff++ = digits[abs(number % (base ))];
number /= base;
} while (number);
if(sign) *buff++ = sign;
if (!*result) *buff++ = '0';
*buff = 0;
reverse(result);
}
return result;
}

Answer 2

A portable way of doing this would be to define a
const char* foo = "0123456789ABC...";
where ... are the rest of the characters that you want to consider.
Then and foo[value] will evaluate to a particular char. For example foo[0] will be '0', and foo[10] will be 'A'.
If you assume a particular encoding (such as the common but by no means ubiquitous ASCII) then your code is not strictly portable.

Answer 3

Characters use an encoding (typically ASCII) to map numbers to a particular character. The codes for the characters '0' to '9' are consecutive, so for values less than 10 you add the value to the character constant '0'. For values 10 or more, you add the value minus 10 to the character constant 'A':
char result;
if (value >= 10) {
result = 'A' + value - 10;
} else {
result = '0' + value;
}

Answer 4

Converting Int to Char
I take it that OP wants more that just a 1 digit conversion as radix was supplied.
To convert an int into a string, (not just 1 char) there is the sprintf(buf, "%d", value) approach.
To do so to any radix, string management becomes an issue as well as dealing the corner case of INT_MIN
The following C99 solution returns a char* whose lifetime is valid to the end of the block. It does so by providing a compound literal via the macro.
#include <stdio.h>
#include <stdlib.h>
#include <limits.h>
// Maximum buffer size needed
#define ITOA_BASE_N (sizeof(unsigned)*CHAR_BIT + 2)
char *itoa_base(char *s, int x, int base) {
s += ITOA_BASE_N - 1;
*s = '\0';
if (base >= 2 && base <= 36) {
int x0 = x;
do {
*(--s) = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"[abs(x % base)];
x /= base;
} while (x);
if (x0 < 0) {
*(--s) = '-';
}
}
return s;
}
#define TO_BASE(x,b) itoa_base((char [ITOA_BASE_N]){0} , (x), (b))
Sample usage and tests
void test(int x) {
printf("base10:% 11d base2:%35s base36:%7s ", x, TO_BASE(x, 2), TO_BASE(x, 36));
printf("%ld\n", strtol(TO_BASE(x, 36), NULL, 36));
}
int main(void) {
test(0);
test(-1);
test(42);
test(INT_MAX);
test(-INT_MAX);
test(INT_MIN);
}
Output
base10: 0 base2: 0 base36: 0 0
base10: -1 base2: -1 base36: -1 -1
base10: 42 base2: 101010 base36: 16 42
base10: 2147483647 base2: 1111111111111111111111111111111 base36: ZIK0ZJ 2147483647
base10:-2147483647 base2: -1111111111111111111111111111111 base36:-ZIK0ZJ -2147483647
base10:-2147483648 base2: -10000000000000000000000000000000 base36:-ZIK0ZK -2147483648
Ref How to use compound literals to fprintf() multiple formatted numbers with arbitrary bases?

Answer 5

Check out the ascii table
The values stored in a char are interpreted as the characters corresponding to that table. The value of 10 is a newline

Answer 6

So characters in C are based on ASCII (or UTF-8 which is backwards-compatible with ascii codes). This means that under the hood, "A" is actually the number "65" (except in binary rather than decimal). All a "char" is in C is an integer with enough bytes to represent every ASCII character. If you want to convert an int to a char, you'll need to instruct the computer to interpret the bytes of an int as ASCII values - and it's been a while since I've done C, but I believe the compiler will complain since char holds fewer bytes than int. This means we need a function, as you've written. Thus,
if(value < 10) return '0'+value;
return 'A'+value-10;
will be what you want to return from your function. Keep your bounds checks with "radix" as you've done, imho that is good practice in C.

Answer 7

1. Converting int to char by type casting
Source File charConvertByCasting.c
#include <stdio.h>
int main(){
int i = 66; // ~~Type Casting Syntax~~
printf("%c", (char) i); // (type_name) expression
return 0;
}
Executable charConvertByCasting.exe command line output:
C:\Users\boqsc\Desktop\tcc>tcc -run charconvert.c
B
Additional resources:
https://www.tutorialspoint.com/cprogramming/c_type_casting.htm
https://www.tutorialspoint.com/cprogramming/c_data_types.htm
2. Convert int to char by assignment
Source File charConvertByAssignment.c
#include <stdio.h>
int main(){
int i = 66;
char c = i;
printf("%c", c);
return 0;
}
Executable charConvertByAssignment.exe command line output:
C:\Users\boqsc\Desktop\tcc>tcc -run charconvert.c
B

Answer 8

You can do
char a;
a = '0' + 5;
You will get character representation of that number.

Answer 9

Borrowing the idea from the existing answers, i.e. making use of array index.
Here is a "just works" simple demo for "integer to char[]" conversion in base 10, without any of <stdio.h>'s printf family interfaces.
Test:
$ cc -o testint2str testint2str.c && ./testint2str
Result: 234789
Code:
#include <stdio.h>
#include <string.h>
static char digits[] = "0123456789";
void int2str (char *buf, size_t sz, int num);
/*
Test:
cc -o testint2str testint2str.c && ./testint2str
*/
int
main ()
{
int num = 234789;
char buf[1024] = { 0 };
int2str (buf, sizeof buf, num);
printf ("Result: %s\n", buf);
}
void
int2str (char *buf, size_t sz, int num)
{
/*
Convert integer type to char*, in base-10 form.
*/
char *bufp = buf;
int i = 0;
// NOTE-1
void __reverse (char *__buf, int __start, int __end)
{
char __bufclone[__end - __start];
int i = 0;
int __nchars = sizeof __bufclone;
for (i = 0; i < __nchars; i++)
{
__bufclone[i] = __buf[__end - 1 - i];
}
memmove (__buf, __bufclone, __nchars);
}
while (num > 0)
{
bufp[i++] = digits[num % 10]; // NOTE-2
num /= 10;
}
__reverse (buf, 0, i);
// NOTE-3
bufp[i] = '\0';
}
// NOTE-1:
// "Nested function" is GNU's C Extension. Put it outside if not
// compiled by GCC.
// NOTE-2:
// 10 can be replaced by any radix, like 16 for hexidecimal outputs.
//
// NOTE-3:
// Make sure inserting trailing "null-terminator" after all things
// done.
NOTE-1:
"Nested function" is GNU's C Extension. Put it outside if not
compiled by GCC.
NOTE-2:
10 can be replaced by any radix, like 16 for hexidecimal outputs.
NOTE-3:
Make sure inserting trailing "null-terminator" after all things
done.